Add support for DP RX Threads as a part of the FR. Multiple RX threads
can be enabled from the ini. The code is added in a new DP module
outside of the cmn project.
Change-Id: Ief6ee955f13c5e527986307371b8e45677cb9700
CRs-Fixed: 2256446
When AP_DISCONNECT event occurs during IPA resource unloading
in progress, unload time out can happen due to IPA driver taking
time in suspending pipes or delay in FW HTT responses. In such
case events are added to pending queue. Pending queue events are
executed in worker thread context when resource unload is complete.
There is possibility of delay in scheduling of worker thread. When
worker thread is scheduled after HOST sends VDEV DELETE to FW and
processing of AP_DISCONNECT pening event will leads to FW assert.
Reason is as part of AP_DISCONNECT host sends IPA OFFLOAD disable
to FW on deleted vdev id. So send IPA RX offload disable command to
FW when AP_DISCONNECT is added to pending queue.
Change-Id: Ib24deb7654496ec60a3e56b8a9d1e1bd2d8c2db5
CRs-Fixed: 2295105
If SAP configured with RSN security IE, peer should
include compatible RSN parameters.
Reject the Assoc request if peer include invalid RSN
IE.
Change-Id: I10083d7feb669fe5d1c2650ae3c3092e5b28169e
CRs-Fixed: 2294876
The MAC context first_scan_done flag is a remnant from a prior version
of the driver which is initialized but then never read or written.
Since it is obsolete, remove it.
Change-Id: I81b371cb768bd2d042d3f3bf0991d2b27b953b3c
CRs-Fixed: 2298274
Currently the driver doesn't have a check to bring
up a SAP on STA SCC channel if its a SRD channel
and does force SCC on it, even if SRD master mode
is not supported.
Fix is to check the SRD ini before SAP bringup
on the STA channel
Change-Id: I17f7df9ed973ecc6669f0d36a8c390c71624019b
CRs-Fixed: 2302737
In target_if_action_oui_send_req(), there is no NULL check against
return value of GET_WMI_HDL_FROM_PSOC() which can result in NULL
pointer exception. Therefore, add NULL check.
Change-Id: Ibbc4fdf03563496b9d5dac63141921dd8bdea4fa
CRs-Fixed: 2299793
During the vdev attach if the self peer creation fails from the protocol
stack the correct vdev delete is sent to the firmware but the success error
is propogated back to the HDD and the wmi vdev set commands are sent
to the firmware with invalid vdev id.
Change-Id: Ida3964e5a629f53e41ffc50b53216762727fd33d
CRs-Fixed: 2299941
As part of Iab0862eda2392bd516c8ba0b913441b8e0d4c493 , timestamp of
last received frames was introduced to block excessive mgmt frames
being sent as part of Denial of service.
Move that logic to control path to remove dependency on data-path.
CRs-Fixed: 2280235
Change-Id: Idd7617782e71ee187eef7fcb3523c05b49f82094
Disable this feature for MOBILE_ROUTER product, since some MOBILE_ROUTER
platform will attach two wlan cards with separate wlan driver,
during second driver loading process, it will report a warning of
"cannot create duplicate filename" as node with same name has been
created after first driver was loaded.
Change-Id: I9e06439b3a6dacdf4eb5ae87898338ab1eeb8b16
CRs-Fixed: 2295391
In cds_trigger_recovery(), we avoid recovery if the wlan driver is
unloading. While this is ideal for production devices, we would like to
panic in debug builds for offline analysis. Move the check to see if the
wlan driver is unloading to immediately after the check to see if we
should panic or not.
Change-Id: I07cc624295416ca555eb4d847f709cf30e6672bb
CRs-Fixed: 2299903
Drop Probe request frames before posting on Scan Queue if the queue
is already having too many beacon/probe frames to process.
Change-Id: Iaad3d3ea0b50edf7ae7a9c5437ac5c210fe6a97f
CRs-Fixed: 2298581
The MAC context fMiracastSessionPresent flag is only referenced by
macro IS_MIRACAST_SESSION_PRESENT(), and this macro is unused. Since
the fMiracastSessionPresent flag is obsolete, remove it and the macro.
Change-Id: I5ad6e5b56bd0476e7894c431b56b9ad5730923d4
CRs-Fixed: 2300050
Make the following updates to the extscan stop BSSID hotlist logic:
1) Exclusively use the Unified WMI data structures.
2) Update the HDD<=>SME interface to enforce the contract that SME
must not make any assumptions about the buffers provided by HDD.
Change-Id: I01e29a96fded829c734532b021aeea1960bba641
CRs-Fixed: 2294273
Recently change "qcacld-3.0: Use mac_handle_t in wlan_hdd_ioctl"
updated the nomenclature used in HDD. During the implementation of
this change a NULL check of mac_handle in hdd_set_dwell_time() had a
"!" removed, incorrectly changing the logic. Restore the correct logic
for NULL-checking mac_handle.
Change-Id: I2bb8393d5adb3156795b3b722d839812419e4995
CRs-Fixed: 2299812
QDF_DEBUG_PANIC() is stubbed out for PERF builds, leading to a warning
in cds_trigger_recovery() because @call_info is unused. Extract the
trigger recovery handling into its own function with proper types
instead of void*, and make cds_trigger_recovery_work() a thin wrapper
over this to do the type conversion. This will address the unused
variable warning, and provide stronger type checks via the compiler.
Change-Id: Idf712bdf30d2c6c338219a0327221fe6a0b0b27a
CRs-Fixed: 2299813
Add support for wildcard OUI 0xFFFFFF in action OUI framework.
When the OUI FFFFFF is defined for some action OUI ini and bit 0
of info_presence bit is set to 0 then the check for vendor OUI
in vendor specific IEs and the vendor IE data checks are skipped
and other checks like MAC, Capabilities are done during connection.
Change-Id: I6e996c5d79f4f7bd91e11134b1b8ba69a1ff0253
CRs-Fixed: 2293167
While ACS delayed worker scheduled and is running the function
wlan_hdd_cfg80211_start_acs(), ACS_PENDING has already been cleared by
wlan_hdd_cfg80211_start_pending_acs() before it, so the later coming
stop sap event can't cancel the running delayed worker and free the
sap context which need access by delayed worker.
Fix by clear ACS_PENDING after wlan_hdd_cfg80211_start_acs(), and move
cancel ACS delayed worker before cancel any scan, it can cancel ACS
scan invoke by delayed worker and avoid race condition.
CRs-Fixed: 2289364
Change-Id: Ibd771fc199a0778ac1d8f1f04ba22b49014437de
The MAC context ftm_msg_processor_callback is a remnant from the
legacy FTM support. Since this callback is no longer used, remove it.
Change-Id: Ibd375bcd91900654315681f7f9b56bf100090942
CRs-Fixed: 2298895
Add the basic infra for MLME CFG items and the APIs to be used from
other components.
Change-Id: I39654de8f7266089d574b85437a19e8d21f91249
CRs-Fixed: 2293825
During ssid restart currently driver send vdev stop and then
restart. There is no need to send vdev stop in this scenario and
direct vdev start is enough to set hidden ssid.
Thus remove vdev stop during hidden ssid restart.
Change-Id: Ide6826f73ecd51bbafa875ed547efeff4a410397
CRs-Fixed: 2298636
Currently the driver doesn't handle the nss update
if a prior connection is already present in DBS
mode. Suppose if a STA is already connected in
5ghz and the SAP comes up in 2.4ghz, the beacon
template should be updated with NSS = 1
Fix is to check whether the current hw_mode is in
DBS or not, and change the nss in the beacon template
accordingly
Change-Id: I54ead1fd26d705a821160b5bc5d816df1d2ab8f4
CRs-Fixed: 2288307
Currently VDEV Force cleanup happens only if FW is in recovery state
and not if target_ready is set to false. However, since FW down flag
is set for recovery case also, even during SSR, the VDEV Force clean up
is not triggered.
Force cleanup vdev for FW down case also in wma_vdev_detach.
Change-Id: I3ba6dc92c1c5ea1090f9f5dc9062775de6db1954
CRs-Fixed: 2298278
Several HDD logs have been identified as being excessive. Reduce the
logging level of these logs to avoid spamming dmesg.
Change-Id: I49e0f91c5d66051f9e6ffd991d86505a11faa346
CRs-Fixed: 2298385
To speed up recovery trigger debugging, pass the caller's function name
and line number, such that the group needing to do the initial triage
can be easily identified via the panic message.
Change-Id: Ibac141a62a990adf7a781d7ef64544d92ff4e31b
CRs-Fixed: 2298194
