In roaming path, while processing roam synch indication info/err
prints at the driver adds up latency to the total roaming
transition time and the KPI for maximum transition time exceeds
the expected 100ms. The printk buffer is protected by a global
raw spinlock for readers and writers. This restricts the contexts that
are allowed to access the buffer. So large latencies exists when
printing to kmsg done with QDF trace levels WARN, INFO, ERROR.
Change the redundant/less significant info, error, warn level
prints in roaming path to debug level.
Change-Id: I8e2a03ddef8f3cd680263939f6e0275b8703e681
CRs-Fixed: 2597624
When WMI_ROAM_STATS_EVENTID is received, the driver copies the
roam scan candidate AP data from the event to destination
buffer. This num_ap count is used directly to fill the diag
buffer. When the number of candidates sent by the firmware
is greater than MAX_ROAM_CANDIDATE_AP(8), corruption of the
destination scan->ap buffer occurs.
Validate the number of APs before filling the diag event.
Change-Id: I5258bc0d4ce0108cbc5195aa464afd498ae9fbf9
CRs-Fixed: 2598513
When roaming is complete, firmware sends WMI_ROAM_STATS_EVENTID
to host driver. This event has details regarding the roam
trigger reason, roam scan and candidate details, roaming result
and 11kv info sent after roaming to AP. Parse this event and
fill the below diag log report to print this in logcat:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO
LOG_WLAN_ROAM_TRIGGER_INFO
LOG_WLAN_ROAM_SCAN_INFO
LOG_WLAN_ROAM_RESULT_INFO
LOG_WLAN_RRM_TX_RX_INFO
Change-Id: Ie09dc8ad5b236d0925327dba73a3f2e73a80109a
CRs-Fixed: 2597057
If TXBF is disabled, do not configure TXBF to FW. Otherwise NDPA
packets are sent by SAP from air sniffer, which is incorrect.
Do not configure TXBF to FW through WMI_VDEV_PARAM_SET_HEMU_MODE
if TXBF is disabled for HE.
Change-Id: Ib1f9366ce18be8dadfdb46663f6606dd08f0e033
CRs-Fixed: 2596373
While sending peer_assoc_cmd to FW,add 6ghz HE band capability
if chan_freq is 6ghz.
Change-Id: Icfe886e8c9089d2c58609866e5bc64250c2b6eea
CRs-Fixed: 2591039
Scenario:
Configure two AP with same SSID and different
passwords, and try to connect to one and then roam to
other.
Observations: The DUT would connect to the second AP
but since the password is different, the EAPOL would
certainly fail, and hence it would result in overall
connection drop and the DUT could not establish a
secure connection with the second AP, and it
disconnected with the previous AP.
Fix is to avoid the AP for some time and try to
connect to other BSSIDs, and still if the EAPOl
fails with the new AP, blacklist it.
Change-Id: Ifb908823cd0eb1873ec7a4b08dffa86e548533fc
CRs-Fixed: 2591467
Firmware advertises service capability bit NAN_VDEV_SUPPORT for
separate NAN vdev creation. This capability can be used to create
separate interface for NAN discovery and process corresponding
commands from userspace.
Change-Id: I45573c94ee2d966afc1e207c9eefc146ff43320f
CRs-Fixed: 2592019
DSRC feature is enabled by SDIO card profile. But when debug SDIO
interface feautre, there are many DSRC module compile issue.
Change-Id: I4429f2a6e68b67140a72ad9634031f459ccda397
CRs-Fixed: 2590115
Currently cdp ops are given pdev/vdev/peer
handle as its arguments which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- txrx_data_tx_cb_set
- txrx_mgmt_tx_cb_set
- txrx_mgmt_send_ext
- txrx_pdev_attach_target
- txrx_pdev_detach
- txrx_vdev_attach
- txrx_vdev_register
- txrx_vdev_detach
- txrx_peer_create
- txrx_peer_delete
- txrx_peer_delete_sync
- txrx_fw_stats_get
- txrx_get_vdev_from_vdev_id
- txrx_pdev_set_ctrl_pdev
- txrx_pdev_attach
- txrx_get_vdev_mac_addr
- txrx_pdev_post_attach
- txrx_pdev_pre_detach
- txrx_get_ctrl_pdev_from_vdev
- txrx_get_mon_vdev_from_pdev
Change-Id: Ib8b0b1edd63e7c3f8813b11ca26b50ec121fe255
CRs-Fixed: 2541459
When the firmware doesn't advertise the
wmi_service_hw_db2dbm_support target capability host should send
rssi values in SNR equivalent so that the hardware can trigger
interrupts. Else low rssi, idle roam, emergency deauth roam
interrupts will not be triggered.
Add changes to convert RSSI values coming from ini to
SNR and send it to firmware. Below ini parameters need
conversion:
bss_load_trigger_2g_rssi_threshold
bss_load_trigger_5g_rssi_threshold
idle_roam_min_rssi
candidate_min_rssi_for_beacon_miss
candidate_min_rssi_for_disconnect
Change-Id: Ied0325031b336d0b6c03ad5dda772170bc54190c
CRs-Fixed: 2590848
Presently, during Subsystem Restart(SSR) the object references
are not released cleanly, invoke stop adapter during the SSR
to have common functionality between the netdevice going down
and SSR.
Change-Id: I2980379022f62ef27dea92868c8033c087544d50
CRs-Fixed: 2587443
Firmware needs maximum amsdu size for through-put optimization.
Send host configured amsdu size to firmware when vdev is created.
Change-Id: Ib292c6d9ddc828d5d0a02cf8f6d9a577c8a5c01a
CRs-Fixed: 2573857
1. Update pAddBssParams->ch_width to 160Mhz ch width value
based on VHT operation IE's ch width, channel segment 0
and channel segment 1 fields.
2. Report link rate information to OS for 160Mhz based on
rate flag TX_RATE_VHT160.
The change will fix the incorrect bandwdith reported by
IW commmand (iw wlan0 link) when STA is connected to AP
in VHT160 mode.
Change-Id: I698b12da825619e8e8f28f0cf4ea1ccf2e7072e6
CRs-Fixed: 2585986
Update tx rate flags to include 160Mhz bandwidth in
wma_set_bss_rate_flags_he.
Add HE 160 mcs to rate mapping for nss 1 and nss 2.
This change will fix incorrect bandwidth report via
IW command: iw wlan0 link.
Change-Id: Idd1adc4f2783b86a2a837999ea87bb38c813f213
CRs-Fixed: 2585078
Currently use of comamnd QCA_NL80211_VENDOR_SUBCMD_OEM_DATA
is to pass data blobs from Application to FW but there is
no mechanism to send the data blobs from FW to Application.
To meet the above requirement update the usage of existing
OEM DATA command to use it as a vendor event as well to
send data blob from host to Application.
Change-Id: I502312f25d2754984b86e1cc4e011800a5d4b58a
CRs-Fixed: 2573464
Currently, after FINAL_BMISS detection, FW does channel map
based partial scan followed by one full scan if no candidate
found in partial scan to ROAM to another available AP without
disconnection. This results in additional delay by HOST in
issuing disconnection after a heartbeat failure.
Add INI support (bmiss_skip_full_scan) to allow FW to decide
whether firmware does channel map based partial scan or partial
scan followed by full scan in case no candidate is found in
partial scan after final BMISS.
Change-Id: I48f9bb43bb7933e9ff173f618586ea5986530dcd
CRs-Fixed: 2578848
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam trigger reason,
values associated with the trigger, roam scan candidate info,
roam status, roam failure reason.
This helps in debugging/understanding the scenario when roam
failure happens.
WMI_ROAM_STATS_EVENTID Format:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_stats_event_fixed_param |-> Contains vdev id and number of
| roams detail.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_trigger data TLV |-> Has details on the roam trigger
| reason. Number of roam triggers
| TLV detail is present in the
| fixed param. Maximum 5 roam
| per event is supported
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_info TLV |-> Has details on the roam scan -
| scan type, rssi threshold,
| reason.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_channel_info |-> Has details on the roam scan
TLV | channels. Number of channels
| per trigger is found on the
| wmi_roam_scan_info TLV.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_ap_info TLV |-> Has details on Roam candidate
| APs found during scan. Number
| of roam candidate APs per
| trigger is found on the
| on the wmi_roam_scan_info tlv.
| Max 8 candidates are allowed
| per roam scan.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_result TLV |-> Info on roam success or failure.
| Fail reason, if roaming failed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_report_info|->After roaming, firmware sends
TLV | neighbor/btm report to roamed AP
| to get list of roam candidates.
| This tlv provides info on this.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_channel_info|-> This has the info on the
| channel list received as part
| of BTM/Neighbor report.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Print the info received as part of this event into kmsg.
Featurize all the function defines for this roam logging under
WLAN_FEATURE_ROAM_OFFLOAD flag.
Change-Id: Iddc70b572f2e3dc47f08fd1c3c3597cb44981a17
CRs-Fixed: 2576222
In wma_rx_invalid_peer_ind driver store the i_addr1(ra) in invalid
peer list, which is the self address.
To fix store i_addr2(ta), which is the actual peer address,
in invalid peer list.
Change-Id: I6ff035f3155e611d867778ea56bfdbe8ed3302c8
CRs-Fixed: 2583502
“New channel width” information is not present in CSA event
received by host. When STA processes CSA beacon & CSA action frame
and moves to new channel, “New channel width” & "new channel center
frequencies" are not applied.
Firmware adds "Channel switch wrapper IE" information in CSA event and
sets "WMI_CSWRAP_IE_EXTENDED_PRESENT" bit in ies_present_flag.
Channel switch wrapper ie elemets are parsed to get Wide Bandwidth
Channel Switch information.
Change-Id: I095c49ae5a78cbfa8947e98cc39ec647aa7f3d27
CRs-Fixed: 2571406
As part of commit id I024e03e4ac46f8118da544889de3ffd7cc67a1b4, host
has increased the no of TID'S(8 * no_of_peers_supported + num_vdevs +
2) to fix a firmware assert. This causes memory allocation issues on
some firmware branches. Due to this fix is reverted
Change-Id: I70c9436ce7dcf886d3228298931b9f9569d1fdb1
Crs-Fixed: 2581524
Cleanup peer id from the callers of cdp APIs from
where the peer ID was passed, and use mac address
instead to identify the STA.
Change-Id: Ie6dcae77e959439a71c11b1a2fa0daddcaa6e719
CRs-Fixed: 2529822
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: Idec5775f6c7ac767baedd173a7bde0d3a358d0fe
CRs-Fixed: 2563381
Move the vdev response timer from the vdev object structure
to the psoc mlme structure.
Change-Id: I1df253331ddbd5538066ee93bc3e45b703057818
CRs-Fixed: 2563383
In the present implementation, it is observed that "SETROAMSCANCONTROL 0"
command is not clearing STATIC channels in the firmware for ROAM scan list.
So to clear STATIC channels configured for ROAM scan and set dynamically
added ROAM scan channels host sends two RSO commands to Firmware.
In the first RSO command STATIC channel list is cleared and second RSO
command will add dynamically added ROAM scan channels to ROAM scan list
in firmware.
Change-Id: Ic359326032c5776540c773a51d7531c0cfcd7bdc
CRs-Fixed: 2571119
Currently control path handles of pdev/vdev/peer
are given as arguments to cdp ops, which are
directly accessed by dp layer. This can cause a
race-condition in access of the handle if it
has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the psoc handle which can be accessed all over
to retrieve objmgr_pdev from psoc.
- rx_mic_error
- txrx_pdev_attach
- txrx_vdev_attach
- txrx_peer_create
Change-Id: Iaec8b913810f9035faa0010117cdff19bdded37f
CRs-Fixed: 2541431
Since there is change in FW and doesn't provide rx chaimask 2G on phy0
and rx chainmask 5G on phy1, so add this change to get rx chainmask
2g/5g based on mac phy capability.
Change-Id: I99d5f21c7a8033adc75f3b21e3b486628da3a40f
CRs-Fixed: 2574148
Host configures number of TIDs supported by in WMI_RESOURCE_CONFIG
command.
Firmware supports 8 TIDs per peer, with the existing formula to
calculate num_tids_supported i.e. 2 * (no_of_peers_supported is 32 +
num_vdevs is 4 + 2) firmware can allocate max 76 TIDs. As 76 TIDs are
not enough to serve 32 peers, as a new peer requests to allocate TID
after 76th TID, firmware crash is observed.
example as, SAP is running in DUT and 7 clients are conneted, connect
DUT STA to AP. Here total number of peers are 10 and required TIDs 80
i.e number of peers(10) * TIDs per peer(8) = 80, which exceeds limit of
76 number of TIDs configured at the initialization.
Hence, Host enlages the number of TIDs supported for Low Latency targets
i.e. USB or SDIO based solutions. Host calculates max number of TIDs
supported as follows,
num_tids_supported = (8 * no_of_peers_supported + num_vdevs + 2)
Change-Id: I024e03e4ac46f8118da544889de3ffd7cc67a1b4
CRs-Fixed: 2573130
The current function doesn't handle "hw_mode" parameter.
And if band is specified the function needs to find the
correct "phy cap" in mac_phy_cap list.
The "supported_bands" can be a bit mask of
(WLAN_2G_CAPABILITY | WLAN_5G_CAPABILITY), use "&" to find
the phy cap of requested band.
Remove unused API wma_get_phyid_for_given_band.
Change-Id: I4b120d681b820e2a6e2b82f33d67fbcf6136af09
CRs-Fixed: 2571400
The ANI level determines how well the device is coping with interference
in the wireless environment. Add support in the driver to query the ANI
level from the firmware and populate it for userspace entities to use.
Change-Id: I54934f670aa11737e11eca4d64e12f9dffb4f430
CRs-Fixed: 2554674
Self-peer holds a reference to the vdev object. As part
of new changes to send vdev delete to firmware as part
of vdev delete notification, the self peer reference needs
to be released 1st before sending the vdev delete to firmware.
Hence detach the peer deletion from the vdev deletion.
Change-Id: I8169fdd6cc6acadea9a89baf38bd273797e8bc9b
CRs-Fixed: 2565315
Use "CDS_BAND_2GHZ" to get 2G vht phy capabilities.
Also use "total_mac_phy_cnt" to enumerate mac_phy_cap
list to get correct 2G phy caps.
Change-Id: Ibced9b07370932b65a35f43aa579b3c28ea6e23b
CRs-Fixed: 2568539
Send vdev create to firmware when the mlme vdev create handler
is invoked as part of the vdev object create.
Change-Id: Ibba02f6b5885d7b3a62529ef51768f520395513e
CRs-Fixed: 2555943
Currently cdp ops are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev_id or vdev_id or peer mac address,
which will be used to get the respective handles,
and hence avoiding the unwanted access of the
handles if it has been deleted.
- ipa_get_resource
- ipa_set_doorbell_paddr
- ipa_set_active
- ipa_register_op_cb
- ipa_get_stat
- ipa_tx_data_frame
- ipa_uc_get_share_stats
- ipa_uc_set_quota
- ipa_enable_autonomy
- ipa_disable_autonomy
- ipa_setup
- ipa_enable_pipes
- ipa_disable_pipes
- ipa_rx_intrabss_fwd
Change-Id: I678d7a7de7132417ff6051b0fd6da5d14426d21e
CRs-Fixed: 2540861
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged misc_ops
- tx_non_std
- get_opmode
- get_tx_ack_stats
- set_ibss_vdev_heart_beat_timer
- hl_tdls_flag_reset
- set_wisa_mode
- txrx_post_data_stall_event
- update_mac_id
- pkt_log_init
- pkt_log_con_service
- get_num_rx_contexts
- set_wmm_param
- flush_rx_frames
- bad_peer_txctl_set_setting
- bad_peer_txctl_update_threshold
- txrx_data_stall_cb_register
- txrx_data_stall_cb_deregister
- vdev_set_driver_del_ack_enable
- get_intra_bss_fwd_pkts_count
- mark_first_wakeup_packet
- register_pktdump_cb
- unregister_pktdump_cb
- pdev_reset_driver_del_ack
- runtime_suspend
- runtime_resume
CRs-Fixed: 2539735
Change-Id: I2baad09fde29d439ae2099e01e4e68ed6b94196d
Remove legacy usage of channels in WMA layer and
use frequencies instead to incorporate 6ghz
frequencies as well.
Change-Id: Iba4a9ea723d5c03a4deeaffc5fbdf628f435eb67
CRs-Fixed: 2563924
The driver does not check the device DBS capability
and the DBS ini compatibility( ch select policy)
If the DBS ini channel_select_logic_conc is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I629fd8661f70b64808a55c4c9bdafa9608787b09
CRs-Fixed: 2551648
The driver does not check the device DBS capability
and the DBS ini compatibility.
If the DBS ini gDualMacFeatureDisable is disabled
and HW mandates DBS capability then overide the ini
to always keep it enable.
Change-Id: I2b31453f9c8a04cef7f943b30d3c28f844c276b5
CRs-Fixed: 2551644
wma_print_wow_stats does not do null validation for pointer vdev
returned from call to function wlan_objmgr_get_vdev_by_id_from_psoc
which can lead to null pointer derefrence.
Add NULL pointer check for vdev in wma_print_wow_stats.
Change-Id: I4fae47b303436bf9f2a4768995cea7640bc6feab
CRs-Fixed: 2564073
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged l_flowctl_ops
- register_tx_flow_control
- set_vdev_tx_desc_limit
- set_vdev_os_queue_status
- deregister_tx_flow_control_cb
- flow_control_cb
- get_tx_resource
- ll_set_tx_pause_q_depth
- vdev_flush
- vdev_pause
- vdev_unpause
CRs-Fixed: 2539748
Change-Id: I8ad4a20914c654b8e8aaf629dda7f673fdb110e4
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged throttle_ops
- throttle_init_period
- throttle_set_level
CRs-Fixed: 2539744
Change-Id: I0e1339ead92d66463d3b58ed9268c7194fd2bd27
Currently the cdp apis are given pdev/vdev/peer
handle as its arguments, which is directly
accessed in those APIs. This can cause a
race-condition in access of the respective
handles if it has been deleted in parallel.
Hence as a part of cdp convergence, pass only
the pdev/vdev id or peer mac address, which will be
used to get the respective handles, and hence
avoiding the unwanted access of the handles if
it has been deleted.
Converged delay_ops
- tx_delay
- tx_delay_hist
- tx_packet_count
- tx_set_compute_interval
CRs-Fixed: 2539742
Change-Id: I201d343f4ced3b861a65ddf78e10e66f786e5e91
Currently the FW expects the flag of
scan chan cmd to be set if the max BW
is filled for all the channels, which
is not set by driver.
Fix is to set the flag's 2 bit to allow
FW to use the max chanel BW.
Change-Id: I6240b8ae2f0c7389c43dd310d894a35411503d6e
CRs-Fixed: 2550431
Presently as part of the vdev creation the self peer for the vdev
is created in the object manager and in the firmware. The self
peer creation in the object manager needs the vdev to be in the
created state. As part of new changes to send the vdev create to
firmware as part of the vdev creation notification there will be
failure in creating in the self peer.
Hence, drive the self peer creation from the SME layer which will
create the vdev.
Change-Id: I0875f4ec5bd96438c0f21056e1d6920d3be2a177
CRs-Fixed: 2555868
1) Change hdd_parse_plm_cmd's code to populate frequency
list instead of channel ID list into struct
plm_req_params.
2) Use frequencies instead of channel IDs in the following
APIs' parameter/code:
sme_set_plm_request
csr_is_supported_channel
3) Stop populating channel freq list in function
wma_plm_start, as the frequency list will be included
in struct plm_req_params automatically.
Change-Id: I6704752317248ac4cfe800629d777f4a127e7be7
CRs-Fixed: 2560088
