/** * @file nmi_int.c * * @remark Copyright 2002 OProfile authors * @remark Read the file COPYING * * @author John Levon */ #include #include #include #include #include #include #include #include #include #include #include #include "op_counter.h" #include "op_x86_model.h" static struct op_x86_model_spec const *model; static DEFINE_PER_CPU(struct op_msrs, cpu_msrs); static DEFINE_PER_CPU(unsigned long, saved_lvtpc); static int nmi_start(void); static void nmi_stop(void); /* 0 == registered but off, 1 == registered and on */ static int nmi_enabled = 0; #ifdef CONFIG_PM static int nmi_suspend(struct sys_device *dev, pm_message_t state) { if (nmi_enabled == 1) nmi_stop(); return 0; } static int nmi_resume(struct sys_device *dev) { if (nmi_enabled == 1) nmi_start(); return 0; } static struct sysdev_class oprofile_sysclass = { .name = "oprofile", .resume = nmi_resume, .suspend = nmi_suspend, }; static struct sys_device device_oprofile = { .id = 0, .cls = &oprofile_sysclass, }; static int __init init_sysfs(void) { int error; error = sysdev_class_register(&oprofile_sysclass); if (!error) error = sysdev_register(&device_oprofile); return error; } static void exit_sysfs(void) { sysdev_unregister(&device_oprofile); sysdev_class_unregister(&oprofile_sysclass); } #else #define init_sysfs() do { } while (0) #define exit_sysfs() do { } while (0) #endif /* CONFIG_PM */ static int profile_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { struct die_args *args = (struct die_args *)data; int ret = NOTIFY_DONE; int cpu = smp_processor_id(); switch (val) { case DIE_NMI: if (model->check_ctrs(args->regs, &per_cpu(cpu_msrs, cpu))) ret = NOTIFY_STOP; break; default: break; } return ret; } static void nmi_cpu_save_registers(struct op_msrs *msrs) { unsigned int const nr_ctrs = model->num_counters; unsigned int const nr_ctrls = model->num_controls; struct op_msr *counters = msrs->counters; struct op_msr *controls = msrs->controls; unsigned int i; for (i = 0; i < nr_ctrs; ++i) { if (counters[i].addr) { rdmsr(counters[i].addr, counters[i].saved.low, counters[i].saved.high); } } for (i = 0; i < nr_ctrls; ++i) { if (controls[i].addr) { rdmsr(controls[i].addr, controls[i].saved.low, controls[i].saved.high); } } } static void nmi_save_registers(void *dummy) { int cpu = smp_processor_id(); struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu); nmi_cpu_save_registers(msrs); } static void free_msrs(void) { int i; for_each_possible_cpu(i) { kfree(per_cpu(cpu_msrs, i).counters); per_cpu(cpu_msrs, i).counters = NULL; kfree(per_cpu(cpu_msrs, i).controls); per_cpu(cpu_msrs, i).controls = NULL; } } static int allocate_msrs(void) { int success = 1; size_t controls_size = sizeof(struct op_msr) * model->num_controls; size_t counters_size = sizeof(struct op_msr) * model->num_counters; int i; for_each_possible_cpu(i) { per_cpu(cpu_msrs, i).counters = kmalloc(counters_size, GFP_KERNEL); if (!per_cpu(cpu_msrs, i).counters) { success = 0; break; } per_cpu(cpu_msrs, i).controls = kmalloc(controls_size, GFP_KERNEL); if (!per_cpu(cpu_msrs, i).controls) { success = 0; break; } } if (!success) free_msrs(); return success; } static void nmi_cpu_setup(void *dummy) { int cpu = smp_processor_id(); struct op_msrs *msrs = &per_cpu(cpu_msrs, cpu); spin_lock(&oprofilefs_lock); model->setup_ctrs(msrs); spin_unlock(&oprofilefs_lock); per_cpu(saved_lvtpc, cpu) = apic_read(APIC_LVTPC); apic_write(APIC_LVTPC, APIC_DM_NMI); } static struct notifier_block profile_exceptions_nb = { .notifier_call = profile_exceptions_notify, .next = NULL, .priority = 0 }; static int nmi_setup(void) { int err = 0; int cpu; if (!allocate_msrs()) return -ENOMEM; err = register_die_notifier(&profile_exceptions_nb); if (err) { free_msrs(); return err; } /* We need to serialize save and setup for HT because the subset * of msrs are distinct for save and setup operations */ /* Assume saved/restored counters are the same on all CPUs */ model->fill_in_addresses(&per_cpu(cpu_msrs, 0)); for_each_possible_cpu(cpu) { if (cpu != 0) { memcpy(per_cpu(cpu_msrs, cpu).counters, per_cpu(cpu_msrs, 0).counters, sizeof(struct op_msr) * model->num_counters); memcpy(per_cpu(cpu_msrs, cpu).controls, per_cpu(cpu_msrs, 0).controls, sizeof(struct op_msr) * model->num_controls); } } on_each_cpu(nmi_save_registers, NULL, 1); on_each_cpu(nmi_cpu_setup, NULL, 1); nmi_enabled = 1; return 0; } static void nmi_restore_registers(struct op_msrs *msrs) { unsigned int const nr_ctrs = model->num_counters; unsigned int const nr_ctrls = model->num_controls; struct op_msr *counters = msrs->counters; struct op_msr *controls = msrs->controls; unsigned int i; for (i = 0; i < nr_ctrls; ++i) { if (controls[i].addr) { wrmsr(controls[i].addr, controls[i].saved.low, controls[i].saved.high); } } for (i = 0; i < nr_ctrs; ++i) { if (counters[i].addr) { wrmsr(counters[i].addr, counters[i].saved.low, counters[i].saved.high); } } } static void nmi_cpu_shutdown(void *dummy) { unsigned int v; int cpu = smp_processor_id(); struct op_msrs *msrs = &__get_cpu_var(cpu_msrs); /* restoring APIC_LVTPC can trigger an apic error because the delivery * mode and vector nr combination can be illegal. That's by design: on * power on apic lvt contain a zero vector nr which are legal only for * NMI delivery mode. So inhibit apic err before restoring lvtpc */ v = apic_read(APIC_LVTERR); apic_write(APIC_LVTERR, v | APIC_LVT_MASKED); apic_write(APIC_LVTPC, per_cpu(saved_lvtpc, cpu)); apic_write(APIC_LVTERR, v); nmi_restore_registers(msrs); } static void nmi_shutdown(void) { struct op_msrs *msrs = &get_cpu_var(cpu_msrs); nmi_enabled = 0; on_each_cpu(nmi_cpu_shutdown, NULL, 1); unregister_die_notifier(&profile_exceptions_nb); model->shutdown(msrs); free_msrs(); put_cpu_var(cpu_msrs); } static void nmi_cpu_start(void *dummy) { struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs); model->start(msrs); } static int nmi_start(void) { on_each_cpu(nmi_cpu_start, NULL, 1); return 0; } static void nmi_cpu_stop(void *dummy) { struct op_msrs const *msrs = &__get_cpu_var(cpu_msrs); model->stop(msrs); } static void nmi_stop(void) { on_each_cpu(nmi_cpu_stop, NULL, 1); } struct op_counter_config counter_config[OP_MAX_COUNTER]; static int nmi_create_files(struct super_block *sb, struct dentry *root) { unsigned int i; for (i = 0; i < model->num_counters; ++i) { struct dentry *dir; char buf[4]; /* quick little hack to _not_ expose a counter if it is not * available for use. This should protect userspace app. * NOTE: assumes 1:1 mapping here (that counters are organized * sequentially in their struct assignment). */ if (unlikely(!avail_to_resrv_perfctr_nmi_bit(i))) continue; snprintf(buf, sizeof(buf), "%d", i); dir = oprofilefs_mkdir(sb, root, buf); oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled); oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event); oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count); oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask); oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel); oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user); } return 0; } static int p4force; module_param(p4force, int, 0); static int __init p4_init(char **cpu_type) { __u8 cpu_model = boot_cpu_data.x86_model; if (!p4force && (cpu_model > 6 || cpu_model == 5)) return 0; #ifndef CONFIG_SMP *cpu_type = "i386/p4"; model = &op_p4_spec; return 1; #else switch (smp_num_siblings) { case 1: *cpu_type = "i386/p4"; model = &op_p4_spec; return 1; case 2: *cpu_type = "i386/p4-ht"; model = &op_p4_ht2_spec; return 1; } #endif printk(KERN_INFO "oprofile: P4 HyperThreading detected with > 2 threads\n"); printk(KERN_INFO "oprofile: Reverting to timer mode.\n"); return 0; } static int __init ppro_init(char **cpu_type) { __u8 cpu_model = boot_cpu_data.x86_model; switch (cpu_model) { case 0 ... 2: *cpu_type = "i386/ppro"; break; case 3 ... 5: *cpu_type = "i386/pii"; break; case 6 ... 8: *cpu_type = "i386/piii"; break; case 9: *cpu_type = "i386/p6_mobile"; break; case 10 ... 13: *cpu_type = "i386/p6"; break; case 14: *cpu_type = "i386/core"; break; case 15: case 23: *cpu_type = "i386/core_2"; break; case 26: *cpu_type = "i386/core_2"; break; default: /* Unknown */ return 0; } model = &op_ppro_spec; return 1; } /* in order to get sysfs right */ static int using_nmi; int __init op_nmi_init(struct oprofile_operations *ops) { __u8 vendor = boot_cpu_data.x86_vendor; __u8 family = boot_cpu_data.x86; char *cpu_type; if (!cpu_has_apic) return -ENODEV; switch (vendor) { case X86_VENDOR_AMD: /* Needs to be at least an Athlon (or hammer in 32bit mode) */ switch (family) { default: return -ENODEV; case 6: model = &op_athlon_spec; cpu_type = "i386/athlon"; break; case 0xf: model = &op_athlon_spec; /* Actually it could be i386/hammer too, but give user space an consistent name. */ cpu_type = "x86-64/hammer"; break; case 0x10: model = &op_athlon_spec; cpu_type = "x86-64/family10"; break; case 0x11: model = &op_athlon_spec; cpu_type = "x86-64/family11h"; break; } break; case X86_VENDOR_INTEL: switch (family) { /* Pentium IV */ case 0xf: if (!p4_init(&cpu_type)) return -ENODEV; break; /* A P6-class processor */ case 6: if (!ppro_init(&cpu_type)) return -ENODEV; break; default: return -ENODEV; } break; default: return -ENODEV; } init_sysfs(); using_nmi = 1; ops->create_files = nmi_create_files; ops->setup = nmi_setup; ops->shutdown = nmi_shutdown; ops->start = nmi_start; ops->stop = nmi_stop; ops->cpu_type = cpu_type; printk(KERN_INFO "oprofile: using NMI interrupt.\n"); return 0; } void op_nmi_exit(void) { if (using_nmi) exit_sysfs(); }