/****************************************************************************** * * Module Name: exstore - AML Interpreter object store support * *****************************************************************************/ /* * Copyright (C) 2000 - 2007, R. Byron Moore * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include #include #include #include #include #define _COMPONENT ACPI_EXECUTER ACPI_MODULE_NAME("exstore") /* Local prototypes */ static void acpi_ex_do_debug_object(union acpi_operand_object *source_desc, u32 level, u32 index); static acpi_status acpi_ex_store_object_to_index(union acpi_operand_object *val_desc, union acpi_operand_object *dest_desc, struct acpi_walk_state *walk_state); /******************************************************************************* * * FUNCTION: acpi_ex_do_debug_object * * PARAMETERS: source_desc - Value to be stored * Level - Indentation level (used for packages) * Index - Current package element, zero if not pkg * * RETURN: None * * DESCRIPTION: Handles stores to the Debug Object. * ******************************************************************************/ static void acpi_ex_do_debug_object(union acpi_operand_object *source_desc, u32 level, u32 index) { u32 i; ACPI_FUNCTION_TRACE_PTR(ex_do_debug_object, source_desc); ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %*s", level, " ")); /* Display index for package output only */ if (index > 0) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "(%.2u) ", index - 1)); } if (!source_desc) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "\n")); return_VOID; } if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_OPERAND) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%s: ", acpi_ut_get_object_type_name (source_desc))); if (!acpi_ut_valid_internal_object(source_desc)) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%p, Invalid Internal Object!\n", source_desc)); return_VOID; } } else if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_NAMED) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%s: %p\n", acpi_ut_get_type_name(((struct acpi_namespace_node *)source_desc)-> type), source_desc)); return_VOID; } else { return_VOID; } /* source_desc is of type ACPI_DESC_TYPE_OPERAND */ switch (ACPI_GET_OBJECT_TYPE(source_desc)) { case ACPI_TYPE_INTEGER: /* Output correct integer width */ if (acpi_gbl_integer_byte_width == 4) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n", (u32) source_desc->integer. value)); } else { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "0x%8.8X%8.8X\n", ACPI_FORMAT_UINT64(source_desc-> integer. value))); } break; case ACPI_TYPE_BUFFER: ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]\n", (u32) source_desc->buffer.length)); ACPI_DUMP_BUFFER(source_desc->buffer.pointer, (source_desc->buffer.length < 256) ? source_desc->buffer.length : 256); break; case ACPI_TYPE_STRING: ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n", source_desc->string.length, source_desc->string.pointer)); break; case ACPI_TYPE_PACKAGE: ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X Elements]\n", source_desc->package.count)); /* Output the entire contents of the package */ for (i = 0; i < source_desc->package.count; i++) { acpi_ex_do_debug_object(source_desc->package. elements[i], level + 4, i + 1); } break; case ACPI_TYPE_LOCAL_REFERENCE: if (source_desc->reference.opcode == AML_INDEX_OP) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[%s, 0x%X]\n", acpi_ps_get_opcode_name (source_desc->reference.opcode), source_desc->reference.offset)); } else { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[%s]", acpi_ps_get_opcode_name (source_desc->reference.opcode))); } if (source_desc->reference.opcode == AML_LOAD_OP) { /* Load and load_table */ ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, " Table OwnerId %p\n", source_desc->reference.object)); break; } ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "\n")); if (source_desc->reference.object) { if (ACPI_GET_DESCRIPTOR_TYPE (source_desc->reference.object) == ACPI_DESC_TYPE_NAMED) { acpi_ex_do_debug_object(((struct acpi_namespace_node *) source_desc->reference. object)->object, level + 4, 0); } else { acpi_ex_do_debug_object(source_desc->reference. object, level + 4, 0); } } else if (source_desc->reference.node) { if (ACPI_GET_DESCRIPTOR_TYPE (source_desc->reference.node) != ACPI_DESC_TYPE_NAMED) { ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, " %p - Not a valid namespace node\n", source_desc->reference. node)); } else { acpi_ex_do_debug_object((source_desc->reference. node)->object, level + 4, 0); } } break; default: ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%p %s\n", source_desc, acpi_ut_get_object_type_name (source_desc))); break; } ACPI_DEBUG_PRINT_RAW((ACPI_DB_EXEC, "\n")); return_VOID; } /******************************************************************************* * * FUNCTION: acpi_ex_store * * PARAMETERS: *source_desc - Value to be stored * *dest_desc - Where to store it. Must be an NS node * or an union acpi_operand_object of type * Reference; * walk_state - Current walk state * * RETURN: Status * * DESCRIPTION: Store the value described by source_desc into the location * described by dest_desc. Called by various interpreter * functions to store the result of an operation into * the destination operand -- not just simply the actual "Store" * ASL operator. * ******************************************************************************/ acpi_status acpi_ex_store(union acpi_operand_object *source_desc, union acpi_operand_object *dest_desc, struct acpi_walk_state *walk_state) { acpi_status status = AE_OK; union acpi_operand_object *ref_desc = dest_desc; ACPI_FUNCTION_TRACE_PTR(ex_store, dest_desc); /* Validate parameters */ if (!source_desc || !dest_desc) { ACPI_ERROR((AE_INFO, "Null parameter")); return_ACPI_STATUS(AE_AML_NO_OPERAND); } /* dest_desc can be either a namespace node or an ACPI object */ if (ACPI_GET_DESCRIPTOR_TYPE(dest_desc) == ACPI_DESC_TYPE_NAMED) { /* * Dest is a namespace node, * Storing an object into a Named node. */ status = acpi_ex_store_object_to_node(source_desc, (struct acpi_namespace_node *) dest_desc, walk_state, ACPI_IMPLICIT_CONVERSION); return_ACPI_STATUS(status); } /* Destination object must be a Reference or a Constant object */ switch (ACPI_GET_OBJECT_TYPE(dest_desc)) { case ACPI_TYPE_LOCAL_REFERENCE: break; case ACPI_TYPE_INTEGER: /* Allow stores to Constants -- a Noop as per ACPI spec */ if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) { return_ACPI_STATUS(AE_OK); } /*lint -fallthrough */ default: /* Destination is not a Reference object */ ACPI_ERROR((AE_INFO, "Target is not a Reference or Constant object - %s [%p]", acpi_ut_get_object_type_name(dest_desc), dest_desc)); ACPI_DUMP_STACK_ENTRY(source_desc); ACPI_DUMP_STACK_ENTRY(dest_desc); ACPI_DUMP_OPERANDS(&dest_desc, ACPI_IMODE_EXECUTE, "ExStore", 2, "Target is not a Reference or Constant object"); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* * Examine the Reference opcode. These cases are handled: * * 1) Store to Name (Change the object associated with a name) * 2) Store to an indexed area of a Buffer or Package * 3) Store to a Method Local or Arg * 4) Store to the debug object */ switch (ref_desc->reference.opcode) { case AML_REF_OF_OP: /* Storing an object into a Name "container" */ status = acpi_ex_store_object_to_node(source_desc, ref_desc->reference. object, walk_state, ACPI_IMPLICIT_CONVERSION); break; case AML_INDEX_OP: /* Storing to an Index (pointer into a packager or buffer) */ status = acpi_ex_store_object_to_index(source_desc, ref_desc, walk_state); break; case AML_LOCAL_OP: case AML_ARG_OP: /* Store to a method local/arg */ status = acpi_ds_store_object_to_local(ref_desc->reference.opcode, ref_desc->reference.offset, source_desc, walk_state); break; case AML_DEBUG_OP: /* * Storing to the Debug object causes the value stored to be * displayed and otherwise has no effect -- see ACPI Specification */ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "**** Write to Debug Object: Object %p %s ****:\n\n", source_desc, acpi_ut_get_object_type_name(source_desc))); acpi_ex_do_debug_object(source_desc, 0, 0); break; default: ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X", ref_desc->reference.opcode)); ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_ERROR); status = AE_AML_INTERNAL; break; } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ex_store_object_to_index * * PARAMETERS: *source_desc - Value to be stored * *dest_desc - Named object to receive the value * walk_state - Current walk state * * RETURN: Status * * DESCRIPTION: Store the object to indexed Buffer or Package element * ******************************************************************************/ static acpi_status acpi_ex_store_object_to_index(union acpi_operand_object *source_desc, union acpi_operand_object *index_desc, struct acpi_walk_state *walk_state) { acpi_status status = AE_OK; union acpi_operand_object *obj_desc; union acpi_operand_object *new_desc; u8 value = 0; u32 i; ACPI_FUNCTION_TRACE(ex_store_object_to_index); /* * Destination must be a reference pointer, and * must point to either a buffer or a package */ switch (index_desc->reference.target_type) { case ACPI_TYPE_PACKAGE: /* * Storing to a package element. Copy the object and replace * any existing object with the new object. No implicit * conversion is performed. * * The object at *(index_desc->Reference.Where) is the * element within the package that is to be modified. * The parent package object is at index_desc->Reference.Object */ obj_desc = *(index_desc->reference.where); if (ACPI_GET_OBJECT_TYPE(source_desc) == ACPI_TYPE_LOCAL_REFERENCE && source_desc->reference.opcode == AML_LOAD_OP) { /* This is a DDBHandle, just add a reference to it */ acpi_ut_add_reference(source_desc); new_desc = source_desc; } else { /* Normal object, copy it */ status = acpi_ut_copy_iobject_to_iobject(source_desc, &new_desc, walk_state); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } } if (obj_desc) { /* Decrement reference count by the ref count of the parent package */ for (i = 0; i < ((union acpi_operand_object *) index_desc->reference.object)->common. reference_count; i++) { acpi_ut_remove_reference(obj_desc); } } *(index_desc->reference.where) = new_desc; /* Increment ref count by the ref count of the parent package-1 */ for (i = 1; i < ((union acpi_operand_object *) index_desc->reference.object)->common. reference_count; i++) { acpi_ut_add_reference(new_desc); } break; case ACPI_TYPE_BUFFER_FIELD: /* * Store into a Buffer or String (not actually a real buffer_field) * at a location defined by an Index. * * The first 8-bit element of the source object is written to the * 8-bit Buffer location defined by the Index destination object, * according to the ACPI 2.0 specification. */ /* * Make sure the target is a Buffer or String. An error should * not happen here, since the reference_object was constructed * by the INDEX_OP code. */ obj_desc = index_desc->reference.object; if ((ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_BUFFER) && (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_STRING)) { return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* * The assignment of the individual elements will be slightly * different for each source type. */ switch (ACPI_GET_OBJECT_TYPE(source_desc)) { case ACPI_TYPE_INTEGER: /* Use the least-significant byte of the integer */ value = (u8) (source_desc->integer.value); break; case ACPI_TYPE_BUFFER: case ACPI_TYPE_STRING: /* Note: Takes advantage of common string/buffer fields */ value = source_desc->buffer.pointer[0]; break; default: /* All other types are invalid */ ACPI_ERROR((AE_INFO, "Source must be Integer/Buffer/String type, not %s", acpi_ut_get_object_type_name(source_desc))); return_ACPI_STATUS(AE_AML_OPERAND_TYPE); } /* Store the source value into the target buffer byte */ obj_desc->buffer.pointer[index_desc->reference.offset] = value; break; default: ACPI_ERROR((AE_INFO, "Target is not a Package or BufferField")); status = AE_AML_OPERAND_TYPE; break; } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ex_store_object_to_node * * PARAMETERS: source_desc - Value to be stored * Node - Named object to receive the value * walk_state - Current walk state * implicit_conversion - Perform implicit conversion (yes/no) * * RETURN: Status * * DESCRIPTION: Store the object to the named object. * * The Assignment of an object to a named object is handled here * The value passed in will replace the current value (if any) * with the input value. * * When storing into an object the data is converted to the * target object type then stored in the object. This means * that the target object type (for an initialized target) will * not be changed by a store operation. * * Assumes parameters are already validated. * ******************************************************************************/ acpi_status acpi_ex_store_object_to_node(union acpi_operand_object *source_desc, struct acpi_namespace_node *node, struct acpi_walk_state *walk_state, u8 implicit_conversion) { acpi_status status = AE_OK; union acpi_operand_object *target_desc; union acpi_operand_object *new_desc; acpi_object_type target_type; ACPI_FUNCTION_TRACE_PTR(ex_store_object_to_node, source_desc); /* Get current type of the node, and object attached to Node */ target_type = acpi_ns_get_type(node); target_desc = acpi_ns_get_attached_object(node); ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n", source_desc, acpi_ut_get_object_type_name(source_desc), node, acpi_ut_get_type_name(target_type))); /* * Resolve the source object to an actual value * (If it is a reference object) */ status = acpi_ex_resolve_object(&source_desc, target_type, walk_state); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* If no implicit conversion, drop into the default case below */ if ((!implicit_conversion) || ((walk_state->opcode == AML_COPY_OP) && (target_type != ACPI_TYPE_LOCAL_REGION_FIELD) && (target_type != ACPI_TYPE_LOCAL_BANK_FIELD) && (target_type != ACPI_TYPE_LOCAL_INDEX_FIELD))) { /* * Force execution of default (no implicit conversion). Note: * copy_object does not perform an implicit conversion, as per the ACPI * spec -- except in case of region/bank/index fields -- because these * objects must retain their original type permanently. */ target_type = ACPI_TYPE_ANY; } /* Do the actual store operation */ switch (target_type) { case ACPI_TYPE_BUFFER_FIELD: case ACPI_TYPE_LOCAL_REGION_FIELD: case ACPI_TYPE_LOCAL_BANK_FIELD: case ACPI_TYPE_LOCAL_INDEX_FIELD: /* For fields, copy the source data to the target field. */ status = acpi_ex_write_data_to_field(source_desc, target_desc, &walk_state->result_obj); break; case ACPI_TYPE_INTEGER: case ACPI_TYPE_STRING: case ACPI_TYPE_BUFFER: /* * These target types are all of type Integer/String/Buffer, and * therefore support implicit conversion before the store. * * Copy and/or convert the source object to a new target object */ status = acpi_ex_store_object_to_object(source_desc, target_desc, &new_desc, walk_state); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } if (new_desc != target_desc) { /* * Store the new new_desc as the new value of the Name, and set * the Name's type to that of the value being stored in it. * source_desc reference count is incremented by attach_object. * * Note: This may change the type of the node if an explicit store * has been performed such that the node/object type has been * changed. */ status = acpi_ns_attach_object(node, new_desc, new_desc->common.type); ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Store %s into %s via Convert/Attach\n", acpi_ut_get_object_type_name (source_desc), acpi_ut_get_object_type_name (new_desc))); } break; default: ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Storing %s (%p) directly into node (%p) with no implicit conversion\n", acpi_ut_get_object_type_name(source_desc), source_desc, node)); /* No conversions for all other types. Just attach the source object */ status = acpi_ns_attach_object(node, source_desc, ACPI_GET_OBJECT_TYPE (source_desc)); break; } return_ACPI_STATUS(status); }