Propagation qcacld-2.0 to qcacld-3.0
while processing ft pre auth response, if memory allocation fails
then host is not setting psavedFTPreAuthRsp to null. Later sme is
freeing same memory as freeing pMsg->bodyptr. Hence on next
disconnect, sme_FtReset try to free psavedFTPreAuthRsp which is
already free.
As a part of this fix, host ensure to set psavedFTPreAuthRsp
Null in all cases.
Change-Id: I144786cd4206bf273d2ffa63889af109cd2744dd
CRs-Fixed: 916416
qcacld-2.0 to qcacld-3.0 propagation.
Implement:
1. Send & receive logic of ECSA action frame from P2P-CLI/GO
2. Trigger channel change on P2P GO side once ECSA action frame
is received by,
i) Adding CSA & ESCA IE in beacon template and updating
FW to send it out
ii) Notifying supplicant of channel change for P2P GO.
This change include UMAC changes.
CRs-fixed: 895240
Change-Id: Ie6c9154fb44ec75c699e37aaba660c637869c099
This is qcacld-2.0 to qcacld-3.0 propagation
Currently dwell time for PNO scan is passed as 0 to FW irrespective of
values set in config.ini. This patch allows active/passive dwell time
for PNO scan to be controlled by config.ini param.
Change-Id: I5562ed7e176af04ac8f38aa5af97257b9244cdc1
CRs-Fixed: 922054
This is qcacld-2.0 to qcacld-3.0 propagation
HDD directly calls in to MAC layer function with mac context as one
of the parameters which is a software layering violation.
Fix the issue by introducing a SME api which accepts hal handle as
one of the parameters instead of mac context and call the SME function
from HDD, which calls the MAC api with correct function parameters.
Change-Id: Iaac4ad7b67b0cb0f7b8b0d08e32904833afad707
CRs-Fixed: 913015
Reset the global saved scan command to avoid double free.
In sme_process_set_hw_mode_resp(), after freeing the local
saved_cmd pointer, the global mac->sme.saved_scan_cmd is
not reset to NULL. This ends up in double free in
csr_scan_complete()->csr_handle_nxt_cmd() where we are
still holding a stale pointer.
CRs-Fixed: 941130
Change-Id: Ibb93b8d8e601936c7996518f21646e2c140cbd20
For P2P GO + GO concurrency cases, the second P2P GO interface failed
to startup due to the incorrect checkings in the driver code for GO
interface. This fixes the condition checking logic.
Change-Id: I1a8a1b3dd4eed9dd8c824241d7b1759751e53a18
CRs-fixed: 938850
qcacld-2.0 to qcacld-3.0 propagation
when EXIT_BMPS is pending in activeList, it causes crash
with excess logging for RoamPending list. In this scenario
gTraceTbl has lost SME details due to other MTRACE commands.
Because of which, the issue is not rootcaused.
Add below changes to rootcause if the issue appears again:
1. print only first 5 commands from roamPendingList
2. Bug_on if the commandlist is full
3. Add MTRACE for PMC commands
CRs-Fixed: 833261
Change-Id: Id5bb399c4a8c8e84ddfa121a66881e3ecb901b05
qcacld-2.0 to qcacld-3.0 propagation
Add support to configure RM enabled capbility information element
through INI.
Using the introduced INI config option(rm_capability), we can set
or unset any bit in the IE. Default value for the config parameter
is set based on rrmInitialize routine.
Change-Id: Ia2a4352760db77ab71dad4757eb603d7539ffefa
CRs-Fixed: 918667
In case of LFR3.0, report the critical roaming events
such as receiving the roam synch indication from firmware,
sending the roam synch complete to the firmware, sending
Hand Over failure event to the firmware to the DIAG modules
for better debug capabilities.
CRs-Fixed: 938002
Change-Id: Icfb4972d59dc3b734ed5af37d70834fea470d741
Fix compilation issue when ROAM_OFFLOAD is not enabled. There are
issues with ROAM_OFFLOAD feature conditional compilation.
Change-Id: I068245885ab9f054b4c03307a9ecc0066bc88ebe
CRs-fixed: 784982
This commit will fix the incorrect pmf config param for STA DUT
in-case of LFR2/3 roaming scenario.
Change-Id: Ic0d6d4632cfeaa0589b435a6710f3c2380cf5883
CRs-Fixed: 935947
Fix layering violation in hdd_update_tgt_services by not accessing
pMac structure directly from HDD.
New SME API - sme_update_tgt_services() introducted to configure the
parameters in pMAC structure.
Change-Id: I7310e51001c5e17ed63730d7a86445548aa3d246
CRs-Fixed: 915267
Avoid waiting for SME response messages while holding the SME global
lock. Currently a wait for 500ms happens in cds_handle_conc_multiport
after the holding the SME global lock. Because of this, the set hw mode
response posted by LIM is not processed by SME as SME would be waiting
for the lock.
Change-Id: Ib7890cb7124f5879316f46b1bf9f0ad3fb225665
CRs-Fixed: 939026
cds_get_bin.h and cds_get_bin.c were derived from qcacld-2.0
vos_get_bin.h and vos_get_bin.c. These files got their names
since at one time they housed the wrappers used to retrieve
binary files nv.bin, cfg.dat, and firmware. But over time the
functionality to actually retrieve binary files (get_bin) has
been removed, and almost all that is left is concurrency
management functions. So, moving the .[ch] functionality to
the right files.
CRs-Fixed: 932777
Change-Id: I4a26c304cc6b6224d0839c365e4006fd32270961
Issue the connect command immediately when the system is already
in the required hw mode. Currently the connect command is issued
immediately only when the concurrent connection update succeeds,
i.e., only when a set hw mode succeeds. But, when the driver is
already in the required hw mode, the return value would not be
success and the connect command is not getting issued immediately.
Fixed this by checking the return value which indicates that the
driver is already in the required hw mode, and issuing the
connect command immediately.
Change-Id: I1ef2adf4d92953f47d36bdae41a9d7d8d559a203
CRs-Fixed: 936268
qcacld-2.0 to qcacld-3.0 propagation
The wait for key timer value in the driver should
be greater than that of supplicant.
Hence increasing it to 15 seconds.
CRs-Fixed: 919403
Change-Id: I5d6e8d445ab9dcef73b923595f41564e0a6e3c6e
qcacld-2.0 to qcacld-3.0 propagation
1) Enable the feature only when connected to 2.4 GHz AP.
2) Modify the default values to reduce the scans and not impact power
CRs-Fixed: 817919
Change-Id: Idaff886cec558a06cf9341e47a8ce17b348ad72b
qcacld-2.0 to qcacld-3.0 propagation
Currently we are calling memory allocation function to allocate memory for
FT ies even though FT ies length is 0.
Due to above behavior we are seeing unnecessary memory allocation failure
error prints.
Change made to check for FT ies length before calling memory allocation
function.
Change-Id: I3f9ddee1d66f51088526f6d370c83697178be925
CRs-Fixed: 930118
Ensure that concurrency rules are validated before initiating
a P2P CLI connection.
Change-Id: I6ee8d03f2bde9b419391551c0ca988b3672eb089
CRs-Fixed: 935783
Early stop scan is a feature for roaming to stop the scans at
an early stage as soon as we find a better AP to roam. This
would make the roaming happen quickly.
Apart from sending the configuration items, the host also
has to send down the channel list in a sorted order
to optimize the scans and meet the requirement of this
feature.
This feature is currently applicable only to roaming
scans. However the sorted order of scan list will be
the same used by all the scans.
CRs-Fixed: 932431
Change-Id: I9c7300e4922cb0d517c248bcf60f681a5872a315
Reduce the number of channels to scan in PNO mode
based on the initial scan memory and the movement
of the client STA using Tanimoto distance
CRs-Fixed: 932355
Change-Id: I1b5448af801fb37324b77cd13c6009f1d859dd61
qcacld-3.0: Initial snapshot of ihelium wlan driver
to match code-scanned SU Release 5.0.0.139. This is
open-source version of wlan for next Android release.
Change-Id: Icf598ca97da74f84bea607e4e902d1889806f507
