/****************************************************************************** * * Module Name: evxfevnt - External Interfaces, ACPI event disable/enable * *****************************************************************************/ /* * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include <acpi/acpi.h> #include <acpi/acevents.h> #include <acpi/acnamesp.h> #include <acpi/actables.h> #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evxfevnt") /******************************************************************************* * * FUNCTION: acpi_enable * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Transfers the system into ACPI mode. * ******************************************************************************/ acpi_status acpi_enable(void) { acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(acpi_enable); /* ACPI tables must be present */ if (!acpi_tb_tables_loaded()) { return_ACPI_STATUS(AE_NO_ACPI_TABLES); } /* Check current mode */ if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) { ACPI_DEBUG_PRINT((ACPI_DB_INIT, "System is already in ACPI mode\n")); } else { /* Transition to ACPI mode */ status = acpi_hw_set_mode(ACPI_SYS_MODE_ACPI); if (ACPI_FAILURE(status)) { ACPI_ERROR((AE_INFO, "Could not transition to ACPI mode")); return_ACPI_STATUS(status); } ACPI_DEBUG_PRINT((ACPI_DB_INIT, "Transition to ACPI mode successful\n")); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_enable) /******************************************************************************* * * FUNCTION: acpi_disable * * PARAMETERS: None * * RETURN: Status * * DESCRIPTION: Transfers the system into LEGACY (non-ACPI) mode. * ******************************************************************************/ acpi_status acpi_disable(void) { acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(acpi_disable); if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) { ACPI_DEBUG_PRINT((ACPI_DB_INIT, "System is already in legacy (non-ACPI) mode\n")); } else { /* Transition to LEGACY mode */ status = acpi_hw_set_mode(ACPI_SYS_MODE_LEGACY); if (ACPI_FAILURE(status)) { ACPI_ERROR((AE_INFO, "Could not exit ACPI mode to legacy mode")); return_ACPI_STATUS(status); } ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI mode disabled\n")); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_disable) /******************************************************************************* * * FUNCTION: acpi_enable_event * * PARAMETERS: Event - The fixed eventto be enabled * Flags - Reserved * * RETURN: Status * * DESCRIPTION: Enable an ACPI event (fixed) * ******************************************************************************/ acpi_status acpi_enable_event(u32 event, u32 flags) { acpi_status status = AE_OK; u32 value; ACPI_FUNCTION_TRACE(acpi_enable_event); /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { return_ACPI_STATUS(AE_BAD_PARAMETER); } /* * Enable the requested fixed event (by writing a one to the * enable register bit) */ status = acpi_set_register(acpi_gbl_fixed_event_info[event]. enable_register_id, 1); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Make sure that the hardware responded */ status = acpi_get_register(acpi_gbl_fixed_event_info[event]. enable_register_id, &value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } if (value != 1) { ACPI_ERROR((AE_INFO, "Could not enable %s event", acpi_ut_get_event_name(event))); return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_enable_event) /******************************************************************************* * * FUNCTION: acpi_set_gpe_type * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block * Type - New GPE type * * RETURN: Status * * DESCRIPTION: Set the type of an individual GPE * ******************************************************************************/ acpi_status acpi_set_gpe_type(acpi_handle gpe_device, u32 gpe_number, u8 type) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_set_gpe_type); /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } if ((gpe_event_info->flags & ACPI_GPE_TYPE_MASK) == type) { return_ACPI_STATUS(AE_OK); } /* Set the new type (will disable GPE if currently enabled) */ status = acpi_ev_set_gpe_type(gpe_event_info, type); unlock_and_exit: return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_set_gpe_type) /******************************************************************************* * * FUNCTION: acpi_enable_gpe * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block * Flags - Just enable, or also wake enable? * Called from ISR or not * * RETURN: Status * * DESCRIPTION: Enable an ACPI event (general purpose) * ******************************************************************************/ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_enable_gpe); /* Use semaphore lock if not executing at interrupt level */ if (flags & ACPI_NOT_ISR) { status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } /* Perform the enable */ status = acpi_ev_enable_gpe(gpe_event_info, TRUE); unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_enable_gpe) /******************************************************************************* * * FUNCTION: acpi_disable_gpe * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block * Flags - Just disable, or also wake disable? * Called from ISR or not * * RETURN: Status * * DESCRIPTION: Disable an ACPI event (general purpose) * ******************************************************************************/ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_disable_gpe); /* Use semaphore lock if not executing at interrupt level */ if (flags & ACPI_NOT_ISR) { status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } status = acpi_ev_disable_gpe(gpe_event_info); unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_disable_gpe) /******************************************************************************* * * FUNCTION: acpi_disable_event * * PARAMETERS: Event - The fixed eventto be enabled * Flags - Reserved * * RETURN: Status * * DESCRIPTION: Disable an ACPI event (fixed) * ******************************************************************************/ acpi_status acpi_disable_event(u32 event, u32 flags) { acpi_status status = AE_OK; u32 value; ACPI_FUNCTION_TRACE(acpi_disable_event); /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { return_ACPI_STATUS(AE_BAD_PARAMETER); } /* * Disable the requested fixed event (by writing a zero to the * enable register bit) */ status = acpi_set_register(acpi_gbl_fixed_event_info[event]. enable_register_id, 0); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } status = acpi_get_register(acpi_gbl_fixed_event_info[event]. enable_register_id, &value); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } if (value != 0) { ACPI_ERROR((AE_INFO, "Could not disable %s events", acpi_ut_get_event_name(event))); return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_disable_event) /******************************************************************************* * * FUNCTION: acpi_clear_event * * PARAMETERS: Event - The fixed event to be cleared * * RETURN: Status * * DESCRIPTION: Clear an ACPI event (fixed) * ******************************************************************************/ acpi_status acpi_clear_event(u32 event) { acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(acpi_clear_event); /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { return_ACPI_STATUS(AE_BAD_PARAMETER); } /* * Clear the requested fixed event (By writing a one to the * status register bit) */ status = acpi_set_register(acpi_gbl_fixed_event_info[event]. status_register_id, 1); return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_clear_event) /******************************************************************************* * * FUNCTION: acpi_clear_gpe * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block * Flags - Called from an ISR or not * * RETURN: Status * * DESCRIPTION: Clear an ACPI event (general purpose) * ******************************************************************************/ acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number, u32 flags) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_clear_gpe); /* Use semaphore lock if not executing at interrupt level */ if (flags & ACPI_NOT_ISR) { status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } status = acpi_hw_clear_gpe(gpe_event_info); unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_clear_gpe) #ifdef ACPI_FUTURE_USAGE /******************************************************************************* * * FUNCTION: acpi_get_event_status * * PARAMETERS: Event - The fixed event * event_status - Where the current status of the event will * be returned * * RETURN: Status * * DESCRIPTION: Obtains and returns the current status of the event * ******************************************************************************/ acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status) { acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(acpi_get_event_status); if (!event_status) { return_ACPI_STATUS(AE_BAD_PARAMETER); } /* Decode the Fixed Event */ if (event > ACPI_EVENT_MAX) { return_ACPI_STATUS(AE_BAD_PARAMETER); } /* Get the status of the requested fixed event */ status = acpi_get_register(acpi_gbl_fixed_event_info[event]. status_register_id, event_status); return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_get_event_status) /******************************************************************************* * * FUNCTION: acpi_get_gpe_status * * PARAMETERS: gpe_device - Parent GPE Device * gpe_number - GPE level within the GPE block * Flags - Called from an ISR or not * event_status - Where the current status of the event will * be returned * * RETURN: Status * * DESCRIPTION: Get status of an event (general purpose) * ******************************************************************************/ acpi_status acpi_get_gpe_status(acpi_handle gpe_device, u32 gpe_number, u32 flags, acpi_event_status * event_status) { acpi_status status = AE_OK; struct acpi_gpe_event_info *gpe_event_info; ACPI_FUNCTION_TRACE(acpi_get_gpe_status); /* Use semaphore lock if not executing at interrupt level */ if (flags & ACPI_NOT_ISR) { status = acpi_ut_acquire_mutex(ACPI_MTX_EVENTS); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } /* Ensure that we have a valid GPE number */ gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number); if (!gpe_event_info) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } /* Obtain status on the requested GPE number */ status = acpi_hw_get_gpe_status(gpe_event_info, event_status); unlock_and_exit: if (flags & ACPI_NOT_ISR) { (void)acpi_ut_release_mutex(ACPI_MTX_EVENTS); } return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_get_gpe_status) #endif /* ACPI_FUTURE_USAGE */ /******************************************************************************* * * FUNCTION: acpi_install_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE Block Device * gpe_block_address - Address and space_iD * register_count - Number of GPE register pairs in the block * interrupt_number - H/W interrupt for the block * * RETURN: Status * * DESCRIPTION: Create and Install a block of GPE registers * ******************************************************************************/ acpi_status acpi_install_gpe_block(acpi_handle gpe_device, struct acpi_generic_address *gpe_block_address, u32 register_count, u32 interrupt_number) { acpi_status status; union acpi_operand_object *obj_desc; struct acpi_namespace_node *node; struct acpi_gpe_block_info *gpe_block; ACPI_FUNCTION_TRACE(acpi_install_gpe_block); if ((!gpe_device) || (!gpe_block_address) || (!register_count)) { return_ACPI_STATUS(AE_BAD_PARAMETER); } status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { return (status); } node = acpi_ns_map_handle_to_node(gpe_device); if (!node) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } /* * For user-installed GPE Block Devices, the gpe_block_base_number * is always zero */ status = acpi_ev_create_gpe_block(node, gpe_block_address, register_count, 0, interrupt_number, &gpe_block); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } /* Run the _PRW methods and enable the GPEs */ status = acpi_ev_initialize_gpe_block(node, gpe_block); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } /* Get the device_object attached to the node */ obj_desc = acpi_ns_get_attached_object(node); if (!obj_desc) { /* No object, create a new one */ obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_DEVICE); if (!obj_desc) { status = AE_NO_MEMORY; goto unlock_and_exit; } status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_DEVICE); /* Remove local reference to the object */ acpi_ut_remove_reference(obj_desc); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } } /* Install the GPE block in the device_object */ obj_desc->device.gpe_block = gpe_block; unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_install_gpe_block) /******************************************************************************* * * FUNCTION: acpi_remove_gpe_block * * PARAMETERS: gpe_device - Handle to the parent GPE Block Device * * RETURN: Status * * DESCRIPTION: Remove a previously installed block of GPE registers * ******************************************************************************/ acpi_status acpi_remove_gpe_block(acpi_handle gpe_device) { union acpi_operand_object *obj_desc; acpi_status status; struct acpi_namespace_node *node; ACPI_FUNCTION_TRACE(acpi_remove_gpe_block); if (!gpe_device) { return_ACPI_STATUS(AE_BAD_PARAMETER); } status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); if (ACPI_FAILURE(status)) { return (status); } node = acpi_ns_map_handle_to_node(gpe_device); if (!node) { status = AE_BAD_PARAMETER; goto unlock_and_exit; } /* Get the device_object attached to the node */ obj_desc = acpi_ns_get_attached_object(node); if (!obj_desc || !obj_desc->device.gpe_block) { return_ACPI_STATUS(AE_NULL_OBJECT); } /* Delete the GPE block (but not the device_object) */ status = acpi_ev_delete_gpe_block(obj_desc->device.gpe_block); if (ACPI_SUCCESS(status)) { obj_desc->device.gpe_block = NULL; } unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); } ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)