In wlan_mlme_configure_chain_mask(),mlme_legacy_err is
updated to mlme_legacy_debug,as its not an error condition.
Change-Id: Ibdf33124ee970bcfcc9d57df9f3b3fc6990072fe
CRs-Fixed: 2599510
lim_is_pkt_candidate_for_drop() uses sta_ds to update last assoc
and deauth/disasocc received time without taking any lock for
sta_ds. deletion of sta_ds in pe_delete_session before accessing
sta_ds in dph_lookup_hash_entry can lead lead to Assert.
Similar is the case with sta_ds->last_assoc_received_time and
sta_ds->last_disassoc_deauth_received_time.
Fix is to use peer_priv instead of sta_ds and update
last_assoc_received_time and last_disassoc_deauth_received_time of
peer_mlme_priv_obj. In this case refcount gets increased for valid
peer and peer won't be deleted until lim_is_pkt_candidate_for_drop
releases the ref count of the peer.
Change-Id: I9daf31f9dd7b509eaf38a93078bb7418605b1c74
CRs-Fixed: 2598841
Set the default software retry limit value to 16 and fix the typo
in configuring the non aggregation software retry limit.
Change-Id: Ia6ef7cc39f47ef91c2c338e48561e0275445750f
CRs-Fixed: 2599467
CRYPTO_SET_KEY_CONVERGED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag in MAC layer.
Change-Id: I34fb7a6a67dd6dba3fa69c98ef10a1bd51383e36
CRs-fixed: 2593525
6Ghz SAP needs to send either a probe response or fils
discovery at every 20ms.
Add a new ini to configure the probe response or
fils discovery frame.
enable_6g_sap_fils_discovery=1 sends fils discovery frame
at every 20ms.
enable_6g_sap_fils_discovery=0 sends probe response frame
at every 20ms
Change-Id: I6c5fb339135cf11be071d73970ea3704441380eb
CRs-Fixed: 2586524
When roaming is complete, firmware sends WMI_ROAM_STATS_EVENTID
to host driver. This event has details regarding the roam
trigger reason, roam scan and candidate details, roaming result
and 11kv info sent after roaming to AP. Parse this event and
fill the below diag log report to print this in logcat:
LOG_WLAN_AUTH_ASSOC_TX_RX_INFO
LOG_WLAN_ROAM_TRIGGER_INFO
LOG_WLAN_ROAM_SCAN_INFO
LOG_WLAN_ROAM_RESULT_INFO
LOG_WLAN_RRM_TX_RX_INFO
Change-Id: Ie09dc8ad5b236d0925327dba73a3f2e73a80109a
CRs-Fixed: 2597057
Currently, framework issues NAN commands on station interface.
But when connection happens, framework does interface down and
up on the station interface due to MAC randomization. This
terminates all of the NAN operations.
So NAN discovery needs a separate interface to avoid dependency
on the station interface. Create an interface "wifi-aware0"
of type NL80211_IFTYPE_NAN based on the firmware capability
and register to kernel.
Framework issues "IF UP" on the new NAN discovery interface when
it enables NAN. Driver shall create vdev and send VDEV_CREATE
command to firmware for the same. Framework shall issue all
NAN discovery commands on this new interface. Driver shall use
NAN vdev for these NAN operations.
Framework shall do "IF DOWN" once the NAN operations
are done(Ex: up on NAN disable).
Change-Id: Ifd1e1ab5ed64cd97edb00e793214edd2a2365274
CRs-Fixed: 2592020
Currently, There is no support to disable ring buffer. Each Ring
buffers is using 2MB and overall 10MB is consumed by 5 ring buffers.
Fix is to add ini support to enable/disable ring buffer.
Boolean ini CFG_ENABLE_RING_BUFFER is added. Default value of
gEnableRingBuffer is 1 which indicates that ring buffers are enabled
by default.
CRs-Fixed: 2592476
Change-Id: I30f95668de6df96e5c388e92e202f8c236132dc2
Currently, after FINAL_BMISS detection, FW does channel map
based partial scan followed by one full scan if no candidate
found in partial scan to ROAM to another available AP without
disconnection. This results in additional delay by HOST in
issuing disconnection after a heartbeat failure.
Add INI support (bmiss_skip_full_scan) to allow FW to decide
whether firmware does channel map based partial scan or partial
scan followed by full scan in case no candidate is found in
partial scan after final BMISS.
Change-Id: I48f9bb43bb7933e9ff173f618586ea5986530dcd
CRs-Fixed: 2578848
Change max value of tx_bf_cap to 4294967295 from -1
which is misconfigured. 4294967295 corresponds to
0xFFFFFFFF which is max value for 32 bit unsigned
int since this CFG item is getting used as part of
4 byte dot11f HT capability population.
Change-Id: Ifd0fea080dd9eb1f6995af0df20c68e3f73b891a
CRs-Fixed: 2581060
In 11D scan procedure if WMI_11D_NEW_COUNTRY_EVENTID event is
received, host processes 11d new country code event.
Host driver as a response sends WMI_SCAN_CHAN_LIST_CMDID
new channel list cmd to firmware.
As a result the ongoing scan procedure is aborted by firmware,
and if the scan was a first scan for connection, then it would
lead to connection latency as the supplicant then have to
scan again.
Fix is to check if any scan is in progress, then delay
WMI_SCAN_CHAN_LIST_CMDID channel list command to FW till
the current scan is complete.
Change-Id: I4e747bb747c32430b5d8024823aa0df4928a8c71
CRs-Fixed: 2569741
Currently, default MGMT retry limit is 4 which means 4
transmissions are supported for any management frame.
In noisy environment, Chances to get connection failure
are higher with 4 retransmissions.
Fix is to add INI support mgmt_retry_max to make
CFG_MGMT_RETRY_MAX configurable. Default value for
CFG_MGMT_RETRY_MAX is 15 to reduce the chances of connection
failure in noisy environment.
Change-Id: Id50cb68813fba517a8a1580a3d6662c73b0a381e
CRs-Fixed: 2575385
The event WMI_ROAM_STATS_EVENTID is received after
every roam, once the roam synch complete is sent by the host.
This event contains details regarding the roam trigger reason,
values associated with the trigger, roam scan candidate info,
roam status, roam failure reason.
This helps in debugging/understanding the scenario when roam
failure happens.
WMI_ROAM_STATS_EVENTID Format:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_stats_event_fixed_param |-> Contains vdev id and number of
| roams detail.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
roam_trigger data TLV |-> Has details on the roam trigger
| reason. Number of roam triggers
| TLV detail is present in the
| fixed param. Maximum 5 roam
| per event is supported
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_info TLV |-> Has details on the roam scan -
| scan type, rssi threshold,
| reason.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_scan_channel_info |-> Has details on the roam scan
TLV | channels. Number of channels
| per trigger is found on the
| wmi_roam_scan_info TLV.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_ap_info TLV |-> Has details on Roam candidate
| APs found during scan. Number
| of roam candidate APs per
| trigger is found on the
| on the wmi_roam_scan_info tlv.
| Max 8 candidates are allowed
| per roam scan.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_result TLV |-> Info on roam success or failure.
| Fail reason, if roaming failed.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_report_info|->After roaming, firmware sends
TLV | neighbor/btm report to roamed AP
| to get list of roam candidates.
| This tlv provides info on this.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
wmi_roam_neighbor_channel_info|-> This has the info on the
| channel list received as part
| of BTM/Neighbor report.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Print the info received as part of this event into kmsg.
Featurize all the function defines for this roam logging under
WLAN_FEATURE_ROAM_OFFLOAD flag.
Change-Id: Iddc70b572f2e3dc47f08fd1c3c3597cb44981a17
CRs-Fixed: 2576222
Change the default value of normalize weight ini to
disable all non-PSC 6ghz channels for the SAP ACS
operation, and give weightage only to the PSC
frequencies.
Change-Id: I4c8f349a396ffe4a2f378a59f5a67036b9d573eb
CRs-Fixed: 2578824
As part of the new changes, vdev mlme object will be freed before
the vdev delete response is received from the firmware. Hence do
not use the vdev_mlme object in the vdev delete response handler.
Change-Id: Idec5775f6c7ac767baedd173a7bde0d3a358d0fe
CRs-Fixed: 2563381
Currently, RSNE if given from userspace is overrided if the Ini
force_rsne_override is disabled as a security. But there
are sufficient checks already in kernel to validatethe RSNE
given by userspace. Hence this INI is no longer required.
Change-Id: Ifcc9298dcfa035d05e9ee4fb78a4fa2c9f249461
CRs-Fixed: 2573540
Based on the ini gfine_time_meas_cap, send enable/disable value to the
firmware for STA INITIATOR/RESPONDER mode using VDEV set param.
Change-Id: Idd4142e13061cd1af992bda88d0a0b81edc42fef
CRs-Fixed: 2574050
The current function doesn't handle "hw_mode" parameter.
And if band is specified the function needs to find the
correct "phy cap" in mac_phy_cap list.
The "supported_bands" can be a bit mask of
(WLAN_2G_CAPABILITY | WLAN_5G_CAPABILITY), use "&" to find
the phy cap of requested band.
Remove unused API wma_get_phyid_for_given_band.
Change-Id: I4b120d681b820e2a6e2b82f33d67fbcf6136af09
CRs-Fixed: 2571400
Roaming to new AP is depends on the periodic scan which occurs every
10sec in fw. Due to the default value of sticky time (btm_sticky_time)
to BTM AP is 5 min, periodic roaming scan gets disabled in fw till
sticky timer expiry. So FW won’t trigger a periodic scan for 5 min,
in case of roaming to new AP by BTM.
In case if STA roams to new AP by BTM and Disassociation Timer
expires before Stick time, DUT is not able to roam to a candidate
AP till Stick time expiry.
In order to allow roaming just after disassociation timer expiry,
Make Stick time value to zero by default.
Change-Id: I0de09ec7134d543a9c934a03941bcdb57b983dc9
CRs-Fixed: 2566842
Currently the driver uses STR_EDCA_ANI_ACBK_LOCAL as the length
for all the EDCA_LOCAL string cfg items.
Use the corresponding string length for EDCA_LOCAL string.
Change-Id: Ia6fd19b90c3d6c2c6e7a12e9f44389db2bf160f8
CRs-Fixed: 2569514
Send vdev create to firmware when the mlme vdev create handler
is invoked as part of the vdev object create.
Change-Id: Ibba02f6b5885d7b3a62529ef51768f520395513e
CRs-Fixed: 2555943
Presently as part of the vdev creation the self peer for the vdev
is created in the object manager and in the firmware. The self
peer creation in the object manager needs the vdev to be in the
created state. As part of new changes to send the vdev create to
firmware as part of the vdev creation notification there will be
failure in creating in the self peer.
Hence, drive the self peer creation from the SME layer which will
create the vdev.
Change-Id: I0875f4ec5bd96438c0f21056e1d6920d3be2a177
CRs-Fixed: 2555868
As part of Ie9ffc701d93ed1c050375dd56151b7a0da69cdce the STA mode
channel change was added in disconnected state for spectral scan
test at CV2X platform.
Now with iwpriv wlan0 setMonChan on STA mode, a monitor mode
pe_session is created in PE/LIM which take ref count with
WLAN_LEGACY_MAC_ID. As the interface is STA type this session
is not deleted when vdev is deleted. This lead to vdev ref leak.
This code is broken and is no longer in use and cause vdev
ref leak when executed. Thus revert
Ie9ffc701d93ed1c050375dd56151b7a0da69cdce.
Also move the lim session create to hdd_set_mon_rx_cb during
vdev create, as it is deleted during vdev delete.
Change-Id: Ib60aa2bd2746a8cd17f20efa7506c18784a42630
CRs-Fixed: 2557160
Move to the common psoc object and retrieve the cfg ini
information from the legacy implementation.
Change-Id: I38147c748796550f2adede44b681559a4f329fbf
CRs-Fixed: 2547536
Presently upon interface up a message is posted to the scheduler
to create the vdev, which sends the vdev create to the firmware,
for the vdev create there is no response from the firmware host
internally posts a fake message internally for the vdev create
response.
Dont post the vdev create to the scheduler thread but directly
send the vdev create to the firmware in the caller context.
Change-Id: Iafb186b13d948e421d152c3142cb8614fdbbffa6
CRs-Fixed: 2549530
Add action_oui ini gActionOUIDisableAggressiveEDCA to identify peers for
which aggressive EDCA configuration causes some IOT issues.
Change-Id: Ifea0c224cef2378727c9f78d8b571ea9c57bb662
CRs-Fixed: 2507191
Normalize the weights of the frequencies for ACS scan
if the user has changed them in the ini.
This is done as legacy devices wont be able to scan
the newly added 6ghz frequencies, and thus wont
be able to associate with the SAP if it starts
on 6ghz channels.
Change-Id: I2dd2f706c248f5339bde06963540d0874d08b847
CRs-Fixed: 2543007
Currently in hdd_adapter, the variable sta_info is an array of
hdd_station_info structured indexed by the sta_id. As sta_id is no
longer used this array based implementation becomes unnecessary.
Move the sta_info implementation to a hash table implementation.
Change-Id: I7d6fe04b7e0ab22615d431de9a10a4ad38ed65ba
CRs-Fixed: 2514280
Based on the ini "ignore_fw_reg_offload_ind" ignore regulatory
offload indicatin from fw.
Change-Id: I6e20f2100eeac8e93baa5c5d3f3d1c8b33356aed
CRs-Fixed: 2532989
CFG_VENDOR_ROAM_SCORE_ALGORITHM is added to specify the
preferred roam score algorithm.
With value 1, the new V2 roam score algorithm will be used.
With this roam score Algorithm, AP score will be calculated
based on below equation:
AP Score = (RSSIfactor * rssiweight(0.65)) +
(CUfactor * cuweight(0.35))
This algorithm value will be sent to firmware over the
WMI_AP_PROFILE command.
Change-Id: I5e7857108a9623fdf3e698cb842dbc22c21f61a1
CRs-Fixed: 2513571
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As a part of above requirement frequency attribute is added to the
struct sSirMacChanInfo, in driver some APIs directly copies this
structure info considering as every member of the structure as uint8_t,
as frequency is uint32_t this breaks above asumption and results into
corrupt info and gives undefined behaviour.
To address above issue, use the structure members individually and
give the information by member-by-member copy.
Change-Id: Ied6ad30d8a0800211f99371969ddd192ff40545c
CRs-Fixed: 2537975
Set chainmask for 2x2 dbs capable device if enable2x2,
AS, and diversity are disabled.
Change-Id: I3ec8da95b868e79af1f44fdba63b2ee57e4365fa
CRs-Fixed: 2528035
Enable configurable dfs_pri_multiplier. The ETSI typ2 type3 radar
detection ratio is lower than expected(>80%) while channel loading is
high(>30%). The host improvement for this are:
1. Add configurable dfs_pri_multiplier, controlled by
DFS_PRI_MULTIPLIER. Default value 2, min 1, max 10.
2. Lower adrastea ETSI type 2/3/4 radar filter rssi_threshold,
controlled by DFS_OVERRIDE_RF_THRESHOLD, dfs log shows that
QCS405 target report RSSI range [18, 45] while radar power
is 3 dbm. By using default rssi_threshold 24 will reject
many radar pulses, which leads to low detection ratio.
3. Calculate deltapri for each searchpri based on dfs_pri_multiplier
in dfs_count_the_other_delay_elements(), check deltapri
between [1, dfs_pri_multiplier] * refpri and searchpri, if
the primargin is desired, mark it as matched pulse.
4. Pick lowpri as refpri for the radar filter with
rf_ignore_pri_window equals to 0 while DFS_PRI_MULTIPLIER is
enabled. Observed original findref logic has some problems
which selects refpri is bigger than lowpri, which leads to
the lowpri pulses pri_match are set to 0, and in this case,
radar was not detected. Example for the issue, assume
rf->rf_pulseid 34 (ETSI type 2) has 7 pulses with pri:
1489, 2978, 2978, 2978, 1489, 2978, 1489 us in this case,
highscore is 4 (2978), scoreindex is 5, refpri is 2978, which
leads to: index 0, 4, 6 pulses with pri_match 0 in
dfs_count_the_other_delay_elements(). The fix is to select
lowpri as refpri(1489 in this case).
Change-Id: I1f3ca3298c9ab1f1e2651ad6b4a0a4810f83f8a1
CRs-Fixed: 2522506
The max value of gReportMaxLinkSpeed should be
CFG_STATS_LINK_SPEED_REPORT_MAX_SCALED.
Set the max value of gReportMaxLinkSpeed to
CFG_STATS_LINK_SPEED_REPORT_MAX_SCALED, otherwise
gReportMaxLinkSpeed does not work.
Change-Id: I164de224a4f4bfdd2dea55fe0a943fc4884326ff
CRs-Fixed: 2532054
User might modify the roam control config params through
multiple commands as part of roam control config enable.
Currently, only the params which are modified as part of
SUBCMD_CONTROL_SET command are restored. Restore all of the roam
control config params from the default ini values when the
control config is disabled i.e when the CLEAR_ALL is received.
Change-Id: I59ebc2e3018b01889ffb2bcd19b72d6d20fd0517
CRs-Fixed: 2517854
Currently, roam delta is updated to global mac ctx when it's
updated through DRIVER command. But the update should
happen only to the neighbor roam info of the corresponding vdev.
Retrieval also should happen based on vdev.
Change-Id: I355b9db2e142d4205088627672c3fb27c32d7fbd
CRs-Fixed: 2530333
The add_bss_req struct is used while handling add bss resp,
and is stored in vdev priv mlme.
The resp path require the info which can be filled from vdev resp
and thus no need to store the add_bss_req. From response fill and
use the add_bss_resp in add bss response handling path
Change-Id: I7ec1189c7d399e181f451a442a2578964eb4e47d
CRs-Fixed: 2529289
Add mlme APIs and structures to set and get roam
state, supplicant roam disabled flag and rso control
bitmap.
Change-Id: Ic97da49035462afffd9c86c1d9f9af08515e6747
CRs-Fixed: 2520824
To ensure the total weigtage of various factors doesn't exceed
100, there is a check in mlme_init_scoring_cfg(). If the total
weightage for roam score exceeds 100, the default values are
pushed for the weight configs.
In this computation, the enable/disable value is also added,
which results in configuration only upto 99%. Fix this weight
configuration and remove the enable flag value addition to the
total weight.
Change-Id: I15cf70428b2e8afa2203299dae98c287e5e2222d
CRs-Fixed: 2527361
Modify roaming enhancements specific ini default value to work
adaptive 11r and roaming enhancements feature.
Change-Id: I58efd5d8cc50ca1a2b9252c9aad8484cda58ae25
CRs-Fixed: 2521810
Cache the PMF capability of peer in peer_mlme_priv_obj while
adding bss for both station and AP modes. Process the mgmt frames
received from the peer as rmf frames only if the peer is of PMF
capable.
Move mlme_peer_object creation and deletion out of the define
CRYPTO_SET_KEY_CONVERGED to make it generic.
Remove the check where WEP bit is validated and modified based on
PMF capability of the peer. This is already taken care while
setting WEP bit in lim.
Change-Id: I0c93bb25db6a866e4c1793c9ba4c60773c0f019d
CRs-Fixed: 2520249
As a part of vdev convergence, legacy vdev code for vdev delete/stop/
down is removed. WMA timer for vdev manager operations are deleted,
now target_if takes care of it.
Structure del_bss_params is no more used to store bss delete request
params, hence struct del_bss_params is cleaned up from legacy code.
Change-Id: I487d2683908b705176ff8064dd3ce7cd49a3ce47
CRs-Fixed: 2517880
Add support to advertise the VHT MCS 10&11 support using vendor
specific IE to enable the MCS 10 and 11 support in VHT mode.
Change-Id: I2d197dcce20ab4aec617ca8a7f4a54b438fae635
CRs-Fixed: 2465662
