Commit Graph

61 Commits

Author SHA1 Message Date
Francois Romieu
315917d23f [PATCH] r8169: Fix iteration variable sign
This changes the type of variable "i" in rtl8169_init_one()
from "unsigned int" to "int". "i" is checked for < 0 later,
which can never happen for "unsigned". This results in broken
error handling.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-29 13:45:07 -08:00
Linus Torvalds
209ad53bc1 Revert "r8169: mac address change support"
This reverts commit a2b98a697f.

As per Guennadi Liakhovetski, the mac address change support code breaks
some normal uses (_without_ any address changes), and until it's all
sorted out, we're better off without it.

Says Francois:

  "Go revert it.

   Despite what I claimed, I can not find a third-party confirmation by
   email that it works elsewhere.

   It would probably be enough to remove the call to
   __rtl8169_set_mac_addr() in rtl8169_hw_start() though."

See also

	http://bugzilla.kernel.org/show_bug.cgi?id=6032

Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-29 17:31:49 -08:00
Jeff Garzik
12cbbd95e1 Merge tag 'jg-20061012-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp 2006-10-21 14:16:11 -04:00
Arnaud Patard
733b736c91 r8169: fix infinite loop during hotplug
Bug reported for PCMCIA.

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-10-12 22:10:44 +02:00
Andrew Morton
73f5e28b33 r8169: PCI ID for Corega Gigabit network card
Fix for http://bugzilla.kernel.org/show_bug.cgi?id=7239.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-10-09 22:37:08 +02:00
David Howells
7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Linus Torvalds
a319a2773a Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (217 commits)
  net/ieee80211: fix more crypto-related build breakage
  [PATCH] Spidernet: add ethtool -S (show statistics)
  [NET] GT96100: Delete bitrotting ethernet driver
  [PATCH] mv643xx_eth: restrict to 32-bit PPC_MULTIPLATFORM
  [PATCH] Cirrus Logic ep93xx ethernet driver
  r8169: the MMIO region of the 8167 stands behin BAR#1
  e1000, ixgb: Remove pointless wrappers
  [PATCH] Remove powerpc specific parts of 3c509 driver
  [PATCH] s2io: Switch to pci_get_device
  [PATCH] gt96100: move to pci_get_device API
  [PATCH] ehea: bugfix for register access functions
  [PATCH] e1000 disable device on PCI error
  drivers/net/phy/fixed: #if 0 some incomplete code
  drivers/net: const-ify ethtool_ops declarations
  [PATCH] ethtool: allow const ethtool_ops
  [PATCH] sky2: big endian
  [PATCH] sky2: fiber support
  [PATCH] sky2: tx pause bug fix
  drivers/net: Trim trailing whitespace
  [PATCH] ehea: IBM eHEA Ethernet Device Driver
  ...

Manually resolved conflicts in drivers/net/ixgb/ixgb_main.c and
drivers/net/sky2.c related to CHECKSUM_HW/CHECKSUM_PARTIAL changes by
commit 84fa7933a3 that just happened to be
next to unrelated changes in this update.
2006-09-24 10:15:13 -07:00
Jeff Garzik
78cc3b78c4 Merge tag 'r8169-20060920-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp 2006-09-22 20:18:02 -04:00
Patrick McHardy
84fa7933a3 [NET]: Replace CHECKSUM_HW by CHECKSUM_PARTIAL/CHECKSUM_COMPLETE
Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose
checksum still needs to be completed) and CHECKSUM_COMPLETE (for
incoming packets, device supplied full checksum).

Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-22 14:53:53 -07:00
Francois Romieu
d81bf55110 r8169: the MMIO region of the 8167 stands behin BAR#1
Reported by Matt Bockol <mbockol@carleton.edu> to make
its LOM (MSI 965 Neo) work.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-09-20 21:08:20 +02:00
Jeff Garzik
7282d491ec drivers/net: const-ify ethtool_ops declarations
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 14:30:00 -04:00
Jeff Garzik
2a69bf428e Merge tag 'r8169-20060912-00' of git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6 into tmp 2006-09-12 22:03:36 -04:00
Francois Romieu
b39fe41f48 r8169: quirk for the 8110sb on arm platform
Inverting the write ordering of the TxDescAddr{High/Low} registers
suffices to trigger a sabbat of PCI errors which make the device
completely dysfunctional. The issue has not been reported on a
different platform.

Switching from MMIO accesses to I/O ones as done in Realtek's
own driver fixes (papers over ?) the bug as well but I am not
thrilled to see everyone pay the I/O price for an obscure bug.

This is the minimal change to handle the issue.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reported-by: Lennert Buytenhek <buytenh@wantstofly.org>
2006-09-11 19:51:47 +02:00
Francois Romieu
d2eed8cff9 r8169: the 0x8136 needs a 8 bytes alignment
Reported by Darren Salt.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 22:01:07 +02:00
Francois Romieu
5f787a1aca r8169: add basic MII ioctl support
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 21:59:42 +02:00
Francois Romieu
64e4bfb40c r8169: use standard #defines from mii.h instead of declaring private ones
Some unused stuff goes away btw.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 21:59:36 +02:00
Francois Romieu
5b0384f4fd r8169: trim trailing whitespaces and convert whitespaces to tabs
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 21:59:29 +02:00
Francois Romieu
b518fa8eac r8169: udelay() removal
No need to chew CPU cycles as there is no heavy timing requirement
and the delays are always requested from a sleepable context.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 21:59:24 +02:00
Francois Romieu
188f4af046 r8169: use NETDEV_TX_{BUSY/OK}
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-08-31 21:59:19 +02:00
Jeff Garzik
299176206b drivers/net: Remove deprecated use of pci_module_init()
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>

Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-19 17:48:59 -04:00
Francois Romieu
bcf0bf90cd r8169: sync with vendor's driver
- add several PCI ID for the PCI-E adapters ;
- new identification strings ;
- the RTL_GIGA_MAC_VER_ defines have been renamed to closely match the
  out-of-tree driver. It makes the comparison less hairy ;
- various magic ;
- the PCI region for the device with PCI ID 0x8136 is guessed.
  Explanation: the in-kernel Linux driver is written to allow MM register
  accesses and avoid the IO tax. The relevant BAR register was found at
  base address 1 for the plain-old PCI 8169. User reported lspci show that
  it is found at base address 2 for the new Gigabit PCI-E 816{8/9}.
  Typically:
  01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.: Unknown device 8168 (rev 01)
          Subsystem: Unknown device 1631:e015
          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
          Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
          Latency: 0, cache line size 20
          Interrupt: pin A routed to IRQ 16
          Region 0: I/O ports at b800 [size=256]
          Region 2: Memory at ff7ff000 (64-bit, non-prefetchable) [size=4K]
          ^^^^^^^^
  So far I have not received any lspci report for the 0x8136 and
  Realtek's driver do not help: be it under BSD or Linux, their r1000 driver
  include a USE_IO_SPACE #define but the bar address is always hardcoded
  to 1 in the MM case. :o/
- the 8168 has been reported to require an extra alignment for its receive
  buffers. The status of the 8167 and 8136 is not known in this regard.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:15 +02:00
Francois Romieu
4ff96fa673 r8169: remove rtl8169_init_board
Rationale:
- its signature is not exactly pretty;
- it has no knowledge of pci_device_id;
- kiss 23 lines good bye.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:14 +02:00
Francois Romieu
623a1593c8 r8169: hardware flow control
The datasheet suggests that the device handles the hardware flow
control almost automagically. User report a different story, so
let's try to twiddle the mii registers.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:13 +02:00
Francois Romieu
9dccf61112 r8169: RX fifo overflow recovery
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:13 +02:00
Francois Romieu
a2b98a697f r8169: mac address change support
Fix for http://bugzilla.kernel.org/show_bug.cgi?id=6032.

Cc: Tim Mattox <tmattox@gmail.com>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-07-26 23:23:12 +02:00
Jeff Garzik
9b91cf9daa [netdrvr] use dev_xxx() printk helpers, rather than dev_printk(KERN_xxx, ...
Suggested by Jiri Slaby.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 13:42:57 -04:00
Jeff Garzik
2e8a538d86 [netdrvr] Use dev_printk() when ethernet interface isn't available
For messages prior to register_netdev(), prefer dev_printk() because
that prints out both our driver name and our [PCI | whatever] bus id.

Updates: 8139{cp,too}, b44, bnx2, cassini, {eepro,epic}100, fealnx,
	 hamachi, ne2k-pci, ns83820, pci-skeleton, r8169.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 13:42:07 -04:00
Thomas Gleixner
1fb9df5d30 [PATCH] irq-flags: drivers/net: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:51 -07:00
Herbert Xu
7967168cef [NET]: Merge TSO/UFO fields in sk_buff
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP).  So
let's merge them.

They were used to tell the protocol of a packet.  This function has been
subsumed by the new gso_type field.  This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb.  As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.

I've made gso_type a conjunction.  The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN.  All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4.  This means that only the CWR packets need
to be emulated in software.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 02:07:29 -07:00
Herbert Xu
5b057c6b1a [NET]: Avoid allocating skb in skb_pad
First of all it is unnecessary to allocate a new skb in skb_pad since
the existing one is not shared.  More importantly, our hard_start_xmit
interface does not allow a new skb to be allocated since that breaks
requeueing.

This patch uses pskb_expand_head to expand the existing skb and linearize
it if needed.  Actually, someone should sift through every instance of
skb_pad on a non-linear skb as they do not fit the reasons why this was
originally created.

Incidentally, this fixes a minor bug when the skb is cloned (tcpdump,
TCP, etc.).  As it is skb_pad will simply write over a cloned skb.  Because
of the position of the write it is unlikely to cause problems but still
it's best if we don't do it.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 02:06:41 -07:00
Yoichi Yuasa
de1e938e54 [PATCH] r8169: add new PCI ID
Hi,

This patch add new PCI ID for r8169 driver.
RTL8110SBL has this PCI ID.

Please aply.

Yoichi

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-26 21:47:15 -04:00
Arjan van de Ven
f71e130966 Massive net driver const-ification. 2006-03-03 21:33:57 -05:00
Francois Romieu
61a4dcc2f9 r8169: enable wake on lan
Similar to 8139cp code but more inspired/lucky.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-02-23 23:06:48 +01:00
Francois Romieu
5d06a99f54 r8169: fix broken ring index handling in suspend/resume
rtl8169_hw_start() requires that the descriptor ring indexes be
set to zero. Let a deferred invocation of rtl8169_reset_task()
handle it. Enabling a few power management bits will not hurt
either.

suspend/resume is issued with irq on: the spinlock do not need
to save the irq flag.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-02-23 23:06:07 +01:00
Andy Gospodarek
726ecdcf68 r8169: fix forced-mode link settings
Allow the r8169 driver to set devices to be full-duplex only when
auto-negotiate is disabled.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-01-31 19:16:52 +01:00
Francois Romieu
2371408c02 r8169: prevent excessive busy-waiting
The MII registers read/write function blindly busy waits for an
amount of 1000 us (1 ms), then up to 200 ms. These functions are
called from irq disabled context. Depending on the clock management,
it triggers lost ticks events. Since the value is way above the
standard delay required for mii register access, it strangely looks
like a bandaid against posted writes.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=5947

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-01-29 00:49:09 +01:00
Jesper Juhl
3c6bee1d40 [PATCH] turn "const static" into "static const"
ICC likes to complain about storage class not being first, GCC doesn't
care much (except for cases like "inline static").
have a hard time seeing how it could break anything.

Thanks to Gabriel A. Devenyi for pointing out
http://linuxicc.sourceforge.net/ which is what made me create this patch.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 08:01:55 -08:00
Francois Romieu
e53091fae5 r8169: do not abort when the power management capabilities are disabled
The capabilities of the 8169 can be disabled but it is hardly a reason
to prevent the use the device. The (so far) unusual behavior has been
reported on a MIPS platform by Yoichi Yuasa.

Spotted-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-16 23:44:41 +01:00
Francois Romieu
7c8b2eb4c7 r8169: fix printk_ratelimit in the interrupt handler
I keep on getting "printk: N messages suppressed" messages.  We need to test
netif_msg_intr() _before_ running printk_ratelimit(), because the latter
updates state.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-16 23:44:05 +01:00
Jeff Garzik
3c8c7b2f32 Merge branch 'upstream-fixes' 2005-10-03 22:06:19 -04:00
Francois Romieu
f0e837d918 [PATCH] r8169: tone down the r8169 driver
Tone down the r8169 driver

As an alternative, people can use the boot time 'debug' option and/or use
'ethtool -s ethX msglvl xyz'.  The different messages are listed at:
http://www.zoreil.com/~romieu/r8169/doc/msglvl.txt

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 17:20:21 -07:00
Jeff Garzik
da192bb50c Merge /spare/repo/linux-2.6/ 2005-09-22 15:43:14 -04:00
Tommy Christensen
0b50f81d5a [PATCH] r8169: call proper VLAN receive function
vlan_hwaccel_rx should be used when in interrupt context.

Fixes bug  http://bugzilla.kernel.org/show_bug.cgi?id=5284

Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-21 22:49:07 -04:00
John W. Linville
6d6525b7f7 [PATCH] r8169: support ETHTOOL_GPERMADDR
Add support for ETHTOOL_GPERMADDR to r8169.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14 08:30:02 -04:00
Francois Romieu
86f0cd5057 [PATCH] r8169: avoid conflict between revisions 2 and 3 of the Linksys EG1032
Both revisions share the same PCI device ID and vendor ID but revision 2
of the device uses SysKonnect's chipset whereas revision 3 of the device
uses Realtek's 8169 chipset.

Credit goes to Christiaan Lutzer <mythtv.lutzer@gmail.com> for reporting
the issue and giving the actual value for the different revisions.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-27 04:41:01 -04:00
Francois Romieu
913168de62 [PATCH] r8169: PCI ID for the Linksys EG1032
The Linksys EG1032 uses Realtek's 8169 chipset.

Credit goes to Bob Wilson <bwilson4web@hotmail.com> for the report.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-19 03:04:10 -04:00
David S. Miller
689be43945 [NET]: Remove gratuitous use of skb->tail in network drivers.
Many drivers use skb->tail unnecessarily.

In these situations, the code roughly looks like:

	dev = dev_alloc_skb(...);

	[optional] skb_reserve(skb, ...);

	... skb->tail ...

But even if the skb_reserve() happens, skb->data equals
skb->tail.  So it doesn't make any sense to use anything
other than skb->data in these cases.

Another case was the s2io.c driver directly mucking with
the skb->data and skb->tail pointers.  It really just wanted
to do an skb_reserve(), so that's what the code was changed
to do instead.

Another reason I'm making this change as it allows some SKB
cleanups I have planned simpler to merge.  In those cleanups,
skb->head, skb->tail, and skb->end pointers are removed, and
replaced with skb->head_room and skb->tail_room integers.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
2005-06-28 15:25:31 -07:00
Linus Torvalds
0e396ee43e Manual merge of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git
This is a fixed-up version of the broken "upstream-2.6.13" branch, where
I re-did the manual merge of drivers/net/r8169.c by hand, and made sure
the history is all good.
2005-06-18 11:42:35 -07:00
Ralf Baechle
979b6c135f [NET]: Move the netdev list to vger.kernel.org.
From: Ralf Baechle <ralf@linux-mips.org>

There are archives of the old list at http://oss.sgi.com/archives/netdev

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-13 14:30:40 -07:00
Richard Dawe
4dcb7d3377 [PATCH] r8169: minor cleanup
- more consistent prototypes;
- rtl8169_rx_interrupt()
  o the error condition should be rare;
  o goto removal.

Signed-off-by: Richard Dawe <rich@phekda.gotadsl.co.uk>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-05-27 21:12:00 +02:00