Replace use of rpc_call_setup() with rpc_init_task(), and in cases where we
need to initialise task->tk_action, with rpc_call_start().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want the default scheduling priority (priority == 0) to remain
RPC_PRIORITY_NORMAL.
Also ensure that the priority wait queue scheduling is per process id
instead of sometimes being per thread, and sometimes being per inode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sunrpc client exports are not meant to be part of any official kernel
API: they can change at the drop of a hat. Mark them as internal functions
using EXPORT_SYMBOL_GPL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add kerneldoc comments for the rpc_pipefs.c functions that are exported.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we've disconnected from the server, rather than the other way round,
then it makes little sense to wait 3 seconds before reconnecting.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
xprt_disconnect() should really only be called when the transport shutdown
is completed, and it is time to wake up any pending tasks. Rename it to
xprt_disconnect_done() in order to reflect the semantical change.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the calls to xprt_disconnect() over to xprt_force_disconnect() in
order to enable the transport layer to manage the state of the
XPRT_CONNECTED flag.
Ditto in xs_tcp_read_fraghdr().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The transport layer should do that itself whenever appropriate.
Note that the RDMA transport already assumes that it needs to call
xprt_disconnect in xprt_rdma_close().
For TCP sockets, we want to call xprt_disconnect() only after the
connection has been closed by both ends.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
By using shutdown() rather than close() we allow the RPC client to wait
for the TCP close handshake to complete before we start trying to reconnect
using the same port.
We use shutdown(SHUT_WR) only instead of shutting down both directions,
however we wait until the server has closed the connection on its side.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add an xprt->state bit to enable the TCP ->state_change() method to signal
whether or not the TCP connection is in the process of closing down.
This will to be used by the reconnection logic in a separate patch.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently the TCP rebinding logic assumes that if we're not using a
reserved port, then we don't need to reconnect on the same port if a
disconnection event occurs. This breaks most RPC duplicate reply cache
implementations.
Also take into account the fact that xprt_min_resvport and
xprt_max_resvport may change while we're reconnecting, since the user may
change them at any time via the sysctls. Ensure that we check the port
boundaries every time we loop in xs_bind4/xs_bind6. Also ensure that if the
boundaries change, we only scan the ports a maximum of 2 times.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When scheduling the autoclose RPC call, we want to ensure that we don't
race against the test_bit() call in xprt_clear_locked().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add __acquires() and __releases() annotations to suppress some sparse
warnings.
example of warnings :
net/ipv4/udp.c:1555:14: warning: context imbalance in 'udp_seq_start' - wrong
count at exit
net/ipv4/udp.c:1571:13: warning: context imbalance in 'udp_seq_stop' -
unexpected unlock
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous move of the the UDP inDatagrams counter caused the
counting of encapsulated packets, SUNRPC data (as opposed to call)
packets and RXRPC packets to go missing.
This patch restores all of these.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many-many code in the kernel initialized the timer->function
and timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.
The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rpcrdma_convert_iovs is passed an xdr_buf representing either an RPC
request or an RPC reply. In the case of a request, several
calculations and tests involving pos are unnecessary. In the case of a
reply, several calculations and tests involving pos are incorrect (the
code tests pos against the reply xdr buf's len field, which is always
0 at the time rpcrdma_convert_iovs is executed). This change removes
the incorrect/unnecessary calculations and tests involving pos.
This fixes an observed problem when reading certain file sizes over
NFS/RDMA.
Signed-off-by: Tom Tucker <tom@opengridcomputing.com>
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr'
mount option. We have to use _killable everywhere instead of _interruptible
as we get rid of rpc_clnt_sigmask/sigunmask.
Signed-off-by: Liam R. Howlett <howlett@gmail.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/net-2.6: (41 commits)
[XFRM]: Fix leak of expired xfrm_states
[ATM]: [he] initialize lock and tasklet earlier
[IPV4]: Remove bogus ifdef mess in arp_process
[SKBUFF]: Free old skb properly in skb_morph
[IPV4]: Fix memory leak in inet_hashtables.h when NUMA is on
[IPSEC]: Temporarily remove locks around copying of non-atomic fields
[TCP] MTUprobe: Cleanup send queue check (no need to loop)
[TCP]: MTUprobe: receiver window & data available checks fixed
[MAINTAINERS]: tlan list is subscribers-only
[SUNRPC]: Remove SPIN_LOCK_UNLOCKED
[SUNRPC]: Make xprtsock.c:xs_setup_{udp,tcp}() static
[PFKEY]: Sending an SADB_GET responds with an SADB_GET
[IRDA]: Compilation for CONFIG_INET=n case
[IPVS]: Fix compiler warning about unused register_ip_vs_protocol
[ARP]: Fix arp reply when sender ip 0
[IPV6] TCPMD5: Fix deleting key operation.
[IPV6] TCPMD5: Check return value of tcp_alloc_md5sig_pool().
[IPV4] TCPMD5: Use memmove() instead of memcpy() because we have overlaps.
[IPV4] TCPMD5: Omit redundant NULL check for kfree() argument.
ieee80211: Stop net_ratelimit/IEEE80211_DEBUG_DROP log pollution
...
Support for binary sysctls is being deprecated in 2.6.24. Since there
are no applications using the NFS/RDMA client's binary sysctls, it
makes sense to remove them. The patch below does this while leaving
the /proc/sys interface unchanged.
Please consider this for 2.6.24.
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
xs_setup_{udp,tcp}() can now become static.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pipe messages start out life on a queue on the inode, but when first
read they're moved to the filp's private pointer. So it's possible for
a poll here to return null even though there's a partially read message
available.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Return an error from gss_import_sec_context_kerberos if the
negotiated context contains encryption or checksum types not
supported by the kernel code.
This fixes an Oops because success was assumed and later code found
no internal_ctx_id.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of mapping all errors except EACCES to EAGAIN, map all errors
except EAGAIN to EACCES.
An example is user-land negotiating a Kerberos context with an encryption
type that is not supported by the kernel code. (This can happen due to
mis-configuration or a bug in the Kerberos code that does not honor our
request to limit the encryption types negotiated.) This failure is not
transient, and returning EAGAIN causes mount to continuously retry rather
than giving up.
Signed-off-by: Kevin Coffman <kwc@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix an obvious use-after-free spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sg_mark_end() overwrites the page_link information, but all users want
__sg_mark_end() behaviour where we just set the end bit. That is the most
natural way to use the sg list, since you'll fill it in and then mark the
end point.
So change sg_mark_end() to only set the termination bit. Add a sg_magic
debug check as well, and clear a chain pointer if it is set.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Not architecture specific code should not #include <asm/scatterlist.h>.
This patch therefore either replaces them with
#include <linux/scatterlist.h> or simply removes them if they were
unused.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
This fixes scatterlist corruptions added by
commit 68e3f5dd4d
[CRYPTO] users: Fix up scatterlist conversion errors
The issue is that the code calls sg_mark_end() which clobbers the
sg_page() pointer of the final scatterlist entry.
The first part fo the fix makes skb_to_sgvec() do __sg_mark_end().
After considering all skb_to_sgvec() call sites the most correct
solution is to call __sg_mark_end() in skb_to_sgvec() since that is
what all of the callers would end up doing anyways.
I suspect this might have fixed some problems in virtio_net which is
the sole non-crypto user of skb_to_sgvec().
Other similar sg_mark_end() cases were converted over to
__sg_mark_end() as well.
Arguably sg_mark_end() is a poorly named function because it doesn't
just "mark", it clears out the page pointer as a side effect, which is
what led to these bugs in the first place.
The one remaining plain sg_mark_end() call is in scsi_alloc_sgtable()
and arguably it could be converted to __sg_mark_end() if only so that
we can delete this confusing interface from linux/scatterlist.h
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit baa3a2a0d2, by removing initialization
of the ctl_name field, broke this conditional, preventing the display of
rpc_tasks that you previously got when turning on rpc debugging.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
as some architectures have unsigned long for u64.
net/sunrpc/xprtrdma/rpc_rdma.c: In function 'rpcrdma_create_chunks':
net/sunrpc/xprtrdma/rpc_rdma.c:222: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64'
net/sunrpc/xprtrdma/rpc_rdma.c:234: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'u64'
net/sunrpc/xprtrdma/rpc_rdma.c: In function 'rpcrdma_count_chunks':
net/sunrpc/xprtrdma/rpc_rdma.c:577: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'u64
Noticed on PowerPC pseries_defconfig build.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
rpcrdma stuff lacks endianness annotations for on-the-wire data.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes the errors made in the users of the crypto layer during
the sg_init_table conversion. It also adds a few conversions that were
missing altogether.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most drivers need to set length and offset as well, so may as well fold
those three lines into one.
Add sg_assign_page() for those two locations that only needed to set
the page, where the offset/length is set outside of the function context.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
The task_struct->pid member is going to be deprecated, so start
using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in
the kernel.
The first thing to start with is the pid, printed to dmesg - in
this case we may safely use task_pid_nr(). Besides, printks produce
more (much more) than a half of all the explicit pid usage.
[akpm@linux-foundation.org: git-drm went and changed lots of stuff]
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is debug code so no need to support binary sysctl, and the binary sysctls
as they were written were not consistent with what showed up in /proc so
remove the binary sysctl support.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sparc64:
net/sunrpc/xprtrdma/verbs.c:1264: warning: long long unsigned int format, u64 arg (arg 3)
net/sunrpc/xprtrdma/verbs.c:1264: warning: long long unsigned int format, u64 arg (arg 4)
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (131 commits)
NFSv4: Fix a typo in nfs_inode_reclaim_delegation
NFS: Add a boot parameter to disable 64 bit inode numbers
NFS: nfs_refresh_inode should clear cache_validity flags on success
NFS: Fix a connectathon regression in NFSv3 and NFSv4
NFS: Use nfs_refresh_inode() in ops that aren't expected to change the inode
SUNRPC: Don't call xprt_release in call refresh
SUNRPC: Don't call xprt_release() if call_allocate fails
SUNRPC: Fix buggy UDP transmission
[23/37] Clean up duplicate includes in
[2.6 patch] net/sunrpc/rpcb_clnt.c: make struct rpcb_program static
SUNRPC: Use correct type in buffer length calculations
SUNRPC: Fix default hostname created in rpc_create()
nfs: add server port to rpc_pipe info file
NFS: Get rid of some obsolete macros
NFS: Simplify filehandle revalidation
NFS: Ensure that nfs_link() returns a hashed dentry
NFS: Be strict about dentry revalidation when doing exclusive create
NFS: Don't zap the readdir caches upon error
NFS: Remove the redundant nfs_reval_fsid()
NFSv3: Always use directory post-op attributes in nfs3_proc_lookup
...
Fix up trivial conflict due to sock_owned_by_user() cleanup manually in
net/sunrpc/xprtsock.c
* 'nfs-server-stable' of git://linux-nfs.org/~bfields/linux:
knfsd: query filesystem for NFSv4 getattr of FATTR4_MAXNAME
knfsd: nfsv4 delegation recall should take reference on client
knfsd: don't shutdown callbacks until nfsv4 client is freed
knfsd: let nfsd manage timing out its own leases
knfsd: Add source address to sunrpc svc errors
knfsd: 64 bit ino support for NFS server
svcgss: move init code into separate function
knfsd: remove code duplication in nfsd4_setclientid()
nfsd warning fix
knfsd: fix callback rpc cred
knfsd: move nfsv4 slab creation/destruction to module init/exit
knfsd: spawn kernel thread to probe callback channel
knfsd: nfs4 name->id mapping not correctly parsing negative downcall
knfsd: demote some printk()s to dprintk()s
knfsd: cleanup of nfsd4 cmp_* functions
knfsd: delete code made redundant by map_new_errors
nfsd: fix horrible indentation in nfsd_setattr
nfsd: remove unused cache_for_each macro
nfsd: tone down inaccurate dprintk
This patch makes /proc/net per network namespace. It modifies the global
variables proc_net and proc_net_stat to be per network namespace.
The proc_net file helpers are modified to take a network namespace argument,
and all of their callers are fixed to pass &init_net for that argument.
This ensures that all of the /proc/net files are only visible and
usable in the initial network namespace until the code behind them
has been updated to be handle multiple network namespaces.
Making /proc/net per namespace is necessary as at least some files
in /proc/net depend upon the set of network devices which is per
network namespace, and even more files in /proc/net have contents
that are relevant to a single network namespace.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Changes asserts in sunrpc to use sock_owned_by_user() macro instead of
referencing sock_lock.owner directly.
Signed-off-by: John Heffner <jheffner@psc.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hopefully captured all single statement cases under net/. I'm
not too sure if there is some policy about #includes that are
"guaranteed" (ie., in the current tree) to be available through
some other #included header, so I just added linux/kernel.h to
each changed file that didn't #include it previously.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the address of the client that caused an error in
sunrpc/svc.c so that you get errors that look like:
svc: 192.168.66.28, port=709: unknown version (3 for prog 100003, nfsd)
I've seen machines which get bunches of unknown version or similar
errors from time to time, and while the recent patch to add the service
helps to find which service has the wrong version it doesn't help find
the potentially bad client.
The patch is against a checkout of Linus's git tree made on 2007-08-24.
One observation is that the svc_print_addr function prints to a buffer
which in this case makes life a little more complex; it just feels as if
there must be lots of places that print a connection address - is there
a better function to use anywhere?
I think actually there are a few places with semi duplicated code; e.g.
one_sock_name switches on the address family but only currently has
IPV4; I wonder how many other places are similar.
Signed-off-by: Dave Gilbert <linux@treblig.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
We've let svcauth_gss_accept() get much too long and hairy. The
RPC_GSS_PROC_INIT and RPC_GSS_PROC_CONTINUE_INIT cases share very little
with the other cases, so it's very natural to split them off into a
separate function.
This will also nicely isolate the piece of code we need to parametrize
to authenticating gss-protected NFSv4 callbacks on behalf of the NFS
client.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Acked-by: Neil Brown <neilb@suse.de>
xs_sendpages() may return a negative result. We sure as hell don't want to
add that to the 'tk_bytes_sent' tally...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch makes the needlessly global struct rpcb_program static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use correct type signage in gss_krb5_remove_padding() when doing length
calculations. Both xdr_buf.len and iov.iov_len are size_t, which is
unsigned; so use an unsigned type for our temporary length variable to
ensure we don't overflow it..
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Since 43780b87fa7..., rpc_create() fills in a default hostname based on
the ip address if the servername passed in is null. A small typo made
that default incorrect. (But this information appears to be used only
for debugging right now, so I don't believe the typo causes any bugs in
the current kernel.)
Thanks to Olga Kornievskaia for bug report and testing.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Olga Kornievskaia <aglo@citi.umich.edu>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
On the client, when an alternate server port is specified on the mount
commandline, we need to make sure gssd knows about it.
Also, on the server side, when we're sending krb5 callbacks to the
client, we'll use the same mechanism to let gssd know about the callback
port.
Thanks to Olga Kornievskaia for testing and for an earlier
implementation.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Olga Kornievskaia <aglo@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS performance metrics reported zero bytes sent per op when mounting with
UDP. The UDP socket transport wasn't properly counting the number of bytes
sent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This implements the interface from rpcrdma to the RDMA verbs interface
supported by Infniband and iWARP.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: James Lentini <jlentini@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This implements the marshaling and unmarshaling of the rpcrdma transport
headers. Connection management is also addressed.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This implements the configuration and building of the core transport
switch implementation of the rpcrdma transport. Stubs are provided for
the rpcrdma protocol handling, and the infiniband/iwarp verbs interface.
These are provided in following patches.
Signed-off-by: Tom Talpey <talpey@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Instead of an { address family, raw IP protocol number }-tuple, use the
newly-defined RPC identifier when creating clients in the upper layers.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To prepare for including non-sockets-based RPC transports, select
RPC transports by an identifier (to be used in following patches).
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To prepare for including non-sockets-based RPC transports, move the
sockets-dependent definitions into their own file.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To prepare for including non-sockets-based RPC transports, change the
overly suggestive name of the transport creation arguments struct.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow RPC client transport implementations to be loaded as needed, or
as they become available from distributors or third-party vendors.
Note that we leave the IP sockets implementation in sunrpc.o
permanently, as IP functionality is always available in any
kernel that runs NFS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To allow transport capabilities to be loaded dynamically, provide an API
for registering and unregistering the transports with the RPC client.
Eventually xprt_create_transport() will be changed to search the list of
registered transports when initializing a fresh transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
SUNRPC: add EXPORT_SYMBOL_GPL for generic transport functions
As a preface to allowing arbitrary transport modules to be loaded
dynamically, add EXPORT_SYMBOL_GPL for all generic transport functions
that a transport implementation might want to use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Acked-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adds a flag word to the xdrbuf struct which indicates any bulk
disposition of the data. This enables RPC transport providers to
marshal it efficiently/appropriately, and may enable other
optimizations.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rpcbind (v3+) netid is provided by each RPC client transport. This fixes
an omission in IPv6 rpcbind client support, and enables future extension.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the TCP/UDP rpcbind netid's from the rpcbind client to a global header.
Signed-off-by: Tom Talpey <tmt@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The purpose of an RPC ping (a NULL request) is to determine whether the
remote end is operating and supports the RPC program and version of the
request.
If we do an RPC bind and the remote's rpcbind service says "this
program or service isn't supported" then we have our answer already,
and we should give up immediately.
This is good for the kernel mount client, as it will cause the request
to fail, and then allow an immediate retry with different options.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add more new error code processing to the kernel's rpcbind client
and to call_bind_status() to distinguish two cases:
Case 1: the remote has replied that the program/version tuple is not
registered (returns EACCES)
Case 2: retry with a lesser rpcbind version (rpcb now returns EPFNOSUPPORT)
This change allows more specific error processing for each of these two
cases. We now fail case 2 instead of retrying... it's a server
configuration error not to support even rpcbind version 2. And don't
expose this new error code to user land -- convert it to EIO before
failing the RPC.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add new error code processing to the kernel's rpcbind client and to
call_bind_status() to distinguish two cases:
Case 1: the remote has replied that the program/version tuple is not
registered (returns -EACCES)
Case 2: another process is already in the middle of binding on this
transport (now returns -EAGAIN)
This change allows more specific retry processing for each of these two
cases.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When a server returns a bad rpcbind reply, make rpcbind client recovery logic
retry with an older protocol version. Older versions are more likely to work
correctly.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add better sanity checking of server replies to the GETVERSADDR reply
decoder. Change the error return code: EIO is what other XDR decoding
routines return if there is a failure while decoding.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_show_tasks’:
/home/cel/linux/net/sunrpc/clnt.c:1538: warning:
signed and unsigned type in conditional expression
This points out another case where a conditional expression returns a
signed value in one arm and an unsigned value in the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Check the length of the passed-in server name before trying to print it in
the log.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Noticed by Tom Talpey <tmt@netapp.com>:
OBTW, there's a nit on that memcpy, too. The r_addr is an array, so
memcpy(&map->r_addr
is passing the address of the array as a char **. It's the same as
map->r_addr, but technically the wrong type.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
/home/cel/linux/net/sunrpc/clnt.c: In function ‘rpc_bind_new_program’:
/home/cel/linux/net/sunrpc/clnt.c:445: warning:
comparison between signed and unsigned
RPC version numbers are u32, not int.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove one of two identical dprintk's that occur when an RPC client is
created.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix some problems with rpcbind v3 and v4 queries from the in-kernel rpcbind
client:
1. The r_addr argument must be a full universal address, not just an IP
address, and
2. The universal address in r_addr is the address of the remote rpcbind
server, not the RPC service being requested
This addresses bugzilla.kernel.org report 8891 for 2.6.23-rc and greater.
In addition, if the rpcbind client is unable to start the rpcbind request,
make sure not to leak the xprt.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
"Universal addresses" are a string representation of an IP address and
port. They are described fully in RFC 3530, section 2.2. Add support
for generating them in the RPC client's socket transport module.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Finalize support for setting up RPC client transports to remote RPC
services addressed via IPv6.
Based on work done by Gilles Quillard at Bull Open Source.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare for introduction of IPv6 versions of same.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Finishing a socket connect is the same for IPv4 and IPv6, so split it out
into a helper.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clone xs_bindresvport into two functions, one that can handle IPv4
addresses, and one that can handle IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We could clone xs_set_port, but this is easier overall.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare for adding IPv6 support to the RPC client by adding IPv6
capabilities to rpcbind. Note that this is support on the query side
only; registering IPv6 addresses with the local portmapper will come
later.
Note we have to take care not to fall back to using version 2 of the
rpcbind protocol if we're dealing with IPv6 address. Version 2 doesn't
support IPv6 at all.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare to add an IPv6 version of xs_format_peer_addresses by renaming it
to xs_format_ipv4_peer_addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add support for the NFS client's need to export volume information
with IP addresses formatted in hex instead of decimal.
This isn't used yet, but subsequent patches (not in this series) will
change the NFS client to use this functionality.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use more generic logic to free buffers holding formatted addresses. This
makes it less likely a bug will be introduced when adding additional buffer
types in xs_format_peer_address().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
include/linux/kernel.h gives us some nice macros for formatting IP
addresses. Use them.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This will allow rpc.gssd to use inotify instead of dnotify in order to
locate new rpc upcall pipes.
This also requires the exporting of __audit_inode_child(), which is used by
fsnotify_create() and fsnotify_mkdir(). Ccing David Woodhouse.
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
we upgraded the kernel of a nfs-server from 2.6.17.11 to 2.6.22.6. Since
then we get the message
lockd: too many open TCP sockets, consider increasing the number of nfsd threads
lockd: last TCP connect from ^\\236^\É^D
These random characters in the second line are caused by a bug in
svc_tcp_accept.
(Note: there are two previous __svc_print_addr(sin, buf, sizeof(buf))
calls in this function, either of which would initialize buf correctly;
but both are inside "if"'s and are not necessarily executed. This is
less obvious in the second case, which is inside a dprintk(), which is a
macro which expands to an if statement.)
Signed-off-by: Wolfgang Walter <wolfgang.walter@studentenwerk.mhn.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit aaf68cfbf2 added a bias
to sk_inuse, so this test for an unused socket now fails. So no
sockets get closed because they are old (they might get closed
if the client closed them).
This bug has existed since 2.6.21-rc1.
Thanks to Wolfgang Walter for finding and reporting the bug.
Cc: Wolfgang Walter <wolfgang.walter@studentenwerk.mhn.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch cleans up duplicate includes in
net/sunrpc/
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 4ada539ed7 lead to the unpleasant
possibility of an asynchronous rpc_task being required to call
rpciod_down() when it is complete. This again means that the rpciod
workqueue may get to call destroy_workqueue on itself -> hang...
Change rpciod_up/rpciod_down to just get/put the module, and then
create/destroy the workqueues on module load/unload.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The handling of the re-registration case is wrong here; the "test" that was
returned from auth_domain_lookup will not be used again, so that reference
should be put. And auth_domain_lookup never did anything with "new" in
this case, so we should just clean it up ourself.
Thanks to Akinobu Mita for bug report, analysis, and testing.
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Since every invocation of xdr encode or decode functions takes the BKL now,
there's a lot of redundant lock_kernel/unlock_kernel pairs that we can pull
out into a common function.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
use vfs_path_lookup instead of open-coding the necessary functionality.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Christoph Hellwig <hch@lst.de>
Cc: Neil Brown <neilb@suse.de>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We could return some sort of error in the case where someone asks for secinfo
on an export without the secinfo= option set--that'd be no worse than what
we've been doing. But it's not really correct. So, hack up an approximate
secinfo response in that case--it may not be complete, but it'll tell the
client at least one acceptable security flavor.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adds oid values to the gss_api mechanism structures. On the NFSV4 server
side, these are required as part of the security triple (oid,qop,service)
information being sent in the response of the SECINFO operation.
Signed-off-by: Usha Ketineni <uketinen@us.ibm.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We want it to be possible for users to restrict exports both by IP address and
by pseudoflavor. The pseudoflavor information has previously been passed
using special auth_domains stored in the rq_client field. After the preceding
patch that stored the pseudoflavor in rq_pflavor, that's now superfluous; so
now we use rq_client for the ip information, as auth_null and auth_unix do.
However, we keep around the special auth_domain in the rq_gssclient field for
backwards compatibility purposes, so we can still do upcalls using the old
"gss/pseudoflavor" auth_domain if upcalls using the unix domain to give us an
appropriate export. This allows us to continue supporting old mountd.
In fact, for this first patch, we always use the "gss/pseudoflavor"
auth_domain (and only it) if it is available; thus rq_client is ignored in the
auth_gss case, and this patch on its own makes no change in behavior; that
will be left to later patches.
Note on idmap: I'm almost tempted to just replace the auth_domain in the idmap
upcall by a dummy value--no version of idmapd has ever used it, and it's
unlikely anyone really wants to perform idmapping differently depending on the
where the client is (they may want to perform *credential* mapping
differently, but that's a different matter--the idmapper just handles id's
used in getattr and setattr). But I'm updating the idmapd code anyway, just
out of general backwards-compatibility paranoia.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a new field to the svc_rqst structure to record the pseudoflavor that the
request was made with. For now we record the pseudoflavor but don't use it
for anything.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I can never remember what the function to register to receive VM pressure
is called. I have to trace down from __alloc_pages() to find it.
It's called "set_shrinker()", and it needs Your Help.
1) Don't hide struct shrinker. It contains no magic.
2) Don't allocate "struct shrinker". It's not helpful.
3) Call them "register_shrinker" and "unregister_shrinker".
4) Call the function "shrink" not "shrinker".
5) Reduce the 17 lines of waffly comments to 13, but document it properly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: David Chinner <dgc@sgi.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (122 commits)
sunrpc: drop BKL around wrap and unwrap
NFSv4: Make sure unlock is really an unlock when cancelling a lock
NLM: fix source address of callback to client
SUNRPC client: add interface for binding to a local address
SUNRPC server: record the destination address of a request
SUNRPC: cleanup transport creation argument passing
NFSv4: Make the NFS state model work with the nosharedcache mount option
NFS: Error when mounting the same filesystem with different options
NFS: Add the mount option "nosharecache"
NFS: Add support for mounting NFSv4 file systems with string options
NFS: Add final pieces to support in-kernel mount option parsing
NFS: Introduce generic mount client API
NFS: Add enums and match tables for mount option parsing
NFS: Improve debugging output in NFS in-kernel mount client
NFS: Clean up in-kernel NFS mount
NFS: Remake nfsroot_mount as a permanent part of NFS client
SUNRPC: Add a convenient default for the hostname when calling rpc_create()
SUNRPC: Rename rpcb_getport to be consistent with new rpcb_getport_sync name
SUNRPC: Rename rpcb_getport_external routine
SUNRPC: Allow rpcbind requests to be interrupted by a signal.
...
Make all initialized struct seq_operations in net/ const
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need the BKL when wrapping and unwrapping; and experiments by Avishay
Traeger have found that permitting multiple encryption and decryption
operations to proceed in parallel can provide significant performance
improvements.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Avishay Traeger <atraeger@cs.sunysb.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In addition to binding to a local privileged port the NFS client should
allow binding to a specific local address. This is used by the server
for callbacks. The patch adds the necessary interface.
Signed-off-by: Frank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Save the destination address of an incoming request over TCP like is
done already for UDP. It is necessary later for callbacks by the server.
Signed-off-by: Frank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cleanup argument passing to functions for creating an RPC transport.
Signed-off-by: Frank van Maarseveen <frankvm@frankvm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A couple of callers just use a stringified IP address for the rpc client's
hostname. Move the logic for constructing this into rpc_create(), so it can
be shared.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up, for consistency. Rename rpcb_getport as rpcb_getport_async, to
match the naming scheme of rpcb_getport_sync.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In preparation for handling NFS mount option parsing in the kernel,
rename rpcb_getport_external as rpcb_get_port_sync, and make it available
always (instead of only when CONFIG_ROOT_NFS is enabled).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This allows NFS mount requests and RPC re-binding to be interruptible if the
server isn't responding.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add a refcount in order to ensure that the gss_auth doesn't disappear from
underneath us while we're freeing up GSS contexts.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We should almost always be deferencing the rpc_auth struct by means of the
credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up
that historical mistake, and remove the macro that propagated it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RPCSEC_GSS needs to be able to send NULL RPC calls to the server in order
to free up any remaining GSS contexts.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>