As part of PCIe power management for new WLAN devices, it requires
asserting WAKE register before accessing any MMIO registers outside
first 4K range. Add the APIs support in PLD for WLAN host driver.
Change-Id: I307cc6688fca58a52a6eaf3982d675c7a85a6965
CRs-fixed: 2326459
Upon driver reinitialize after a FW rejuvenate,
data packets are not going through IPA path.
Check for FW rejuvenate scenario during driver
recovery and send appropriate message to IPA
driver.
Change-Id: I8c1d7ba78227684cd5653a5927aa4d4c2ce5d354
Crs-Fixed: 2287293
If modem crashed during wlan driver unloading, icnss driver
will call driver uevent callback to set FW down status in
driver side when it receives BEFORE_SHUTDOWN notification.
If wlan driver is de-initialized just before the callback
is called, kernel will panic as driver's context is freed.
This can be avoid by not setting FW status in host driver.
Instead, icnss driver provides an API to host driver to
check FW status and host driver calls this API before any timeout
assert or accessing HW registers.
CRs-Fixed: 2161431
Change-Id: I8331367dd41dd0cedfa65c63f1bb3ffcb535e1c9
Address the following issue in the core/pld folder:
CHECK: 'bandwith' may be misspelled - perhaps 'bandwidth'?
Change-Id: Ic397c156ff7ba32cec590083098474af16569ea7
CRs-Fixed: 2241943
Target register is safe to access only after FW ack the wlan
enable request, which is done in hif_enable. Hence set FW ready
state after that.
Change-Id: Ieeb7dd3e1a2400c7b2568869ac27cf7f745c20d5
CRs-Fixed: 2167736
These APIs are used with legacy platform driver for PCIe bus based
targets which are no longer needed for new platform driver.
Change-Id: I6e01ea632e902f2c0a3a7cde07c85dfa835b84d3
CRs-fixed: 2134245
FW ready state guarantees the completion of 2nd stage power on
reset sequence of wcn3990 target.
Add fw ready uevent to update driver state, which is required
to check if target registers are accessible or not, while
recovery is in progress.
Change-Id: I78d56644d4d4ac3a0371be625a2debed8ac7cebf
CRs-Fixed: 2058451
Enable support to use SKB Buffers allocated during bootup for
low memory targets.
CRs-Fixed: 2106466
Change-Id: Ia55c38767804c5915b9d29d3c61bff236d12cacd
Skip FW memory dump in SSR case for HL SDIO solution.
HL SDIO uses the diag read API to read by 4 bytes,
which is too slow to meet SSR time requirement.
Change-Id: Iacde90ab0ec84f29f3744bf4497ec8fd8517600a
CRs-Fixed: 2071329
Use cnss_utils APIs to set/get wlan info as these APIs are platform
independent.
CRs-Fixed: 2071683
Change-Id: Ia35a648a1d4dff308b830bce3b4e9992de2a2834
If platform has a mechanism to initiate target assert, trigger
that interface to force assert target. Certain integrated platforms
(where WLAN runs on it's own PD) provides a mechanism to initiate PDR
from host. That interface can be triggered when WLAN host detect
timeout scenarios.
CRs-Fixed: 1110243
Change-Id: I6a9408f47ca4245380dbf4177363c3c461ff948d
Update uevent status to hdd, based on the uevent received
from the platform driver
Change-Id: I1ac0fa61efa8b7f4f9d5e4e6abfcf969dbc1c592
CRs-fixed: 2027958
1. The paths for driver to get ini and fw files
are incorrect for QCA SDIO chip on Dual-WiFi
platforms, with wrong prefix or no prefix.
Correct prefix for ini file, from '<mod_name>'
to '<chip_name>/'; add prefix '<chip_name>/'
for fw files.
2. For QCA9377, there is a special cnss API for getting
fw names, it's cnss_get_qca9377_fw_files().
Use the right cnss API to get fw files for QCA9377
Change-Id: Ia7616153b6823e9550703e649c7fc21ab306ca07
CRs-Fixed: 2008217
Add support for setting fw log mode for msm8998. Change the log mode
from bool type to tristate to support multiple log modes.
CRs-Fixed: 1115611
Change-Id: I6aef023d1e3cb1b68f1520f800af094f6f6decdb
Swith to new recovery APIs with dev instance and recovery reason.
As recovery could have different mode and be target specific.
Change-Id: I26a1a2a0d23a687a5babcaf4ba4e5c6e788fedac
Implement update_status driver callback, which will be called
when platform driver wants to update wlan driver status.
CRs-Fixed: 1111424
Change-Id: I0c4a20119e383d00e2dbd395159351572b956566
These version 2 shadow registers are filled by HIF and sent to firmware
through QMI for QCA6290 chipset.
Change-Id: I92edb4140f707a933dacbe982eb4da167841b501
CRs-fixed: 1107457
These PLD APIs can be called to get PCIe MSI related information
from platform driver.
Change-Id: I2882f5c30d6f932c36af4503ac0bec9229ef35df
CRs-fixed: 1082183
qcacld-2.0 to qcacld-3.0 propagation
Firmware can't support all station feature and 32 ibss clients
in one bin because of the mem limitation. So host supports to
download IBSS firmware bin if con_mode=6.
CRs-Fixed: 962246
Change-Id: I6c3dca17c82fdfd2bdadcee319cc157e6aa2ead9
Codeswap feature is introduced for a WLAN chipset which is already
cancelled. It is no longer used in host driver. Remove the feature
to avoid any confusion for future development.
Change-Id: I70ae291ded2d2e290408e2f5b177e872f1f3d7e8
CRs-fixed: 1082183
Call ICNSS API to get QMI support info and based on this
information later WLAN host driver decide to allocate 1 MB
Memory for MSA region or not.
CRs-Fixed: 1081443
Change-Id: I1ae0f3a0c92ded2df8e8c710be1faab6fde5cc10
A previous unit-test framework change contained some outstanding clean
code issues. Address the issues to ensure cleaner code is maintained.
Change-Id: I889d4e12a7c00b5fc6cb409bc077466019442456
CRs-Fixed: 1073756
Recently host power offload suspend/resume has switched to 3
stage process. Enhance power offload unit test framework accordingly,
and improve error handling.
Change-Id: I8cc1e955fbaca631ee7fd76b0c907d1e68c836bf
CRs-Fixed: 1072423
Socinfo API is not a standard system API. Hence, use PLD API to get
SOC serial number instead of calling socinfo API directly to enhance
driver portability.
Change-Id: I1d673d2f3b0066f4e05f2f465abc8a6cad7a1f8f
CRs-Fixed: 1069480
Clean up PLD source file by moving one-line function calls to
header file and make it static inline. Also, remove unused function.
Change-Id: Ibaa7357db4ac305f0bab9d8ad2f7dfe9351fda7d
CRs-Fixed: 1070075
Proivde PLD wrapper APIs for getting SMMU mapping
context and mapping SMMU to a specific physical address.
Change-Id: I3feb61b26c839547e4d050f62963e64f5ca062a7
CRs-Fixed: 1057714
Add PLD wrapper for platform athdiag read/write.
HIF will call these two functions when a athdiag read/write
triggered from user space.
CRs-Fixed: 1061837
Change-Id: Ie34c634beaf1cd91e24eca1b7ce5b6444a60393e
Register suspend_noirq/resume_noirq callbacks to kernel. It will
make sure no wake up is pending from FW and if initial wake up is
received then failing it should trigger resume.
Change-Id: Ie553dfc1401c2c6934961773bc98a24626a9cd34
CRs-Fixed: 1060669
This reverts Change-Id: I3d3de3789a7d560ed171294fa9a1ebe6389746a7
WLAN driver is blocked from promotion as the dependent kernel
change is not merged yet. PM suspend_noirq/resume_noirq are
not available after reverting.
CRs-Fixed: 1060669
Change-Id: I2b1300bbb19d2e4975bb86a82a892501b993827b
Register suspend_noirq/resume_noirq callbacks to kernel. It will
make sure no wake up is pending from FW and if initial wake up is
received then failing it should trigger resume.
Change-Id: I3d3de3789a7d560ed171294fa9a1ebe6389746a7
CRs-Fixed: 1060669
This reverts Change-Id Ifce8edc5db8c0410c5cddd24aceb88675f8ced42.
WLAN driver is blocked from promotion as the dependent kernel
change is not merged yet. PM suspend_noirq/resume_noirq are
not available after reverting.
CRs-Fixed: 1060669
Change-Id: I0e015d664681c3e2ba57a26b04318d4aa13f0406
Register suspend_noirq/resume_noirq callbacks to kernel. It will
make sure no wake up is pending from FW and if initial wake up is
received then failing it should trigger resume.
CRs-Fixed: 1060669
Change-Id: Ifce8edc5db8c0410c5cddd24aceb88675f8ced42
PLD stands for platform driver. It is a interface between CLD and
CNSS/ICNSS. It hides the CNSS/ICNSS APIs from CLD and provides a set
of common APIs.
Other modules should include pld_common.h if they want to call PLD
APIs.
Change-Id: I7591761d2a2be0e22fcad13a504e9fe5f92b9608
CRs-Fixed: 1015316
It is not flexible to call CNSS/ICNSS APIs directly in pld_common
as PCIE and SDIO share some CNSS APIs. It will introduce "duplicate
definition" errors when SDIO is added. Hence, add wrapper functions
for all used CNSS/ICNSS APIs.
CRs-Fixed: 1022778
Change-Id: I6a38434cfa99fc47543e995dd82b7d8ddc4453a7
PLD stands for platform driver. It is a interface between CLD and
CNSS/ICNSS. It hides the CNSS/ICNSS APIs from CLD and provides a set
of common APIs.
Other modules should include pld_common.h if they want to call PLD
APIs.
CRs-Fixed: 979275
Change-Id: I3571fc70f502dc367c65f13b412cd5d37ee41d3c
