Commit Graph

42 Commits

Author SHA1 Message Date
Paul Mundt
178dd0cd28 sh: Add support for SH7723 CPU subtype.
This adds basic support for the SH7723 MobileR2 CPU.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:07 -07:00
Paul Mundt
2ad699080b sh: Initial support for the MX-G CPU.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Paul Mundt
9bbafce2ee sh: Fix occasional FPU register corruption under preempt.
Presently with preempt enabled there's the possibility to be preempted
after the TIF_USEDFPU test and the register save, leading to bogus
state post-__switch_to(). Use an explicit preempt_disable()/enable()
pair around unlazy_fpu()/clear_fpu() to avoid this. Follows the x86
change.

Reported-by: Takuo Koguchi <takuo.koguchi.sw@hitachi.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-03-26 19:02:47 +09:00
Magnus Damm
9109a30e5a sh: add support for sh7366 processor
This patch adds sh7366 cpu supports. Just the most basic things like interrupt
controller, clocks and serial port are included at this point.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-02-14 14:22:10 +09:00
Yoshihiro Shimoda
7d740a066f sh: Add support for SH7763 CPU subtype.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Yoshihiro Shimoda
31a49c4bf8 sh: Add support for SH7721 CPU subtype.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:19:02 +09:00
Paul Mundt
a8f67f4b4d sh: Add SH7263 CPU support.
This adds support for the SH7263 (SH-2A) CPU.

This particular CPU is a superset of SH7203, adding some additional
peripheral blocks and hooking up additional (reserved on SH7203)
vectors in the INTC block.

No visibly nasty surprises, yet..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
6d01f51086 sh: Add SH7203 CPU support.
This adds support for the SH7203 (SH-2A) CPU.

Signed-off-by: Kieran Bingham <kbingham@mpc-data.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt
332fd57b92 sh: Bring the SH-5 FPU in line with the SH-4 FPU API.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:55 +09:00
Paul Mundt
343ac72248 sh: Move over the SH-5 entry.S.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:46 +09:00
Paul Mundt
acb499f0dd sh: Move vsyscall_init() defs up one level.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:44 +09:00
Paul Mundt
76168c21b7 sh: More SH-5 cpuinfo tidying.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:43 +09:00
Paul Mundt
af3c7dfe82 sh: Split out processor.h in to _32 and _64 variants.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:42 +09:00
Paul Mundt
f966918724 sh: Kill off the remaining ST40 cruft.
The ST40 stuff in-tree hasn't built for some time, and hasn't been
updated for over 3 years. ST maintains their own out-of-tree changes
and rebases occasionally, and that's ultimately where all of the ST40
users go anyways.

In order for the ST40 code to be brought up to date most of the stuff
removed in this changeset would have to be rewritten anyways, so there's
very little benefit in keeping the remnants around either.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 11:13:55 +09:00
Paul Mundt
2278caa3c8 sh: Use generic SMP_CACHE_BYTES/L1_CACHE_ALIGN.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-10-30 17:28:52 +09:00
Paul Mundt
cb7af21f7d sh: Use boot_cpu_data for CPU probe.
This moves off of smp_processor_id() and only sets the probe
information for the boot CPU directly. This will be copied out
for the secondaries, so there's no reason to do this each time.

This also allows for some header tidying.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 18:18:39 +09:00
Paul Mundt
09a4df5f0c sh: processor.h needs smp.h
Trivial build fix for SH-2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-27 12:57:35 +09:00
Paul Mundt
2d4a73d5b9 sh: Kill off special boot_cpu_data.
This consolidates the cpu_data definitions and gets rid of the special
boot_cpu_data. It's made a wrapper to the boot CPU, in order to keep
the existing in-tree users happy.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 18:01:40 +09:00
Markus Brunner
3ea6bc3de4 sh: Add SH7720 CPU support.
This adds support for the SH7720 (SH3-DSP) CPU.

Signed-off by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:49 +09:00
Magnus Damm
d89ddd1c84 sh: remove support for sh7300 and solution engine 7300
This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 15:37:57 +09:00
Magnus Damm
870e8a2438 sh: remove support for sh73180 and solution engine 73180
This patch removes old dead code:
- kill off sh73180 cpu support
- get rid of broken solution engine 73180 board support

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-25 10:49:21 +09:00
Paul Mundt
2b1bd1ac5d sh: Preliminary support for the SH-X3 CPU.
This adds basic support for UP SH-X3.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-20 18:27:10 +09:00
Paul Mundt
357d59469c sh: Tidy up dependencies for SH-2 build.
SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-11 15:32:07 +09:00
Paul Mundt
b9601c5e59 sh: Kill off dead SH7604 support.
This was added during 2.5.x, but was never moved along. This
can easily be resurrected if someone has one they wish to work
with, but it's not worth keeping around in its current form.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 11:55:28 +09:00
Nobuhiro Iwamatsu
9465a54fa4 sh: MS7712SE01 board support.
Support the SH7712 (SH3-DSP) Solution Engine reference board.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07 02:10:54 +00:00
Paul Mundt
11c1965687 sh: Fixup cpu_data references for the non-boot CPUs.
There are a lot of bogus cpu_data-> references that only end up working
for the boot CPU, convert these to current_cpu_data to fixup SMP.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
aec5e0e1c1 sh: Use a per-cpu ASID cache.
Previously this was implemented using a global cache, cache
this per-CPU instead and bump up the number of context IDs to
match NR_CPUS.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-02-13 10:54:45 +09:00
Paul Mundt
41504c3972 sh: SH-MobileR SH7722 CPU support.
This adds CPU support for the SH7722.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:09 +09:00
Stuart Menefy
c9f0b1c141 sh: KSTK_EIP/KSTK_ESP consistency.
Two of the fields in /proc/[number]/stat are documented in
proc(5) as:

      kstkesp %lu
	     The current value of esp (stack pointer), as
	     found in the kernel stack page for the process.

      kstkeip %lu
	     The current EIP (instruction pointer).

The SH currently prints the the last SP and PC of the process
inside the kernel, while most other archs use the last user
space values.

This patch modifes the SH to display the user space values.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Stuart Menefy
b5a1bcbee4 sh: Set up correct siginfo structures for page faults.
Remove the previous saving of fault codes into the thread_struct
as they are never used, and appeared to be inherited from x86.

Signed-off-by: Stuart Menefy <stuart.menefy@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:38 +09:00
Paul Mundt
b552c7e8bc sh: Hook SH7785 in to the build system.
Simple 7785 placeholders to start hooking up other bits of code.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:37 +09:00
Yoshinori Sato
b229632abd sh: Add SH-2A platform headers.
Mostly SH-2 wrappers..

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-06 10:45:36 +09:00
Paul Mundt
6b0022305f sh: Proper show_stack/show_trace() implementation.
This splits out some of the previous show_stack() implementation which
was mostly doing the show_trace() work without actually dumping any of
the stack contents. This now gets split in to two sections, where we
do the fetching of the stack pointer and subsequent stack dumping in
show_stack(), while moving the call trace in to show_trace().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-19 16:30:31 +09:00
Paul Mundt
19f9a34f87 sh: Initial vsyscall page support.
This implements initial support for the vsyscall page on SH.
At the moment we leave it configurable due to having nommu
to support from the same code base. We hook it up for the
signal trampoline return at present, with more to be added
later, once uClibc catches up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:33:49 +09:00
Paul Mundt
72c35543f8 sh: Support for L2 cache on newer SH-4A CPUs.
This implements preliminary support for the L2 caches found
on newer SH-4A CPUs.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:27:43 +09:00
Paul Mundt
315bb96824 sh: CPU flags in AT_HWCAP in ELF auxvt.
Encode processor flags in AT_HWCAP in the ELF auxiliary vector.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 18:22:53 +09:00
Paul Mundt
e5723e0eeb sh: Add support for SH7706/SH7710/SH7343 CPUs.
This adds support for the aforementioned CPU subtypes, and cleans
up some build issues encountered as a result.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:38:11 +09:00
Paul Mundt
2991be7252 sh: Fixup __strnlen_user() behaviour.
Drop TIF_USERSPACE and add addr_limit to the thread_info struct.
Subsequently, use that for address checking in strnlen_user() to
ward off bogus -EFAULTs.

Make __strnlen_user() return 0 on exception, rather than -EFAULT.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:07:07 +09:00
Paul Mundt
e86d6b66f5 sh: prefetch()/prefetchw() support.
SH-2/3/4 are able to prefetch, add support for it..

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 14:20:54 +09:00
Chase Venters
f6dc8c5b8e [PATCH] Make cpu_relax() imply barrier() on all arches
During the recent discussion of taking 'volatile' off of the spinlock, I
noticed that while most arches #define cpu_relax() such that it implies
barrier(), some arches define cpu_relax() to be empty.

This patch changes the definition of cpu_relax() for frv, h8300, m68knommu,
sh, sh64, v850 and xtensa from an empty while(0) to the compiler barrier().

Signed-off-by: Chase Venters <chase.venters@clientec.com>
Acked-by: Arjan van de Ven <arjan@Linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-12 12:56:45 -07:00
Paul Mundt
de02797aa7 [PATCH] sh: Cleanup struct sh_cpuinfo for clock framework changes
Now that the clock framework changes have been integrated, the manual clock
accounting that was done in sh_cpuinfo can be dropped.

Also correct a bug with running past the end of the CPU flags when there's a
mismatch between the added flags and printed ones.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:19 -08:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00