/*
 * MPC8323E EMDS Device Tree Source
 *
 * Copyright 2006 Freescale Semiconductor Inc.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

/ {
	model = "MPC8323EMDS";
	compatible = "MPC83xx";
	#address-cells = <1>;
	#size-cells = <1>;
	linux,phandle = <100>;

	cpus {
		#cpus = <1>;
		#address-cells = <1>;
		#size-cells = <0>;
		linux,phandle = <200>;

		PowerPC,8323@0 {
			device_type = "cpu";
			reg = <0>;
			d-cache-line-size = <20>;	// 32 bytes
			i-cache-line-size = <20>;	// 32 bytes
			d-cache-size = <4000>;		// L1, 16K
			i-cache-size = <4000>;		// L1, 16K
			timebase-frequency = <0>;
			bus-frequency = <0>;
			clock-frequency = <0>;
			32-bit;
			linux,phandle = <201>;
			linux,boot-cpu;
		};
	};

	memory {
		device_type = "memory";
		linux,phandle = <300>;
		reg = <00000000 08000000>;
	};

	bcsr@f8000000 {
		device_type = "board-control";
		reg = <f8000000 8000>;
	};

	soc8323@e0000000 {
		#address-cells = <1>;
		#size-cells = <1>;
		#interrupt-cells = <2>;
		device_type = "soc";
		ranges = <0 e0000000 00100000>;
		reg = <e0000000 00000200>;
		bus-frequency = <7DE2900>;

		wdt@200 {
			device_type = "watchdog";
			compatible = "mpc83xx_wdt";
			reg = <200 100>;
		};

		i2c@3000 {
			device_type = "i2c";
			compatible = "fsl-i2c";
			reg = <3000 100>;
			interrupts = <e 8>;
			interrupt-parent = <700>;
			dfsrr;
		};

		serial@4500 {
			device_type = "serial";
			compatible = "ns16550";
			reg = <4500 100>;
			clock-frequency = <0>;
			interrupts = <9 8>;
			interrupt-parent = <700>;
		};

		serial@4600 {
			device_type = "serial";
			compatible = "ns16550";
			reg = <4600 100>;
			clock-frequency = <0>;
			interrupts = <a 8>;
			interrupt-parent = <700>;
		};

		crypto@30000 {
			device_type = "crypto";
			model = "SEC2";
			compatible = "talitos";
			reg = <30000 7000>;
			interrupts = <b 8>;
			interrupt-parent = <700>;
			/* Rev. 2.2 */
			num-channels = <1>;
			channel-fifo-len = <18>;
			exec-units-mask = <0000004c>;
			descriptor-types-mask = <0122003f>;
		};

		pci@8500 {
			linux,phandle = <8500>;
			interrupt-map-mask = <f800 0 0 7>;
			interrupt-map = <
					/* IDSEL 0x11 AD17 */
					 8800 0 0 1 700 14 8
					 8800 0 0 2 700 15 8
					 8800 0 0 3 700 16 8
					 8800 0 0 4 700 17 8

					/* IDSEL 0x12 AD18 */
					 9000 0 0 1 700 16 8
					 9000 0 0 2 700 17 8
					 9000 0 0 3 700 14 8
					 9000 0 0 4 700 15 8

					/* IDSEL 0x13 AD19 */
					 9800 0 0 1 700 17 8
					 9800 0 0 2 700 14 8
					 9800 0 0 3 700 15 8
					 9800 0 0 4 700 16 8

					/* IDSEL 0x15 AD21*/
					 a800 0 0 1 700 14 8
					 a800 0 0 2 700 15 8
					 a800 0 0 3 700 16 8
					 a800 0 0 4 700 17 8

					/* IDSEL 0x16 AD22*/
					 b000 0 0 1 700 17 8
					 b000 0 0 2 700 14 8
					 b000 0 0 3 700 15 8
					 b000 0 0 4 700 16 8

					/* IDSEL 0x17 AD23*/
					 b800 0 0 1 700 16 8
					 b800 0 0 2 700 17 8
					 b800 0 0 3 700 14 8
					 b800 0 0 4 700 15 8

					/* IDSEL 0x18 AD24*/
					 c000 0 0 1 700 15 8
					 c000 0 0 2 700 16 8
					 c000 0 0 3 700 17 8
					 c000 0 0 4 700 14 8>;
			interrupt-parent = <700>;
			interrupts = <42 8>;
			bus-range = <0 0>;
			ranges = <02000000 0 a0000000 90000000 0 10000000
			          42000000 0 80000000 80000000 0 10000000
			          01000000 0 00000000 d0000000 0 00100000>;
			clock-frequency = <0>;
			#interrupt-cells = <1>;
			#size-cells = <2>;
			#address-cells = <3>;
			reg = <8500 100>;
			compatible = "83xx";
			device_type = "pci";
		};

		pic@700 {
			linux,phandle = <700>;
			interrupt-controller;
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <700 100>;
			built-in;
			device_type = "ipic";
		};
		
		par_io@1400 {
			reg = <1400 100>;
			device_type = "par_io";
			num-ports = <7>;

			ucc_pin@03 {
				linux,phandle = <140003>;
				pio-map = <
			/* port  pin  dir  open_drain  assignment  has_irq */
					3  4  3  0  2  0  /* MDIO */
					3  5  1  0  2  0  /* MDC */
					0  d  2  0  1  0 	/* RX_CLK (CLK9) */
					3 18  2  0  1  0 	/* TX_CLK (CLK10) */
					1  1  1  0  1  0 	/* TxD1 */
					1  0  1  0  1  0 	/* TxD0 */
					1  1  1  0  1  0 	/* TxD1 */
					1  2  1  0  1  0 	/* TxD2 */
					1  3  1  0  1  0 	/* TxD3 */
					1  4  2  0  1  0 	/* RxD0 */
					1  5  2  0  1  0 	/* RxD1 */
					1  6  2  0  1  0 	/* RxD2 */
					1  7  2  0  1  0 	/* RxD3 */
					1  8  2  0  1  0 	/* RX_ER */
					1  9  1  0  1  0 	/* TX_ER */
					1  a  2  0  1  0 	/* RX_DV */
					1  b  2  0  1  0 	/* COL */
					1  c  1  0  1  0 	/* TX_EN */
					1  d  2  0  1  0>;/* CRS */
			};
			ucc_pin@04 {
				linux,phandle = <140004>;
				pio-map = <
			/* port  pin  dir  open_drain  assignment  has_irq */
					3 1f  2  0  1  0 	/* RX_CLK (CLK7) */
					3  6  2  0  1  0 	/* TX_CLK (CLK8) */
					1 12  1  0  1  0 	/* TxD0 */
					1 13  1  0  1  0 	/* TxD1 */
					1 14  1  0  1  0 	/* TxD2 */
					1 15  1  0  1  0 	/* TxD3 */
					1 16  2  0  1  0 	/* RxD0 */
					1 17  2  0  1  0 	/* RxD1 */
					1 18  2  0  1  0 	/* RxD2 */
					1 19  2  0  1  0 	/* RxD3 */
					1 1a  2  0  1  0 	/* RX_ER */
					1 1b  1  0  1  0 	/* TX_ER */
					1 1c  2  0  1  0 	/* RX_DV */
					1 1d  2  0  1  0 	/* COL */
					1 1e  1  0  1  0 	/* TX_EN */
					1 1f  2  0  1  0>;/* CRS */
			};
		};
	};

	qe@e0100000 {
		#address-cells = <1>;
		#size-cells = <1>;
		device_type = "qe";
		model = "QE";
		ranges = <0 e0100000 00100000>;
		reg = <e0100000 480>;
		brg-frequency = <0>;
		bus-frequency = <BCD3D80>;
		
		muram@10000 {
			device_type = "muram";
			ranges = <0 00010000 00004000>;
	
			data-only@0 {
				reg = <0 4000>;
			};
		};

		spi@4c0 {
			device_type = "spi";
			compatible = "fsl_spi";
			reg = <4c0 40>;
			interrupts = <2>;
			interrupt-parent = <80>;
			mode = "cpu";
		};

		spi@500 {
			device_type = "spi";
			compatible = "fsl_spi";
			reg = <500 40>;
			interrupts = <1>;
			interrupt-parent = <80>;
			mode = "cpu";
		};

		usb@6c0 {
			device_type = "usb";
			compatible = "qe_udc";
			reg = <6c0 40 8B00 100>;
			interrupts = <b>;
			interrupt-parent = <80>;
			mode = "slave";
		};

		ucc@2200 {
			device_type = "network";
			compatible = "ucc_geth";
			model = "UCC";
			device-id = <3>;
			reg = <2200 200>;
			interrupts = <22>;
			interrupt-parent = <80>;
			mac-address = [ 00 04 9f 00 23 23 ];
			rx-clock = <19>;
			tx-clock = <1a>;
			phy-handle = <212003>;
			pio-handle = <140003>;
		};

		ucc@3200 {
			device_type = "network";
			compatible = "ucc_geth";
			model = "UCC";
			device-id = <4>;
			reg = <3000 200>;
			interrupts = <23>;
			interrupt-parent = <80>;
			mac-address = [ 00 11 22 33 44 55 ];
			rx-clock = <17>;
			tx-clock = <18>;
			phy-handle = <212004>;
			pio-handle = <140004>;
		};

		mdio@2320 {
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <2320 18>;
			device_type = "mdio";
			compatible = "ucc_geth_phy";

			ethernet-phy@03 {
				linux,phandle = <212003>;
				interrupt-parent = <700>;
				interrupts = <11 2>;
				reg = <3>;
				device_type = "ethernet-phy";
				interface = <3>; //ENET_100_MII
			};
			ethernet-phy@04 {
				linux,phandle = <212004>;
				interrupt-parent = <700>;
				interrupts = <12 2>;
				reg = <4>;
				device_type = "ethernet-phy";
				interface = <3>;
			};
		};

		qeic@80 {
			linux,phandle = <80>;
			interrupt-controller;
			device_type = "qeic";
			#address-cells = <0>;
			#interrupt-cells = <1>;
			reg = <80 80>;
			built-in;
			big-endian;
			interrupts = <20 8 21 8>; //high:32 low:33
			interrupt-parent = <700>;
		};
	};
};