Clean up debug log levels as:
1. Revise VIDC_WARN to VIDC_ERR;
2. Revise VIDC_PROF as VIDC_PERF;
3. Mark some one-time logs, e.g most of logs
in initialization and deinitialization as VIDC_HIGH;
4. Keep VIDC_PKT;
5. All other logs change to VIDC_LOW;
Change-Id: I8fc30f97dc3424da8418aab00e8af074ec8d4ef9
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
DCVS feature depends on multiple client configurations.
Low latency, thumbnail mode, etc are few among them.
DCVS is now decided before the session starts streaming
i.e after all configuration are inplace.
CRs-Fixed: 2457035
Change-Id: I4a42ae6bafdc852e81794b69d117f5821af4841f
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Reverting 2735098 "update video dimensions during port reconfiguration".
Change-Id: I2343cf77d23a564c3346d71dae9cd6377ae9d4e2
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
During a decode session, video output port can go through
reconfiguration. As a result, update the reconfig dimension
when client calls for g_fmt on output port.
Change-Id: Ib5f5866acbdfe107ba4693b8b94498d42f74b312
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
CVP usage is not supported for secure session so do not
enable CVP usage for secure session.
Change-Id: Ifed6daaf706895ebbc56b246134d9775787c7b9d
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Fix to independently control f/w logging route.
Change-Id: I81b57995cb9619d2dee9c43547e86cc3f08d3778
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Driver need not support sessions if cumulative
mbpf (macroblocks per frame) is more than platform
specified value. So reject such sessions.
Change-Id: Id12eedfb97783b746c771066d6a556692be84c9f
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
For H264 decoder, resolutions with non-multiple of 16 were
calculating less internal buffer size. Updated calculation
to handle such scenarios.
Change-Id: I3c07b843cc898a584aba4c9f26627898a7427fe8
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
Have a chipset specific check to decide the default value of
num of extradata planes. Make num of planes as 2 if
extradata is enabled.
Change-Id: Ie61cac744b4277c024f36bebe795bea2eeced6ae
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Support dynamically config blur resolution to firmware.
Remove unused code for encoder aspect_ratio extradata.
Change-Id: Id2896ab943de4b676338b42bd4993d4057e960ac
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Write queues virtual address to video firmware to use it
for debug purpose to get more information.
Change-Id: I9bf347c3ea279196e7ae40c936f6b3608c94b09b
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Entry field from clock data structure gets initialized with
codec data during state transition from MSM_VIDC_CORE_INIT_DONE
to MSM_VIDC_OPEN. When flush is called before this transaction,
it calls msm_clock_data_reset where mentioned field is getting
accessed, which results in uninitialized data access. Add state
check to ensure the command is handled in right sequence.
Change-Id: Ic98221cbfe465415d89a0e2891f8af65f584f1dc
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Add platform specific capabilities for lito and use them
in place of firmware capabilities.
Change-Id: I4aca463604444b7ec161f794aac5ddd334c14368
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
read bit 21 of register FEATURE_CONFIG1(0x00786008)
to check if fuse is blown to enable lower SKU spec.
Change-Id: I63c5d764aed13c60c0d213aa0fc29dec9edfef3f
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Make a vote call whenever the clock frequency driver computes
crosses a threshold mark. This vote call handles the situation
when many subsystems are in turbo and where a need arises to
throttle the CDSP current.
CRs-Fixed: 2330072
Change-Id: Id10c02749b00fd5a1b1980923c5034648bd35985
Signed-off-by: shubham gupta <shubgupt@codeaurora.org>
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
Remove support for V4L2_CID_MPEG_VIDC_VIDEO_PICTYPE_DEC_MODE.
Cleared related code.
Change-Id: I3b7100dfd08ee68a5033d8f6ec2cfdcfbbfbbe14
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
By calculating bitrate at each frame, we get a better estimate
of the BW requirements of the decode session. Thus improving
performance and power usage.
CRs-Fixed: 2451137
Change-Id: I22f0029bbb7d501340469a317e89de7eb34717c4
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Use S32_MAX instead of U32_MAX for maximum ctrl val for
blur resolution, as ctrl val is s32.
Change-Id: Ie92f6ba831ffead2d56c9eee24917b8a42cdd564
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Move cbr plus variable to legacy cbr variable as
it is interfering with CVP usage.
Change-Id: If31f49858486e4295e7dfd9f47175e23c4078200
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Regulator handoff causes the GDSC to turn off momentarily and resets
internal registers. As a result, TZ is unable to program secure
registers during Secure PIL load fails. Moving the handoff after
PIL load allows proper secure register programming and enables
secure sessions.
CRs-Fixed: 2450296
Change-Id: I32c7bf8726b51fdfa73b40819e8fdccdbbc0abe3
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
The structure vidc_hal_session_init_done is not being used,
so remove it.
Change-Id: Id4a577db117f98b18439245907765be5c9badc83
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Default UBWC configuration for LPDDR5 is corrected.
Highest Bank Bit is set to 16.
Change-Id: I0fb18279ae32d34a7f3bada6d05a72c5935430dd
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
video driver does not support TME format, so remove it.
Change-Id: Ica7656fc1758a007f0d20d0351a4cedb82b9a0ee
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Kona target supports two LTR frames encoding.
Fixing this capability in kona driver.
Handle resolution check correctly while setting
slice mode.
Change-Id: Iea6a041ecafb24da014832ecf2146088d4569a6f
CRs-Fixed: 2444064
Signed-off-by: Darshana Patil <darshana@codeaurora.org>
Video kernel snapshot before disabling msm/vidc compilation
from base kernel.
Change-Id: Id1178c3aca00706ad4822537f7f9a28141478771
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
This change brings msm vidc driver from base 4.19 kernel project.
It is the first source code snapshot from base kernel project.
Change-Id: I1d600c4e9459b9013f4b607890c52644f6d94f0c
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
