Commit Graph

275 Commits

Author SHA1 Message Date
Andres Salomon
3ef0e1f8ca x86: olpc: add One Laptop Per Child architecture support
This adds support for OLPC XO hardware.  Open Firmware on XOs don't contain
the VSA, so it is necessary to emulate the PCI BARs in the kernel.  This also
adds functionality for running EC commands, and a CONFIG_OLPC.

A number of OLPC drivers depend upon CONFIG_OLPC.

olpc_ec_timeout is a hack to work around Embedded Controller bugs.

[akpm@linux-foundation.org: build fix]
[akpm@linux-foundation.org: geode_has_vsa build fix]
[akpm@linux-foundation.org: olpc_register_battery_callback doesn't exist]
Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <ak@suse.de>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:06:07 -07:00
Bartlomiej Zolnierkiewicz
ef87f8d096 ide: remove obsoleted "idex=" kernel parameters
* Remove obsoleted "idex=" kernel parameters.

* Make probe_* and cmd640_vlb variables static.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 15:38:24 +02:00
Linus Torvalds
bda0c0afa7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (42 commits)
  PCI: Change PCI subsystem MAINTAINER
  PCI: pci-iommu-iotlb-flushing-speedup
  PCI: pci_setup_bridge() mustn't be __devinit
  PCI: pci_bus_size_cardbus() mustn't be __devinit
  PCI: pci_scan_device() mustn't be __devinit
  PCI: pci_alloc_child_bus() mustn't be __devinit
  PCI: replace remaining __FUNCTION__ occurrences
  PCI: Hotplug: fakephp: Return success, not ENODEV, when bus rescan is triggered
  PCI: Hotplug: Fix leaks in IBM Hot Plug Controller Driver - ibmphp_init_devno()
  PCI: clean up resource alignment management
  PCI: aerdrv_acpi.c: remove unneeded NULL check
  PCI: Update VIA CX700 quirk
  PCI: Expose PCI VPD through sysfs
  PCI: iommu: iotlb flushing
  PCI: simplify quirk debug output
  PCI: iova RB tree setup tweak
  PCI: parisc: use generic pci_enable_resources()
  PCI: ppc: use generic pci_enable_resources()
  PCI: powerpc: use generic pci_enable_resources()
  PCI: ia64: use generic pci_enable_resources()
  ...
2008-04-21 15:58:35 -07:00
Linus Torvalds
9a64388d83 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (202 commits)
  [POWERPC] Fix compile breakage for 64-bit UP configs
  [POWERPC] Define copy_siginfo_from_user32
  [POWERPC] Add compat handler for PTRACE_GETSIGINFO
  [POWERPC] i2c: Fix build breakage introduced by OF helpers
  [POWERPC] Optimize fls64() on 64-bit processors
  [POWERPC] irqtrace support for 64-bit powerpc
  [POWERPC] Stacktrace support for lockdep
  [POWERPC] Move stackframe definitions to common header
  [POWERPC] Fix device-tree locking vs. interrupts
  [POWERPC] Make pci_bus_to_host()'s struct pci_bus * argument const
  [POWERPC] Remove unused __max_memory variable
  [POWERPC] Simplify xics direct/lpar irq_host setup
  [POWERPC] Use pseries_setup_i8259_cascade() in pseries_mpic_init_IRQ()
  [POWERPC] Turn xics_setup_8259_cascade() into a generic pseries_setup_i8259_cascade()
  [POWERPC] Move xics_setup_8259_cascade() into platforms/pseries/setup.c
  [POWERPC] Use asm-generic/bitops/find.h in bitops.h
  [POWERPC] 83xx: mpc8315 - fix USB UTMI Host setup
  [POWERPC] 85xx: Fix the size of qe muram for MPC8568E
  [POWERPC] 86xx: mpc86xx_hpcn - Temporarily accept old dts node identifier.
  [POWERPC] 86xx: mark functions static, other minor cleanups
  ...
2008-04-21 15:50:49 -07:00
mark gross
5e0d2a6fc0 PCI: iommu: iotlb flushing
This patch is for batching up the flushing of the IOTLB for the DMAR
implementation found in the Intel VT-d hardware.  It works by building a list
of to be flushed IOTLB entries and a bitmap list of which DMAR engine they are
from.

After either a high water mark (250 accessible via debugfs) or 10ms the list
of iova's will be reclaimed and the DMAR engines associated are IOTLB-flushed.

This approach recovers 15 to 20% of the performance lost when using the IOMMU
for my netperf udp stream benchmark with small packets.  It can be disabled
with a kernel boot parameter "intel_iommu=strict".

Its use does weaken the IOMMU protections a bit.

Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:47:07 -07:00
Greg Kroah-Hartman
1ba6ab11d8 PCI: remove initial bios sort of PCI devices on x86
We currently keep 2 lists of PCI devices in the system, one in the
driver core, and one all on its own.  This second list is sorted at boot
time, in "BIOS" order, to try to remain compatible with older kernels
(2.2 and earlier days).  There was also a "nosort" option to turn this
sorting off, to remain compatible with even older kernel versions, but
that just ends up being what we have been doing from 2.5 days...

Unfortunately, the second list of devices is not really ever used to 
determine the probing order of PCI devices or drivers[1].  That is done
using the driver core list instead.  This change happened back in the
early 2.5 days.

Relying on BIOS ording for the binding of drivers to specific device
names is problematic for many reasons, and userspace tools like udev
exist to properly name devices in a persistant manner if that is needed,
no reliance on the BIOS is needed.

Matt Domsch and others at Dell noticed this back in 2006, and added a
boot option to sort the PCI device lists (both of them) in a
breadth-first manner to help remain compatible with the 2.4 order, if
needed for any reason.  This option is not going away, as some systems
rely on them.

This patch removes the sorting of the internal PCI device list in "BIOS"
mode, as it's not needed at all anymore, and hasn't for many years.
I've also removed the PCI flags for this from some other arches that for
some reason defined them, but never used them.

This should not change the ordering of any drivers or device probing.

[1] The old-style pci_get_device and pci_find_device() still used this
sorting order, but there are very few drivers that use these functions,
as they are deprecated for use in this manner.  If for some reason, a
driver rely on the order and uses these functions, the breadth-first
boot option will resolve any problem.

Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20 21:46:58 -07:00
Jiri Slaby
f5a1b191b3 x86: fix exec mappings comments
- noexec32 is on by default for years already
- add noexec32 to kernel-parameters and fix noexec typo in there

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-19 19:19:55 +02:00
Ahmed S. Darwish
076c54c5bc Security: Introduce security= boot parameter
Add the security= boot parameter. This is done to avoid LSM
registration clashes in case of more than one bult-in module.

User can choose a security module to enable at boot. If no
security= boot parameter is specified, only the first LSM
asking for registration will be loaded. An invalid security
module name will be treated as if no module has been chosen.

LSM modules must check now if they are allowed to register
by calling security_module_enable(ops) first. Modify SELinux
and SMACK to do so.

Do not let SMACK register smackfs if it was not chosen on
boot. Smackfs assumes that smack hooks are registered and
the initial task security setup (swapper->security) is done.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: James Morris <jmorris@namei.org>
2008-04-19 10:00:51 +10:00
Linus Torvalds
4786b4ee22 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (27 commits)
  [IA64] kdump: Add crash_save_vmcoreinfo for INIT
  [IA64] Fix NUMA configuration issue
  [IA64] Itanium Spec updates
  [IA64] Untangle sync_icache_dcache() page size determination
  [IA64] arch/ia64/kernel/: use time_* macros
  [IA64] remove redundant display of free swap space in show_mem()
  [IA64] make IOMMU respect the segment boundary limits
  [IA64] kprobes: kprobe-booster for ia64
  [IA64] fix getpid and set_tid_address fast system calls for pid namespaces
  [IA64] Replace explicit jiffies tests with time_* macros.
  [IA64] use goto to jump out do/while_each_thread
  [IA64] Fix unlock ordering in smp_callin
  [IA64] pgd_offset() constfication.
  [IA64] kdump: crash.c coding style fix
  [IA64] kdump: add kdump_on_fatal_mca
  [IA64] Minimize per_cpu reservations.
  [IA64] Correct pernodesize calculation.
  [IA64] Kernel parameter for max number of concurrent global TLB purges
  [IA64] Multiple outstanding ptc.g instruction support
  [IA64] Implement smp_call_function_mask for ia64
  ...
2008-04-18 09:44:55 -07:00
Linus Torvalds
188da98800 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (58 commits)
  ide: remove ide_init_default_irq() macro
  ide: move default IDE ports setup to ide_generic host driver
  ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
  ide: remove needless hwif->irq check from ide_hwif_configure()
  ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers
  ide: limit legacy VLB host drivers to alpha, x86 and mips
  cmd640: init hwif->{io_ports,irq} explicitly
  cmd640: cleanup setup_device_ptrs()
  ide: add ide-4drives host driver (take 3)
  ide: remove ppc ifdef from init_ide_data()
  ide: remove ide_default_io_ctl() macro
  ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT
  ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS (take 2)
  ppc/pmac: remove no longer needed IDE quirk
  ppc: don't include <linux/ide.h>
  ppc: remove ppc_ide_md
  ppc/pplus: remove ppc_ide_md.ide_init_hwif hook
  ppc/sandpoint: remove ppc_ide_md hooks
  ppc/lopec: remove ppc_ide_md hooks
  ppc/mpc8xx: remove ppc_ide_md hooks
  ...
2008-04-18 08:39:24 -07:00
Linus Torvalds
9732b61123 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-kgdb:
  kgdb: always use icache flush for sw breakpoints
  kgdb: fix SMP NMI kgdb_handle_exception exit race
  kgdb: documentation fixes
  kgdb: allow static kgdbts boot configuration
  kgdb: add documentation
  kgdb: Kconfig fix
  kgdb: add kgdb internal test suite
  kgdb: fix several kgdb regressions
  kgdb: kgdboc pl011 I/O module
  kgdb: fix optional arch functions and probe_kernel_*
  kgdb: add x86 HW breakpoints
  kgdb: print breakpoint removed on exception
  kgdb: clocksource watchdog
  kgdb: fix NMI hangs
  kgdb: fix kgdboc dynamic module configuration
  kgdb: document parameters
  x86: kgdb support
  consoles: polling support, kgdboc
  kgdb: core
  uaccess: add probe_kernel_write()
2008-04-18 08:37:01 -07:00
Bartlomiej Zolnierkiewicz
f01674e459 ide: remove obsoleted "idex=noprobe" kernel parameter (take 2)
* Remove obsoleted "idex=noprobe" kernel parameter.

* Remove no longer needed hwif->noprobe quirk from ide_hwif_configure()
  and hwif->noprobe checking from cmd640.c.

v2:
* "ide?=noprobe" -> "ide?=ata66" in Documentation/kernel-parameters.txt.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:35 +02:00
Greg Kroah-Hartman
a594eeb1a1 IDE: remove ide=reverse IDE core
This option is obsolete and can be removed safely.

It allows us to remove the pci_get_device_reverse() function from the
PCI core.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-18 00:46:20 +02:00
Jason Wessel
6cdf6e06d7 kgdb: document parameters
document the kgdboc module/boot parameter.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 20:05:38 +02:00
Tony Luck
f4df39cbdd Pull nptcg into release branch
Conflicts:

	arch/ia64/mm/tlb.c
2008-04-17 10:13:57 -07:00
Yinghai Lu
c64df70793 x86: memtest bootparam
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:41:21 +02:00
Pavel Machek
b552da8740 x86 iommu: add more documentation
Fix coding style in pci-dma_64.c and add stubs for documentation. I
hope someone fills the rest, I understand maybe off and soft...

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-17 17:40:59 +02:00
Paul Mackerras
ac7c5353b1 Merge branch 'linux-2.6' 2008-04-14 21:11:02 +10:00
Linus Torvalds
14897e35fd Merge branch 'docs' of git://git.lwn.net/linux-2.6
* 'docs' of git://git.lwn.net/linux-2.6:
  Add additional examples in Documentation/spinlocks.txt
  Move sched-rt-group.txt to scheduler/
  Documentation: move rpc-cache.txt to filesystems/
  Documentation: move nfsroot.txt to filesystems/
  Spell out behavior of atomic_dec_and_lock() in kerneldoc
  Fix a typo in highres.txt
  Fixes to the seq_file document
  Fill out information on patch tags in SubmittingPatches
  Add the seq_file documentation
2008-04-11 13:24:16 -07:00
J. Bruce Fields
6ded55da6b Documentation: move nfsroot.txt to filesystems/
Documentation/ is a little large, and filesystems/ seems an obvious
place for this file.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2008-04-11 13:18:01 -06:00
Paul Menage
8bab8dded6 cgroups: add cgroup support for enabling controllers at boot time
The effects of cgroup_disable=foo are:

- foo isn't auto-mounted if you mount all cgroups in a single hierarchy
- foo isn't visible as an individually mountable subsystem

As a result there will only ever be one call to foo->create(), at init time;
all processes will stay in this group, and the group will never be mounted on
a visible hierarchy.  Any additional effects (e.g.  not allocating metadata)
are up to the foo subsystem.

This doesn't handle early_init subsystems (their "disabled" bit isn't set be,
but it could easily be extended to do so if any of the early_init systems
wanted it - I think it would just involve some nastier parameter processing
since it would occur before the command-line argument parser had been run.

Hugh said:

  Ballpark figures, I'm trying to get this question out rather than
  processing the exact numbers: CONFIG_CGROUP_MEM_RES_CTLR adds 15% overhead
  to the affected paths, booting with cgroup_disable=memory cuts that back to
  1% overhead (due to slightly bigger struct page).

  I'm no expert on distros, they may have no interest whatever in
  CONFIG_CGROUP_MEM_RES_CTLR=y; and the rest of us can easily build with or
  without it, or apply the cgroup_disable=memory patches.

Unix bench's execl test result on x86_64 was

== just after boot without mounting any cgroup fs.==
mem_cgorup=off : Execl Throughput       43.0     3150.1      732.6
mem_cgroup=on  : Execl Throughput       43.0     2932.6      682.0
==

[lizf@cn.fujitsu.com: fix boot option parsing]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Paul Menage <menage@google.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Sudhir Kumar <skumar@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04 14:46:26 -07:00
Fenghua Yu
a6c75b86ce [IA64] Kernel parameter for max number of concurrent global TLB purges
The patch defines kernel parameter "nptcg=". The parameter overrides max number
of concurrent global TLB purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-04-04 11:06:38 -07:00
Rafael J. Wysocki
7731ce63d9 ACPI PM: Restore the 2.6.24 suspend ordering
Some time ago it turned out that our suspend code ordering broke some
NVidia-based systems that hung if _PTS was executed with one of the PCI
devices, specifically a USB controller, in a low power state.

Then, it was noticed that the suspend code ordering was not compliant
with ACPI 1.0, although it was compliant with ACPI 2.0 (and later), and
it was argued that the code had to be changed for that reason (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

So we did, but evidently we did wrong, because it's now turning out that
some systems have been broken by this change. Refs:
	http://bugzilla.kernel.org/show_bug.cgi?id=10340
	https://bugzilla.novell.com/show_bug.cgi?id=374217#c16

[ I said at that time that something like this might happend, but the
  majority of people involved thought that it was improbable due to the
  necessity to preserve the compliance of hardware with ACPI 1.0. ]

This actually is a quite serious regression from 2.6.24.

Moreover, the ACPI 1.0 ordering of suspend code introduced another issue
that I have only noticed recently.  Namely, if the suspend of one of
devices fails, the already suspended devices will be resumed without
executing _WAK before, which leads to problems on some systems (for
example, in such situations thermal management is broken on my HP
nx6325).  Consequently, it also breaks suspend debugging on the affected
systems.

Note also, that the requirement to execute _PTS before suspending
devices does not really make sense, because the device in question may
be put into a low power state at run time for a reason unrelated to a
system-wide suspend.

For the reasons outlined above, the change of the suspend ordering
should be reverted, which is done by the patch below.

[ Felix Möller: "I am the reporter from the original Novell Bug:

	https://bugzilla.novell.com/show_bug.cgi?id=374217

  I just tried current git head (two hours ago) with the patch (the one
  from the beginning of this thread) from Rafael and without it.  With
  the patch my MacBook does suspend without it does not." ]

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Felix Möller <felix@derklecks.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-01 11:21:08 -07:00
Robert Brose
a78bfbfcfa [POWERPC] Add kernel parameter to set l3cr for MPC745x
Old-world powermacs don't set L2CR or L3CR on processor upgrade cards.
This simple patch allows the setting of L3CR via a kernel parameter
(like the existing kernel parameter to set L2CR).

Signed-off-by: Robert Brose <bob@qbjnet.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-01 20:43:09 +11:00
Pavel Machek
1312848e92 kernel-parameters.txt: document memmap option better
Provide example for memmap exclude option (it is slightly strange and
non-trivial) and provide nice small HOWTO for people with bad memory.

Signed-off-by: Jan-Simon Moeller <dl9pf@gmx.de>
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-24 19:22:19 -07:00
Linus Torvalds
fb00f7629b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - fix forward/back buttons reversed on Acer 5520-5290
  Input: ALPS - put secondary device in proper place in sysfs
  Input: wacom - add support for Bamboo1, BambooFun, and Cintiq 12WX
  Input: document i8042.noloop
  Input: add keyboard notifier documentation
  Input: ads7846 - fix uninitialized var warning
  Input: i8042 - add SNI RM support
  Input: i8042 - add Lenovo 3000 N100 to nomux blacklist
  Input: i8042 - fix warning on non-x86 builds
  Input: cobalt_btns - assorted fixes
2008-03-18 07:46:19 -07:00
Linus Torvalds
9a9e0d6855 ACPI: Remove ACPI_CUSTOM_DSDT_INITRD option
This essentially reverts commit 71fc47a9ad
("ACPI: basic initramfs DSDT override support"), because the code simply
isn't ready.

It did ugly things to the init sequence to populate the rootfs image
early, but that just ended up showing other problems with the whole
approach.  The fact is, the VFS layer simply isn't initialized this
early, and the relevant ACPI code should either run much later, or this
shouldn't be done at all.

For 2.6.25, we'll just pick the latter option.  We can revisit this
concept later if necessary.

Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Tilman Schmidt <tilman@imap.cc>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Len Brown <len.brown@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Markus Gaugusch <dsdt@gaugusch.at>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-15 11:58:04 -07:00
Jiri Kosina
75d08c7893 Input: document i8042.noloop
Document 'noloop' kernel parameter of i8042 controller driver.
Pointed out in #10236.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2008-03-14 11:54:25 -04:00
Randy Dunlap
53471121a8 documentation: Move power-related files to Documentation/power/
Move 00-INDEX entries to power/00-INDEX (and add entry for
pm_qos_interface.txt).

Update references to moved filenames.

Fix some trailing whitespace.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-03-12 18:10:51 -04:00
Randy Dunlap
1c10e93828 ide: update references to Documentation/ide/ide.txt (v2)
Fix all references to Documentation/ide/ide.txt.
Add/update ide/00-INDEX file.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-03-07 21:53:50 +01:00
Tejun Heo
3326732570 libata: implement libata.force module parameter
This patch implements libata.force module parameter which can
selectively override ATA port, link and device configurations
including cable type, SATA PHY SPD limit, transfer mode and NCQ.

For example, you can say "use 1.5Gbps for all fan-out ports attached
to the second port but allow 3.0Gbps for the PMP device itself, oh,
the device attached to the third fan-out port chokes on NCQ and
shouldn't go over UDMA4" by the following.

 libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20 12:12:28 -05:00
Adrian Bunk
08cd93f9e1 remove mca-pentium
This patch removes the mca-pentium boot option that was a noop.

besides the source code cleanup factor, this saves some text as well:

   arch/x86/kernel/cpu/bugs.o:
      text    data     bss     dec     hex filename
       651      77       4     732     2dc bugs.o.before
       631      53       4     688     2b0 bugs.o.after

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-19 16:18:28 +01:00
Adrian Bunk
a36219ac93 The scheduled 'time' option removal
The scheduled removal of the 'time' option.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:36 -08:00
Len Brown
81e242d0ef Merge branches 'release' and 'dsdt-override' into release 2008-02-07 04:01:53 -05:00
Éric Piel
9cbc796028 ACPI: Add "acpi_no_initrd_override" kernel parameter
The acpi_no_initrd_override parameter permits to disable the load of an ACPI
table from the initramfs.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 04:00:24 -05:00
Pavel Machek
23b168d425 PM: documentation cleanups
Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07 01:27:17 -05:00
Denis Cheng
594765a731 ide-pci-generic: kill the unused ifdef/endif/MODULE code
with module_param macro, the __setup code can be killed now:
	const __setup("all-generic-ide", ide_generic_all_on);

and the module name "generic.ko" is not descriptive to its functionality,
can be changed in Makefile, the "ide-pci-generic.ko" is better.

the ide-pci-generic.all-generic-ide parameter also documented
in Documentation/kernel-parameters.txt

Signed-off-by: Denis Cheng <crquan@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-06 02:57:49 +01:00
Robert P. J. Day
3239c49cf1 Documentation: Remove references to dead "st0x" and "tmc8xx" parms.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:23:00 +02:00
Robert P. J. Day
24aaef8d7f Documentation: Update to refer to correct "rcupdate" module name
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:20:26 +02:00
Robert P. J. Day
2d27a96614 Documentation: "decnet=" should read "decnet.addr=".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 15:18:45 +02:00
Rafael J. Wysocki
60417f5976 ACPI suspend: Call _PTS before suspending devices
The ACPI 1.0 specification wants us to put devices into low power
states after executing the _PTS global control method, while ACPI
2.0 and later want us to do that in the reverse order.  The current
suspend code follows ACPI 2.0 in that respect which causes some
ACPI 1.0x systems to hang during suspend (ref.
http://bugzilla.kernel.org/show_bug.cgi?id=9528).

Make the suspend code execute _PTS before putting devices into low
power states (ie. in accordance with ACPI 1.0x) and provide a command
line option to override the default if need be.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-01 18:30:58 -05:00
Paul Mackerras
bd45ac0c5d Merge branch 'linux-2.6' 2008-01-31 11:25:51 +11:00
Willy Tarreau
e6c4dc6c36 x86: GEODE add the "mfgptfix" boot time option to fix MFGPT timers
The new "mfgptfix" boot command line option may be usd to fix MFGPT
timers on AMD Geode platforms when the BIOS has incorrectly applied
a workaround. TinyBIOS version 0.98 is known to be affected, 0.99
fixes the problem by letting the user disable the workaround.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:33 +01:00
Yinghai Lu
093af8d7f0 x86_32: trim memory by updating e820
when MTRRs are not covering the whole e820 table, we need to trim the
RAM and need to update e820.

reuse some code on 64-bit as well.

here need to add early_get_cap and use it in early_cpu_detect, and move
mtrr_bp_init early.

The code successfully trimmed the memory map on Justin's system:

from:

 [    0.000000]  BIOS-e820: 0000000100000000 - 000000022c000000 (usable)

to:

 [    0.000000]   modified: 0000000100000000 - 0000000228000000 (usable)
 [    0.000000]   modified: 0000000228000000 - 000000022c000000 (reserved)

According to Justin it makes quite a difference:

|  When I boot the box without any trimming it acts like a 286 or 386,
|  takes about 10 minutes to boot (using raptor disks).

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:32 +01:00
Andi Kleen
ac72e7888a x86: add generic clearcpuid=... option
Add a generic option to clear any cpuid bit. I added it because it was
very easy to add with the new generic cpuid disable bitmap and perhaps
it will be useful in the future.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:21 +01:00
Andi Kleen
191679fdfa x86: add noclflush option
To disable CLFLUSH usage, especially in change_page_attr().

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:21 +01:00
Jesse Barnes
99fc8d424b x86, 32-bit: trim memory not covered by wb mtrrs
On some machines, buggy BIOSes don't properly setup WB MTRRs to cover all
available RAM, meaning the last few megs (or even gigs) of memory will be
marked uncached.  Since Linux tends to allocate from high memory addresses
first, this causes the machine to be unusably slow as soon as the kernel
starts really using memory (i.e.  right around init time).

This patch works around the problem by scanning the MTRRs at boot and
figuring out whether the current end_pfn value (setup by early e820 code)
goes beyond the highest WB MTRR range, and if so, trimming it to match.  A
fairly obnoxious KERN_WARNING is printed too, letting the user know that
not all of their memory is available due to a likely BIOS bug.

Something similar could be done on i386 if needed, but the boot ordering
would be slightly different, since the MTRR code on i386 depends on the
boot_cpu_data structure being setup.

This patch fixes a bug in the last patch that caused the code to run on
non-Intel machines (AMD machines apparently don't need it and it's untested
on other non-Intel machines, so best keep it off).

Further enhancements and fixes from:

  Yinghai Lu <Yinghai.Lu@Sun.COM>
  Andi Kleen <ak@suse.de>

Signed-off-by: Jesse Barnes <jesse.barnes@intel.com>
Tested-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:18 +01:00
Yinghai Lu
aaf2304242 x86: disable the GART early, 64-bit
For K8 system: 4G RAM with memory hole remapping enabled, or more than
4G RAM installed.

when try to use kexec second kernel, and the first doesn't include
gart_shutdown. the second kernel could have different aper position than
the first kernel. and second kernel could use that hole as RAM that is
still used by GART set by the first kernel. esp. when try to kexec
2.6.24 with sparse mem enable from previous kernel (from RHEL 5 or SLES
10). the new kernel will use aper by GART (set by first kernel) for
vmemmap. and after new kernel setting one new GART. the position will be
real RAM. the _mapcount set is lost.

Bad page state in process 'swapper'
page:ffffe2000e600020 flags:0x0000000000000000 mapping:0000000000000000 mapcount:1 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Pid: 0, comm: swapper Not tainted 2.6.24-rc7-smp-gcdf71a10-dirty #13

Call Trace:
 [<ffffffff8026401f>] bad_page+0x63/0x8d
 [<ffffffff80264169>] __free_pages_ok+0x7c/0x2a5
 [<ffffffff80ba75d1>] free_all_bootmem_core+0xd0/0x198
 [<ffffffff80ba3a42>] numa_free_all_bootmem+0x3b/0x76
 [<ffffffff80ba3461>] mem_init+0x3b/0x152
 [<ffffffff80b959d3>] start_kernel+0x236/0x2c2
 [<ffffffff80b9511a>] _sinittext+0x11a/0x121

and
 [ffffe2000e600000-ffffe2000e7fffff] PMD ->ffff81001c200000 on node 0
phys addr is : 0x1c200000

RHEL 5.1 kernel -53 said:
PCI-DMA: aperture base @ 1c000000 size 65536 KB

new kernel said:
Mapping aperture over 65536 KB of RAM @ 3c000000

So could try to disable that GART if possible.

According to Ingo

> hm, i'm wondering, instead of modifying the GART, why dont we simply
> _detect_ whatever GART settings we have inherited, and propagate that
> into our e820 maps? I.e. if there's inconsistency, then punch that out
> from the memory maps and just dont use that memory.
>
> that way it would not matter whether the GART settings came from a [old
> or crashing] Linux kernel that has not called gart_iommu_shutdown(), or
> whether it's a BIOS that has set up an aperture hole inconsistent with
> the memory map it passed. (or the memory map we _think_ i tried to pass
> us)
>
> it would also be more robust to only read and do a memory map quirk
> based on that, than actively trying to change the GART so early in the
> bootup. Later on we have to re-enable the GART _anyway_ and have to
> punch a hole for it.
>
> and as a bonus, we would have shored up our defenses against crappy
> BIOSes as well.

add e820 modification for gart inconsistent setting.

gart_fix_e820=off could be used to disable e820 fix.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:09 +01:00
Arjan van de Ven
a25bd94964 x86: add the "print code before the trapping instruction" feature to 64 bit
The 32 bit x86 tree has a very useful feature that prints the Code: line
for the code even before the trapping instrution (and the start of the
trapping instruction is then denoted with a <>). Unfortunately, the 64 bit
x86 tree does not yet have this feature, making diagnosing backtraces harder
than needed.

This patch adds this feature in the same was as the 32 bit tree has
(including the same kernel boot parameter), and including a bugfix
to make the code use probe_kernel_address() rarther than a buggy (deadlocking)
__get_user.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:33:08 +01:00
Huang, Ying
8b2cb7a8f5 x86: 32-bit EFI runtime service support: fixes in sync with 64-bit support
support according to fixes of x86_64 support.

- Delete efi_rt_lock because it is used during system early boot,
  before SMP is initialized.

- Change local_flush_tlb() to __flush_tlb_all() to flush global page
  mapping.

- Clean up includes.

- Revise Kconfig description.

- Enable noefi kernel parameter on i386.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-01-30 13:32:11 +01:00