Commit Graph

26 Commits

Author SHA1 Message Date
Jesper Juhl
e7a1ca1d27 [SCSI] handle scsi_add_host failure for aic79xx and fix compiler warning
Add scsi_add_host() failure handling for aic79xx
Also silence a compiler warning :
 drivers/scsi/aic7xxx/aic79xx_osm.c: In function `ahd_linux_register_host':
 drivers/scsi/aic7xxx/aic79xx_osm.c:1099: warning: ignoring return value of `scsi_add_host', declared with attribute warn_unused_result

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-14 18:52:24 -08:00
Vasily Averin
dce200670d [SCSI] aic7xxx: reset handler selects a wrong command
To transport scsi reset command to device aic7xxx reset handler looks
at the driver's pending_list and searches any proper command. However
the search condition has been inverted: ahc_match_scb() returns TRUE
if a matched command is found. As a result the reset on required
devices did not turn out well, a correctly working neighbour device
may be surprised by the reset. aic7xxx reset handler reports about the
success, but really the original situation is not corrected yet.

Signed-off-by: Vasily Averin <vvs@sw.ru>

Naturally, there's a corresponding problem in the aic79xx driver, so
I've also added the same fix for that.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-28 12:28:26 -06:00
Christoph Hellwig
4065a413d7 [SCSI] aic79xx: remove scsi_assign_lock usage
just take the internal lock in queuecommand instead.  also switch
the only direct use of the internal lock to the wrappers used elsewhere.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06 12:52:08 -06:00
Jeff Garzik
422c0d61d5 [SCSI] use scmd_id(), scmd_channel() throughout code
Wrap a highly common idiom.  Makes the code easier to read, helps pave
the way for sdev->{id,channel} removal, and adds a token that can easily
by grepped-for in the future.

There are a couple sdev_id() and scmd_printk() updates thrown in as well.

Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:10:16 -05:00
Jeff Garzik
017560fca4 [SCSI] use sfoo_printk() in drivers
Rejections fixed up and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28 21:04:15 -05:00
James Bottomley
97af50f60f [SCSI] aic7xxx/aic79xx: fix module removal path not to panic
In these drivers, scsi_remove_host() is called too late, at the point
it is called, the driver has already shut down too far to accept any
I/O that the shutdown might generate.  Any generated I/O actually
triggers a panic.

Fix this by calling scsi_remove_host() as early as possible and not
calling scsi_host_put() until just before we kfree the ahc_softc.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-02 15:32:25 -05:00
Christoph Hellwig
1ff927306e [SCSI] aic7xxx: remove aiclib.c
#include of C files and macro tricks to rename symbols are evil and just
cause trouble.  Let's doublicate the two functions as they're going to
go away soon enough anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-04 19:46:07 -05:00
Christoph Hellwig
85a46523ff [SCSI] aic79xx: sane pci probing
remove ahd_tailq and do sane pci probing.  ported over from aic7xxx.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-15 09:18:55 -05:00
James Bottomley
a80b3424d9 [SCSI] aic79xx: fix boot panic with no hardware
There's a spurious (and illegal since it's marked __exit) call to
ahc_linux_exit() in ahc_linux_init() which causes a double list
deletion of the transport class; remove it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-09 12:19:25 -05:00
James Bottomley
fc789a9399 [SCSI] aic7xxx/79xx: fix another potential panic due to a non existent target
I ran into this one sending bus resets across the hardware.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05 16:49:15 -05:00
Hannes Reinecke
52b5cfb355 [SCSI] aic79xx: fixup DT setting
this patch is just a cross-port of the fixup for aic7xxx DT settings.
As the same restrictions apply for aic79xx also (DT requires wide
transfers) the dt setting routine should be modified equivalently.
And an invalid period setting will be caught by ahd_find_syncrate()
anyway.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04 17:39:55 -05:00
James Bottomley
88ff29a4a5 [SCSI] aic79xx: add hold_mcs to the transport parameters
since this card can support the setting, add it to the parameter list.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 16:22:20 -05:00
James Bottomley
3f40d7d6ea [SCSI] aic79xx: fix up transport settings
There's a slight problem in the way you've done the transport
parameters; reading from the variables actually produces the current
settings, not the ones you just set (and there's usually a lag because
devices don't renegotiate until the next command goes over the bus).  If
you set the bit immediately, you get into the situation where the
transport parameters report something as being set even if the drive
cannot support it.

I patched the driver to do it this way and also corrected a panic in the
proc routines.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 13:36:52 -05:00
Hannes Reinecke
a4b53a1180 [SCSI] aic79xx: DV parameter settings
This patch updates various scsi_transport_spi parameters with the actual
parameters used by the driver internally.
Domain Validation for all devices should now work properly.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 11:48:03 -05:00
Hannes Reinecke
73a2546210 [SCSI] aic79xx: update to use scsi_transport_spi
This patch updates the aic79xx driver to take advantage of the
scsi_transport_spi infrastructure. Patch is quite a mess as some
procedures have been reshuffled to be closer to the aic7xxx driver.

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 11:45:14 -05:00
Hannes Reinecke
60a1321384 [SCSI] aic79xx: Remove busyq
From: Jeff Garzik <jgarzik@pobox.com>

This patch removes the busyq in aic79xx and uses the command-queue from 
the midlayer instead. Additionally some dead code is removed.

Signed-off-by: Hannes Reinecke <hare@suse.de>

Fixed rejections

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03 11:25:36 -05:00
Olaf Hering
44456d37b5 [PATCH] turn many #if $undefined_string into #ifdef $undefined_string
turn many #if $undefined_string into #ifdef $undefined_string to fix some
warnings after -Wno-def was added to global CFLAGS

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27 16:26:08 -07:00
Andrew Morton
cc33895abb [SCSI] aic79xx: ahd_linux_dev_reset() cleanup
Use the macros consistently in ahd_linux_dev_reset().

If ahd_linux_dev_reset() really can be called with local interrupts disabled
then yuk.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11 09:35:39 -05:00
Jeff Garzik
e632ba11b8 aic7xxx/aic79xx_osm: revert completely bogus ahd_linux_queue() patch 2005-06-19 21:50:12 -04:00
James Bottomley
3237ee78fc merge by hand (fix up qla_os.c merge error) 2005-06-17 18:42:23 -05:00
Jeff Garzik
68b3aa7c98 [SCSI] allow sleeping in ->eh_bus_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:10 -05:00
Jeff Garzik
94d0e7b805 [SCSI] allow sleeping in ->eh_device_reset_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:05:03 -05:00
Jeff Garzik
8fa728a268 [SCSI] allow sleeping in ->eh_abort_handler()
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17 12:04:55 -05:00
Shaohua Li
8bd7f125e2 [PATCH] swsusp: ahd_dv_0 can't be stopped
This driver wants to set PF_NOFREEZE.

Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-28 11:14:01 -07:00
be7db055dd [PATCH] remove old scsi data direction macros
these have been wrappers for the generic dma direction bits since 2.5.x.
This patch converts the few remaining drivers and removes the macros.

Arjan noticed there's some hunk in here that shouldn't.  Updated patch
below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18 13:49:58 -05:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00