Commit Graph

408 Commits

Author SHA1 Message Date
NeilBrown
6394cca548 [PATCH] md: fix recent breakage of md/raid1 array checking
A recent patch broke the ability to do a user-request check of a raid1.
This patch fixes the breakage and also moves a comment that was dislocated
by the same patch.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:31 -07:00
NeilBrown
8469219596 [PATCH] md: avoid backward event updates in md superblock when degraded.
If we
  - shut down a clean array,
  - restart with one (or more) drive(s) missing
  - make some changes
  - pause, so that they array gets marked 'clean',
the event count on the superblock of included drives
will be the same as that of the removed drives.
So adding the removed drive back in will cause it
to be included with no resync.

To avoid this, we only update the eventcount backwards when the array
is not degraded.  In this case there can (should) be no non-connected
drives that we can get confused with, and this is the particular case
where updating-backwards is valuable.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:31 -07:00
Daniel Kobras
c06aad854f [PATCH] dm: Fix deadlock under high i/o load in raid1 setup.
On an nForce4-equipped machine with two SATA disk in raid1 setup using dmraid,
we experienced frequent deadlock of the system under high i/o load.  'cat
/dev/zero > ~/zero' was the most reliable way to reproduce them: Randomly
after a few GB, 'cp' would be left in 'D' state along with kjournald and
kmirrord.  The functions cp and kjournald were blocked in did vary, but
kmirrord's wchan always pointed to 'mempool_alloc()'.  We've seen this pattern
on 2.6.15 and 2.6.17 kernels.  http://lkml.org/lkml/2005/4/20/142 indicates
that this problem has been around even before.

So much for the facts, here's my interpretation: mempool_alloc() first tries
to atomically allocate the requested memory, or falls back to hand out
preallocated chunks from the mempool.  If both fail, it puts the calling
process (kmirrord in this case) on a private waitqueue until somebody refills
the pool.  Where the only 'somebody' is kmirrord itself, so we have a
deadlock.

I worked around this problem by falling back to a (blocking) kmalloc when
before kmirrord would have ended up on the waitqueue.  This defeats part of
the benefits of using the mempool, but at least keeps the system running.  And
it could be done with a two-line change.  Note that mempool_alloc() clears the
GFP_NOIO flag internally, and only uses it to decide whether to wait or return
an error if immediate allocation fails, so the attached patch doesn't change
behaviour in the non-deadlocking case.  Path is against current git
(2.6.18-rc4), but should apply to earlier versions as well.  I've tested on
2.6.15, where this patch makes the difference between random lockup and a
stable system.

Signed-off-by: Daniel Kobras <kobras@linux.de>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-27 11:01:28 -07:00
Michal Miroslaw
485311a23c [PATCH] dm: BUG/OOPS fix
Fix BUG I tripped on while testing failover and multipathing.

BUG shows up on error path in multipath_ctr() when parse_priority_group()
fails after returning at least once without error.  The fix is to
initialize m->ti early - just after alloc()ing it.

BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000
 printing eip:
c027c3d2
*pde = 00000000
Oops: 0000 [#3]
Modules linked in: qla2xxx ext3 jbd mbcache sg ide_cd cdrom floppy
CPU:    0
EIP:    0060:[<c027c3d2>]    Not tainted VLI
EFLAGS: 00010202   (2.6.17.3 #1)
EIP is at dm_put_device+0xf/0x3b
eax: 00000001   ebx: ee4fcac0   ecx: 00000000   edx: ee4fcac0
esi: ee4fc4e0   edi: ee4fc4e0   ebp: 00000000   esp: c5db3e78
ds: 007b   es: 007b   ss: 0068
Process multipathd (pid: 15912, threadinfo=c5db2000 task=ef485a90)
Stack: ec4eda40 c02816bd ee4fc4c0 00000000 f7e89498 f883e0bc c02816f6 f7e89480
       f7e8948c c0281801 ffffffea f7e89480 f883e080 c0281ffe 00000001 00000000
       00000004 dfe9cab8 f7a693c0 f883e080 f883e0c0 ca4b99c0 c027c6ee 01400000
Call Trace:
 <c02816bd> free_pgpaths+0x31/0x45  <c02816f6> free_priority_group+0x25/0x2e
 <c0281801> free_multipath+0x35/0x67  <c0281ffe> multipath_ctr+0x123/0x12d
 <c027c6ee> dm_table_add_target+0x11e/0x18b  <c027e5b4> populate_table+0x8a/0xaf
 <c027e62b> table_load+0x52/0xf9  <c027ec23> ctl_ioctl+0xca/0xfc
 <c027e5d9> table_load+0x0/0xf9  <c0152146> do_ioctl+0x3e/0x43
 <c0152360> vfs_ioctl+0x16c/0x178  <c01523b4> sys_ioctl+0x48/0x60
 <c01029b3> syscall_call+0x7/0xb
Code: 97 f0 00 00 00 89 c1 83 c9 01 80 e2 01 0f 44 c1 88 43 14 8b 04 24 59 5b 5e 5f 5d c3 53 89 c1 89 d3 ff 4a 08 0f 94 c0 84 c0 74 2a <8b> 01 8b 10 89 d8 e8 f6 fb ff ff 8b 03 8b 53 04 89 50 04 89 02
EIP: [<c027c3d2>] dm_put_device+0xf/0x3b SS:ESP 0068:c5db3e78

Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl>
Acked-by: Alasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-14 12:54:29 -07:00
NeilBrown
f9abd1ace4 [PATCH] md: Fix a bug that recently crept into md/linear
A recent patch that allowed linear arrays to be reconfigured on-line
allowed in a bug which results in divide by zero - not all
mddev->array_size were converted to conf->array_size.

This patch finished the conversion and fixed the bug.

The offending patch was commit 7c7546ccf6.

Thanks to Simon Kirby <sim@netnation.com> for the bug report.

Cc: Simon Kirby <sim@netnation.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-08-06 08:57:46 -07:00
Andrew Morton
d0a0a5ee7a [PATCH] md: fix oops in error-handling
During early MD setup (superblock reading), we don't have a personality yet.
But the error-handling code tries to dereference mddev->pers.  Fix.

Acked-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
d695043259 [PATCH] md: include sector number in messages about corrected read errors
This is generally useful, but particularly helps see if it is the same sector
that always needs correcting, or different ones.

[akpm@osdl.org: fix printk warnings]
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
67463acb64 [PATCH] md: require CAP_SYS_ADMIN for (re-)configuring md devices via sysfs
The ioctl requires CAP_SYS_ADMIN, so sysfs should too.  Note that we don't
require CAP_SYS_ADMIN for reading attributes even though the ioctl does.
There is no reason to limit the read access, and much of the information is
already available via /proc/mdstat

Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
80ca3a44f5 [PATCH] md: unify usage of symbolic names for perms
Some places we use number (0660) someplaces names (S_IRUGO).  Change all
numbers to be names, and change 0655 to be what it should be.

Also make some formatting more consistent.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
5e3db645f8 [PATCH] md: fix usage of wrong variable in raid1
Though it rarely matters, we should be using 's' rather than r1_bio->sector
here.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
ae3c20ccf8 [PATCH] md: fix some small races in bitmap plugging in raid5
The comment gives more details, but I didn't quite have the sequencing write,
so there was room for races to leave bits unset in the on-disk bitmap for
short periods of time.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:17 -07:00
NeilBrown
7c785b7a18 [PATCH] md: fix a plug/unplug race in raid5
When a device is unplugged, requests are moved from one or two (depending on
whether a bitmap is in use) queues to the main request queue.

So whenever requests are put on either of those queues, we should make sure
the raid5 array is 'plugged'.  However we don't.  We currently plug the raid5
queue just before putting requests on queues, so there is room for a race.  If
something unplugs the queue at just the wrong time, requests will be left on
the queue and nothing will want to unplug them.  Normally something else will
plug and unplug the queue fairly soon, but there is a risk that nothing will.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
ff4e8d9a9f [PATCH] md: fix resync speed calculation for restarted resyncs
We introduced 'io_sectors' recently so we could count the sectors that causes
io during resync separate from sectors which didn't cause IO - there can be a
difference if a bitmap is being used to accelerate resync.

However when a speed is reported, we find the number of sectors processed
recently by subtracting an oldish io_sectors count from a current
'curr_resync' count.  This is wrong because curr_resync counts all sectors,
not just io sectors.

So, add a field to mddev to store the curren io_sectors separately from
curr_resync, and use that in the calculations.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
0b8c9de05c [PATCH] md: delay starting md threads until array is completely setup
When an array is started we start one or two threads (two if there is a
reshape or recovery that needs to be completed).

We currently start these *before* the array is completely set up and in
particular before queue->queuedata is set.  If the thread actually starts
very quickly on another CPU, we can end up dereferencing queue->queuedata
and oops.

This patch also makes sure we don't try to start a recovery if a reshape is
being restarted.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
31b65a0d38 [PATCH] md: set desc_nr correctly for version-1 superblocks
This has to be done in ->load_super, not ->validate_super

Without this, hot-adding devices to an array doesn't always
work right - though there is a work around in mdadm-2.5.2 to
make this less of an issue.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
NeilBrown
f4370781d8 [PATCH] md: possible fix for unplug problem
I have reports of a problem with raid5 which turns out to be because the raid5
device gets stuck in a 'plugged' state.  This shouldn't be able to happen as
3msec after it gets plugged it should get unplugged.  However it happens
none-the-less.  This patch fixes the problem and is a reasonable thing to do,
though it might hurt performance slightly in some cases.

Until I can find the real problem, we should probably have this workaround in
place.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
Ingo Molnar
663d440eaa [PATCH] lockdep: annotate blkdev nesting
Teach special (recursive) locking code to the lock validator.

Effects on non-lockdep kernels:

- the introduction of the following function variants:

  extern struct block_device *open_partition_by_devnum(dev_t, unsigned);

  extern int blkdev_put_partition(struct block_device *);

  static int
  blkdev_get_whole(struct block_device *bdev, mode_t mode, unsigned flags);

 which on non-lockdep are the same as open_by_devnum(), blkdev_put()
 and blkdev_get().

- a subclass parameter to do_open(). [unused on non-lockdep]

- a subclass parameter to __blkdev_put(), which is a new internal
  function for the main blkdev_put*() functions. [parameter unused
  on non-lockdep kernels, except for two sanity check WARN_ON()s]

these functions carry no semantical difference - they only express
object dependencies towards the lockdep subsystem.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 15:27:10 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
602cada851 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits)
  [PATCH] devfs: Remove it from the feature_removal.txt file
  [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
  [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV
  [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
  [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
  [PATCH] devfs: Remove devfs_remove() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree
  [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
  [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree
  [PATCH] devfs: Remove devfs support from the sound subsystem
  [PATCH] devfs: Remove devfs support from the ide subsystem.
  [PATCH] devfs: Remove devfs support from the serial subsystem
  [PATCH] devfs: Remove devfs from the init code
  [PATCH] devfs: Remove devfs from the partition code
  ...
2006-06-29 14:19:21 -07:00
Adrian Bunk
cfb9e32f2f [PATCH] drivers/md/raid5.c: remove an unused variable
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 10:26:21 -07:00
Greg Kroah-Hartman
890fbae281 [PATCH] devfs: Last little devfs cleanups throughout the kernel tree.
Just removes a few unused #defines and fixes some comments due to
devfs now being gone.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:09 -07:00
Greg Kroah-Hartman
ce7b0f46bb [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed
And remove the now unneeded number field.
Also fixes all drivers that set these fields.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman
96192ff1a9 [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed
Also fixes all drivers that set this field.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman
ff23eca3e8 [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree
Also fixes up all files that #include it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:08 -07:00
Greg Kroah-Hartman
8ab5e4c15b [PATCH] devfs: Remove devfs_remove() function from the kernel tree
Removes the devfs_remove() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:07 -07:00
Greg Kroah-Hartman
1a715c5cf9 [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree
Removes the devfs_mk_bdev() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:06 -07:00
Greg Kroah-Hartman
95dc112a57 [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree
Removes the devfs_mk_dir() function and all callers of it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26 12:25:06 -07:00
Adrian Bunk
0538195424 [PATCH] drivers/md/md.c: make code static
Make needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:40 -07:00
NeilBrown
f655675b3f [PATCH] md: Allow the write_mostly flag to be set via sysfs
It appears in /sys/mdX/md/dev-YYY/state
and can be set or cleared by writing 'writemostly' or '-writemostly'
respectively.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:40 -07:00
NeilBrown
a94213b1fa [PATCH] md: Allow resync_start to be set and queried via sysfs
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:40 -07:00
NeilBrown
d4dbd0250e [PATCH] md: Allow raid 'layout' to be read and set via sysfs
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
45dc2de1e5 [PATCH] md: Allow rdev state to be set via sysfs
The md/dev-XXX/state file can now be written:

 "faulty" simulates an error on the device
 "remove" removes the device from the array (if it is not busy)

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
9e653b6342 [PATCH] md: Set/get state of array via sysfs
This allows the state of an md/array to be directly controlled via sysfs and
adds the ability to stop and array without tearing it down.

Array states/settings:

 clear
     No devices, no size, no level
     Equivalent to STOP_ARRAY ioctl
 inactive
     May have some settings, but array is not active
        all IO results in error
     When written, doesn't tear down array, but just stops it
 suspended (not supported yet)
     All IO requests will block. The array can be reconfigured.
     Writing this, if accepted, will block until array is quiescent
 readonly
     no resync can happen.  no superblocks get written.
     write requests fail
 read-auto
     like readonly, but behaves like 'clean' on a write request.

 clean - no pending writes, but otherwise active.
     When written to inactive array, starts without resync
     If a write request arrives then
       if metadata is known, mark 'dirty' and switch to 'active'.
       if not known, block and switch to write-pending
     If written to an active array that has pending writes, then fails.
 active
     fully active: IO and resync can be happening.
     When written to inactive array, starts with resync

 write-pending (not supported yet)
     clean, but writes are blocked waiting for 'active' to be written.

 active-idle
     like active, but no writes have been seen for a while (100msec).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
4254376914 [PATCH] md: Don't write dirty/clean update to spares - leave them alone
- record the 'event' count on each individual device (they
  might sometimes be slightly different now)
- add a new value for 'sb_dirty': '3' means that the super
  block only needs to be updated to record a clean<->dirty
  transition.
- Prefer odd event numbers for dirty states and even numbers
  for clean states
- Using all the above, don't update the superblock on
  a spare device if the update is just doing a clean-dirty
  transition.  To accomodate this, a transition from
  dirty back to clean might now decrement the events counter
  if nothing else has changed.

The net effect of this is that spare drives will not see any IO requests
during normal running of the array, so they can go to sleep if that is what
they want to do.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
07d84d109d [PATCH] md: Allow re-add to work on array without bitmaps
When an array has a bitmap, a device can be removed and re-added and only
blocks changes since the removal (as recorded in the bitmap) will be resynced.

It should be possible to do a similar thing to arrays without bitmaps.  i.e.
if a device is removed and re-added and *no* changes have been made in the
interim, then the add should not require a resync.

This patch allows that option.  This means that when assembling an array one
device at a time (e.g.  during device discovery) the array can be enabled
read-only as soon as enough devices are available, but extra devices can still
be added without causing a resync.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
3285edf152 [PATCH] md: Fix bug that stops raid5 resync from happening
As data_disks is *less* than raid_disks, the current test here is obviously
wrong.  And as the difference is already available in conf->max_degraded, it
makes much more sense to use that.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
akpm@osdl.org
b3cc9ec76b [PATCH] md: Fix Kconfig error
RAID5 recently changed to RAID456

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
Justin Piszcz
4d2554d045 [PATCH] md: md Kconfig speeling feex
I was experimenting with Linux SW raid today and found a spelling error when
reading the help menus...  (and fly spell found more).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
8838832830 [PATCH] md: Calculate correct array size for raid10 in new offset mode
The size calculation made assumtion which the new offset mode didn't
follow.  This gets the size right in all cases.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:39 -07:00
NeilBrown
ce25c31bdd [PATCH] md: Change md/bitmap file handling to use bmap to file blocks-fix
Fix problems with new bmap based access to bitmap files.

1/ When not using a file based bitmap, attach a NULL list of buffers
   to each page so the common free_buffer routine can cope.
2/ Use submit_bh to read as well as write, rather than vfs_read.
   This makes read and write more symetric.
3/ sync the file before reading, to ensure that the page cache has no
   dirty pages that might get written out later.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
d785a06a0b [PATCH] md/bitmap: change md/bitmap file handling to use bmap to file blocks
If md is asked to store a bitmap in a file, it tries to hold onto the page
cache pages for that file, manipulate them directly, and call a cocktail of
operations to write the file out.  I don't believe this is a supportable
approach.

This patch changes the approach to use the same approach as swap files.  i.e.
bmap is used to enumerate all the block address of parts of the file and we
write directly to those blocks of the device.

swapfile only uses parts of the file that provide a full pages at contiguous
addresses.  We don't have that luxury so we have to cope with pages that are
non-contiguous in storage.  To handle this we attach buffers to each page, and
store the addresses in those buffers.

With this approach the pagecache may contain data which is inconsistent with
what is on disk.  To alleviate the problems this can cause, md invalidates the
pagecache when releasing the file.  If the file is to be examined while the
array is active (a non-critical but occasionally useful function), O_DIRECT io
must be used.  And new version of mdadm will have support for this.

This approach simplifies a lot of code:
 - we no longer need to keep a list of pages which we need to wait for,
   as the b_endio function can keep track of how many outstanding
   writes there are.  This saves a mempool.
 - -EAGAIN returns from write_page are no longer possible (not sure if
    they ever were actually).

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
acc55e2201 [PATCH] md/bitmap: tidy up i_writecount handling in md/bitmap
md/bitmap modifies i_writecount of a bitmap file to make sure that no-one else
writes to it.  The reverting of the change is sometimes done twice, and there
is one error path where it is omitted.

This patch tidies that up.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
0cdd02cabd [PATCH] md/bitmap: remove dead code from md/bitmap
bitmap_active is never called, and the BITMAP_ACTIVE flag is never users or
tested, so discard them both.

Also remove some out-of-date 'todo' comments.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
a647e4bc5c [PATCH] md/bitmap: remove unnecessary page reference manipulations from md/bitmap code
md/bitmap gets a collection of pages representing the bitmap when it
initialises the bitmap, and puts all the references when discarding the
bitmap.

It also occasionally takes extra references without any good reason, and
sometimes drops them ...  though it doesn't always drop them, which can result
in a memory leak.

This patch removes the unnecessary 'get_page' calls, and the corresponding
'put_page' calls.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
e16b68b6e4 [PATCH] md/bitmap: use set_bit etc for bitmap page attributes
In particular, this means that we use 4 bits per page instead of a whole
unsigned long.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
ec7a3197f4 [PATCH] md/bitmap: cleaner separation of page attribute handlers in md/bitmap
md/bitmap has some attributes per-page.  Handling of these attributes in
largely abstracted in set_page_attr and clear_page_attr.  However
get_page_attr exposes the format used to store them.  So prior to changing
that format, introduce test_page_attr instead of get_page_attr, and make
appropriate usage changes.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
0b79ccf0cd [PATCH] md/bitmap: remove bitmap writeback daemon
md/bitmap currently has a separate thread to wait for writes to the bitmap
file to complete (as we cannot get a callback on that action).

However this isn't needed as bitmap_unplug is called from process context and
waits for the writeback thread to do it's work.  The same result can be
achieved by doing the waiting directly in bitmap_unplug.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
d7375ab324 [PATCH] md/bitmap: fix online removal of file-backed bitmaps
When "mdadm --grow /dev/mdX --bitmap=none" is used to remove a filebacked
bitmap, the bitmap was disconnected from the array, but the file wasn't closed
(until the array was stopped).

The file also wasn't closed if adding the bitmap file failed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:38 -07:00
NeilBrown
52c03291a8 [PATCH] md: split reshape portion of raid5 sync_request into a separate function
... as raid5 sync_request is WAY too big.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:37 -07:00
Adrian Bunk
5e56341d02 [PATCH] md: make md_print_devices() static
This patch makes the needlessly global md_print_devices() static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:37 -07:00