Add a compile time feature flag by name RX_DESC_MULTI_PAGE_ALLOC
which will enable the memory allocation of RX descriptors using
multiple pages instead of large contiguous memory.
Change-Id: Ia3803a3685c605c79a34a0c2c000d7ed4adb7d97
CRs-Fixed: 2456267
WMI_STA_PS_PARAM_INACTIVITY_TIME and
WMI_STA_PS_PARAM_MAX_RESET_ITO_COUNT_ON_TIM_NO_TXRX
need to be sent as WMI_STA_POWERSAVE_PARAM_CMDID param IDs.
Thus use pmo_tgt_send_vdev_sta_ps_param instead of
pmo_tgt_vdev_update_param_req in appropriate locations.
Change-Id: Ie9438cd88540a9bbcaf120b3d0a32d355f85002d
CRs-fixed: 2457998
The ini param oce_sta_enable is getting read before parsing the
ini conf file, to set few OCE related wiphy flags. None of these
flags are getting set as it is resulting 0.
Move this to an API after parsing the ini file.
Change-Id: Ibf61996da4cc6b69892a5f2fe325b42c39f5fce3
CRs-Fixed: 2449519
To build multipel ko for different wlan targets, add genoa support
which will be used on AUTO platform.
Change-Id: I55e8591624ca4fe03bc06572cd2c46510eded366
CRs-Fixed: 2429383
Remove CONFIG_MCL for Serialization msg queue depth to make code generic.
Initialize value for Serialization msg queue depth i.e
SCHEDULER_CORE_MAX_MESSAGES to 1000 for MCL. In case
SCHEDULER_CORE_MAX_MESSAGES not defined, then
SCHEDULER_CORE_MAX_MESSAGES define to 4000 for WIN.
Change-Id: I498cfb73ed7774d9d26b1374ee87b1a7691341d9
CRs-Fixed: 2457704
Userspace request driver to report details of each beacon
received whose bssid is same as currently connected BSS's
mac address. The driver encapsulates the details of these
beacons as an asynchronous event within vendor command:
QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING with operation
type QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP until
userspace requests to stop sending beacons.
When driver gets stop indication from userspace, it does
the following things:
1. De-register all callback which is registered while handling
start indication
2. Add beacon filter and send it to fw
If driver is in WOW mode and WMI_ADD_BCN_FILTER_CMDID is
NOT configured, fw wakeup HOST and sends connected AP beacon.
Fw should not wakeup host if host is in wow mode. In order
to support this, configure WOW_BEACON_EVENT for STA and P2P.
Change-Id: Ie7c768fa957d02e1361e1ecb95435ba3f06034b0
CRs-Fixed: 2431360
In roaming scenario when there is no hw_mode change is required, roam
failure is sent to CSR which is causing move VDEV from INIT state to
EV_DOWN. In this case, wma_target_req buffer expected instead of
scheduler_msg. As the wrong buffer is passed, it is causing a
system instability.
Fix is not to send reassoc failure for LFR2 when there is
no change in hw_mode required and go ahead with connect.
Change-Id: I7cc7b0ee1407e04c47177838fc069db5b90353d7
CRs-Fixed: 2451178
Read mcc to scc INI to enforce SCC when starting GO in multi
concurrency scenario such as STA+GO.
Change-Id: Iba276cc0afd97119651a12bbefefaccadfc6c500
CRs-Fixed: 2456452
Host need to fill netbuf with qtime instead of tsf. So host first
need to set enable_ppdu_end to 1, so that FW will pass ppdu_end
contents to host, and host can translate tsf64_time into qtime.
The tsf64_time is new added to fw struture, so host will need
add it accordingly to struct hdd_adapter, and keep it updated
in time synchronization function <hdd_update_timestamp>.
Change-Id: Ib19ac1411c4e17624c012f188297c9f2122642d2
CRs-Fixed: 2444456
All INI configuration about modules log level which removed in
previous change "Change-Id: I9c519cf2509e3dc22282f0c7ea6f52cbd2913ccd",
add one INI item for log level of all modules.
Change-Id: Icaedb6bd61a18a81cea9e75e076fe64b11e5bde0
CRs-Fixed: 2442788
TDLS is disabled if second connection comes up.
If that second connection fails then enable
the TDLS again.
Change-Id: Id5df1df81c94bcf3a0616bbfb4b33f3e4d81dcbe
CRs-Fixed: 2445831
This change I29209576622bc2495a7ce3064e82efca2e70d19a was to fix a
memory leak, but ibss creating peer pass a pointer on stack to
wma_set_stakey API, it makes a regression.
Fix it by passing all pointer from heap to wma_set_stakey API.
Change-Id: I178e4b6a15aa24faae78d9846427b3292d11a1a4
CRs-Fixed: 2455529
Change I9d29c141106db479039789d67c45a455e96a118b introduced a WAR for
a BT coex issue. Now that an updated version of HW is available that
does not need the WAR, only apply the WAR if the hardware version
requires it.
Change-Id: Id204163e81a802d16f1a9ffc78bbfcf2549c7dfb
CRs-Fixed: 2437433
Currently LFR band specific ini attributes 5g_rssi_boost_threshold
and 5g_rssi_penalize_threshold programmed with wrong type and range.
This can lead to ignore user-input and always use default value.
To fix this, correct min and max ini values for 5Ghz network RSSI
boost/penalty preference.
Change-Id: If89c09fb1343a68dfaa7241b5ec14b046d1bb758
CRs-Fixed: 2452128
Scenario:
1. Start SAP on any potential LTE-COEX channel.
2. SAP would restart when it gets the event of unsafe channel.
Observation:
SAP restarts on a channel not in ACS channel list.
Expectation:
SAP should restart in channels given by the user
space only which are configured by hostapd.
Issue with driver:
Currently in wlansap_filter_ch_based_acs, the driver
eliminates the channels based upon the ACS start, and
end channel, and not the channel list, which can lead
to almost all the channels being picked, and none eliminated
if the start channel was 1, and end channel was 165, even
when only two channels, say 1 and 165 only were present
in ACS channel list.
Fix:
Fix is to eliminate all the candidate channels which were
not part of the ACS channel list, and pick only those channels
that were part of initial do_acs request.
Change-Id: Ib3b0b0a77c07b423b66e99feb085a370ed01f2de
CRs-Fixed: 2454270
Scenario:
1. Turn on STA and try connect with a PMF capable AP.
2. Configure te AP to reject assoc everytime, with status
code as ASSOC TRY AGAIN.
Issue with DUT:
STA would try again after the time t, which the AP has
specified in the assoc rsp frame, and if the AP sends
the assoc rsp fail continuosly with reason code try again,
then the active command timeout may happen as the
active command to connect would be stuck.
Observation:
Active command timeout happens, because the AP sends
the assoc rsp with the reason code try again and time
after every attempt.
Expectation:
The AP should be added to RSSI reject list, keeping RSSI
as 0, and retry delay as the time specified by AP, which would
result in connection attempt to that AP after the timeout, also
the STA would then continue with the other candidates.
Fix:
Fill the retry delay as the timeout value AP has given, RSSI as
0, and add the BSSID to the reject list, and continue connect
with other BSSIDs
Change-Id: If6155906a586539b3edef3e25bcad4f1e77159c3
CRs-Fixed: 2453875
In function hdd_hostapd_sap_event_cb() there are variables that are
defined in the stack. This can cause stack overflow in certain cases.
Change the declaration of the variables to dynamic memory allocation.
Change-Id: Ic8dca63c57110a92f19a438b2ea9c7ab9936af97
CRs-Fixed: 2446590
Currently, host sends 11k offload command to FW as part of RSO Start
and 11k offload disables to FW during RSO Stop. In case of STA+STA
concurrency, Host sends vdev_stop before 11k_deconfig for
currently enabled STA results to assert in FW.
In order to configure 11k for second STA without assertion, Driver
should de-config 11k for currently enabled STA before vdev stop/delete.
Fix is to configure 11k while start roaming and de-configure 11k
while stop roaming irrespective of the reason for roaming STOP.
Change-Id: I0915d8a0141194c331eb59ba0f2dfa9c8995628a
CRs-Fixed: 2449431
With feature flag for LFR2 disabled, there is compilation
failure in the wlan host driver.
Fix the compilation issues.
Change-Id: Ic21ccd0b313c6690c72a6546eba30c1ecb306cb0
CRs-Fixed: 2453298
