Commit Graph

276 Commits

Author SHA1 Message Date
Avi Kivity
e495606dd0 KVM: Clean up #includes
Remove unnecessary ones, and rearange the remaining in the standard order.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:49 +03:00
Avi Kivity
d6d2816849 KVM: Remove kvmfs in favor of the anonymous inodes source
kvm uses a pseudo filesystem, kvmfs, to generate inodes, a job that the
new anonymous inodes source does much better.

Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:49 +03:00
Joerg Roedel
6031a61c2e KVM: SVM: Reliably detect if SVM was disabled by BIOS
This patch adds an implementation to the svm is_disabled function to
detect reliably if the BIOS disabled the SVM feature in the CPU. This
fixes the issues with kernel panics when loading the kvm-amd module on
machines where SVM is available but disabled.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:49 +03:00
Avi Kivity
796fd1b23e KVM: VMX: Remove unnecessary code in vmx_tlb_flush()
A vmexit implicitly flushes the tlb; the code is bogus.

Noted by Shaohua Li.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:49 +03:00
Shaohua Li
88a97f0b2f KVM: MMU: Fix Wrong tlb flush order
Need to flush the tlb after updating a pte, not before.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Avi Kivity
75880a0112 KVM: VMX: Reinitialize the real-mode tss when entering real mode
Protected mode code may have corrupted the real-mode tss, so re-initialize
it when switching to real mode.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Luca Tettamanti
a3c870bdce KVM: Avoid useless memory write when possible
When writing to normal memory and the memory area is unchanged the write
can be safely skipped, avoiding the costly kvm_mmu_pte_write.

Signed-Off-By: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Luca Tettamanti
02c03a326a KVM: Fix x86 emulator writeback
When the old value and new one are the same the emulator skips the
write; this is undesirable when the destination is a MMIO area and the
write shall be performed regardless of the previous value. This
optimization breaks e.g. a Linux guest APIC compiled without
X86_GOOD_APIC.

Remove the check and perform the writeback stage in the emulation unless
it's explicitly disabled (currently push and some 2 bytes instructions
may disable the writeback).

Signed-Off-By: Luca Tettamanti <kronos.it@gmail.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Eddie Dong
74906345ff KVM: Add support for in-kernel pio handlers
Useful for the PIC and PIT.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Gregory Haskins
ff1dc7942b KVM: VMX: Fix interrupt checking on lightweight exit
With kernel-injected interrupts, we need to check for interrupts on
lightweight exits too.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:48 +03:00
Gregory Haskins
2eeb2e94eb KVM: Adds support for in-kernel mmio handlers
Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Nitin A Kamble
d9413cd757 KVM: Implement emulation of instruction "ret" (opcode 0xc3)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Nitin A Kamble
7f0aaee07b KVM: Implement emulation of "pop reg" instruction (opcode 0x58-0x5f)
For use in real mode.

Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Avi Kivity
7700270ee3 KVM: VMX: Ensure vcpu time stamp counter is monotonous
If the time stamp counter goes backwards, a guest delay loop can become
infinite.  This can happen if a vcpu is migrated to another cpu, where
the counter has a lower value than the first cpu.

Since we're doing an IPI to the first cpu anyway, we can use that to pick
up the old tsc, and use that to calculate the adjustment we need to make
to the tsc offset.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Avi Kivity
94cea1bb9d KVM: Initialize the BSP bit in the APIC_BASE msr correctly
Needs to be set on vcpu 0 only.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Shani Moideen
a3870c4789 KVM: VMX: Replace memset(<addr>, 0, PAGESIZE) with clear_page(<addr>)
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:47 +03:00
Shani Moideen
129ee910df KVM: SVM: Replace memset(<addr>, 0, PAGESIZE) with clear_page(<addr>)
Signed-off-by: Shani Moideen <shani.moideen@wipro.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
d9e368d612 KVM: Flush remote tlbs when reducing shadow pte permissions
When a vcpu causes a shadow tlb entry to have reduced permissions, it
must also clear the tlb on remote vcpus.  We do that by:

- setting a bit on the vcpu that requests a tlb flush before the next entry
- if the vcpu is currently executing, we send an ipi to make sure it
  exits before we continue

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
39c3b86e5c KVM: Keep an upper bound of initialized vcpus
That way, we don't need to loop for KVM_MAX_VCPUS for a single vcpu
vm.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
72d6e5a08a KVM: Emulate hlt on real mode for Intel
This has two use cases: the bios can't boot from disk, and guest smp
bootstrap.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
d3bef15f84 KVM: Move duplicate halt handling code into kvm_main.c
Will soon have a thid user.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
ef9254df0b KVM: Enable guest smp
As we don't support guest tlb shootdown yet, this is only reliable
for real-mode guests.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:46 +03:00
Avi Kivity
120e9a453b KVM: Fix adding an smp virtual machine to the vm list
If we add the vm once per vcpu, we corrupt the list if the guest has
multiple vcpus.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
7b53aa5650 KVM: Fix vcpu freeing for guest smp
A vcpu can pin up to four mmu shadow pages, which means the freeing
loop will never terminate.  Fix by first unpinning shadow pages on
all vcpus, then freeing shadow pages.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Nguyen Anh Quynh
313899477f KVM: Remove unnecessary initialization and checks in mark_page_dirty()
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Robert P. J. Day
50a3485c59 KVM: Replace C code with call to ARRAY_SIZE() macro.
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
17c3ba9d37 KVM: Lazy guest cr3 switching
Switch guest paging context may require us to allocate memory, which
might fail.  Instead of wiring up error paths everywhere, make context
switching lazy and actually do the switch before the next guest entry,
where we can return an error if allocation fails.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
bd2b2baa5c KVM: MMU: Remove unused large page marker
This has not been used for some time, as the same information is available
in the page header.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:45 +03:00
Avi Kivity
b64b3763a5 KVM: MMU: Don't cache guest access bits in the shadow page table
This was once used to avoid accessing the guest pte when upgrading
the shadow pte from read-only to read-write.  But usually we need
to set the guest pte dirty or accessed bits anyway, so this wasn't
really exploited.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
fd97dc516c KVM: MMU: Simpify accessed/dirty/present/nx bit handling
Always set the accessed and dirty bit (since having them cleared causes
a read-modify-write cycle), always set the present bit, and copy the
nx bit from the guest.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
4436d46621 KVM: MMU: Remove cr0.wp tricks
No longer needed as we do everything in one place.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
e663ee64ae KVM: MMU: Make setting shadow ptes atomic on i386
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
0d551bb698 KVM: Make shadow pte updates atomic
With guest smp, a second vcpu might see partial updates when the first
vcpu services a page fault.  So delay all updates until we have figured
out what the pte should look like.

Note that on i386, this is still not completely atomic as a 64-bit write
will be split into two on a 32-bit machine.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
a18de5a403 KVM: Move shadow pte modifications from set_pte/set_pde to set_pde_common()
We want all shadow pte modifications in one place.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:44 +03:00
Avi Kivity
97a0a01ea9 KVM: MMU: Fold fix_write_pf() into set_pte_common()
This prevents some work from being performed twice, and, more importantly,
reduces the number of places where we modify shadow ptes.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
63b1ad24d2 KVM: MMU: Fold fix_read_pf() into set_pte_common()
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
6598c8b242 KVM: MMU: Pass the guest pde to set_pte_common
We will need the accessed bit (in addition to the dirty bit) and
also write access (for setting the dirty bit) in a future patch.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
e60d75ea29 KVM: MMU: Move set_pte_common() to pte width dependent code
In preparation of some modifications.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
ef0197e8d9 KVM: MMU: Simplify fetch() a little bit
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Avi Kivity
d3d25b048b KVM: MMU: Use slab caches for shadow pages and their headers
Use slab caches instead of a simple custom list.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:43 +03:00
Eddie Dong
8d7282036f KVM: Use symbolic constants instead of magic numbers
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Markus Rechberger
06ff0d3728 KVM: Fix includes
KVM compilation fails for some .configs.  This fixes it.

Signed-off-by: Markus Rechberger <markus.rechberger@amd.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Avi Kivity
687fdbfe64 KVM: x86 emulator: implement wbinvd
Vista seems to trigger it.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Jan Engelhardt
de062065a5 Use menuconfig objects II - KVM/Virt
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
so that the user can disable all the options in that menu at once
instead of having to disable each option separately.

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Eddie Dong
2cc51560ae KVM: VMX: Avoid saving and restoring msr_efer on lightweight vmexit
MSR_EFER.LME/LMA bits are automatically save/restored by VMX
hardware, KVM only needs to save NX/SCE bits at time of heavy
weight VM Exit. But clearing NX bits in host envirnment may
cause system hang if the host page table is using EXB bits,
thus we leave NX bits as it is. If Host NX=1 and guest NX=0, we
can do guest page table EXB bits check before inserting a shadow
pte (though no guest is expecting to see this kind of gp fault).
If host NX=0, we present guest no Execute-Disable feature to guest,
thus no host NX=0, guest NX=1 combination.

This patch reduces raw vmexit time by ~27%.

Me: fix compile warnings on i386.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Eddie Dong
f2be4dd654 KVM: VMX: Cleanup redundant code in MSR set
Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:42 +03:00
Eddie Dong
a75beee6e4 KVM: VMX: Avoid saving and restoring msrs on lightweight vmexit
In a lightweight exit (where we exit and reenter the guest without
scheduling or exiting to userspace in between), we don't need various
msrs on the host, and avoiding shuffling them around reduces raw exit
time by 8%.

i386 compile fix by Daniel Hecken <dh@bahntechnik.de>.

Signed-off-by: Yaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Nitin A Kamble
b3f37707b0 KVM: VMX: Handle #SS faults from real mode
Instructions with address size override prefix opcode 0x67
Cause the #SS fault with 0 error code in VM86 mode.  Forward
them to the emulator.

Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
cd2276a795 KVM: VMX: Use local labels in inline assembly
This makes oprofile dumps and disassebly easier to read.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00
Avi Kivity
cd0536d7cb KVM: Fix vmx I/O bitmap initialization on highmem systems
kunmap() expects a struct page, not a virtual address.  Fixes an oops loading
kvm-intel.ko on i386 with CONFIG_HIGHMEM.

Thanks to Michael Ivanov <deruhu@peterstar.ru> for reporting.

Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-07-16 12:05:41 +03:00