In error handling 'free_cluster', before num_alloc clusters allocated,
p_chain->size will not updated and always 0, thus the newly allocated
clusters are not freed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When allocating a new cluster, exFAT first allocates from the
next cluster of the last cluster of the file. If the last cluster
of the file is the last cluster of the volume, allocate from the
first cluster. This is a normal case, but the following error log
will be printed. It makes users confused, so this commit removes
the error log.
[1960905.181545] exFAT-fs (sdb1): hint_cluster is invalid (262130)
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
In the removed code, num_clusters is 0, nothing is done in
exfat_chain_cont_cluster(), so it is unneeded, remove it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Using int type for sector index, there will be overflow in a large
capacity partition.
For example, if storage with sector size of 512 bytes and partition
capacity is larger than 2TB, there will be overflow.
Fixes: 1b6138385499 ("exfat: reduce block requests when zeroing a cluster")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
exfat_err() adds the new line at the end of the message by itself,
hence the passed string shouldn't contain a new line. Drop the
superfluous newline letters in the error messages in a few places that
have been put mistakenly.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
sync_blockdev_range will be added to linux 5.19 kernel. So, do directly
call filemap_write_and_wait_range() instead of sync_blockdev_range() on
lower kernel version than 5.19 kernel.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Syzbot reported slab-out-of-bounds read in exfat_clear_bitmap.
This was triggered by reproducer calling truncute with size 0,
which causes the following trace:
BUG: KASAN: slab-out-of-bounds in exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174
Read of size 8 at addr ffff888115aa9508 by task syz-executor251/365
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack_lvl+0x1e2/0x24b lib/dump_stack.c:118
print_address_description+0x81/0x3c0 mm/kasan/report.c:233
__kasan_report mm/kasan/report.c:419 [inline]
kasan_report+0x1a4/0x1f0 mm/kasan/report.c:436
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:309
exfat_clear_bitmap+0x147/0x490 fs/exfat/balloc.c:174
exfat_free_cluster+0x25a/0x4a0 fs/exfat/fatent.c:181
__exfat_truncate+0x99e/0xe00 fs/exfat/file.c:217
exfat_truncate+0x11b/0x4f0 fs/exfat/file.c:243
exfat_setattr+0xa03/0xd40 fs/exfat/file.c:339
notify_change+0xb76/0xe10 fs/attr.c:336
do_truncate+0x1ea/0x2d0 fs/open.c:65
Move the is_valid_cluster() helper from fatent.c to a common
header to make it reusable in other *.c files. And add is_valid_cluster()
to validate if cluster number is within valid range in exfat_clear_bitmap()
and exfat_set_bitmap().
Link: https://syzkaller.appspot.com/bug?id=50381fc73821ecae743b8cf24b4c9a04776f767c
Reported-by: syzbot+a4087e40b9c13aad7892@syzkaller.appspotmail.com
Fixes: 1e49a94cf707 ("exfat: add bitmap operations")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
If 'dirsync' is enabled, when zeroing a cluster, submitting
sector by sector will generate many block requests, will
cause the block device to not fully perform its performance.
This commit makes the sectors in a cluster to be submitted in
once, it will reduce the number of block requests. This will
make the block device to give full play to its performance.
Test create 1000 directories on SD card with:
$ time (for ((i=0;i<1000;i++)); do mkdir dir${i}; done)
Performance has been improved by more than 73% on imx6q-sabrelite.
Cluster size Before After Improvement
64 KBytes 3m34.036s 0m56.052s 73.8%
128 KBytes 6m2.644s 1m13.354s 79.8%
256 KBytes 11m22.202s 1m39.451s 85.4%
imx6q-sabrelite:
- CPU: 792 MHz x4
- Memory: 1GB DDR3
- SD Card: SanDisk 8GB Class 4
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Degradation of write speed caused by frequent disk access for cluster
bitmap update on every cluster allocation could be improved by
selective syncing bitmap buffer. Change to flush bitmap buffer only
for the directory related operations.
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
s_lock which is for protecting concurrent access of file operations is
too huge for cluster bitmap protection, so introduce a new bitmap_lock
to narrow the lock range if only need to access cluster bitmap.
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Replace part of exfat_zeroed_cluster() with exfat_update_bhs().
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This flag is set/reset in exfat_put_super()/exfat_sync_fs()
to avoid sync_blockdev().
- exfat_put_super():
Before calling this, the VFS has already called sync_filesystem(),
so sync is never performed here.
- exfat_sync_fs():
After calling this, the VFS calls sync_blockdev(), so, it is meaningless
to check EXFAT_SB_DIRTY or to bypass sync_blockdev() here.
Remove the EXFAT_SB_DIRTY check to ensure synchronization.
And remove the code related to the flag.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
There is check error in range condition that can never be entered
even with invalid input.
Replace incorrent checking code with already existing valid checker.
Signed-off-by: hyeongseok.kim <hyeongseok@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Remove the direct use of KERN_<LEVEL> in functions by creating
separate exfat_<level> macros.
Miscellanea:
o Remove several unnecessary terminating newlines in formats
o Realign arguments and fit to 80 columns where appropriate
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
