/* * linux/arch/alpha/kernel/sys_jensen.c * * Copyright (C) 1995 Linus Torvalds * Copyright (C) 1998, 1999 Richard Henderson * * Code supporting the Jensen. */ #include #include #include #include #include #include #include #include #define __EXTERN_INLINE inline #include #include #undef __EXTERN_INLINE #include #include #include #include #include #include "proto.h" #include "irq_impl.h" #include "pci_impl.h" #include "machvec_impl.h" /* * Jensen is special: the vector is 0x8X0 for EISA interrupt X, and * 0x9X0 for the local motherboard interrupts. * * Note especially that those local interrupts CANNOT be masked, * which causes much of the pain below... * * 0x660 - NMI * * 0x800 - IRQ0 interval timer (not used, as we use the RTC timer) * 0x810 - IRQ1 line printer (duh..) * 0x860 - IRQ6 floppy disk * * 0x900 - COM1 * 0x920 - COM2 * 0x980 - keyboard * 0x990 - mouse * * PCI-based systems are more sane: they don't have the local * interrupts at all, and have only normal PCI interrupts from * devices. Happily it's easy enough to do a sane mapping from the * Jensen. * * Note that this means that we may have to do a hardware * "local_op" to a different interrupt than we report to the rest of the * world. */ static unsigned int jensen_local_startup(unsigned int irq) { /* the parport is really hw IRQ 1, silly Jensen. */ if (irq == 7) i8259a_startup_irq(1); else /* * For all true local interrupts, set the flag that prevents * the IPL from being dropped during handler processing. */ if (irq_desc[irq].action) irq_desc[irq].action->flags |= IRQF_DISABLED; return 0; } static void jensen_local_shutdown(unsigned int irq) { /* the parport is really hw IRQ 1, silly Jensen. */ if (irq == 7) i8259a_disable_irq(1); } static void jensen_local_enable(unsigned int irq) { /* the parport is really hw IRQ 1, silly Jensen. */ if (irq == 7) i8259a_enable_irq(1); } static void jensen_local_disable(unsigned int irq) { /* the parport is really hw IRQ 1, silly Jensen. */ if (irq == 7) i8259a_disable_irq(1); } static void jensen_local_ack(unsigned int irq) { /* the parport is really hw IRQ 1, silly Jensen. */ if (irq == 7) i8259a_mask_and_ack_irq(1); } static void jensen_local_end(unsigned int irq) { /* the parport is really hw IRQ 1, silly Jensen. */ if (irq == 7) i8259a_end_irq(1); } static struct hw_interrupt_type jensen_local_irq_type = { .typename = "LOCAL", .startup = jensen_local_startup, .shutdown = jensen_local_shutdown, .enable = jensen_local_enable, .disable = jensen_local_disable, .ack = jensen_local_ack, .end = jensen_local_end, }; static void jensen_device_interrupt(unsigned long vector) { int irq; switch (vector) { case 0x660: printk("Whee.. NMI received. Probable hardware error\n"); printk("61=%02x, 461=%02x\n", inb(0x61), inb(0x461)); return; /* local device interrupts: */ case 0x900: irq = 4; break; /* com1 -> irq 4 */ case 0x920: irq = 3; break; /* com2 -> irq 3 */ case 0x980: irq = 1; break; /* kbd -> irq 1 */ case 0x990: irq = 9; break; /* mouse -> irq 9 */ default: if (vector > 0x900) { printk("Unknown local interrupt %lx\n", vector); return; } irq = (vector - 0x800) >> 4; if (irq == 1) irq = 7; break; } /* If there is no handler yet... */ if (irq_desc[irq].action == NULL) { /* If it is a local interrupt that cannot be masked... */ if (vector >= 0x900) { /* Clear keyboard/mouse state */ inb(0x64); inb(0x60); /* Reset serial ports */ inb(0x3fa); inb(0x2fa); outb(0x0c, 0x3fc); outb(0x0c, 0x2fc); /* Clear NMI */ outb(0,0x61); outb(0,0x461); } } #if 0 /* A useful bit of code to find out if an interrupt is going wild. */ { static unsigned int last_msg = 0, last_cc = 0; static int last_irq = -1, count = 0; unsigned int cc; __asm __volatile("rpcc %0" : "=r"(cc)); ++count; #define JENSEN_CYCLES_PER_SEC (150000000) if (cc - last_msg > ((JENSEN_CYCLES_PER_SEC) * 3) || irq != last_irq) { printk(KERN_CRIT " irq %d count %d cc %u @ %lx\n", irq, count, cc-last_cc, get_irq_regs()->pc); count = 0; last_msg = cc; last_irq = irq; } last_cc = cc; } #endif handle_irq(irq); } static void __init jensen_init_irq(void) { init_i8259a_irqs(); irq_desc[1].chip = &jensen_local_irq_type; irq_desc[4].chip = &jensen_local_irq_type; irq_desc[3].chip = &jensen_local_irq_type; irq_desc[7].chip = &jensen_local_irq_type; irq_desc[9].chip = &jensen_local_irq_type; common_init_isa_dma(); } static void __init jensen_init_arch(void) { struct pci_controller *hose; #ifdef CONFIG_PCI static struct pci_dev fake_isa_bridge = { .dma_mask = 0xffffffffUL, }; isa_bridge = &fake_isa_bridge; #endif /* Create a hose so that we can report i/o base addresses to userland. */ pci_isa_hose = hose = alloc_pci_controller(); hose->io_space = &ioport_resource; hose->mem_space = &iomem_resource; hose->index = 0; hose->sparse_mem_base = EISA_MEM - IDENT_ADDR; hose->dense_mem_base = 0; hose->sparse_io_base = EISA_IO - IDENT_ADDR; hose->dense_io_base = 0; hose->sg_isa = hose->sg_pci = NULL; __direct_map_base = 0; __direct_map_size = 0xffffffff; } static void jensen_machine_check (u64 vector, u64 la, struct pt_regs *regs) { printk(KERN_CRIT "Machine check\n"); } /* * The System Vector */ struct alpha_machine_vector jensen_mv __initmv = { .vector_name = "Jensen", DO_EV4_MMU, IO_LITE(JENSEN,jensen), .machine_check = jensen_machine_check, .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, .rtc_port = 0x170, .nr_irqs = 16, .device_interrupt = jensen_device_interrupt, .init_arch = jensen_init_arch, .init_irq = jensen_init_irq, .init_rtc = common_init_rtc, .init_pci = NULL, .kill_arch = NULL, }; ALIAS_MV(jensen)