/* SPDX-License-Identifier: GPL-2.0-only */ /* * {read,write}{b,w,l,q} based on arch/arm64/include/asm/io.h * which was based on arch/arm/include/io.h * * Copyright (C) 1996-2000 Russell King * Copyright (C) 2012 ARM Ltd. * Copyright (C) 2014 Regents of the University of California */ #ifndef _ASM_RISCV_IO_H #define _ASM_RISCV_IO_H #include #include #include extern void __iomem *ioremap(phys_addr_t offset, unsigned long size); /* * The RISC-V ISA doesn't yet specify how to query or modify PMAs, so we can't * change the properties of memory regions. This should be fixed by the * upcoming platform spec. */ #define ioremap_nocache(addr, size) ioremap((addr), (size)) #define ioremap_wc(addr, size) ioremap((addr), (size)) #define ioremap_wt(addr, size) ioremap((addr), (size)) extern void iounmap(volatile void __iomem *addr); /* Generic IO read/write. These perform native-endian accesses. */ #define __raw_writeb __raw_writeb static inline void __raw_writeb(u8 val, volatile void __iomem *addr) { asm volatile("sb %0, 0(%1)" : : "r" (val), "r" (addr)); } #define __raw_writew __raw_writew static inline void __raw_writew(u16 val, volatile void __iomem *addr) { asm volatile("sh %0, 0(%1)" : : "r" (val), "r" (addr)); } #define __raw_writel __raw_writel static inline void __raw_writel(u32 val, volatile void __iomem *addr) { asm volatile("sw %0, 0(%1)" : : "r" (val), "r" (addr)); } #ifdef CONFIG_64BIT #define __raw_writeq __raw_writeq static inline void __raw_writeq(u64 val, volatile void __iomem *addr) { asm volatile("sd %0, 0(%1)" : : "r" (val), "r" (addr)); } #endif #define __raw_readb __raw_readb static inline u8 __raw_readb(const volatile void __iomem *addr) { u8 val; asm volatile("lb %0, 0(%1)" : "=r" (val) : "r" (addr)); return val; } #define __raw_readw __raw_readw static inline u16 __raw_readw(const volatile void __iomem *addr) { u16 val; asm volatile("lh %0, 0(%1)" : "=r" (val) : "r" (addr)); return val; } #define __raw_readl __raw_readl static inline u32 __raw_readl(const volatile void __iomem *addr) { u32 val; asm volatile("lw %0, 0(%1)" : "=r" (val) : "r" (addr)); return val; } #ifdef CONFIG_64BIT #define __raw_readq __raw_readq static inline u64 __raw_readq(const volatile void __iomem *addr) { u64 val; asm volatile("ld %0, 0(%1)" : "=r" (val) : "r" (addr)); return val; } #endif /* * Unordered I/O memory access primitives. These are even more relaxed than * the relaxed versions, as they don't even order accesses between successive * operations to the I/O regions. */ #define readb_cpu(c) ({ u8 __r = __raw_readb(c); __r; }) #define readw_cpu(c) ({ u16 __r = le16_to_cpu((__force __le16)__raw_readw(c)); __r; }) #define readl_cpu(c) ({ u32 __r = le32_to_cpu((__force __le32)__raw_readl(c)); __r; }) #define writeb_cpu(v,c) ((void)__raw_writeb((v),(c))) #define writew_cpu(v,c) ((void)__raw_writew((__force u16)cpu_to_le16(v),(c))) #define writel_cpu(v,c) ((void)__raw_writel((__force u32)cpu_to_le32(v),(c))) #ifdef CONFIG_64BIT #define readq_cpu(c) ({ u64 __r = le64_to_cpu((__force __le64)__raw_readq(c)); __r; }) #define writeq_cpu(v,c) ((void)__raw_writeq((__force u64)cpu_to_le64(v),(c))) #endif /* * Relaxed I/O memory access primitives. These follow the Device memory * ordering rules but do not guarantee any ordering relative to Normal memory * accesses. These are defined to order the indicated access (either a read or * write) with all other I/O memory accesses. Since the platform specification * defines that all I/O regions are strongly ordered on channel 2, no explicit * fences are required to enforce this ordering. */ /* FIXME: These are now the same as asm-generic */ #define __io_rbr() do {} while (0) #define __io_rar() do {} while (0) #define __io_rbw() do {} while (0) #define __io_raw() do {} while (0) #define readb_relaxed(c) ({ u8 __v; __io_rbr(); __v = readb_cpu(c); __io_rar(); __v; }) #define readw_relaxed(c) ({ u16 __v; __io_rbr(); __v = readw_cpu(c); __io_rar(); __v; }) #define readl_relaxed(c) ({ u32 __v; __io_rbr(); __v = readl_cpu(c); __io_rar(); __v; }) #define writeb_relaxed(v,c) ({ __io_rbw(); writeb_cpu((v),(c)); __io_raw(); }) #define writew_relaxed(v,c) ({ __io_rbw(); writew_cpu((v),(c)); __io_raw(); }) #define writel_relaxed(v,c) ({ __io_rbw(); writel_cpu((v),(c)); __io_raw(); }) #ifdef CONFIG_64BIT #define readq_relaxed(c) ({ u64 __v; __io_rbr(); __v = readq_cpu(c); __io_rar(); __v; }) #define writeq_relaxed(v,c) ({ __io_rbw(); writeq_cpu((v),(c)); __io_raw(); }) #endif /* * I/O memory access primitives. Reads are ordered relative to any * following Normal memory access. Writes are ordered relative to any prior * Normal memory access. The memory barriers here are necessary as RISC-V * doesn't define any ordering between the memory space and the I/O space. */ #define __io_br() do {} while (0) #define __io_ar(v) __asm__ __volatile__ ("fence i,r" : : : "memory"); #define __io_bw() __asm__ __volatile__ ("fence w,o" : : : "memory"); #define __io_aw() mmiowb_set_pending() #define readb(c) ({ u8 __v; __io_br(); __v = readb_cpu(c); __io_ar(__v); __v; }) #define readw(c) ({ u16 __v; __io_br(); __v = readw_cpu(c); __io_ar(__v); __v; }) #define readl(c) ({ u32 __v; __io_br(); __v = readl_cpu(c); __io_ar(__v); __v; }) #define writeb(v,c) ({ __io_bw(); writeb_cpu((v),(c)); __io_aw(); }) #define writew(v,c) ({ __io_bw(); writew_cpu((v),(c)); __io_aw(); }) #define writel(v,c) ({ __io_bw(); writel_cpu((v),(c)); __io_aw(); }) #ifdef CONFIG_64BIT #define readq(c) ({ u64 __v; __io_br(); __v = readq_cpu(c); __io_ar(__v); __v; }) #define writeq(v,c) ({ __io_bw(); writeq_cpu((v),(c)); __io_aw(); }) #endif /* * I/O port access constants. */ #define IO_SPACE_LIMIT (PCI_IO_SIZE - 1) #define PCI_IOBASE ((void __iomem *)PCI_IO_START) /* * Emulation routines for the port-mapped IO space used by some PCI drivers. * These are defined as being "fully synchronous", but also "not guaranteed to * be fully ordered with respect to other memory and I/O operations". We're * going to be on the safe side here and just make them: * - Fully ordered WRT each other, by bracketing them with two fences. The * outer set contains both I/O so inX is ordered with outX, while the inner just * needs the type of the access (I for inX and O for outX). * - Ordered in the same manner as readX/writeX WRT memory by subsuming their * fences. * - Ordered WRT timer reads, so udelay and friends don't get elided by the * implementation. * Note that there is no way to actually enforce that outX is a non-posted * operation on RISC-V, but hopefully the timer ordering constraint is * sufficient to ensure this works sanely on controllers that support I/O * writes. */ #define __io_pbr() __asm__ __volatile__ ("fence io,i" : : : "memory"); #define __io_par(v) __asm__ __volatile__ ("fence i,ior" : : : "memory"); #define __io_pbw() __asm__ __volatile__ ("fence iow,o" : : : "memory"); #define __io_paw() __asm__ __volatile__ ("fence o,io" : : : "memory"); #define inb(c) ({ u8 __v; __io_pbr(); __v = readb_cpu((void*)(PCI_IOBASE + (c))); __io_par(__v); __v; }) #define inw(c) ({ u16 __v; __io_pbr(); __v = readw_cpu((void*)(PCI_IOBASE + (c))); __io_par(__v); __v; }) #define inl(c) ({ u32 __v; __io_pbr(); __v = readl_cpu((void*)(PCI_IOBASE + (c))); __io_par(__v); __v; }) #define outb(v,c) ({ __io_pbw(); writeb_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); }) #define outw(v,c) ({ __io_pbw(); writew_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); }) #define outl(v,c) ({ __io_pbw(); writel_cpu((v),(void*)(PCI_IOBASE + (c))); __io_paw(); }) #ifdef CONFIG_64BIT #define inq(c) ({ u64 __v; __io_pbr(); __v = readq_cpu((void*)(c)); __io_par(__v); __v; }) #define outq(v,c) ({ __io_pbw(); writeq_cpu((v),(void*)(c)); __io_paw(); }) #endif /* * Accesses from a single hart to a single I/O address must be ordered. This * allows us to use the raw read macros, but we still need to fence before and * after the block to ensure ordering WRT other macros. These are defined to * perform host-endian accesses so we use __raw instead of __cpu. */ #define __io_reads_ins(port, ctype, len, bfence, afence) \ static inline void __ ## port ## len(const volatile void __iomem *addr, \ void *buffer, \ unsigned int count) \ { \ bfence; \ if (count) { \ ctype *buf = buffer; \ \ do { \ ctype x = __raw_read ## len(addr); \ *buf++ = x; \ } while (--count); \ } \ afence; \ } #define __io_writes_outs(port, ctype, len, bfence, afence) \ static inline void __ ## port ## len(volatile void __iomem *addr, \ const void *buffer, \ unsigned int count) \ { \ bfence; \ if (count) { \ const ctype *buf = buffer; \ \ do { \ __raw_write ## len(*buf++, addr); \ } while (--count); \ } \ afence; \ } __io_reads_ins(reads, u8, b, __io_br(), __io_ar(addr)) __io_reads_ins(reads, u16, w, __io_br(), __io_ar(addr)) __io_reads_ins(reads, u32, l, __io_br(), __io_ar(addr)) #define readsb(addr, buffer, count) __readsb(addr, buffer, count) #define readsw(addr, buffer, count) __readsw(addr, buffer, count) #define readsl(addr, buffer, count) __readsl(addr, buffer, count) __io_reads_ins(ins, u8, b, __io_pbr(), __io_par(addr)) __io_reads_ins(ins, u16, w, __io_pbr(), __io_par(addr)) __io_reads_ins(ins, u32, l, __io_pbr(), __io_par(addr)) #define insb(addr, buffer, count) __insb(PCI_IOBASE + (addr), buffer, count) #define insw(addr, buffer, count) __insw(PCI_IOBASE + (addr), buffer, count) #define insl(addr, buffer, count) __insl(PCI_IOBASE + (addr), buffer, count) __io_writes_outs(writes, u8, b, __io_bw(), __io_aw()) __io_writes_outs(writes, u16, w, __io_bw(), __io_aw()) __io_writes_outs(writes, u32, l, __io_bw(), __io_aw()) #define writesb(addr, buffer, count) __writesb(addr, buffer, count) #define writesw(addr, buffer, count) __writesw(addr, buffer, count) #define writesl(addr, buffer, count) __writesl(addr, buffer, count) __io_writes_outs(outs, u8, b, __io_pbw(), __io_paw()) __io_writes_outs(outs, u16, w, __io_pbw(), __io_paw()) __io_writes_outs(outs, u32, l, __io_pbw(), __io_paw()) #define outsb(addr, buffer, count) __outsb(PCI_IOBASE + (addr), buffer, count) #define outsw(addr, buffer, count) __outsw(PCI_IOBASE + (addr), buffer, count) #define outsl(addr, buffer, count) __outsl(PCI_IOBASE + (addr), buffer, count) #ifdef CONFIG_64BIT __io_reads_ins(reads, u64, q, __io_br(), __io_ar(addr)) #define readsq(addr, buffer, count) __readsq(addr, buffer, count) __io_reads_ins(ins, u64, q, __io_pbr(), __io_par(addr)) #define insq(addr, buffer, count) __insq(PCI_IOBASE + (addr), buffer, count) __io_writes_outs(writes, u64, q, __io_bw(), __io_aw()) #define writesq(addr, buffer, count) __writesq(addr, buffer, count) __io_writes_outs(outs, u64, q, __io_pbr(), __io_paw()) #define outsq(addr, buffer, count) __outsq(PCI_IOBASE + (addr), buffer, count) #endif #include #endif /* _ASM_RISCV_IO_H */