Commit Graph

135 Commits

Author SHA1 Message Date
Zhu Yi
e3c5a64e70 [PATCH] ipw2200: Fix wpa_supplicant association problem
The new ipw2200 scan completion event feature will cause a potential event
race condition in wpa_supplicant. The patch fixes this problem by move the
ipw_disassociate() to the IW_AUTH_WPA_ENABLED event handling code.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:57 -04:00
Zhu Yi
127119d50f [PATCH] ipw2200: remove priv->last_noise reference
priv->last_noise is not used with the exponential averaging algorithm

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:57 -04:00
Zhu Yi
459d408768 [PATCH] ipw2200: rename CONFIG_IEEE80211_RADIOTAP to CONFIG_IPW2200_RADIOTAP
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:57 -04:00
Zhu Yi
e43e3c1e90 [PATCH] ipw2200: rename CONFIG_IPW_QOS to CONFIG_IPW2200_QOS
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:57 -04:00
Zhu Yi
555fd91852 [PATCH] ipw2200: update version stamp to 1.1.2
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:56 -04:00
Zhu Yi
ae4af61f6d [PATCH] ipw2200: version string rework
Added version string fields so the version string indicates what is
configured (ie, you'll see 1.1.1kpmd if you are using a GIT snapshot
(Kernel.. previously -git), promiscuous (p), monitor (m), debug (d) build.

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:56 -04:00
Zhu Yi
d685b8c226 [PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated
With this patch, a new promiscuous mode is enabled. If the module is loaded
with the rtap_iface=1 module parameter, two interfaces will be created
(instead of just one).

The second interface is prefixed 'rtap' and provides received 802.11 frames
on the current channel to user space in a radiotap header format.

Example usage:

        % modprobe ipw2200 rtap_iface=1
        % iwconfig eth1 essid MyNetwork
        % dhcpcd eth1
        % tcpdump -i rtap0

If you do not specify 'rtap_iface=1' then the rtap interface will
not be created and you will need to turn it on via:

        % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface

You can filter out what type of information is passed to user space via
the rtap_filter sysfs entry.  Currently you can tell the driver to
transmit just the headers (which will provide the RADIOTAP and IEEE
802.11 header but not the payload), to filter based on frame control
type (Management, Control, or Data), and whether to report transmitted
frames, received frames, or both.

The transmit frame reporting is based on a patch by Stefan Rompf.

Filters can be get and set via a sysfs interface. For example, set the
filter to only send headers (0x7), don't report Tx'd frames (0x10), and
don't report data frames (0x100):

        % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter

All your packets are belong to us:

        % tethereal -n -i rtap0

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:56 -04:00
Zhu Yi
0070f8c738 [PATCH] ipw2200: Fix endian issues with v3.0 fw image format
This patch corrects endian issues with the v3.0 fw image format.

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:56 -04:00
Zhu Yi
455936c733 [PATCH] ipw2200: Set the 'fixed' flags in wext get_rate
Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:55 -04:00
Zhu Yi
61fb9ed99d [PATCH] ipw2200: turn off signal debug log
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:55 -04:00
Zhu Yi
d0b526b715 [PATCH] ipw2200: Do not continue loading the firmware if kmalloc fails
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: "Zhu, Yi" <yi.zhu@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:55 -04:00
Zhu Yi
5dc81c3071 [PATCH] ipw2200: fix compile warning when !CONFIG_IPW2200_DEBUG
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:55 -04:00
Zhu Yi
d2b83e1214 [PATCH] ipw2200: add module_param support for antenna selection
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:55 -04:00
Zhu Yi
07f02e4625 [PATCH] ipw2200: generates a scan event after a scan has completed
The patch make ipw2200 generate the scan event every time a scan has
completed, so that user space know when to get fresh results.
Dan Williams would like to go towards this model in Network Manager
rather than having to poll.

Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:54 -04:00
Zhu Yi
a5cf4fe651 [PATCH] ipw2200: Fix TX QoS enabled frames problem
This patch works with the ieee80211 stack to set the correct QoS bit to the
ipw2200 card. It fixed the TX failure problem for using WPA with QoS.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:54 -04:00
Zhu Yi
00d21de5c6 [PATCH] ipw2200: Exponential averaging for signal and noise Level
This patch replaces sliding averaging by exponential averaging for
reporting the wireless statistics for signal and noise level for ipw2200.
See details from: http://www.ces.clemson.edu/linux/ipw2200_averages.shtml

Signed-off-by: Bill Moss <bmoss@clemson.edu>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-24 16:15:54 -04:00
Eric Sesterhenn
5d9428de1a BUG_ON() Conversion in drivers/net/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:52:48 +02:00
Zhu Yi
171e7b2f1f [PATCH] ipw2x00: expend Copyright to 2006
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 16:14:47 -05:00
Adrian Bunk
71e585fca2 [PATCH] drivers/net/wireless/ipw2200.c: fix an array overun
This patch fixes a big array overun found by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:41:20 -05:00
Zhu Yi
7c56789448 [PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:04 -05:00
James Ketrenos
9006ea75cf [PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image format
This patch modifies the driver to support the ipw2200-fw-3.0 image format.

The 3.0 fw image does not add any new capabilities, but as a result of
image format changes, it should fix two problems experienced by users:

1) Race conditions with the request_firmware interface and udev/hotplug
are improved as only a single request_firmware call is now required to
load the firmware and microcode (vs. 3 separate calls previously)

2) The monitor mode firmware (sniffer) is now packaged with the correct
boot image so it can now function without frequent restarts.

Note: Once you apply this patch, you will also need to upgrade your
firmware image to the 3.0 version available from:

        http://ipw2200.sf.net/firmware.php

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:04 -05:00
Olivier Hochreutiner
651be26f2d [PATCH] ipw2200: wireless extension sensitivity threshold support
The patch allows the user to set the handover threshold, i.e. the number
of consecutively missed beacons that will trigger a roaming attempt. The
disassociation threshold is set to 3 times the handover threshold.

Signed-off-by: Olivier Hochreutiner <olivier.hochreutiner@epfl.ch>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:04 -05:00
Cahill, Ben M
71de1f3dd1 [PATCH] ipw2200: Enables the "slow diversity" algorithm
This forces one antenna or the other, if the background noise is
significantly quieter in one than the other. It favors the quieter
antenna, and won't kick in unless the difference is significant.

Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:04 -05:00
Cahill, Ben M
12977154e7 [PATCH] ipw2200: Set a meaningful silence threshold value
Set a meaningful silence threshold value (replacing our previous "0"
default), which gets rid of the gratuitous "Link deterioration"
notifications that we've been receiving from firmware.  This
notification feature tells the driver information to help it determine
when to pre-emptively restart the firmware/ucode in anticipation of
firmware errors!  But since setting this new threshold, I haven't seen
any such notifications.  At least it keeps the logs a little less busy.

Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:04 -05:00
Zhu Yi
3e1555bae1 [PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUG
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:03 -05:00
Zhu Yi
1d1b09eb14 [PATCH] ipw2200: Change debug level for firmware error logging
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:03 -05:00
Zhu Yi
e815de422c [PATCH] ipw2200: Filter unsupported channels out in ad-hoc mode
Currently iwlist ethX freq[uency]/channel lists all the channels the card
supported for the current region, which includes some channels can only
be used in infrastructure mode. This patch filters these channels out if
the card is currently in ad-hoc mode.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:03 -05:00
Zhu Yi
e8c69e27d1 [PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with comment
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:03 -05:00
Zhu Yi
d6d5b5c13e [PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'
When loading the ipw2200 module with disabled=1, rf_kill is activated after
every mode change. This is caused by ipw_sw_reset() is called when a mode
is changed. The patch fixed the problem by distinguishing the purposes with
the 'option' paramenter.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:03 -05:00
Zhu Yi
8da374fc44 [PATCH] ipw2200: remove the WPA card associates to non-WPA AP checking
wpa_supplicant needs to set wpa_enabled unconditionally, with this check
it hasn't been possible to connect to non-WPA networks using wpa_supplicant.
So remove below check.

if (priv->ieee->wpa_enabled &&
	network->wpa_ie_len == 0 && network->rsn_ie_len == 0)

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:03 -05:00
Bill Moss
b191608a45 [PATCH] ipw2200: Add signal level to iwlist scan output
This patch does two things. It uses the parameter IW_QUAL_DBM which is new
in WE-19 to cause signal level and noise to be reported in dBm by the
wireless tools. It also defines the signal level as an unsigned integer
so that the signal level will be reported by iwlist iface scan.

Signed-off-by: Bill Moss <bmoss@clemson.edu>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:02 -05:00
Zhu Yi
9d0be03aee [PATCH] ipw2200: use generic ieee80211_get_hdrlen() to get packet length
replace ipw2200 specific frame_hdr_len() with generic
ieee80211 routine ieee80211_get_hdrlen()

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:02 -05:00
Zhu Yi
85149bace3 [PATCH] ipw2200: fix a potential NULL pointer dereference
Only on CONFIG_IPW2200_DEBUG is not defined

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:02 -05:00
James Ketrenos
f697014af9 [PATCH] ipw2200: stop netdev queue if h/w doesn't have space for new packets
The patch roll back the change we made to support for the ability to
start/stop independent Tx queues within a single net device in order to
support 802.11e QoS. We need to be able to indicate to the upper layers
that packets of a given priority can not be sent any more without halting
transmission of all packets, and without rescheduling high priority packets
down to the next priority level.

So we return NETDEV_TX_BUSY in this case and rely on the stack would
take care of rescheduling... which it apparently does immediately and
consumes the CPU. This caused the ksoftirqd kernel thread consuming almost
all the CPU...

To put the code back to the way it was before we made these changes we
put the call netif_queue_stop back in ipw_tx_skb.  This effectively
disables multiple priority based transmit queues for 802.11e, but given
that its broken anyway...

Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:02 -05:00
Henrik Brix Andersen
48a847709f [PATCH] ipw2200: print geography code upon module load
Given the amount of support requests for the meaning of the geography code
I've written a patch for printing this information on module load no matter
the debug level.

I've also added a section to the README.ipw2200 file listing the geography
codes and their meaning.

Signed-off-by: Henrik Brix Andersen <brix@gentoo.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 15:08:02 -05:00
Adrian Bunk
53d0bcf82a [PATCH] drivers/net/wireless/ipw2200.c: make ipw_qos_current_mode() static
This patch makes the needlessly global function ipw_qos_current_mode()
static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 14:16:44 -05:00
Larry Finger
1867b117d9 [PATCH] Remove duplicated code from ipw2200.c
As stated in a comment, the ipw2200 driver uses several routines that
were borrowed from ieee80211_geo.c. As ipw2200 requires ieee80211,
these routines are duplicated. The attached patch, which is sent
as an attachment to preserve whitespace, converts ipw2200.c to use
the ieee80211 versions, thereby reducing bloat in both the source
and binary.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17 14:01:34 -05:00
John W. Linville
9f5a405b68 Merge branch 'from-linus' 2006-02-27 20:12:23 -05:00
Zhu Yi
1dd31b6c89 [PATCH] ipw2200: Suppress warning message
The following message will be only printed if DEBUG_NOTIF is on.  "Unknown
notification: subtype=40,flags=0xa0,size=40"

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-20 20:00:11 -08:00
Zhu Yi
1ba61e05e2 [PATCH] ipw2200: Fix software crypto shared WEP authentication problem
We didn't set the WEP key to hardware when we are using software based
crypto. Hardware needs the key to do WEP authentication even for
software based encryption.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17 08:17:00 -05:00
Stefan Rompf
23afaec444 [PATCH] ipw2200: Fix WPA network selection problem
Do not avoid APs with wpa_ie or rsn_ie if !ieee->wpa_enabled
There are broken APs out there that fill these elements even
though encryption is disnabled. Also, this breaks legit WEP to
WPA migration scenarious.

We add a checking to prohibite WPA configured STA trying to
associate with non-WPA supported APs.

Signed-off-by: Stefan Rompf <stefan@loplof.de>
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17 08:16:59 -05:00
Jeff Garzik
3c9b3a8575 Merge branch 'master' 2006-02-07 01:47:12 -05:00
Alexey Dobriyan
386093ef9a [PATCH] ipw2200: fix ->eeprom[EEPROM_VERSION] check
priv->eeprom is a pointer.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Yi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-01 08:53:11 -08:00
Dan Williams
f1b50863aa [PATCH] wireless/ipw2200: support WE-18 WPA enc_capa
This patch allows ipw2100 driver to advertise the WPA-related encryption
options that it does really support.  It's necessary to work correctly
with NetworkManager and other programs that actually check driver & card
capabilities.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:35 -05:00
Zhu Yi
bde37d0377 [PATCH] ipw2200: Disable hwcrypto by default
After looking at the mailing list (and experiencing permanent driver lockups
while using hwcrypto=1) I think that disabling this option by default would
be better than otherwise.

Signed-off-by: Andreas Happe <andreashappe@snikt.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:35 -05:00
Zhu Yi
4644151b72 [PATCH] ipw2200: Semaphore to mutexes conversion
The conversion was generated via scripts, and the result was validated
automatically via a script as well.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Ronald Bultje <rbultje@ronald.bitfreak.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Cc: Yi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:35 -05:00
Zhu Yi
2638bc3941 [PATCH] ipw2200: remove white space and better format the code
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:34 -05:00
Zhu Yi
7c97eb3f1d [PATCH] ipw2200: increase ipw2200 driver version
increase ipw2200 driver version to git-1.0.10

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:34 -05:00
Zhu Yi
4e22699fa2 [PATCH] ipw2200: Fix qos_cmd param switch bug
The patch fixes a couple of errors regarding QoS, which results in
compile warnings and malfunction of the driver.

Signed-off-by: Henrik Brix Andersen <brix@gentoo.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:34 -05:00
Zhu Yi
0a7bcf261e [PATCH] ipw2200: stack reduction
Checking the stack usage of my kernel, showed that ipw2200 had a few bad
offenders. This is on i386 32-bit:

0x00002876 ipw_send_associate:                          544
0x000028ee ipw_send_associate:                          544
0x000027dc ipw_send_scan_request_ext:                   520
0x00002864 ipw_set_sensitivity:                         520
0x00005eac ipw_set_rsn_capa:                            520

The reason is the host_cmd structure is large (500 bytes). All other
functions currently using ipw_send_cmd() suffer from the same problem.
This patch introduces ipw_send_cmd_simple() for commands with no data
transfer, and ipw_send_cmd_pdu() for commands with a data payload and
makes the payload a pointer to the buffer passed in from the caller.

As an added bonus, the diffstat looks like this:

 ipw2200.c |  260 +++++++++++++++++++++-----------------------------------------
 ipw2200.h |    2
 2 files changed, 92 insertions(+), 170 deletions(-)

and it shrinks the module a lot as well:

Before:

   text    data     bss     dec     hex filename
  75177    2472      44   77693   12f7d drivers/net/wireless/ipw2200.ko

After:

   text    data     bss     dec     hex filename
  61363    2488      44   63895    f997 drivers/net/wireless/ipw2200.ko

So about a ~18% reduction in module size.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-01-30 20:35:34 -05:00