Unregister with usb stack if probe fails.
Not doing so was causing a kernel panic the next time
WLAN device was enumerated.
Change-Id: Ieeeca485774b41156f5587feaa4f7482746f6650
CRs-Fixed: 2263482
Adds support in pld_usb.c for registering with CNSS driver.
pld_usb can now register directly with Linux USB stack or with
CNSS driver.
For QCN7605, registration is to be done with CNSS.
Change-Id: Ibf7e51679e1848bcd8e1acfa43c457f42ff40c0b
CRs-Fixed: 2269602
Update pld soc info by structure member to decouple between pld soc info
with platform soc info.
Change-Id: I0e62d4784d7bccfb2f08d3678e1c78e6baaa9ca9
CRs-Fixed: 2268191
Fix compilation error while enabling QCA_WIFI_3_0_ADRASTEA
and CONFIG_CNSS2 flag for Genoa.
Change-Id: Ic44da39377f722c19edcd291d1b35fac1fee9462
CRs-Fixed: 2267927
When loading sdio driver, need make sure sdio device is recognized,
break driver loading if no device.
Change-Id: I4d47575d793b58970012e4e47cc63b0c197f565d
CRs-Fixed: 2245495
Address the following issue in the core/pld folder:
CHECK: 'bandwith' may be misspelled - perhaps 'bandwidth'?
Change-Id: Ic397c156ff7ba32cec590083098474af16569ea7
CRs-Fixed: 2241943
Qcacld supports multiple driver modules instance generation with
different file names and Kbuild options. Fix driver load time and
compilation errors on this feature.
Change-Id: Ib405e6c475bace31933a28dc64082f2b6c046da9
CRs-fixed: 2197749
Target register is safe to access only after FW ack the wlan
enable request, which is done in hif_enable. Hence set FW ready
state after that.
Change-Id: Ieeb7dd3e1a2400c7b2568869ac27cf7f745c20d5
CRs-Fixed: 2167736
Add device pointer in all PLD PCIe APIs in order to support
numerous WLAN devices.
Change-Id: Id9b2fb14ef3de715f6127ac2301d7ad87d493c14
CRs-fixed: 2134245
These APIs are used with legacy platform driver for PCIe bus based
targets which are no longer needed for new platform driver.
Change-Id: I6e01ea632e902f2c0a3a7cde07c85dfa835b84d3
CRs-fixed: 2134245
FW ready state guarantees the completion of 2nd stage power on
reset sequence of wcn3990 target.
Add fw ready uevent to update driver state, which is required
to check if target registers are accessible or not, while
recovery is in progress.
Change-Id: I78d56644d4d4ac3a0371be625a2debed8ac7cebf
CRs-Fixed: 2058451
WLAN self-recovery based on SDIO bus is currently missing in
CLD3.x, resulting in crash injection to TF card taking no
effect during some special case.
Add the recovery feature back to CLD3.x based on the same
logics in CLD2.0
Change-Id: I719b77ac9679a0449863a94b47ad22233bc9b574
CRs-fixed: 2103969
When uevent is introduced for integrated devices, it breaks
the PLD handling for PCIe devices. Hence correct it by using
proper enum.
Change-Id: Iacb5037932065f1822c1408d74f8aa3824ff0e71
CRs-fixed: 2114385
Enable support to use SKB Buffers allocated during bootup for
low memory targets.
CRs-Fixed: 2106466
Change-Id: Ia55c38767804c5915b9d29d3c61bff236d12cacd
Currently, cds_trigger_recovery is unconditional. Instead, avoid
triggering recovery if recovery is already in progress.
Change-Id: I5c77048701930591e0e520e07275e6f8631108a0
CRs-Fixed: 2070845
Remove unused APIs from PLD. These APIs are already replaced by
WLAN common utility APIs.
CRs-Fixed: 2093939
Change-Id: I187826e7433e93361e1e4d42c081cc2f31b661b3
Skip FW memory dump in SSR case for HL SDIO solution.
HL SDIO uses the diag read API to read by 4 bytes,
which is too slow to meet SSR time requirement.
Change-Id: Iacde90ab0ec84f29f3744bf4497ec8fd8517600a
CRs-Fixed: 2071329
Add the interface that host driver can trigger FW assert and do
recovery for QCA6290.
Change-Id: I03a9c374fd2ddc5cc46b9b0a98ce05bcf80a53ec
CRs-fixed: 2068035
Use cnss_utils APIs to set/get wlan info as these APIs are platform
independent.
CRs-Fixed: 2071683
Change-Id: Ia35a648a1d4dff308b830bce3b4e9992de2a2834
If platform has a mechanism to initiate target assert, trigger
that interface to force assert target. Certain integrated platforms
(where WLAN runs on it's own PD) provides a mechanism to initiate PDR
from host. That interface can be triggered when WLAN host detect
timeout scenarios.
CRs-Fixed: 1110243
Change-Id: I6a9408f47ca4245380dbf4177363c3c461ff948d
In function pld_pcie_uevent, pld_context->ops->uevent NULL check logic
is wrong so correct it.
Change-Id: I1bf9d8c8f5318b476761a458f5475107007dfa01
CRs-Fixed: 2058248
For TF sdio chip with platform driver, ramdump is
configured in platform driver. Driver can get the
virtual memory, but it can't call ioremap again.
If there is a platform driver, ramdump should be
allocated in platform driver, and if there is no
platform driver, ramdump should be allocated in
driver.
CRs-Fixed: 2066529
Change-Id: Ia2a32a4895f354e365522a30bbfac949ccb7a391
When FW assert happen, it won't do FW dump
if the bus type is SDIO.
Enable FW dump for SDIO target
Change-Id: I24655ca74003c915d9eda1106aad7cf87856947e
CRs-Fixed: 2010613
Update uevent status to hdd, based on the uevent received
from the platform driver
Change-Id: I1ac0fa61efa8b7f4f9d5e4e6abfcf969dbc1c592
CRs-fixed: 2027958
Platform driver icnss can provide uevent notification like FW
ready & FW crashed. Register the call back for notification and
update driver state for FW crashed indication so that driver
doesn't have to wait for shutdown call back to know FW crashed.
CRs-fixed: 2004309
Change-Id: I48afe8e023107aba8362324e3adabf6d50996b67
Add support of sending fw_log_mode to WLAN FW for QCA6290. WLAN FW
will decide whether to push its debug log through DIAG or not based
on this value.
CRs-Fixed: 2046631
Change-Id: I6c4ec8dbd65f8fc034381770bdef7e145b1d2b6a
1. The paths for driver to get ini and fw files
are incorrect for QCA SDIO chip on Dual-WiFi
platforms, with wrong prefix or no prefix.
Correct prefix for ini file, from '<mod_name>'
to '<chip_name>/'; add prefix '<chip_name>/'
for fw files.
2. For QCA9377, there is a special cnss API for getting
fw names, it's cnss_get_qca9377_fw_files().
Use the right cnss API to get fw files for QCA9377
Change-Id: Ia7616153b6823e9550703e649c7fc21ab306ca07
CRs-Fixed: 2008217
Add support for setting fw log mode for msm8998. Change the log mode
from bool type to tristate to support multiple log modes.
CRs-Fixed: 1115611
Change-Id: I6aef023d1e3cb1b68f1520f800af094f6f6decdb
Use dev_pm_ops for suspend/resume/suspend_noirq/resume_noirq ops in PLD
if there is no CNSS platform driver when using PCI bus.
Change-Id: Ib656cee2cd48cf15028397084ec8679627bce459
CRs-fixed: 1115528
Register suspend_noirq/resume_noirq callbacks to kernel. It will
make sure no wake up is pending from firmware and if initial wake
up is received then failing it should trigger resume.
Change-Id: I1882011cab7365a026827a60c44375f0f1dc6102
Swith to new recovery APIs with dev instance and recovery reason.
As recovery could have different mode and be target specific.
Change-Id: I26a1a2a0d23a687a5babcaf4ba4e5c6e788fedac
Implement update_status driver callback, which will be called
when platform driver wants to update wlan driver status.
CRs-Fixed: 1111424
Change-Id: I0c4a20119e383d00e2dbd395159351572b956566
These version 2 shadow registers are filled by HIF and sent to firmware
through QMI for QCA6290 chipset.
Change-Id: I92edb4140f707a933dacbe982eb4da167841b501
CRs-fixed: 1107457
CNSS2 platform driver is the only driver which will support PCIe
bus based discrete WLAN chipsets.
Change-Id: If2d3aded36d383e2e4b0dc4ec9e6ab9e1023f2a9
CRs-fixed: 1082183
Currently cnss_wlan_enable() and cnss_wlan_disable() APIs are only
used for a temporary emulation case for PCIe bus. Enable to compile
them for all cases for PCIe bus.
Change-Id: I27b1982f89e045564ed991c8a570ebf6a87bcf33
CRs-fixed: 1082183
Propagation from qcacld-2.0 to qcacld-3.0.
If the module name is changed to something other than wlan in
Makefile or Kbuild, then MULTI_IF_NAME is defined to be the module name.
When MULTI_IF_NAME is defined, the names for the config files, log files,
and firmware files are prepended or appended with MULTI_IF_NAME. This
prevents file name collisions allowing multiple instances of this driver
to be loaded with different module names.
Change-Id: Id880c5fe423eb0b2a2c01677d8fa7c4a784c74df
CRs-Fixed: 946520
Use correct variable name in argument while calling cnss_set_fw_debug_mode
cnss platform driver API to avoid compilation error for PCI based target.
Change-Id: I34d30cfd3113d379460124d423d0befa22a6bbd4
CRs-Fixed: 1091285
