Commit Graph

69 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
7ccbe504b5 powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP
The old PowerSurge SMP (ie, dual or quad 604 machines) code has
numerous issues in modern world.

One is cpu_possible_map is set too late (the device-tree is bogus)
so we fail to allocate the interrupt stacks and crash. Another
problem is the fact the timebase is frozen by the bringup of the
second CPU so the delays in the generic code will hang, we need
to move some of the calling procedure to inside the powermac code.

This makes it boot again for me

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-06-26 14:37:24 +10:00
Kumar Gala
95272262aa powerpc/pci: Clean up direct access to sysdata by powermac platforms
We shouldn't directly access sysdata to get the device node but call
pci_bus_to_OF_node() for this purpose.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:23 +10:00
Giuliano Pochini
4c4ece3cf8 powerpc/powermac: Hotplug /sys entries are missing
On Wed, 18 Feb 2009 22:18:21 +0100
Giuliano Pochini <pochini@shiny.it> wrote:

Since 2.6.28, /sys/devices/system/cpu/cpu*/online don't exist anymore
on 32-bit PowerMacs due to change in the generic powerpc code.

Signed-off-by: Giuliano Pochini <pochini@shiny.it>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-23 15:53:06 +11:00
Anton Vorontsov
5be8554875 powerpc: Remove default kexec/crash_kernel ops assignments
Default ops are implicit now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-23 15:13:28 +11:00
Michael Ellerman
22059a90b8 powerpc/pmac: Use of_find_node_with_property() in pmac_setup_arch()
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-11-19 16:05:03 +11:00
Adrian Bunk
9d5a9e7465 Remove asm/a.out.h files for all architectures without a.out support.
This patch also includes the required removal of (unused) inclusion of
<asm/a.out.h> <linux/a.out.h>'s in the arch/ code for these
architectures.

[dwmw2: updated for 2.6.27-rc]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-06 19:30:24 +01:00
Benjamin Herrenschmidt
025d7917a5 powerpc/powermac: Fixup default serial port device for pmac_zilog
This removes the non-working code in legacy_serial that tried to handle
the powermac SCC ports, and instead add a (now working) function to the
powermac platform code to find the default serial console if any.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-28 16:30:53 +10:00
Jason Wessel
17ce452f7e kgdb, powerpc: arch specific powerpc kgdb support
This patch removes the old kgdb reminants from ARCH=powerpc and
implements the new style arch specific stub for the common kgdb core
interface.

It is possible to have xmon and kgdb in the same kernel, but you
cannot use both at the same time because there is only one set of
debug hooks.

The arch specific kgdb implementation saves the previous state of the
debug hooks and restores them if you unconfigure the kgdb I/O driver.
Kgdb should have no impact on a kernel that has no kgdb I/O driver
configured.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-07-23 11:30:15 -05:00
Tony Breeds
21e38dfee5 [POWERPC] Fix building of pmac32 when CONFIG_NVRAM=m
Kamalesh Babulal (kamalesh@linux.vnet.ibm.com) reports that CONFIG_NVRAM=m
is valid in terms of Kconfig but fails to build with:
  Building modules, stage 2.
  MODPOST 1401 modules
ERROR: "pmac_newworld" [arch/powerpc/platforms/powermac/nvram.ko] undefined!
ERROR: "__alloc_bootmem" [arch/powerpc/platforms/powermac/nvram.ko] undefined!
make[1]: *** [__modpost] Error

The arch/powerpc/platforms/powermac/nvram.c code really needs to be
builtin, but as its compilation is dependent on a generic Kconfig
symbol we force nvram.c to be builtin if CONFIG_NVRAM is 'y' or 'm'.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29 15:57:34 +10:00
Linus Torvalds
9a64388d83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
  [POWERPC] Fix compile breakage for 64-bit UP configs
  [POWERPC] Define copy_siginfo_from_user32
  [POWERPC] Add compat handler for PTRACE_GETSIGINFO
  [POWERPC] i2c: Fix build breakage introduced by OF helpers
  [POWERPC] Optimize fls64() on 64-bit processors
  [POWERPC] irqtrace support for 64-bit powerpc
  [POWERPC] Stacktrace support for lockdep
  [POWERPC] Move stackframe definitions to common header
  [POWERPC] Fix device-tree locking vs. interrupts
  [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
  [POWERPC] Remove unused __max_memory variable
  [POWERPC] Simplify xics direct/lpar irq_host setup
  [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
  [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
  [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
  [POWERPC] Use asm-generic/bitops/find.h in bitops.h
  [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
  [POWERPC] 85xx: Fix the size of qe muram for MPC8568E
  [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
  [POWERPC] 86xx: mark functions static, other minor cleanups
  ...
2008-04-21 15:50:49 -07:00
Bartlomiej Zolnierkiewicz
5c58666fae ppc/pmac: remove ppc_ide_md hooks
* Add pmac_ide_init_ports() helper and use it instead of
  pmac_ide_init_hwif_ports().

* Remove ppc_ide_md hooks - no need for them
  (IDE pmac host driver takes care of all this setup).

* Then remove no longer needed <linux/ide.h> include
  from arch/powerpc/platforms/powermac/pmac.h.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:29 +02:00
David S. Miller
d9b2b2a277 [LIB]: Make PowerPC LMB code generic so sparc64 can use it too.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-13 16:56:49 -08:00
Grant Likely
d518b71784 [POWERPC] powermac: Use machine_*_initcall() hooks in platform code
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-17 14:57:14 +11:00
Lucas Woods
05ead01554 [POWERPC] arch/powerpc: Remove duplicate includes
Signed-off-by: Lucas Woods <woodzy@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 17:13:50 +11:00
Benjamin Herrenschmidt
444532d44a [POWERPC] Enable self-view of the HT host bridge on PowerMac G5
This enables the PCI code to see the device that represents the
HT host bridge on the PowerMac G5.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:13 +11:00
Jon Loeliger
5f867dc798 [POWERPC] Clean out asm/of_{platform, device}.h
Convert #include of asm/of_{platform, device}.h into
linux/of_{platform,device}.h for a few scattered platforms.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-06 14:44:30 +11:00
Paul Mackerras
6ee0d9f744 [POWERPC] Remove unused old code from powermac setup code
Since bootdevice never gets initialized, it's always NULL, and hence a
whole pile of code in arch/powerpc/platforms/setup.c never gets used.
(This was the code that originally was there so that the automatic
root partition selection mechanism would prefer a rootish-looking
partition on the device that OF loaded the kernel from over a similar
partition on other devices.)

This removes the unused code.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2007-10-09 21:01:54 +10:00
Stephen Rothwell
d7418031cf [POWERPC] Remove some more section mismatch warnings
WARNING: vmlinux.o(.text+0x2ff5c): Section mismatch: reference to .init.text:.pmac_find_ide_boot (between '.note_bootable_part' and '.note_scsi_host')

>From holly_defconfig:
WARNING: vmlinux.o(.text+0x164fe): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x16506): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')

>From linkstation_defconfig:
WARNING: vmlinux.o(.text+0x158fe): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x15906): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')

>From mpc7448_hpc2_defconfig:
WARNING: vmlinux.o(.text+0x1583e): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x15846): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')

>From pmac32_defconfig:
WARNING: vmlinux.o(.text+0x154ca): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'note_scsi_host')
WARNING: vmlinux.o(.text+0x154d2): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'note_scsi_host')
WARNING: vmlinux.o(.text+0x1553c): Section mismatch: reference to .init.text:pmac_find_ide_boot (between 'note_bootable_part' and 'note_scsi_host')

>From ppc64_defconfig:
WARNING: vmlinux.o(.text+0x3acdc): Section mismatch: reference to .init.text:.pmac_find_ide_boot (between '.note_bootable_part' and '.note_scsi_host')

>From prpmc2800_defconfig:
WARNING: vmlinux.o(.text+0x1611e): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')
WARNING: vmlinux.o(.text+0x16126): Section mismatch: reference to .init.data:boot_command_line (between 'note_bootable_part' and 'find_via_pmu')

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-09 21:00:48 +10:00
Tony Breeds
c5f226c7e9 [POWERPC] Fix powermac late initcall to only run on powermac
Current ppc64_defconfig kernel fails to boot on iSeries, dying with:

Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc00000000071b258
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=32 iSeries
<snip>
NIP [c00000000071b258] .iSeries_src_init+0x34/0x64
LR [c000000000701bb4] .kernel_init+0x1fc/0x3bc
Call Trace:
[c000000007d0be30] [0000000000008000] 0x8000 (unreliable)
[c000000007d0bea0] [c000000000701bb4] .kernel_init+0x1fc/0x3bc
[c000000007d0bf90] [c0000000000262d4] .kernel_thread+0x4c/0x68
Instruction dump:
e922cba8 3880ffff 78840420 f8010010 f821ff91 60000000 e8090000 78095fe3
4182002c e922cb58 e862cbb0 e9290140 <e8090000> f8410028 7c0903a6 e9690010
Kernel panic - not syncing: Attempted to kill init!

This happens because some powermac code unconditionally sets
ppc_md.progress to NULL.  This patch makes sure the powermac late
initcall is only run on powermac machines.

Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-20 22:07:38 +10:00
Paul Mackerras
c63c4faa8c [POWERPC] Fix per-cpu allocation on oldworld SMP powermacs
The per-cpu area(a) for the secondary CPU(s) isn't getting allocated
on old SMP powermacs that don't have the secondary CPU(s) listed in
the device tree, as per-cpu areas are now only allocated for CPUs in
the cpu_possible_map, and we aren't setting the bits for the secondary
CPU(s) until smp_prepare_cpus(), which is after per-cpu allocation.
Therefore this sets the bits for CPUs 1..3 in cpu_possible_map in
pmac_setup_arch, so they get per-cpu data allocated.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-14 11:56:17 +10:00
Li Yang
405861a042 [POWERPC] Fix Section mismatch warnings
This patch fix the following Section mismatch warnings in powerpc code.

WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.data:mv643xx_eth_pd_devs from .text between 'mv643xx_eth_add_pds' (at offset 0x9ed2) and 'gg2_read_config'
WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.data:mv643xx_eth_pd_devs from .text between 'mv643xx_eth_add_pds' (at offset 0x9ed6) and 'gg2_read_config'
WARNING: arch/powerpc/platforms/built-in.o - Section mismatch: reference to .init.text:note_scsi_host from __ksymtab between '__ksymtab_note_scsi_host' (at offset 0x8) and '__ksymtab_sys_ctrler'

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-23 07:45:18 -05:00
Stephen Rothwell
55b61fec22 [POWERPC] Rename device_is_compatible to of_device_is_compatible
for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:14 +10:00
Johannes Berg
d9333afd6a [POWERPC] powermac: Support G5 CPU hotplug
This allows "hotplugging" of CPUs on G5 machines.  CPUs that are
disabled are put into an idle loop with the decrementer frequency set
to minimum.  To wake them up again we kick them just like when bringing
them up.  To stop those CPUs from messing with any global state we stop
them from entering the timer interrupt.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:31:13 +10:00
Johannes Berg
be9c94dd77 [POWERPC] Fix suspend states again
In commit 0fba3a1f39 (a very long time ago,
May 2006), I fixed a bug that caused powermacs to crash when you tried
entering standby/mem suspend states.

As I'm now getting more familiar with the suspend code I notice a few
more things:
 1. we previously misunderstood what pm_ops is for, it isn't supposed to be
    for doing platform dependent suspend/resume stuff that needs to be done
    for suspend to disk (as we currently try to use it!), it is instead for
    entering platform dependent suspend states ("standby", "mem").
 2. due to the first point, we never properly save FPU and altivec states
    when suspending to disk. It probably hasn't hurt yet because the process
    that writes the "disk" to /sys/power/state uses neither and its context
    is used.

This patch addresses these points as follows:
 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently
    usable via /sys/power/state but is done via the PMU instead.
 2. move the code responsible for storing FPU/altivec state into
    save_processor_state and the set_context() call to restore_processor_state.
 3. add a call to kernel_enable_spe()

It may look like there is some code removal missing but that is
actually because the new suspend.h file overrides the ppc/suspend.h
one which was previously used.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02 20:04:30 +10:00
Olaf Hering
8d8a0241eb [POWERPC] Generic check_legacy_ioport
check_legacy_ioport makes only sense on PREP, CHRP and pSeries.
They may have an isa node with PS/2, parport, floppy and serial ports.

Remove the check_legacy_ioport call from ppc_md, it's not needed
anymore.  Hardware capabilities come from the device-tree.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-27 21:14:30 +10:00
Stephen Rothwell
30686ba6d5 [POWERPC] Remove old interface find_devices
Replace uses with of_find_node_by_name and for_each_node_by_name.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:09:02 +10:00
Stephen Rothwell
1658ab6678 [POWERPC] Remove old interface find_type_devices
Replaced by of_find_node_by_type.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 22:09:01 +10:00
Stephen Rothwell
e2eb63927b [POWERPC] Rename get_property to of_get_property: arch/powerpc
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:19 +10:00
Olaf Hering
8545cd2011 [POWERPC] Remove unused inclusion of linux/ide.h
Remove unneeded inclusion of linux/ide.h
It does not compile with CONFIG_BLOCK=n.

Remove asm/ide.h from ksyms file, it gets included earlier via
linux/ide.h.

Compile tested with all defconfig files.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13 03:55:14 +10:00
Alon Bar-Lev
b8757b21f7 [PATCH] Dynamic kernel command-line: powerpc
Rename saved_command_line into boot_command_line.

Signed-off-by: Alon Bar-Lev <alon.barlev@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:38 -08:00
Benjamin Herrenschmidt
68a64357d1 [POWERPC] Merge 32 and 64 bits asm-powerpc/io.h
powerpc: Merge 32 and 64 bits asm-powerpc/io.h

The rework on io.h done for the new hookable accessors made it easier,
so I just finished the work and merged 32 and 64 bits io.h for arch/powerpc.

arch/ppc still uses the old version in asm-ppc, there is just too much gunk
in there that I really can't be bothered trying to cleanup.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 20:39:05 +11:00
Benjamin Herrenschmidt
7eebde700f [POWERPC] Souped-up of_platform_device support
This patch first splits of_device.c and of_platform.c, the later containing
the bits relative to of_platform_device's. On the "breaks" side of things,
drivers uisng of_platform_device(s) need to include asm/of_platform.h now
and of_(un)register_driver is now of_(un)register_platform_driver.

In addition to a few utility functions to locate of_platform_device(s),
the main new addition is of_platform_bus_probe() which allows the platform
code to trigger an automatic creation of of_platform_devices for a whole
tree of devices.

The function acts based on the type of the various "parent" devices encountered
from a provided root, using either a default known list of bus types that can be
"probed" or a passed-in list. It will only register devices on busses matching
that list, which mean that typically, it will not register PCI devices, as
expected (since they will be picked up by the PCI layer).

This will be used by Cell platforms using 4xx-type IOs in the Axon bridge
and can be used by any embedded-type device as well.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:08:52 +11:00
Benjamin Herrenschmidt
f90bb153b1 [POWERPC] Make pci_read_irq_line the default
This patch reworks the way IRQs are fixed up on PCI for arch powerpc.

It makes pci_read_irq_line() called by default in the PCI code for
devices that are probed, and add an optional per-device fixup in
ppc_md for platforms that really need to correct what they obtain
from pci_read_irq_line().

It also removes ppc_md.irq_bus_setup which was only used by pSeries
and should not be needed anymore.

I've also removed the pSeries s7a workaround as it can't work with
the current interrupt code anyway. I'm trying to get one of these
machines working so I can test a proper fix for that problem.

I also haven't updated the old-style fixup code from 85xx_cds.c
because it's actually buggy :) It assigns pci_dev->irq hard coded
numbers which is no good with the new IRQ mapping code. It should
at least use irq_create_mapping(NULL, hard_coded_number); and possibly
also set_irq_type() to set them as level low.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04 16:00:04 +11:00
s.hauer@pengutronix.de
fd6e7d2d6a [PATCH] Clean up usage of boot_dev
dev_t boot_dev is declared in arch/powerpc/kernel/setup_32.c
and in arch/powerpc/kernel/setup_64.c but not used in these files.
It is only used in arch/powerpc/platforms/powermac/setup.c, so make
it static in this file.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-13 14:44:59 +11:00
Jeremy Kerr
018a3d1db7 [POWERPC] powermac: Constify & voidify get_property()
Now that get_property() returns a void *, there's no need to cast its
return value. Also, treat the return value as const, so we can
constify get_property later.

powermac platform & macintosh driver changes.

Built for pmac32_defconfig, g5_defconfig

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-31 15:55:05 +10:00
Benjamin Herrenschmidt
0ebfff1491 [POWERPC] Add new interrupt mapping core and change platforms to use it
This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-03 21:36:01 +10:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Michael Ellerman
7d0daae4ae [POWERPC] powerpc: Initialise ppc_md htab pointers earlier
Initialise the ppc_md htab callbacks earlier, in the probe routines. This
allows us to call htab_finish_init() from htab_initialize(), and makes it
private to hash_utils_64.c. Move htab_finish_init() and make_bl() above
htab_initialize() to avoid forward declarations.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 11:59:47 +10:00
Paul Mackerras
6218a761bb powerpc: add context.vdso_base for 32-bit too
This adds a vdso_base element to the mm_context_t for 32-bit compiles
(both for ARCH=powerpc and ARCH=ppc).  This fixes the compile errors
that have been reported in arch/powerpc/kernel/signal_32.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-11 14:15:17 +10:00
Johannes Berg
0fba3a1f39 [PATCH] PowerMac: force only suspend-to-disk to be valid
For a very long time, echoing 'standby' or 'mem' into /sys/power/state has
killed the machine on powerpc.  This patch fixes that.

This patch adds the .valid callback to pm_ops on PowerMac so that only the
suspend to disk state can be entered.  Note that just returning 0 would
suffice since the upper layers don't pass PM_SUSPEND_DISK down, but we
handle it there regardless just in case that changes.

Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-26 11:55:46 -07:00
Benjamin Herrenschmidt
e8222502ee [PATCH] powerpc: Kill _machine and hard-coded platform numbers
This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 23:15:54 +11:00
Paul Mackerras
a0652fc9a2 powerpc: Unify the 32 and 64 bit idle loops
This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle
loops.  It brings over the concept of having a ppc_md.power_save
function from 32-bit to ARCH=powerpc, which lets us get rid of
native_idle().  With this we will also be able to simplify the idle
handling for pSeries and cell.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 15:03:03 +11:00
Paul Mackerras
23dd640112 Merge ../linux-2.6 2006-03-17 12:01:19 +11:00
Benjamin Herrenschmidt
c6cb3b5f36 [PATCH] powerpc: enable NAP only on cpus who support it to avoid memory corruption
This patch fixes incorrect setting of powersave_nap to 1 on all
PowerMacs, potentially causing memory corruption on some models. This
bug was introuced by me during the 32/64 bits merge.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-16 16:55:02 +11:00
Paul Mackerras
d6d93856cb Merge ../powerpc-merge 2006-02-10 16:51:29 +11:00
Al Viro
4fb7d9827e [PATCH] drive_info removal outside of arch/i386
drive_info is used only by hd.c and that happens under #ifdef __i386__.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07 20:56:47 -05:00
Olaf Hering
d2515c806e [PATCH] powerpc: cleanup pmac_newworld variable usage
remove extern declarations of pmac_newworld
move pmac_newworld to bss
if there is any "interrupt-controller" device, then it is newworld.

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-07 22:36:37 +11:00
Arnd Bergmann
ff38e7c80a [PATCH] powerpc: pmac namespace cleanup
pmac_setup_arch is only used in the file that it is defined in,
so it should not be in the global namespace.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-12 20:39:13 +11:00
Benjamin Herrenschmidt
a28d3af2a2 [PATCH] 2/5 powerpc: Rework PowerMac i2c part 2
This is the continuation of the previous patch. This one removes the old
PowerMac i2c drivers (i2c-keywest and i2c-pmac-smu) and replaces them
both with a single stub driver that uses the new PowerMac low i2c layer.

Now that i2c-keywest is gone, the low-i2c code is extended to support
interrupt driver transfers. All i2c busses now appear as platform
devices. Compatibility with existing drivers should be maintained as the
i2c bus names have been kept identical, except for the SMU bus but in
that later case, all users has been fixed.

With that patch added, matching a device node to an i2c_adapter becomes
trivial.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:47:17 +11:00
Benjamin Herrenschmidt
730745a5c4 [PATCH] 1/5 powerpc: Rework PowerMac i2c part 1
This is the first part of a rework of the PowerMac i2c code. It
completely reworks the "low_i2c" layer. It is now more flexible,
supports KeyWest, SMU and PMU i2c busses, and provides functions to
match device nodes to i2c busses and adapters.

This patch also extends & fix some bugs in the SMU driver related to i2c
support and removes the clock spreading hacks from the pmac feature code
rather than adapting them to the new API since they'll be replaced by
the platform function code completely in patch 3/5

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09 15:47:16 +11:00