34a956db37
Intel Rapid Start Technology is a firmware-based suspend-to-disk implementation. Once placed in S3, the device will wake once either a timeout elapses or the battery reaches a critical level. It will then resume to the firmware and copy the contents of RAM to a specialised partition, and then power off the machine. If the user turns the machine back on the firmware will copy the contents of the partition back to RAM and then resume from S3 as normal. This driver provides an interface for configuring the wakeup events and timeout. It still requires firmware support and an appropriate suspend partition. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
22 lines
844 B
Plaintext
22 lines
844 B
Plaintext
What: /sys/bus/acpi/intel-rapid-start/wakeup_events
|
|
Date: July 2, 2013
|
|
KernelVersion: 3.11
|
|
Contact: Matthew Garrett <mjg59@srcf.ucam.org>
|
|
Description: An integer representing a set of wakeup events as follows:
|
|
1: Wake to enter hibernation when the wakeup timer expires
|
|
2: Wake to enter hibernation when the battery reaches a
|
|
critical level
|
|
|
|
These values are ORed together. For example, a value of 3
|
|
indicates that the system will wake to enter hibernation when
|
|
either the wakeup timer expires or the battery reaches a
|
|
critical level.
|
|
|
|
What: /sys/bus/acpi/intel-rapid-start/wakeup_time
|
|
Date: July 2, 2013
|
|
KernelVersion: 3.11
|
|
Contact: Matthew Garrett <mjg59@srcf.ucam.org>
|
|
Description: An integer representing the length of time the system will
|
|
remain asleep before waking up to enter hibernation.
|
|
This value is in minutes.
|