Add FILS roaming support changes as follows:
- Update ERP info in RSO Start
- Update HLP info in a new command WMI_PDEV_UPDATE_FILS_HLP_PKT_CMDID
- Set/Delete PMK cache info with WMI_PDEV_UPDATE_PMK_CACHE_CMDID
- Process FILS TLV in Roam Synch Indication and update the FILS info
[seq number,PMK, KEK, realm] to Supplicant.
Change-Id: I78c3bdde080701deb8d2bdb92d8d57d18cceb864
CRs-Fixed: 2081252
Currently the "requested BSSID" is kept in struct hdd_wext_state. This
information is independent of wireless extensions, so relocate it to
struct hdd_station_ctx and rename it to improve readability and to
conform to the Linux coding style.
Change-Id: I3410103260d5be9cb405084f7f357fcfe08fb6f0
CRs-Fixed: 2128357
Introduce a new parameter in the ini file for the maximum
number of MSDUs per HTT_RX_INORDERIND message.
This parameter is now sent over to the FW through the RFS
configuration message.
Change-Id: Id0057861bc172a36483804170274b202198b6824
CRs-Fixed: 2106760
This reverts commit I3216a4c14ac624cc313d11226909efd4f63841d0
When alloccate free Tx desc list, Tx desc pool size is not initialized yet,
so tx_desc_size is set to 0.
This cause free Tx descriptor allocation failed.
Change-Id: I02ae2e59311e737dd9245228048d62f657d5b0d1
CRs-Fixed: 2085753
This change adds support for configuring voltage corner mode
thorugh INI parameter. User will provide a bitmap which will
be passed on to the FW during initialization. In this bitmap,
each pair of bits till BIT27 correspond to different phymode,
bw combination. Bit values signify voltage corner configuration.
Change-Id: I9e86d43079225b6f08fdd281c8f424b18abcffe9
CRs-Fixed: 2109884
The hdd_hostapd_state bCommit flag is a remnant from a prior version
of the driver. This flag is written, but never read, and hence
obviously has no purpose, so remove it.
Change-Id: If4fd93f474fcd6e01cdc51b1575a3509b538b504
CRs-Fixed: 2126889
Remove P2P debug functions from legacy code and apply the new
functions in UMAC P2P component.
Change-Id: I1ff627a553108c74be144232fd0a0406d88de395
CRs-Fixed: 2105808
When receive STOP_BSS, send WLAN_CLIENT_DISONNNECT event send to IPA.
And upon receiving WLAN_CLIENT_DISONNNECT, check if all clients are
already disconnected to avoid redundant event processing.
Change-Id: Ibb3074cdaf65da9ea8c2032df86f9d66b2fce014
CRs-Fixed: 2096338
Propagation from qcacld-2.0 to qcacld-3.0
ipv4 and ipv6 workqueues are initialized in open adapter for STA
and P2P modes but not for AP mode. The workqueues are cancelled
in stop adapter. The cancel_work_sync may be called on AP adapter
workqueue also, if just in time, the AP adapter mode has changed
to STA mode, for example during hostapd stop etc. This can cause
the cancel_work_sync to continuously loop since INIT_WORK has not
been called, finally raising CPU stuck. There is no harm in calling
INIT_WORK on any workqueue since it only makes sure that in cases
as above there is no undeterministic behaviour.
Fix cancel_work_sync issues by initializing ipv4 and ipv6 workqueues.
CRs-Fixed: 2121723
Change-Id: Ief8dd0c797dd1492fa30ca4e41da9e583548e21d
__iw_softap_set_ini_cfg assumes a given user supplied buffer is null
terminated, which can lead to a buffer overrun. Ensure the buffer is
null terminated by copying it to a new, oversized buffer whose last byte
is zero.
Change-Id: If94e753026f79a368cd6b9cb7c745ade4ae29452
CRs-Fixed: 2118809
Netdev Tx/Rx stat counters doesn't reflect packet counter from IPA
offload data path.
Change to add Tx/Rx packet counts from IPA uC data path through IPA uC
stats query.
Change-Id: If80dee818e97f4f75407885c20ee9abf2257be7c
CRs-Fixed: 956283
The original version of the driver was based upon wireless
extensions. Later when nl80211/cfg80211 support was added, in some
cases data received with nl80211 semantics was converted to wireless
extensions semantics. One such data item is the WPA version.
Now that wireless extensions have been deprecated, it is desirable to
align on cfg80211/nl80211 semantics. Therefore now align on enum
nl80211_wpa_versions for maintaining the WPA version.
Change-Id: I2a0fb6996b42adfe6dec7c14493c2dc10f83230c
CRs-Fixed: 2126880
It doesn't record current scan request and won't cleanup being
process scan request. In some Rome platform, host driver just load one
time, scan request status mismatch to cfg80211 if didn't cleanup scan
request, and then cause crash.
Change-Id: I000db80bdf5175775f2415130ee3a2974aefa4ea
CRs-Fixed: 2111330
As part of configure default filters over suspend code
changes wlan module loading broken.
Fix the loading issue by adding the newly added files
to Kbuild.
CRs-Fixed: 2017259
Change-Id: Ib33efa8f7f5e2ca8d9734181df94f70557e9f9cd
In suspend mode multicast, broadcast packets wakes up host,
this leads to higher power consumption.
Add support to configure the IPv6/IPv4 multicast, IPv4 broadcast, XID,
STP, DTP/LLC/CDP packet filters based on ini bit map param, before the
device goes to suspend mode and clear the same filters in resume.
CRs-Fixed: 2011442
Change-Id: Ib355459132086902ba008f2abd17415a8f569b41
when unloading driver, there is possible that the driver_status
has been DRIVER_MODULES_CLOSED, then NETDEV_GOING_DOWN is received,
which will cause assert in qdf_mutex_acquire as lock has been
destoryed.
Change-Id: Ic7e26dc1eb9a40a2462b041b0f3b84452e448cfd
CRs-Fixed: 2126832
Pending_event memory is dynamically allocated after driver loaded
but freed up only when driver unloading.
Fix to free pending_event memory when driver stop.
Change-Id: Ia748e311fc77fc99e193230910fccd7bc9b4f5a9
CRs-Fixed: 2126695
If SAP has no channel left to move then it will issue stop bss. In this
scenario, SAP is not cleaning up its entry from policy manager table
which causes stale entry left over in table.
Fix this situation by stopping the bss successfully and deleting entry
from policy manager table.
Change-Id: I7c7d305936fe16b0deebb9b7a67f7753cbf243e6
CRs-Fixed: 2112932
SoftAP start fails during station connection is in progress and the flag
update_beacon is not set. Also allow beacon/probe resp update in the middle
of p2p connection.
Change-Id: I13d89b6b8b51f999ff317d1f55dc3fcf48bdd422
CRs-Fixed: 2108186
This reverts Change-Id: I1887aab39d2fa13cc8a900164d2aa6d489464e42
Driver is no more acquiring qdf_conc_list_lock before calling
cds_get_pcl(). SME active queue will serialize connection request and
bss start commands.
Change-Id: I98066b8f1e756ae930ea97be6f8c6e6de244662d
CRs-Fixed: 2108186
For data stall continuous HDD tx timeout count of five
post HOST TX time out data stall event to handle it in
data detection module.
Change-Id: Ic6cf5e62f711cef5919a4a5e85e4232c622c04bb
CRs-Fixed: 2094393
There is a possibility of double start of inactivity timer if iff_up
(hdd_open) happens while probe/remove/reinit is still going on.
To mitigate this issue, on iff_up, start inactivity after acquiring
hdd_init_deinit_lock, which make sure probe/remove/reinit are
completed, and thereby inactivity timer is stopped.
Change-Id: I2417215380e318a8410a2d25eabf82f353a26c4f
CRs-Fixed: 2125494
There can be deadlock on iff_up on anyone of mutex's like
init_deinit_lock, iface_change_lock. To catch what caused the
deadlock start the inactivity timer to root-cause the issue
CRs-Fixed: 2120569
Change-Id: I830cc4127a9c0691ee44a5e2c56c871471d638db
qcacld-2.0 to qcacld-3.0 Propagation.
Wifi OFF/ON is needed to update the gEnableModuleDTIM ini param.
Add private ioctl to configure modulated DTIM at runtime.
CRs-Fixed: 2002662
Change-Id: I28be432da775a9aa026cd702c63dee5666260d33
Fine tune the scan rest time configuration parameters,
gRoamRestTimeMin and gNeighborScanTimerPeriod to 50ms and
100ms respectively for better power efficiency.
Change-Id: Ia6edb87dbb0abf4771613a028d711f4f7a4e0f41
CRs-Fixed: 2120683
To avoid circular dependency, cleanup is done
in common code, So use correct header file to
fix any compilation issue.
Change-Id: Id094107dda4f34ed479ead0b801da27c7aa240ff
CRs-Fixed: 2126011
When force_sap_acs is enabled, hostapd acs will be discarded
and driver acs will happen with override values from ini. Finally
weight for a channel is calculated based on rssi, bsscount. etc.
from auto_channel_select_weight. This ini value is getting extracted
only in __wlan_hdd_cfg80211_do_acs() and so ini value won't be updated
in sap config when hostapd acs doesn't happen or force_sap_acs is enabled.
Update auto_channel_select_weight ini value in sap config in
wlan_hdd_cfg80211_start_bss() which is called irrespective of any
configuration.
Change-Id: I90f549fece117a72c19cf5fdc9f6485b1ab8afdc
CRs-Fixed: 2125597
It can help to trace what is happening during load/unload and
avoid just exiting silently.
Change-Id: I61a451058a7846d3627500db2c9d8d5998e8210e
CRs-fixed: 2123331
Commit fb9d5acfed and 645749571d introduce an API to deinit scan
runtime suspend lock and move runtime suspend context deinit in
order to fix a memory leak issue. However, it breaks SSR because
runtime suspend context init and deinit are not matching during
SSR which results double free happens in the rmmod after SSR.
Move runtime suspend context init to correct place.
Change-Id: I698385ab52e7e18636b143cd71c229afb676baff
CRs-fixed: 2123331
If probe failed because of no memory, we want to try to recovery by
issuing a re-probe for built-in driver. Hence, convert probe return
error from -ENOMEM to -EPROBE_DEFER for built-in driver so that
platform driver can issue re-probe based on the return value.
CRs-Fixed: 2124159
Change-Id: I6cca0ed186554c8065b77af8c178ca9e143abf98
In driver as part of __wlan_hdd_cfg80211_set_ap_channel_width() driver
modify the channelBondingMode24GHz and this modified value is not
changed to default value once hostapd restarts.
Due to this when the 20/40 BSS Coexistence Management frame is
received and hostapd tries to change the width to 20Mhz using
__wlan_hdd_cfg80211_set_ap_channel_width(), as
channelBondingMode24GHz is already set to 0, the request is
ignored and SAP doesn’t switch to 20Mhz.
To fix this use per session cb mode to validate bw switch.
Change-Id: Ia233c478794602aa6909cf637c5fc8c82fc3433a
CRs-Fixed: 2058315
Currently, when wifi is disabled from UI, and if the device goes
to suspend before the interface change timer expires, then until
the next APPS wakeup wifi remains enabled hence power numbers are
high.
As a part of fix, Host acquire wakelock when it start change
interface timer.
Change-Id: I41662596725315a6cfe185ee23ae889b69938e0b
CRs-Fixed: 2091154
Implement nbuf alloc fail replenish timer which starts when
there is an nbuf allocation failure and stops when there is
an nbuf allocation success with in the timer expiry duration.
Change-Id: Ie956ea144dec4323664632d00bb8f0f82ba22439
CRs-Fixed: 2033944
1) Currently all the parameter to decide best candidate are chosen
as by default.
Add INI support for those parameters to change values on basis
of performance.
2) At the time of calculating best candidate score, rssi consider
bucket size, good rssi, bad rssi, good rssi percentage from total
rssi percentage, bad rssi percentage from total percentage.
Configure these all params from ini.
Change-Id: I808a40486473fcbb161c12fbd369b3b846beb8c2
CRs-Fixed: 2121735
Enable the TX orphan for TCP packets by gEnableTxOrphan if TX flow control
is not enabled, such as SCC mode.
Change-Id: I0f3bc41bb22f8db10614d4833558caa664e52517
CRs-Fixed: 2123892
Checkpatch has detected multiple instances of "line over 80
characters." Some of them are trivial, so fix them.
Note that there are some instances that can only be addressed by
refactoring the code, and those will be addressed later.
Change-Id: I5d23b8cc7643d83a349532e3f2d32cd27b5dca95
CRs-Fixed: 2122896
Change "qcacld-3.0: Provide SME API to send unit test command to FW"
introduced two whitespace-related issues flagged by checkpatch:
- WARNING: suspect code indent for conditional statements (16, 20)
- WARNING: Statements should start on a tabstop
Fix those issues, as well as update an error message to align with the
new design.
Change-Id: Ic58c3330f73c838ba100e7621ce23eadc3f0d7b0
CRs-Fixed: 2122894
Checkpatch has detected one instance of "else is not generally useful
after a break or return" in hdd_indicate_tsf_internal(), so fix it.
Change-Id: I6aa92cc7966795e719eb5824a3a9354928e79590
CRs-Fixed: 2122872
Checkpatch has detected multiple instances of "line over 80
characters" so fix them. Also remove an obsolete extern to
eliminate an instance of "externs should be avoided in .c files."
Change-Id: Ic6b2082c2df0ffb20ce10c3c3a51c2fbebe849c7
CRs-Fixed: 2122873
Checkpatch has detected multiple instances of "line over 80
characters" so fix them. Also fix one instance of "else is not
generally useful after a break or return."
Change-Id: Ifb03d4d1399a53fa69f03ce2f77ccfca3929d1cc
CRs-Fixed: 2122822
