Few IOT APs advertise reduced NSS capabilities on ending
up in bad state. These APs can later recover to support
the actual NSS capabilities. In this scenario, when STA
initiates connection to these APs, which are in bad state,
reduced NSS capabilities is advertised. STA cannot later
upgrade NSS capabilities to the minimum of STA max NSS
capability and APs actual NSS capability, once AP recovers.
Fix is to advertise max NSS capability during connection
with these IOT APs based on vendor OUIs and downgrade if
AP still advertises reduced NSS capability in association
response.
Change-Id: I49ea13534b1a44fd9ffadd1e8fb44e9d782147c4
CRs-Fixed: 2453938
Add action_oui ini gActionOUIDisableAggressiveTX to identify peers for
which some of aggressive TX features are to be disabled in firmware,
when DUT is operating in softap mode.
Aggressive TX features disabled are SIFS bursting, assist and support of
more than 32 frames in AMPDU.
Change-Id: I89fb6d40be5110b0331e84ed3239cd997ce0c899
CRs-Fixed: 2364888
Add support for wildcard OUI 0xFFFFFF in action OUI framework.
When the OUI FFFFFF is defined for some action OUI ini and bit 0
of info_presence bit is set to 0 then the check for vendor OUI
in vendor specific IEs and the vendor IE data checks are skipped
and other checks like MAC, Capabilities are done during connection.
Change-Id: I6e996c5d79f4f7bd91e11134b1b8ba69a1ff0253
CRs-Fixed: 2293167
Add support for new 1x1 connect with 1 Tx/Rx Chain action OUI to be
parsed and sent to the FW. From host during connection, the behaviour
is same as existing connect 1x1 action OUI where nss is sent to 1 to
the FW, but the FW takes the decision to use only one Tx/Rx chain
based on the OUIs defined in the new action ID.
Change-Id: Ia464209043dc73bcc71577c43b28fbe13e780c23
CRs-Fixed: 2264326
Add support for action OUI extensions which can be used by station
to control mode of connection, connected AP's in-activity time and
Tx rate etc.,
Change-Id: Ie85e29c4b0ed7ac2815709d7a4e607c4ba46c6ca
CRs-Fixed: 2254502
