/* -*- linux-c -*- * * drivers/char/viocons.c * * iSeries Virtual Terminal * * Authors: Dave Boutcher <boutcher@us.ibm.com> * Ryan Arnold <ryanarn@us.ibm.com> * Colin Devilbiss <devilbis@us.ibm.com> * Stephen Rothwell <sfr@au1.ibm.com> * * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License, or (at your option) anyu later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> #include <linux/proc_fs.h> #include <linux/errno.h> #include <linux/vmalloc.h> #include <linux/mm.h> #include <linux/console.h> #include <linux/module.h> #include <asm/uaccess.h> #include <linux/init.h> #include <linux/wait.h> #include <linux/spinlock.h> #include <asm/ioctls.h> #include <linux/kd.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/sysrq.h> #include <asm/firmware.h> #include <asm/iseries/vio.h> #include <asm/iseries/hv_lp_event.h> #include <asm/iseries/hv_call_event.h> #include <asm/iseries/hv_lp_config.h> #include <asm/iseries/hv_call.h> #ifdef CONFIG_VT #error You must turn off CONFIG_VT to use CONFIG_VIOCONS #endif #define VIOTTY_MAGIC (0x0DCB) #define VTTY_PORTS 10 #define VIOCONS_KERN_WARN KERN_WARNING "viocons: " #define VIOCONS_KERN_INFO KERN_INFO "viocons: " static DEFINE_SPINLOCK(consolelock); static DEFINE_SPINLOCK(consoleloglock); static int vio_sysrq_pressed; #define VIOCHAR_NUM_BUF 16 /* * Our port information. We store a pointer to one entry in the * tty_driver_data */ static struct port_info { int magic; struct tty_struct *tty; HvLpIndex lp; u8 vcons; u64 seq; /* sequence number of last HV send */ u64 ack; /* last ack from HV */ /* * When we get writes faster than we can send it to the partition, * buffer the data here. Note that used is a bit map of used buffers. * It had better have enough bits to hold VIOCHAR_NUM_BUF the bitops assume * it is a multiple of unsigned long */ unsigned long used; u8 *buffer[VIOCHAR_NUM_BUF]; int bufferBytes[VIOCHAR_NUM_BUF]; int curbuf; int bufferOverflow; int overflowMessage; } port_info[VTTY_PORTS]; #define viochar_is_console(pi) ((pi) == &port_info[0]) #define viochar_port(pi) ((pi) - &port_info[0]) static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp); static struct tty_driver *viotty_driver; static void hvlog(char *fmt, ...) { int i; unsigned long flags; va_list args; static char buf[256]; spin_lock_irqsave(&consoleloglock, flags); va_start(args, fmt); i = vscnprintf(buf, sizeof(buf) - 1, fmt, args); va_end(args); buf[i++] = '\r'; HvCall_writeLogBuffer(buf, i); spin_unlock_irqrestore(&consoleloglock, flags); } static void hvlogOutput(const char *buf, int count) { unsigned long flags; int begin; int index; static const char cr = '\r'; begin = 0; spin_lock_irqsave(&consoleloglock, flags); for (index = 0; index < count; index++) { if (buf[index] == '\n') { /* * Start right after the last '\n' or at the zeroth * array position and output the number of characters * including the newline. */ HvCall_writeLogBuffer(&buf[begin], index - begin + 1); begin = index + 1; HvCall_writeLogBuffer(&cr, 1); } } if ((index - begin) > 0) HvCall_writeLogBuffer(&buf[begin], index - begin); spin_unlock_irqrestore(&consoleloglock, flags); } /* * Make sure we're pointing to a valid port_info structure. Shamelessly * plagerized from serial.c */ static inline int viotty_paranoia_check(struct port_info *pi, char *name, const char *routine) { static const char *bad_pi_addr = VIOCONS_KERN_WARN "warning: bad address for port_info struct (%s) in %s\n"; static const char *badmagic = VIOCONS_KERN_WARN "warning: bad magic number for port_info struct (%s) in %s\n"; if ((pi < &port_info[0]) || (viochar_port(pi) > VTTY_PORTS)) { printk(bad_pi_addr, name, routine); return 1; } if (pi->magic != VIOTTY_MAGIC) { printk(badmagic, name, routine); return 1; } return 0; } /* * Add data to our pending-send buffers. * * NOTE: Don't use printk in here because it gets nastily recursive. * hvlog can be used to log to the hypervisor buffer */ static int buffer_add(struct port_info *pi, const char *buf, size_t len) { size_t bleft; size_t curlen; const char *curbuf; int nextbuf; curbuf = buf; bleft = len; while (bleft > 0) { /* * If there is no space left in the current buffer, we have * filled everything up, so return. If we filled the previous * buffer we would already have moved to the next one. */ if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) { hvlog ("\n\rviocons: No overflow buffer available for memcpy().\n"); pi->bufferOverflow++; pi->overflowMessage = 1; break; } /* * Turn on the "used" bit for this buffer. If it's already on, * that's fine. */ set_bit(pi->curbuf, &pi->used); /* * See if this buffer has been allocated. If not, allocate it. */ if (pi->buffer[pi->curbuf] == NULL) { pi->buffer[pi->curbuf] = kmalloc(VIOCHAR_MAX_DATA, GFP_ATOMIC); if (pi->buffer[pi->curbuf] == NULL) { hvlog("\n\rviocons: kmalloc failed allocating spaces for buffer %d.", pi->curbuf); break; } } /* Figure out how much we can copy into this buffer. */ if (bleft < (VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf])) curlen = bleft; else curlen = VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf]; /* Copy the data into the buffer. */ memcpy(pi->buffer[pi->curbuf] + pi->bufferBytes[pi->curbuf], curbuf, curlen); pi->bufferBytes[pi->curbuf] += curlen; curbuf += curlen; bleft -= curlen; /* * Now see if we've filled this buffer. If not then * we'll try to use it again later. If we've filled it * up then we'll advance the curbuf to the next in the * circular queue. */ if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) { nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF; /* * Move to the next buffer if it hasn't been used yet */ if (test_bit(nextbuf, &pi->used) == 0) pi->curbuf = nextbuf; } } return len - bleft; } /* * Send pending data * * NOTE: Don't use printk in here because it gets nastily recursive. * hvlog can be used to log to the hypervisor buffer */ static void send_buffers(struct port_info *pi) { HvLpEvent_Rc hvrc; int nextbuf; struct viocharlpevent *viochar; unsigned long flags; spin_lock_irqsave(&consolelock, flags); viochar = (struct viocharlpevent *) vio_get_event_buffer(viomajorsubtype_chario); /* Make sure we got a buffer */ if (viochar == NULL) { hvlog("\n\rviocons: Can't get viochar buffer in sendBuffers()."); spin_unlock_irqrestore(&consolelock, flags); return; } if (pi->used == 0) { hvlog("\n\rviocons: in sendbuffers(), but no buffers used.\n"); vio_free_event_buffer(viomajorsubtype_chario, viochar); spin_unlock_irqrestore(&consolelock, flags); return; } /* * curbuf points to the buffer we're filling. We want to * start sending AFTER this one. */ nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF; /* * Loop until we find a buffer with the used bit on */ while (test_bit(nextbuf, &pi->used) == 0) nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF; initDataEvent(viochar, pi->lp); /* * While we have buffers with data, and our send window * is open, send them */ while ((test_bit(nextbuf, &pi->used)) && ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { viochar->len = pi->bufferBytes[nextbuf]; viochar->event.xCorrelationToken = pi->seq++; viochar->event.xSizeMinus1 = offsetof(struct viocharlpevent, data) + viochar->len; memcpy(viochar->data, pi->buffer[nextbuf], viochar->len); hvrc = HvCallEvent_signalLpEvent(&viochar->event); if (hvrc) { /* * MUST unlock the spinlock before doing a printk */ vio_free_event_buffer(viomajorsubtype_chario, viochar); spin_unlock_irqrestore(&consolelock, flags); printk(VIOCONS_KERN_WARN "error sending event! return code %d\n", (int)hvrc); return; } /* * clear the used bit, zero the number of bytes in * this buffer, and move to the next buffer */ clear_bit(nextbuf, &pi->used); pi->bufferBytes[nextbuf] = 0; nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF; } /* * If we have emptied all the buffers, start at 0 again. * this will re-use any allocated buffers */ if (pi->used == 0) { pi->curbuf = 0; if (pi->overflowMessage) pi->overflowMessage = 0; if (pi->tty) { tty_wakeup(pi->tty); } } vio_free_event_buffer(viomajorsubtype_chario, viochar); spin_unlock_irqrestore(&consolelock, flags); } /* * Our internal writer. Gets called both from the console device and * the tty device. the tty pointer will be NULL if called from the console. * Return total number of bytes "written". * * NOTE: Don't use printk in here because it gets nastily recursive. hvlog * can be used to log to the hypervisor buffer */ static int internal_write(struct port_info *pi, const char *buf, size_t len) { HvLpEvent_Rc hvrc; size_t bleft; size_t curlen; const char *curbuf; unsigned long flags; struct viocharlpevent *viochar; /* * Write to the hvlog of inbound data are now done prior to * calling internal_write() since internal_write() is only called in * the event that an lp event path is active, which isn't the case for * logging attempts prior to console initialization. * * If there is already data queued for this port, send it prior to * attempting to send any new data. */ if (pi->used) send_buffers(pi); spin_lock_irqsave(&consolelock, flags); viochar = vio_get_event_buffer(viomajorsubtype_chario); if (viochar == NULL) { spin_unlock_irqrestore(&consolelock, flags); hvlog("\n\rviocons: Can't get vio buffer in internal_write()."); return -EAGAIN; } initDataEvent(viochar, pi->lp); curbuf = buf; bleft = len; while ((bleft > 0) && (pi->used == 0) && ((pi->seq - pi->ack) < VIOCHAR_WINDOW)) { if (bleft > VIOCHAR_MAX_DATA) curlen = VIOCHAR_MAX_DATA; else curlen = bleft; viochar->event.xCorrelationToken = pi->seq++; memcpy(viochar->data, curbuf, curlen); viochar->len = curlen; viochar->event.xSizeMinus1 = offsetof(struct viocharlpevent, data) + curlen; hvrc = HvCallEvent_signalLpEvent(&viochar->event); if (hvrc) { hvlog("viocons: error sending event! %d\n", (int)hvrc); goto out; } curbuf += curlen; bleft -= curlen; } /* If we didn't send it all, buffer as much of it as we can. */ if (bleft > 0) bleft -= buffer_add(pi, curbuf, bleft); out: vio_free_event_buffer(viomajorsubtype_chario, viochar); spin_unlock_irqrestore(&consolelock, flags); return len - bleft; } static struct port_info *get_port_data(struct tty_struct *tty) { unsigned long flags; struct port_info *pi; spin_lock_irqsave(&consolelock, flags); if (tty) { pi = (struct port_info *)tty->driver_data; if (!pi || viotty_paranoia_check(pi, tty->name, "get_port_data")) { pi = NULL; } } else /* * If this is the console device, use the lp from * the first port entry */ pi = &port_info[0]; spin_unlock_irqrestore(&consolelock, flags); return pi; } /* * Initialize the common fields in a charLpEvent */ static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp) { struct HvLpEvent *hev = &viochar->event; memset(viochar, 0, sizeof(struct viocharlpevent)); hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK | HV_LP_EVENT_INT; hev->xType = HvLpEvent_Type_VirtualIo; hev->xSubtype = viomajorsubtype_chario | viochardata; hev->xSourceLp = HvLpConfig_getLpIndex(); hev->xTargetLp = lp; hev->xSizeMinus1 = sizeof(struct viocharlpevent); hev->xSourceInstanceId = viopath_sourceinst(lp); hev->xTargetInstanceId = viopath_targetinst(lp); } /* * early console device write */ static void viocons_write_early(struct console *co, const char *s, unsigned count) { hvlogOutput(s, count); } /* * console device write */ static void viocons_write(struct console *co, const char *s, unsigned count) { int index; int begin; struct port_info *pi; static const char cr = '\r'; /* * Check port data first because the target LP might be valid but * simply not active, in which case we want to hvlog the output. */ pi = get_port_data(NULL); if (pi == NULL) { hvlog("\n\rviocons_write: unable to get port data."); return; } hvlogOutput(s, count); if (!viopath_isactive(pi->lp)) return; /* * Any newline character found will cause a * carriage return character to be emitted as well. */ begin = 0; for (index = 0; index < count; index++) { if (s[index] == '\n') { /* * Newline found. Print everything up to and * including the newline */ internal_write(pi, &s[begin], index - begin + 1); begin = index + 1; /* Emit a carriage return as well */ internal_write(pi, &cr, 1); } } /* If any characters left to write, write them now */ if ((index - begin) > 0) internal_write(pi, &s[begin], index - begin); } /* * Work out the device associate with this console */ static struct tty_driver *viocons_device(struct console *c, int *index) { *index = c->index; return viotty_driver; } /* * console device I/O methods */ static struct console viocons_early = { .name = "viocons", .write = viocons_write_early, .flags = CON_PRINTBUFFER, .index = -1, }; static struct console viocons = { .name = "viocons", .write = viocons_write, .device = viocons_device, .flags = CON_PRINTBUFFER, .index = -1, }; /* * TTY Open method */ static int viotty_open(struct tty_struct *tty, struct file *filp) { int port; unsigned long flags; struct port_info *pi; port = tty->index; if ((port < 0) || (port >= VTTY_PORTS)) return -ENODEV; spin_lock_irqsave(&consolelock, flags); pi = &port_info[port]; /* If some other TTY is already connected here, reject the open */ if ((pi->tty) && (pi->tty != tty)) { spin_unlock_irqrestore(&consolelock, flags); printk(VIOCONS_KERN_WARN "attempt to open device twice from different ttys\n"); return -EBUSY; } tty->driver_data = pi; pi->tty = tty; spin_unlock_irqrestore(&consolelock, flags); return 0; } /* * TTY Close method */ static void viotty_close(struct tty_struct *tty, struct file *filp) { unsigned long flags; struct port_info *pi; spin_lock_irqsave(&consolelock, flags); pi = (struct port_info *)tty->driver_data; if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_close")) { spin_unlock_irqrestore(&consolelock, flags); return; } if (tty->count == 1) pi->tty = NULL; spin_unlock_irqrestore(&consolelock, flags); } /* * TTY Write method */ static int viotty_write(struct tty_struct *tty, const unsigned char *buf, int count) { struct port_info *pi; pi = get_port_data(tty); if (pi == NULL) { hvlog("\n\rviotty_write: no port data."); return -ENODEV; } if (viochar_is_console(pi)) hvlogOutput(buf, count); /* * If the path to this LP is closed, don't bother doing anything more. * just dump the data on the floor and return count. For some reason * some user level programs will attempt to probe available tty's and * they'll attempt a viotty_write on an invalid port which maps to an * invalid target lp. If this is the case then ignore the * viotty_write call and, since the viopath isn't active to this * partition, return count. */ if (!viopath_isactive(pi->lp)) return count; return internal_write(pi, buf, count); } /* * TTY put_char method */ static void viotty_put_char(struct tty_struct *tty, unsigned char ch) { struct port_info *pi; pi = get_port_data(tty); if (pi == NULL) return; /* This will append '\r' as well if the char is '\n' */ if (viochar_is_console(pi)) hvlogOutput(&ch, 1); if (viopath_isactive(pi->lp)) internal_write(pi, &ch, 1); } /* * TTY write_room method */ static int viotty_write_room(struct tty_struct *tty) { int i; int room = 0; struct port_info *pi; unsigned long flags; spin_lock_irqsave(&consolelock, flags); pi = (struct port_info *)tty->driver_data; if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_write_room")) { spin_unlock_irqrestore(&consolelock, flags); return 0; } /* If no buffers are used, return the max size. */ if (pi->used == 0) { spin_unlock_irqrestore(&consolelock, flags); return VIOCHAR_MAX_DATA * VIOCHAR_NUM_BUF; } /* * We retain the spinlock because we want to get an accurate * count and it can change on us between each operation if we * don't hold the spinlock. */ for (i = 0; ((i < VIOCHAR_NUM_BUF) && (room < VIOCHAR_MAX_DATA)); i++) room += (VIOCHAR_MAX_DATA - pi->bufferBytes[i]); spin_unlock_irqrestore(&consolelock, flags); if (room > VIOCHAR_MAX_DATA) room = VIOCHAR_MAX_DATA; return room; } /* * TTY chars_in_buffer method */ static int viotty_chars_in_buffer(struct tty_struct *tty) { return 0; } static int viotty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { switch (cmd) { /* * the ioctls below read/set the flags usually shown in the leds * don't use them - they will go away without warning */ case KDGETLED: case KDGKBLED: return put_user(0, (char *)arg); case KDSKBLED: return 0; } /* FIXME: WTF is this being called for ??? */ lock_kernel(); ret = n_tty_ioctl(tty, file, cmd, arg); unlock_kernel(); return ret; } /* * Handle an open charLpEvent. Could be either interrupt or ack */ static void vioHandleOpenEvent(struct HvLpEvent *event) { unsigned long flags; struct viocharlpevent *cevent = (struct viocharlpevent *)event; u8 port = cevent->virtual_device; struct port_info *pi; int reject = 0; if (hvlpevent_is_ack(event)) { if (port >= VTTY_PORTS) return; spin_lock_irqsave(&consolelock, flags); /* Got the lock, don't cause console output */ pi = &port_info[port]; if (event->xRc == HvLpEvent_Rc_Good) { pi->seq = pi->ack = 0; /* * This line allows connections from the primary * partition but once one is connected from the * primary partition nothing short of a reboot * of linux will allow access from the hosting * partition again without a required iSeries fix. */ pi->lp = event->xTargetLp; } spin_unlock_irqrestore(&consolelock, flags); if (event->xRc != HvLpEvent_Rc_Good) printk(VIOCONS_KERN_WARN "handle_open_event: event->xRc == (%d).\n", event->xRc); if (event->xCorrelationToken != 0) { atomic_t *aptr= (atomic_t *)event->xCorrelationToken; atomic_set(aptr, 1); } else printk(VIOCONS_KERN_WARN "weird...got open ack without atomic\n"); return; } /* This had better require an ack, otherwise complain */ if (!hvlpevent_need_ack(event)) { printk(VIOCONS_KERN_WARN "viocharopen without ack bit!\n"); return; } spin_lock_irqsave(&consolelock, flags); /* Got the lock, don't cause console output */ /* Make sure this is a good virtual tty */ if (port >= VTTY_PORTS) { event->xRc = HvLpEvent_Rc_SubtypeError; cevent->subtype_result_code = viorc_openRejected; /* * Flag state here since we can't printk while holding * a spinlock. */ reject = 1; } else { pi = &port_info[port]; if ((pi->lp != HvLpIndexInvalid) && (pi->lp != event->xSourceLp)) { /* * If this is tty is already connected to a different * partition, fail. */ event->xRc = HvLpEvent_Rc_SubtypeError; cevent->subtype_result_code = viorc_openRejected; reject = 2; } else { pi->lp = event->xSourceLp; event->xRc = HvLpEvent_Rc_Good; cevent->subtype_result_code = viorc_good; pi->seq = pi->ack = 0; reject = 0; } } spin_unlock_irqrestore(&consolelock, flags); if (reject == 1) printk(VIOCONS_KERN_WARN "open rejected: bad virtual tty.\n"); else if (reject == 2) printk(VIOCONS_KERN_WARN "open rejected: console in exclusive use by another partition.\n"); /* Return the acknowledgement */ HvCallEvent_ackLpEvent(event); } /* * Handle a close charLpEvent. This should ONLY be an Interrupt because the * virtual console should never actually issue a close event to the hypervisor * because the virtual console never goes away. A close event coming from the * hypervisor simply means that there are no client consoles connected to the * virtual console. * * Regardless of the number of connections masqueraded on the other side of * the hypervisor ONLY ONE close event should be called to accompany the ONE * open event that is called. The close event should ONLY be called when NO * MORE connections (masqueraded or not) exist on the other side of the * hypervisor. */ static void vioHandleCloseEvent(struct HvLpEvent *event) { unsigned long flags; struct viocharlpevent *cevent = (struct viocharlpevent *)event; u8 port = cevent->virtual_device; if (hvlpevent_is_int(event)) { if (port >= VTTY_PORTS) { printk(VIOCONS_KERN_WARN "close message from invalid virtual device.\n"); return; } /* For closes, just mark the console partition invalid */ spin_lock_irqsave(&consolelock, flags); /* Got the lock, don't cause console output */ if (port_info[port].lp == event->xSourceLp) port_info[port].lp = HvLpIndexInvalid; spin_unlock_irqrestore(&consolelock, flags); printk(VIOCONS_KERN_INFO "close from %d\n", event->xSourceLp); } else printk(VIOCONS_KERN_WARN "got unexpected close acknowlegement\n"); } /* * Handle a config charLpEvent. Could be either interrupt or ack */ static void vioHandleConfig(struct HvLpEvent *event) { struct viocharlpevent *cevent = (struct viocharlpevent *)event; HvCall_writeLogBuffer(cevent->data, cevent->len); if (cevent->data[0] == 0x01) printk(VIOCONS_KERN_INFO "window resized to %d: %d: %d: %d\n", cevent->data[1], cevent->data[2], cevent->data[3], cevent->data[4]); else printk(VIOCONS_KERN_WARN "unknown config event\n"); } /* * Handle a data charLpEvent. */ static void vioHandleData(struct HvLpEvent *event) { struct tty_struct *tty; unsigned long flags; struct viocharlpevent *cevent = (struct viocharlpevent *)event; struct port_info *pi; int index; int num_pushed; u8 port = cevent->virtual_device; if (port >= VTTY_PORTS) { printk(VIOCONS_KERN_WARN "data on invalid virtual device %d\n", port); return; } /* * Hold the spinlock so that we don't take an interrupt that * changes tty between the time we fetch the port_info * pointer and the time we paranoia check. */ spin_lock_irqsave(&consolelock, flags); pi = &port_info[port]; /* * Change 05/01/2003 - Ryan Arnold: If a partition other than * the current exclusive partition tries to send us data * events then just drop them on the floor because we don't * want his stinking data. He isn't authorized to receive * data because he wasn't the first one to get the console, * therefore he shouldn't be allowed to send data either. * This will work without an iSeries fix. */ if (pi->lp != event->xSourceLp) { spin_unlock_irqrestore(&consolelock, flags); return; } tty = pi->tty; if (tty == NULL) { spin_unlock_irqrestore(&consolelock, flags); printk(VIOCONS_KERN_WARN "no tty for virtual device %d\n", port); return; } if (tty->magic != TTY_MAGIC) { spin_unlock_irqrestore(&consolelock, flags); printk(VIOCONS_KERN_WARN "tty bad magic\n"); return; } /* * Just to be paranoid, make sure the tty points back to this port */ pi = (struct port_info *)tty->driver_data; if (!pi || viotty_paranoia_check(pi, tty->name, "vioHandleData")) { spin_unlock_irqrestore(&consolelock, flags); return; } spin_unlock_irqrestore(&consolelock, flags); /* * Change 07/21/2003 - Ryan Arnold: functionality added to * support sysrq utilizing ^O as the sysrq key. The sysrq * functionality will only work if built into the kernel and * then only if sysrq is enabled through the proc filesystem. */ num_pushed = 0; for (index = 0; index < cevent->len; index++) { /* * Will be optimized away if !CONFIG_MAGIC_SYSRQ: */ if (sysrq_on()) { /* 0x0f is the ascii character for ^O */ if (cevent->data[index] == '\x0f') { vio_sysrq_pressed = 1; /* * continue because we don't want to add * the sysrq key into the data string. */ continue; } else if (vio_sysrq_pressed) { handle_sysrq(cevent->data[index], tty); vio_sysrq_pressed = 0; /* * continue because we don't want to add * the sysrq sequence into the data string. */ continue; } } /* * The sysrq sequence isn't included in this check if * sysrq is enabled and compiled into the kernel because * the sequence will never get inserted into the buffer. * Don't attempt to copy more data into the buffer than we * have room for because it would fail without indication. */ if(tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL) == 0) { printk(VIOCONS_KERN_WARN "input buffer overflow!\n"); break; } num_pushed++; } if (num_pushed) tty_flip_buffer_push(tty); } /* * Handle an ack charLpEvent. */ static void vioHandleAck(struct HvLpEvent *event) { struct viocharlpevent *cevent = (struct viocharlpevent *)event; unsigned long flags; u8 port = cevent->virtual_device; if (port >= VTTY_PORTS) { printk(VIOCONS_KERN_WARN "data on invalid virtual device\n"); return; } spin_lock_irqsave(&consolelock, flags); port_info[port].ack = event->xCorrelationToken; spin_unlock_irqrestore(&consolelock, flags); if (port_info[port].used) send_buffers(&port_info[port]); } /* * Handle charLpEvents and route to the appropriate routine */ static void vioHandleCharEvent(struct HvLpEvent *event) { int charminor; if (event == NULL) return; charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; switch (charminor) { case viocharopen: vioHandleOpenEvent(event); break; case viocharclose: vioHandleCloseEvent(event); break; case viochardata: vioHandleData(event); break; case viocharack: vioHandleAck(event); break; case viocharconfig: vioHandleConfig(event); break; default: if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) { event->xRc = HvLpEvent_Rc_InvalidSubtype; HvCallEvent_ackLpEvent(event); } } } /* * Send an open event */ static int send_open(HvLpIndex remoteLp, void *sem) { return HvCallEvent_signalLpEventFast(remoteLp, HvLpEvent_Type_VirtualIo, viomajorsubtype_chario | viocharopen, HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, viopath_sourceinst(remoteLp), viopath_targetinst(remoteLp), (u64)(unsigned long)sem, VIOVERSION << 16, 0, 0, 0, 0); } static const struct tty_operations serial_ops = { .open = viotty_open, .close = viotty_close, .write = viotty_write, .put_char = viotty_put_char, .write_room = viotty_write_room, .chars_in_buffer = viotty_chars_in_buffer, .ioctl = viotty_ioctl, }; static int __init viocons_init2(void) { atomic_t wait_flag; int rc; if (!firmware_has_feature(FW_FEATURE_ISERIES)) return -ENODEV; /* +2 for fudge */ rc = viopath_open(HvLpConfig_getPrimaryLpIndex(), viomajorsubtype_chario, VIOCHAR_WINDOW + 2); if (rc) printk(VIOCONS_KERN_WARN "error opening to primary %d\n", rc); if (viopath_hostLp == HvLpIndexInvalid) vio_set_hostlp(); /* * And if the primary is not the same as the hosting LP, open to the * hosting lp */ if ((viopath_hostLp != HvLpIndexInvalid) && (viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) { printk(VIOCONS_KERN_INFO "open path to hosting (%d)\n", viopath_hostLp); rc = viopath_open(viopath_hostLp, viomajorsubtype_chario, VIOCHAR_WINDOW + 2); /* +2 for fudge */ if (rc) printk(VIOCONS_KERN_WARN "error opening to partition %d: %d\n", viopath_hostLp, rc); } if (vio_setHandler(viomajorsubtype_chario, vioHandleCharEvent) < 0) printk(VIOCONS_KERN_WARN "error seting handler for console events!\n"); /* * First, try to open the console to the hosting lp. * Wait on a semaphore for the response. */ atomic_set(&wait_flag, 0); if ((viopath_isactive(viopath_hostLp)) && (send_open(viopath_hostLp, (void *)&wait_flag) == 0)) { printk(VIOCONS_KERN_INFO "hosting partition %d\n", viopath_hostLp); while (atomic_read(&wait_flag) == 0) mb(); atomic_set(&wait_flag, 0); } /* * If we don't have an active console, try the primary */ if ((!viopath_isactive(port_info[0].lp)) && (viopath_isactive(HvLpConfig_getPrimaryLpIndex())) && (send_open(HvLpConfig_getPrimaryLpIndex(), (void *)&wait_flag) == 0)) { printk(VIOCONS_KERN_INFO "opening console to primary partition\n"); while (atomic_read(&wait_flag) == 0) mb(); } /* Initialize the tty_driver structure */ viotty_driver = alloc_tty_driver(VTTY_PORTS); viotty_driver->owner = THIS_MODULE; viotty_driver->driver_name = "vioconsole"; viotty_driver->name = "tty"; viotty_driver->name_base = 1; viotty_driver->major = TTY_MAJOR; viotty_driver->minor_start = 1; viotty_driver->type = TTY_DRIVER_TYPE_CONSOLE; viotty_driver->subtype = 1; viotty_driver->init_termios = tty_std_termios; viotty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; tty_set_operations(viotty_driver, &serial_ops); if (tty_register_driver(viotty_driver)) { printk(VIOCONS_KERN_WARN "couldn't register console driver\n"); put_tty_driver(viotty_driver); viotty_driver = NULL; } unregister_console(&viocons_early); register_console(&viocons); return 0; } static int __init viocons_init(void) { int i; if (!firmware_has_feature(FW_FEATURE_ISERIES)) return -ENODEV; printk(VIOCONS_KERN_INFO "registering console\n"); for (i = 0; i < VTTY_PORTS; i++) { port_info[i].lp = HvLpIndexInvalid; port_info[i].magic = VIOTTY_MAGIC; } HvCall_setLogBufferFormatAndCodepage(HvCall_LogBuffer_ASCII, 437); add_preferred_console("viocons", 0, NULL); register_console(&viocons_early); return 0; } console_initcall(viocons_init); module_init(viocons_init2);