Commit Graph

1041 Commits

Author SHA1 Message Date
Richard Purdie
621e4f8e9b [MTD] mtdoops: Use the panic_write function when present
When the MTD provides a panic_write function, use it.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07 10:31:04 +00:00
Richard Purdie
388bbb09b9 [MTD] Add mtd panic_write function pointer
MTDs are well suited for logging critical data and the mtdoops driver
allows kernel panics/oops to be written to flash in a blackbox flight
recorder fashion allowing better debugging and analysis of crashes.

Any kernel oops in user context can be easily handled since the kernel
continues as normal and any queued mtd writes are scheduled. Any kernel
oops in interrupt context results in a panic and the delayed writes will
not be scheduled however. The existing mtd->write function cannot be
called in interrupt context so these messages can never be written to
flash.

This patch adds a panic_write function pointer that drivers can
optionally implement which can be called in interrupt context. It is
only intended to be called when its known the kernel is about to panic
and we need to write to succeed. Since the kernel is not going to be
running for much longer, this function can break locks and delay to
ensure the write succeeds (but not sleep).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07 10:30:48 +00:00
Scott Wood
76b1046716 [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
Signed-off-by: Nick Spence <nick.spence@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-07 10:26:57 +00:00
Joern Engel
2b54aaef7a Claim maintainership for block2mtd and update email addresses
I have been prime author and maintainer of block2mtd from day one, but
neither MAINTAINERS nor the module source makes this fact clear.  And while
I'm at it, update my email addresses tree-wide, as the old address
currently bounces and change my name to "joern" as unicode will likely
continue to cause trouble until the end of this century.

Signed-off-by: Joern Engel <joern@lazybastard.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-06 10:41:09 -08:00
Joe Perches
8e87d7820a drivers/mtd/: Spelling fixes
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 17:22:34 +02:00
Paulius Zaleckas
efad798b9f Spelling fixes: lenght->length
Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:42:53 +02:00
Uwe Kleine-König
a247b5d594 fix typo 'the same the\>'
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 14:59:11 +02:00
Stefan Roese
df66e7167a [MTD] physmap.c: Add support for multiple resources
This patch extends the physmap mapping driver to support multiple
resources for non-identical NOR chips that will be concatenated together
when selected.

This is needed for example for Intel 48F4400 512MBit chips, since they
consist of 2 single different NOR chips with different geometries. The
first (lower) one has botton boot sectors and the 2nd (upper) has top
boot sectors. This currently isn't handled correctly by calling the
physmap driver once with only one resource covering both chips in one
memory region. The same geometrie is used for both chips.

With this patch the following resource structure can be used to
describe the 48F4400 chip correctly:

static struct resource board_nor_resource[] = {
	[0] = {
		.start = 0xf8000000,
		.end = 0xfbffffff,
		.flags = IORESOURCE_MEM,
	},
	[1] = {
		.start = 0xfc000000,
		.end = 0xffffffff,
		.flags = IORESOURCE_MEM,
	}
};

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 22:16:02 +11:00
Scott Wood
1c45f60406 [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 22:14:12 +11:00
David Woodhouse
6208e77e7f Merge git://git.infradead.org/~dedekind/ubi-2.6 2008-02-03 22:07:40 +11:00
Bryan Wu
5eb91034f3 [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:55:16 +11:00
Bryan Wu
f4dda0914e [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
There is no suspend/resume operation in NFC driver at all, currently.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:54:46 +11:00
Li Zefan
a50367784e [MTD] [NAND] Remove unused variable in plat_nand_remove
With CONFIG_MTD_PARTITIONS not set, got this:
drivers/mtd/nand/plat_nand.c:113: warning: unused variable 'pdata'

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:31:52 +11:00
David Woodhouse
b7e23d913a Merge git://git.infradead.org/~kmpark/onenand-mtd-2.6 2008-02-03 18:31:04 +11:00
David Woodhouse
c1f3ee120b Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git 2008-02-03 18:30:32 +11:00
Justin Treon
e619a75ff6 [MTD] Unlocking all Intel flash that is locked on power up.
Patch for unlocking all Intel flash that has instant locking on power up.
The patch has been tested on Intel M18, P30 and J3D Strata Flash.
  1.    The automatic unlocking can be disabled for a particular partition
         in the map or the command line.
     a. For the bit mask in the map it should look like:
         .mask_flags   = MTD_POWERUP_LOCK,
     b. For the command line parsing it should look like:
         mtdparts=0x80000(bootloader)lk
  2.    This will only unlock parts with instant individual block locking.
         Intel parts with legacy unlocking will not be unlocked.

Signed-off-by: Justin Treon <justin_treon@yahoo.com>
Signed-off-by: Jared Hulbert <jaredeh@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:25:16 +11:00
Atsushi Nemoto
842b1a105c [MTD] [NAND] at91_nand: Make mtdparts option can override board info
Call parse_mtd_partitions before checking board's partition_info, so
that "mtdparts=" option can override board's default setting.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:21:01 +11:00
Richard Purdie
79dcd8e9e1 [MTD] mtdoops: Various minor cleanups
Various minor cleaups to mtdoops:
  * Don't support the mtd->erasesize < OOPS_PAGE_SIZE case
  * Tweak printks and make the device mtdoops connects to more visible
  * CON_PRINTBUFFER flag is uneeded

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:19:24 +11:00
Richard Purdie
47c152b88c [MTD] mtdoops: Ensure sequential write to the buffer
Add a spinlock to ensure writes to the mtdoops buffer memory are
sequential and don't race.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:18:58 +11:00
Richard Purdie
6ce0a856c1 [MTD] mtdoops: Perform write operations in a workqueue
Writing to the flash needs to be done in a workqueue. The console
write functions may be called in any context which can lead to
lockups otherwise.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:14:41 +11:00
Richard Purdie
2986bd2a33 [MTD] mtdoops: Add further error return code checking
Add further error return code checks to the mtdoops driver.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:14:35 +11:00
Roel Kluin
0bdf77f85b [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
drivers/mtd/devices/lart.c:119:#define FLASH_DEVICE_16mbit_BOTTOM 0x88f488f4
As was, unless "manufacturer != FLASH_MANUFACTURER" this returned true

Signed-off-by: Roel Kluin <12o3l@tiscali.nl>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:12:09 +11:00
akpm@linux-foundation.org
9308758c50 [UBI] drivers/mtd/ubi/scan.c: fix uninitialized var warning
drivers/mtd/ubi/scan.c: In function 'ubi_scan':
drivers/mtd/ubi/scan.c:772: warning: 'ec' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:10:00 +11:00
akpm@linux-foundation.org
4354c5a4ef [UBI] drivers/mtd/ubi/wl.c: fix uninitialized var warning
drivers/mtd/ubi/wl.c:746: warning: 'pe' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:09:45 +11:00
akpm@linux-foundation.org
5b1defe73a [UBI] drivers/mtd/ubi/cdev.c: unused var
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:09:27 +11:00
Scott Wood
9a310d2119 [MTD] Factor out OF partition support from the NOR driver.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 18:06:48 +11:00
Ilpo Järvinen
c0d2a48a65 [MTD] jedec probe: drop unnecessary forward declarations
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 17:58:05 +11:00
Ilpo Järvinen
53d8855392 [MTD] JEDEC probe: kill some inline bloat
$ codiff $OBJ.old $OBJ
drivers/mtd/chips/jedec_probe.c:
  cfi_jedec_setup  | -320
  jedec_probe_chip | -7073
 2 functions changed, 7393 bytes removed, diff: -7393

drivers/mtd/chips/jedec_probe.c:
  jedec_reset | +1151
 1 function changed, 1151 bytes added, diff: +1151

drivers/mtd/chips/jedec_probe.o:
 3 functions changed, 1151 bytes added, 7393 bytes removed, diff: -6242

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-03 17:55:41 +11:00
Artem Bityutskiy
6dc4a8717f UBI: do not flush queue on each vtbl change
This is just not necessary. We re-write whole layout copy, so
the old contents cannot show up again sice scan process will
drop it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-02-01 13:48:49 +02:00
Kyungmin Park
69d79186dc [MTD] [OneNAND] Use pre-alloced oob buffer instead of local buffer
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:14:01 +09:00
Sheng Yongjie (Sam
978cb38a29 [MTD] [OneNAND] Use the u_char instead of char in oobbuf
In function onenand_verify_oob, local variable oobbuf shall be unsigned char.

In the case of a value is >= 0x80, it's unequal in comparing the value in an unsigned char and signed char.

Signed-off-by: Sheng Yongjie (Sam) <samsheng@trident.com.cn>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:13:24 +09:00
Kyungmin Park
b2581be291 [MTD] [OneNAND] Check the initial bad block using ONENAND_CTRL_ERROR
Some chips don't set the ONENAND_CTRL_LOAD bit.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:12:32 +09:00
Kyungmin Park
e71f04fc92 [MTD] [OneNAND] Get correct density from device ID
Use the higher bits for other purpose.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:11:38 +09:00
Kyungmin Park
b21b72cf33 [MTD] [OneNAND] Consolidate OneNAND operation order
Consolidate OneNAND operation order as OneNAND Spec.
It also doesn't break previous operation order.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:10:28 +09:00
Adrian Hunter
9d2f0b7a3d [MTD] [OneNAND] fix call to onenand_verify when writing subpages
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:07:30 +09:00
Adrian Hunter
d0b36d8cc8 [MTD] [OneNAND] Do not release chip twice
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2008-01-29 17:07:06 +09:00
Matt Reimer
d0bf37932a [MTD] [NAND] fix s3c2410 error correction
The single-bit error correction was, well, incorrect. For determing which
bit to correct it was using P1' P2' P4' P8' instead of P1 P2 P4 P8, and
it was using P16' P32' P64' P128' P256' P512' P1024' P2048' instead of
P16 P32 P64 P128 P256 P512 P1024 P2048.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-26 21:11:38 +08:00
Artem Bityutskiy
e653879c26 UBI: implement atomic LEB change ioctl
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:26 +02:00
Artem Bityutskiy
60c031531a UBI: handle zero-length case
ubi_eba_atomic_leb_change() has to just map the LEB to a free PEB
if data length is zero.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
1b68d0eea5 UBI: simplify internal interfaces
Instead of passing vol_id to all functions and then find
struct ubi_volume, pass struct ubi_volume pointer.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
0411e73531 UBI: do not change file pointer while updating
Since we do not change semantics of seek(), changing the file
pointer while updating does not make much sense.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
91f2d53cd7 UBI: add layout volume information
Add more information about layout volume to make userspace tools
use the macros instead of constants. Also rename UBI_LAYOUT_VOL_ID
to make it consistent with other macros.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
c18a84186c UBI: fix warnings
Old gcc complains:

CC      drivers/mtd/ubi/wl.o
drivers/mtd/ubi/wl.c: In function 'wear_leveling_worker':
drivers/mtd/ubi/wl.c:746: warning: 'pe' may be used uninitialized in this function
CC      drivers/mtd/ubi/scan.o
drivers/mtd/ubi/scan.c: In function 'ubi_scan':
drivers/mtd/ubi/scan.c:772: warning: 'ec' may be used uninitialized in this function
drivers/mtd/ubi/scan.c:772: note: 'ec' was declared here

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
64203195ed UBI: add sanity check
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
2f9270e7fe UBI: remove bogus assertion
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:25 +02:00
Artem Bityutskiy
d536058752 UBI: bugfix: calculate data offset properly
Data offset is VID header offset + VID header size aligned to
the min. I/O unit size up.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:24 +02:00
Artem Bityutskiy
ddc4939161 UBI: amend array size
Since the data offset parameter was removed, the size of
the parameters array is now 2, not 3.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:24 +02:00
Artem Bityutskiy
4ccf8cffa9 UBI: add auto-resize feature
The problem: NAND flashes have different amount of initial bad physical
eraseblocks (marked as bad by the manufacturer). For example, for 256MiB
Samsung OneNAND flash there might be from 0 to 40 bad initial eraseblocks,
which is about 2%. When UBI is used as the base system, one needs to know
the exact amount of good physical eraseblocks, because this number is
needed to create the UBI image which is put to the devices during
production. But this number is not know, which forces us to use the
minimum number of good physical eraseblocks. And UBI additionally
reserves some percentage of physical eraseblocks for bad block handling
(default is 1%), so we have 1-3% of PEBs reserved at the end, depending
on the amount of initial bad PEBs. But it is desired to always have
1% (or more, depending on the configuration).

Solution: this patch adds an "auto-resize" flag to the volume table.
The volume which has the "auto-resize" flag will automatically be re-sized
(enlarged) on the first UBI initialization. UBI clears the flag when
the volume is re-sized. Only one volume may have the "auto-resize" flag.

So, the production UBI image may have one volume with "auto-resize"
flag set, and its size is automatically adjusted on the first boot
of the device.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:24 +02:00
Artem Bityutskiy
896c0c06aa UBI: use bit-fields
Save 12 bytes of RAM per volume by using bit-fields instead of integers.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:24 +02:00
Artem Bityutskiy
ae616e1be1 UBI: fix warnings
drivers/mtd/ubi/cdev.c: In function ‘vol_cdev_read’:
drivers/mtd/ubi/cdev.c:187: warning: unused variable ‘vol_id’
CC [M]  drivers/mtd/ubi/kapi.o
drivers/mtd/ubi/kapi.c: In function ‘ubi_leb_erase’:
drivers/mtd/ubi/kapi.c:483: warning: unused variable ‘vol_id’
drivers/mtd/ubi/kapi.c: In function ‘ubi_leb_unmap’:
drivers/mtd/ubi/kapi.c:544: warning: unused variable ‘vol_id’
drivers/mtd/ubi/kapi.c: In function ‘ubi_leb_map’:
drivers/mtd/ubi/kapi.c:582: warning: unused variable ‘vol_id’

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:24 +02:00
Artem Bityutskiy
b9a06623d9 UBI: get rid of ubi_ltree_slab
This slab cache is not really needed since the number of objects
is low and the constructor does not make much sense because we
allocate oblects when doint I/O, which is way slower then allocation.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25 16:41:24 +02:00
Tony Jones
a98894ab02 mtd: Convert from class_device to device for MTD/mtdchar
struct class_device is going away, this converts the code to use struct
device instead.

Signed-off-by: Tony Jones <tonyj@suse.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:06 -08:00
Matt Reimer
4fac9f6984 [MTD] [NAND] make s3c2410 indicate an error for multi-bit read errors
If there were multiple bit errors in the data s3c2410_nand_correct_data()
was returning 0 (no error) instead of -1, so the upper layers (like JFFS2)
would not know the data is corrupt.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-12 14:46:31 +00:00
Massimo Cirillo
646fd12784 cache invalidation error for buffered write
The bug causes corruptions of data read from flash.

The original code performs cache invalidation from "adr" to "adr + len"
in do_write_buffer().  Since len and adr could be updated in the code
before invalidation - it causes improper setting of cache invalidation
regions.

Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Signed-off-by: Giuseppe D'Eliseo <giuseppedeliseo@gmail.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woohouse <dwmw2@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-11 11:44:37 -08:00
Bartlomiej Sieka
de7921f01a [MTD] [NOR] Fix incorrect interface code for x16/x32 chips
According to "Common Flash Memory Interface Publication 100" dated December 1,
2001, the interface code for x16/x32 chips is 0x0005, and not 0x0004 used so
far.

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-10 22:07:12 +00:00
Scott Wood
78b65179d0 [MTD] [NAND] Don't panic if a controller driver does ecc its own way.
Some hardware, such as the enhanced local bus controller used on some
mpc83xx chips, does ecc transparently when reading and writing data, rather
than providing a generic calculate/correct mechanism that can be exported to
the nand subsystem.

The subsystem should not BUG() when calculate, correct, or hwctl are
missing, if the methods that call them have been overridden.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-08 07:51:57 +00:00
David Woodhouse
71053fb1c6 [MTD] [MAPS] Remove Photron PNC-2000 map driver
It should be done as a physmap device, and people keep turning it on and
whining about it.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-08 07:46:23 +00:00
David Scidmore
e9d8d48253 [MTD] mtdchar.c: ioctl always returns 0 as size written for ppc64
"include/linux/mtd/mtd.h" declares "mtd_oob_ops.retlen" as size_t, which
is 64 bits on targets with a 64 bit addressing. The MEMWRITEOOB ioctl
calls copy_to_user() to write it back to "mtd_oob_buf.length", which is
declared in "include/linux/mtd-abi.h" as uint32_t. Since powerpc is a
big endian architecture, this only copies the upper 32 bits of the
address, which is always 0.

Signed-off-by: David Scidmore <dscidmore@xes-inc.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-01-08 07:46:12 +00:00
Artem Bityutskiy
4b3cc34061 UBI: bugfix: do not forget to increment vol_count
When creating a new volume, do not forget to increment the
vol_count variable.

Also, users are not interested in internal volumes, so do not show
them in the volumes_count sysfs file.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:18 +02:00
Artem Bityutskiy
aeddb87718 UBI: do not support kiB
Be strict and accept only KiB, MiB and GiB, not Kib, not kib, etc.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:18 +02:00
Artem Bityutskiy
b6b76ba466 UBI: add mtd_num sysfs attribute
Expose number or the underlying MTD device in sysfs.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
d1f3dd6cc0 UBI: fix mtd device string parsing
UBI allows to specify MTD device name or number when the module is being
loaded. When parsing MTD device identity string, it first tries to treat
it as device NAME, and if that fails, it treats it as device number.

Make it vice-versa as this is more logical and makes less troubles when
you have an MTD device named "1" and try to load mtd1 which has different
name. This is especially easy to hit when gluebi is enabled.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
783b273afa UBI: use separate mutex for volumes checking
Introduce a separate mutex which serializes volumes checking,
because we cammot really use volumes_mutex - it cases reverse
locking problems with mtd_tbl_mutex when gluebi is used -
thanks to lockdep.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
897a316c9e UBI: handle attach ioctl
Actually implement the MTD device attach/detach handlers.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
dd38fccfbc UBI: remove data_offset
'data_offset' parameter does not really make sense and it is not
needed. Get rid of it.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
cdfa788acd UBI: prepare attach and detach functions
Prepare the attach and detach functions to by used outside of
module initialization:

* detach function checks reference count before detaching
* it kills the background thread as well

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
e73f4459d9 UBI: add UBI devices reference counting
This is one more step on the way to "removable" UBI devices. It
adds reference counting for UBI devices. Every time a volume on
this device is opened - the device's refcount is increased. It
is also increased if someone is reading any sysfs file of this
UBI device or of one of its volumes.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
9f961b5756 UBI: add UBI control device
This patch is a preparation to make UBI devices dynamic. It
adds an UBI control device which has dynamically allocated
major number and registers itself as "ubi_ctrl". It does not
do anything so far. The idea is that this device will allow
to attach/detach MTD devices from userspace.

This is symilar to what the Linux device mapper has.

The next things to do are:
* Fix UBI, because it now assumes UBI devices cannot go away
* Implement control device ioctls which will attach/detach MTD
  devices

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:17 +02:00
Artem Bityutskiy
16f557ecbf UBI: fix comment
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
593dd33c92 UBI: fix ubi_wl_flush
The flush function should finish all the pending jobs. But if
somebody else is doing a work, this function should wait and let
it finish.

This patche uses rw semaphore for synchronization purpose - it
just looks quite convinient.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
458dbb3d07 UBI: fix printk
Add proper log level to printk's.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
43f9b25a9c UBI: bugfix: protect from volume removal
When the WL worker is moving an LEB, the volume might go away
occasionally. UBI does not handle these situations correctly.

This patch introduces a new mutex which serializes wear-levelling
worker and the the 'ubi_wl_put_peb()' function. Now, if one puts
an LEB, and its PEB is being moved, it will wait on the mutex.
And because we unmap all LEBs when removing volumes, this will make
the volume remove function to wait while the LEB movement
finishes.

Below is an example of an oops which should be fixed by this patch:

Pid: 9167, comm: io_paral Not tainted (2.6.24-rc5-ubi-2.6.git #2)
EIP: 0060:[<f884a379>] EFLAGS: 00010246 CPU: 0
EIP is at prot_tree_del+0x2a/0x63 [ubi]
EAX: f39a90e0 EBX: 00000000 ECX: 00000000 EDX: 00000134
ESI: f39a90e0 EDI: f39a90e0 EBP: f2d55ddc ESP: f2d55dd4
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process io_paral (pid: 9167, ti=f2d54000 task=f72a8030 task.ti=f2d54000)
Stack: f39a95f8 ef6aae50 f2d55e08 f884a511 f88538e1 f884ecea 00000134 00000000
       f39a9604 f39a95f0 efea8280 00000000 f39a90e0 f2d55e40 f8847261 f8850c3c
       f884eaad 00000001 000000b9 00000134 00000172 000000b9 00000134 00000001
Call Trace:
 [<c0105227>] show_trace_log_lvl+0x1a/0x30
 [<c01052e2>] show_stack_log_lvl+0xa5/0xca
 [<c01053d6>] show_registers+0xcf/0x21b
 [<c0105648>] die+0x126/0x224
 [<c0119a62>] do_page_fault+0x27f/0x60d
 [<c037dd62>] error_code+0x72/0x78
 [<f884a511>] ubi_wl_put_peb+0xf0/0x191 [ubi]
 [<f8847261>] ubi_eba_unmap_leb+0xaf/0xcc [ubi]
 [<f8843c21>] ubi_remove_volume+0x102/0x1e8 [ubi]
 [<f8846077>] ubi_cdev_ioctl+0x22a/0x383 [ubi]
 [<c017d768>] do_ioctl+0x68/0x71
 [<c017d7c6>] vfs_ioctl+0x55/0x271
 [<c017da15>] sys_ioctl+0x33/0x52
 [<c0104152>] sysenter_past_esp+0x5f/0xa5
 =======================

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
d2c4685509 UBI: improve comment
Explain better the purpose of thie 'move_to_put' stuff.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
d19bafd99d UBI: add PID to debugging prints
Also, use single dbg_msg() macro for all prints.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
40e4d0c166 UBI: tweak volumes locking some more
Make the code more consistent by requiring the caller to lock the
ubi->volume_mutex, because this is what we do for updates.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
d05c77a816 UBI: introduce volume refcounting
Add ref_count field to UBI volumes and remove weired "vol->removed"
field. This way things are better understandable and we do not have
to do whold show_attr operation under spinlock.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:16 +02:00
Artem Bityutskiy
db6e5770ef UBI: simplify error handling
If we fail halfway through sysfs file creation, we may just call
sysfs remove function and it will delete all the files we created.
For non-existing files it will also be OK - the remove functions
just return -ENOENT.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
35ad5fb76c UBI: fix and cleanup volume opening functions
This patch fixes error codes of the functions - if the device number
is out of range, -EINVAL should be returned. It also removes unneeded
try_module_get call from the open by name function.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
fc75a1e166 UBI: fix error path
Error path in volume creation is bogus. First of, it ovverrides the
'err' variable and returns zero to the caller. Second, ubi_assert()
in the release function is wrong.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
450f872a8e UBI: get device when opening volume
When a volume is opened, get its kref via get_device() call.
And put the reference when closing the volume. With this, we
may have a bit saner volume delete.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
c63a491d37 UBI: add some more comments
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
cae0a77125 UBI: tweak volumes locking
Transform vtbl_mutex to volumes_mutex - this just makes code
easier to understand.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
89b96b6929 UBI: improve internal interfaces
Pass volume description object to the EBA function which makes
more sense, and EBA function do not have to find the volume
description object by volume ID.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
77c722dde9 UBI: bugfix: dont oops with NULL module parameter
E.g., it oopsed in case of: modprobe ubi mtd = 0

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
b96bf4c33d UBI: remove ubi_devices_cnt
This global variablea is not really needed, remove it

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:15 +02:00
Artem Bityutskiy
06b68ba156 UBI: create ubi_wl_entry slab on initialization
Similarly to ltree_entry_slab, it makes more sense to create
and destroy ubi_wl_entry slab on module initialization/exit.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
3a8d464286 UBI: create ltree_entry slab on initialization
Since the ltree_entry slab cache is a global entity, which is
used by all UBI devices, it is more logical to create it on
module initialization time and destro on module exit time.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
01f7b309e4 UBI: improve error messages
Always print error code with error messages, sometimes it is
extremely helpful info.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
49dfc29928 UBI: remove redundant field
Remove redundant ubi->major field - we have it in ubi->cdev.dev
already.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
732aeacff6 UBI: minor tidy-ups
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Jesper Juhl
54b2c8f93d UBI: silence a warning
This patch silences the following warning :

  drivers/mtd/ubi/vmt.c:73: warning: 'ret' may be used uninitialized in this function

gcc can't see that we always initialize ret in all situations where it is
actually used. The one case where it's not initialized is when we BUG(),
but gcc doesn't know that we won't then continue and use an uninitialized
'ret'.

This patch results in code that does exactely the same as before, but it
also makes gcc shut up, so we generate one less line of warning noise.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
393852ecfe UBI: add ubi_leb_map interface
The idea of this interface belongs to Adrian Hunter. The
interface is extremely useful when one has to have a guarantee
that an LEB will contain all 0xFFs even in case of an unclean
reboot. UBI does have an 'ubi_leb_erase()' call which may do
this, but it is stupid and ineffecient, because it flushes whole
queue. I should be re-worked to just be a pair of unmap,
map calls.

The user of the interfaci is UBIFS at the moment.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
94780d4de2 UBI: bugfix: allocate mandatory EBs first
First allocate the necessary eraseblocks, then the optional ones.
Otherwise it allocates all PEBs for bad EB handling, and fails
on then following EBA LEB allocation.

Reported-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:14 +02:00
Artem Bityutskiy
2362a53ec5 UBI: fix error code in ubi_io_read()
When NAND detects an ECC error, it returns -EBADMSG. It does not
stop reading requested data if one page has an ECC error, it keeps
going and reads all the requested data. If it fails to read all
the data, it does not return -EBADMSG, but returns the error code
which reflects the reason of the failure.

But some drivers may have bugs (e.g., OneNAND had) and stop reading
after the first ECC error, so it returns -EBADMSG. In turn, UBI
propagates this up to the caller. The caller will treat this as
"all the requested data was read, but there was an ECC error".

So we change the error code to -EIO if it is -EBADMSG and the read
length is less then the requested length. We also add an assertion,
so if UBI debugging is enabled, UBI will bug.

Pointed-to-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-12-26 19:15:13 +02:00
Peter Korsgaard
235d6200ea [MTD] mtdoops cleanup
Use memcpy instead of open coding a copy loop.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 14:00:16 +00:00
Peter Korsgaard
256331d53a [MTD] mtdoops: Document usage in Kconfig
Add usage instructions to Kconfig for mtdoops driver.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 14:00:06 +00:00
Tzachi Perelstein
2a1dba2931 [MTD] [NAND] Marvell Orion device bus NAND controller
Driver for the device bus NAND controller in the Marvell Orion family
of ARM SoCs.

Signed-off-by: Tzachi Perelstein <tzachi@marvell.com>
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Acked-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 13:03:46 +00:00
David Woodhouse
cec80bf2cc [MTD] [NOR] Attempt to clean up the JEDEC unlock address confusion
Use a single unlock address, adjust it for the device type in the
knowledge that it'll be adjusted back again. This has the desirable
effect of masking out the least significant bit of the address for x16
devices.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 13:01:21 +00:00
David Woodhouse
f6f0f81895 [MTD] [NOR] Fix overflow check in jedec_probe
Having laid the code out so that it's easier to read instead of sticking
to the 80-column guideline even when it doesn't make sense, a bug is
immediately spotted... we were only checking _one_ of the unlock
addresses to see if it runs off the end of the map.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:49:38 +00:00
David Woodhouse
5d3cce3b8e [MTD] [NOR] Clean up jedec_probe, remove unlock address arrays
This should have no functional effects -- we've been ignoring all but
the first address in the array for a long time, and using it only to
indicate which device types are supported.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:48:57 +00:00
David Woodhouse
ce37ab42ad [MTD] Always initialise mutex in new mtd_blktrans_dev.
We were only initialising the mutex in the case where the new device was
automatically allocated the highest minor number. If the caller
specified a minor number, or if it filled in a free slot which was made
by a previous device deregistering, the mutex wouldn't get initialised
when we jumped out of the loop.

Reported by Monte Copeland <catboat@texas.net>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-12-03 12:46:12 +00:00
Egor Martovetsky
846fc31d06 [MTD] [NAND] pasemi_nand driver
Plumbing for NAND connected via localbus on PA Semi PWRficient-based
boards.

From: Egor Martovetsky <egor@pasemi.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-29 00:47:13 +00:00
Ben Dooks
03680b1e00 [MTD] [NAND] S3C2410 correctly set nFCE over resume
Ensure the nFCE line is de-asserted over suspend and
then re-initialised when the system resumes. This is
to ensure that the NAND is kept in lowest power mode
over suspend (power settings are only specified for
nFCE inactive) as well as fixing the Simtec Osiris
which relies on nFCE being inactive.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-28 11:57:45 +00:00
Stanislav Brabec
73061e4c2d [MTD] fix CONFIG_MTD_SHARP_SL if CONFIG_MTD=m
Sharp Zaurus SL-C3200 with CONFIG_MTD=m and CONFIG_MTD_SHARP_SL=y (as it
is bool) lost support for the ROM flash. With CONFIG_MTD=y it has no
problems.

It is caused by losing of compiled code of
drivers/mtd/maps/sharpsl-flash.o.
It was linked to drivers/mtd/maps/built-in.o and drivers/mtd/built-in.o,
but lost and not linked to drivers/built-in.o (because CONFIG_MTD!=y).

Patch below fixes this problem by creating sharpsl-flash.ko (and the
code works correctly as a module).

Signed-off-by: Stanislav Brabec <utx@penguin.cz>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-28 11:56:19 +00:00
Andrew Victor
cccb45d4b3 [MTD] mtd_dataflash: Incorrect compare-after-write check
After writing to a Dataflash page, the built-in compare operation is
used to check that the page was successfully written.  A logic bug in
checking the results of the comparison currently causes the compare to
never fail.

This bug was originally in the legacy at91_dataflash.c driver.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-28 11:55:32 +00:00
Alexander Belyakov
6c24e4161e [MTD] [NOR] Prevent erase command invocation on suspended chip
while running stress tests we have met cfi_cmdset_0001.c driver issue.
Working on multipartitional devices with erase suspend on write
feature enabled it is possible to get erase operation invoked on chip
with suspended erase. get_chip() looses information about earlier
suspended erase and new erase operation gets issued. New erase
operations report successful completion, but blocks remain dirty
causing, for example, JFFS2 error messages like:

...
Newly-erased block contained word 0x20031985 at offset 0x00200000
Newly-erased block contained word 0x20031985 at offset 0x00280000
Newly-erased block contained word 0x20031985 at offset 0x00240000
...

The patch below fixes that issue.

Signed-off-by: Alexander Belyakov <alexander.belyakov@intel.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-26 15:54:16 +00:00
Adrian Hunter
5f4d47d5d1 [MTD] [OneNAND] Do not stop reading for ECC errors
When an ECC error occurs, the read should be completed
anyway before returning -EBADMSG.  Returning -EBADMSG
straight away is incorrect.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-26 13:16:29 +00:00
Alexey Korolev
b1c9c9be6d [MTD] [NOR] Support Intel P3x flash support with CFI version 1.5
Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-23 09:35:41 +00:00
David Howells
8547e583a1 [MTD] [NOR] Add support for the SST 39VF1601 flash chip
Add support for the SST 39VF1601 flash chip.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-11-09 22:34:07 +00:00
Hans-Christian Egtvedt
d10a39d1a5 [MTD] [NOR] More CFI fixups for Atmel chips
Convert CFI tables from Atmel cmdset_0001 chips to Intel format and set
BufWrite timeouts to 0 for Atmel cmdset_0001 and cmdset_0002 chips.
Some chips may indicate support for buffered writes even though they
only support dual-word writes.

The CFI fixup must run before fixup_use_write_buffers for this to work.

Signed-off-by: Håvard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-30 12:06:42 -04:00
Valentine Barshak
4edaf56e0f MTD: small physmap_of partition parsing fixes
Use of_get_next_child for proper ref counting as suggested by Stephen Rothwell
and remove add_mtd_partitions from parse_partitions to avoid duplicate
mtd device registration for RedBoot partitions.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Heckled-for-on-IRC-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-30 08:54:39 -04:00
Michael Hennerich
a25b7fee53 [MTD] [NAND] Add Blackfin BF52x support in bf5xx_nand driver
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-30 08:50:46 -04:00
David Woodhouse
3c441baa03 [MTD] Skip bad blocks when checking for RedBoot partition table
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-28 21:57:02 -04:00
David Woodhouse
9c37f3329a [MTD] [NAND] Check for RedBoot partitions on CAFÉ NAND
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-28 21:56:39 -04:00
Jeff Garzik
06efcad0d4 Eliminate pointless casts from void* in a few driver irq handlers.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-23 19:53:16 -04:00
Alexey Korolev
5a37cf19ef [MTD] [NOR] Fix deadlock in Intel chip driver caused by get_chip recursion
This patch solves kernel deadlock issue seen on JFFF2 simultaneous 
operations. Detailed investigation of the issue showed that the kernel 
deadlock is caused by tons of recursive get_chip calls.

Signed-off-by: Alexey Korolev <akorolev@infradead.org>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-23 12:07:52 +01:00
Kyungmin Park
c21f900cb8 [MTD] [OneNAND] Fix wrong free the static address in onenand_sim
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-22 09:57:28 +01:00
Jörn Engel
eb68450715 [MTD] [NAND] Replace -1 with -EBADMSG in nand error correction code
Magic numerical values are just bad style.  Particularly so when
undocumented.

Signed-off-by: Jörn Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20 22:30:54 +01:00
Matt Reimer
c32b8dcc45 [MTD] [NAND] treat any negative return value from correct() as an error
Treat any negative return value from a NAND driver's correct() function
as a failure, rather than just -1.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20 22:27:22 +01:00
Artem Bityutskiy
39e73fc10e [MTD] [NAND] nandsim: bugfix in initialization
NAND of > 32MiB in size use 4 bytes in address cycle, not 3.

Reported-by: bhsong <bhsong@augustatek.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20 15:00:29 +01:00
Dave Jones
42265940ed [MTD] Fix typo in Alauda config option help text.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Joern Engel <joern@logfs.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20 14:59:26 +01:00
Matt Reimer
b773bb2e70 [MTD] [NAND] add s3c2440-specific read_buf/write_buf
Add read_buf/write_buf for s3c2440, which can read/write 32 bits at a
time rather than just 8. In my testing on an s3c2440a running at 400 MHz
with a 100 MHz HCLK, read performance improves by 36% (from 5.19 MB/s
to 7.07 MB/s).

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20 14:54:26 +01:00
Randy Dunlap
19e75ea72b [MTD] [OneNAND] onenand-sim: fix kernel-doc and typos
Correct kernel-doc notation and descriptions.
Correct other typos.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-20 14:11:44 +01:00
Matt LaPlante
01dd2fbf0d typo fixes
Most of these fixes were already submitted for old kernel versions, and were
approved, but for some reason they never made it into the releases.

Because this is a consolidation of a couple old missed patches, it touches both
Kconfigs and documentation texts.

Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 01:34:40 +02:00
Pavel Emelyanov
ba25f9dcc4 Use helpers to obtain task pid in printks
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.

The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.

[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:43 -07:00
Joe Perches
898eb71cb1 Add missing newlines to some uses of dev_<level> messages
Found these while looking at printk uses.

Add missing newlines to dev_<level> uses
Add missing KERN_<level> prefixes to multiline dev_<level>s
Fixed a wierd->weird spelling typo
Added a newline to a printk

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: James Smart <James.Smart@Emulex.Com>
Cc: Andrew Vasquez <andrew.vasquez@qlogic.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:28 -07:00
Christoph Lameter
4ba9b9d0ba Slab API: remove useless ctor parameter and reorder parameters
Slab constructors currently have a flags parameter that is never used.  And
the order of the arguments is opposite to other slab functions.  The object
pointer is placed before the kmem_cache pointer.

Convert

        ctor(void *object, struct kmem_cache *s, unsigned long flags)

to

        ctor(struct kmem_cache *s, void *object)

throughout the kernel

[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 08:42:45 -07:00
Linus Torvalds
355aaffdaf Reinstate lost flush_ioremap_region() fix to pxa2xx-flash driver
Commit 90833fdab8 ("[ARM] 4554/1: replace
consistent_sync() with flush_ioremap_region()") introduced a new
"flush_ioremap_region()" function to be used by the MTD mainstone-flash
and lubbock-flash drivers to fix a regression from around 2.6.18.

Those drivers were independently merged into a single driver by Todd
Poynor in commit e644f7d628 ("[MTD] MAPS:
Merge Lubbock and Mainstone drivers into common PXA2xx driver")

Later, those two commits were merged into the main MTD tree by commit
b160292cc2 ("Merge Linux 2.6.23") by David
Woodhouse, but in that merge, the fix to use flush_iomap_region() got
lost (as it was to files that now no longer existed).

This reinstates the fix in the new driver.

Noticed-by: Russell King <rmk@arm.linux.org.uk>
Tested-and-acked-by: Nicolas Pitre <nico@cam.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15 12:55:20 -07:00
Al Viro
64a6f9500d signedness: module_param_array nump argument
... should be unsigned int

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-14 12:41:52 -07:00
David Woodhouse
e3d18658d4 Merge branch 'master' of git://git.infradead.org/~dedekind/ubi-2.6 2007-10-14 14:29:00 +01:00
Chris Paulson-Ellis
a2e1b833d9 [MTD] fix mtdconcat for subpage-write NAND
This allows the mtdconcat driver to work with NAND flash devices that
support sub-page writes.

Signed-off-by: Chris Paulson-Ellis <chris@edesix.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-14 13:38:02 +01:00
Adrian Hunter
3cd3a86b6f [MTD] [OneNAND] Avoid deadlock in erase callback; release chip lock first.
When the erase callback performs some other action on the flash, it's
highly likely to deadlock unless we actually release the chip lock
before calling it.

This patch mirrors that same change already done for NAND.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-14 13:37:53 +01:00
Adrian Hunter
30a7eb298a [MTD] [OneNAND] Return only negative error codes
The OneNAND driver was confusing JFFS2 by returning positive error
codes.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-14 13:37:41 +01:00
Adrian Hunter
34627f0e76 [MTD] [OneNAND] Synchronize block locking operations
Ensure OneNAND's block locking operations are synchronized
like all other operations.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-14 13:37:28 +01:00
Artem Bityutskiy
cc5f4f2875 UBI: return correct error code
Fix the following warning:

drivers/mtd/ubi/eba.c: In function 'ubi_eba_init_scan':
drivers/mtd/ubi/eba.c:1116: warning: 'err' may be used uninitialized in this function

Pointed-to-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:21 +03:00
Artem Bityutskiy
5abde384e3 UBI: remove useless inlines
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:21 +03:00
Artem Bityutskiy
e8823bd63d UBI: fix atomic LEB change problems
When the UBI device is nearly full, i.e. all LEBs are mapped, we have
only one spare LEB left - the one we reserved for WL purposes. Well,
I do not count the LEBs which were reserved for bad PEB handling -
suppose NOR flash for simplicity. If an "atomic LEB change operation"
is run, and the WL unit is moving a LEB, we have no spare LEBs to
finish the operation and fail, which is not good. Moreover, if there
are 2 or more simultanious "atomic LEB change" requests, only one of
them has chances to succeed, the other will fail with -ENOSPC. Not
good either.

This patch does 2 things:
1. Reserves one PEB for the "atomic LEB change" operation.
2. Serealize the operations so that only on of them may run
   at a time (by means of a mutex).

Pointed-to-by: Brijesh Singh <brijesh.s.singh@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:21 +03:00
Artem Bityutskiy
6986646ba7 UBI: use byte hexdump
More handy since word hexdump prints in host endian.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:21 +03:00
Artem Bityutskiy
e88d6e10e5 UBI: do not use vmalloc on I/O path
Similar reason as in case of the previous patch: it causes
deadlocks if a filesystem with writeback support works on top
of UBI. So pre-allocate needed buffers when attaching MTD device.
We also need mutexes to protect the buffers, but they do not
cause much contantion because they are used in recovery, torture,
and WL copy routines, which are called seldom.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:21 +03:00
Artem Bityutskiy
33818bbb84 UBI: allocate memory with GFP_NOFS
Use GFP_NOFS flag when allocating memory on I/O path, because otherwise
we may deadlock the filesystem which works on top of us. We observed
the deadlocks with UBIFS. Example:

VFS->FS lock a lock->UBI->kmalloc()->VFS writeback->FS locks the same
lock again.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:20 +03:00
Artem Bityutskiy
ef6075fbfc UBI: use linux print_hex_dump(), not home-grown one
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:20 +03:00
Jesper Juhl
0169b49d52 UBI: don't use array index before testing if it is negative
I can't find anything guaranteeing that 'ubi_num' cannot be <0 in
drivers/mtd/ubi/kapi.c::ubi_open_volume(), and in fact the code
even tests for that and errors out if so. Unfortunately the test
for "ubi_num < 0" happens after we've already used 'ubi_num' as
an array index - bad thing to do if it is negative.
This patch moves the test earlier in the function and then moves
the indexing using that variable after the check. A bit safer :-)

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:20 +03:00
Artem Bityutskiy
8d2d4011f1 UBI: add more prints
I hit those situations and found out lack of print messages. Add more prints
when erase problems occur.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:20 +03:00
Artem Bityutskiy
8bc2296196 UBI: fix sparse warnings
Fix "symbol shadows an earlier one" warnings. Although they are harmless
but it does not hurt to fix them and make sparse happy.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:20 +03:00
Florin Malita
dcec4c3bdc UBI: fix leak in ubi_scan_erase_peb
Coverity (1769) found the following problem: if the erase counter
overflow check triggers, ec_hdr is leaked.

Moving the allocation after the overflow check should take care of it.

Signed-off-by: Florin Malita <fmalita@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2007-10-14 13:10:20 +03:00
David Woodhouse
ebf8889bd1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 2007-10-13 14:58:23 +01:00
David Woodhouse
b160292cc2 Merge Linux 2.6.23 2007-10-13 14:43:54 +01:00
Bryan Wu
b37bde1478 [MTD] [NAND] Blackfin on-chip NAND Flash Controller driver
This is the driver for latest Blackfin on-chip nand flash controller

 - use nand_chip and mtd_info common nand driver interface
 - provide both PIO and dma operation
 - compiled with ezkit bf548 configuration
 - use hardware 1-bit ECC
 - tested with YAFFS2 and can mount YAFFS2 filesystem as rootfs

ChangeLog from try#1
 - use hweight32() instead of count_bits()
 - replace bf54x with bf5xx and BF54X with BF5XX
 - compare against plat->page_size in 2 cases when enable hardware ECC

ChangeLog from try#2
 - passed nand_test suites
 - use cpu_relax() instead of busy wait loop
 - some coding style issue pointed out by Andrew

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13 14:36:49 +01:00
Kevin Hao
c4a9f88daf [MTD] [NOR] fix ctrl-alt-del can't reboot for intel flash bug
When we press ctrl-alt-del,kernel_restart_prepare will invoke 
cfi_intelext_reboot which will set flash to read array mode, but later 
when device_shutdown is invoked which may put current work queue to 
sleep and other process may be scheduled to running and programming 
flash in not FL_READY mode again. So we can't boot up if this flash is 
used for bootloader.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13 14:36:18 +01:00
akpm@linux-foundation.org
f96880d1e8 [MTD] [NAND] Fix compiler warning in Alauda driver
drivers/mtd/nand/alauda.c: In function 'alauda_bounce_read':
drivers/mtd/nand/alauda.c:412: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2007-10-13 14:33:27 +01:00