42dac16dc4
[ Upstream commit 23eb7f560a2a6a1b0dbaaaae8685da75314347e4 ]
Similar to commit 22e9c88d48
("powerpc/64: reuse PPC32 static inline flush_dcache_range()")
this patch converts the following ASM symbols to C:
flush_icache_range()
__flush_dcache_icache()
__flush_dcache_icache_phys()
This was done as we discovered a long-standing bug where the length of the
range was truncated due to using a 32 bit shift instead of a 64 bit one.
By converting these functions to C, it becomes easier to maintain.
flush_dcache_icache_phys() retains a critical assembler section as we must
ensure there are no memory accesses while the data MMU is disabled
(authored by Christophe Leroy). Since this has no external callers, it has
also been made static, allowing the compiler to inline it within
flush_dcache_icache_page().
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[mpe: Minor fixups, don't export __flush_dcache_icache()]
Link: https://lore.kernel.org/r/20191104023305.9581-5-alastair@au1.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
538 lines
11 KiB
ArmAsm
538 lines
11 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* This file contains miscellaneous low-level functions.
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
|
|
* and Paul Mackerras.
|
|
* Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
|
|
* PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
|
|
*/
|
|
|
|
#include <linux/sys.h>
|
|
#include <asm/unistd.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/kexec.h>
|
|
#include <asm/ptrace.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/export.h>
|
|
#include <asm/feature-fixups.h>
|
|
|
|
.text
|
|
|
|
_GLOBAL(call_do_softirq)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
|
|
mr r1,r3
|
|
bl __do_softirq
|
|
ld r1,0(r1)
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
_GLOBAL(call_do_irq)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
|
|
mr r1,r4
|
|
bl __do_irq
|
|
ld r1,0(r1)
|
|
ld r0,16(r1)
|
|
mtlr r0
|
|
blr
|
|
|
|
_GLOBAL(__bswapdi2)
|
|
EXPORT_SYMBOL(__bswapdi2)
|
|
srdi r8,r3,32
|
|
rlwinm r7,r3,8,0xffffffff
|
|
rlwimi r7,r3,24,0,7
|
|
rlwinm r9,r8,8,0xffffffff
|
|
rlwimi r7,r3,24,16,23
|
|
rlwimi r9,r8,24,0,7
|
|
rlwimi r9,r8,24,16,23
|
|
sldi r7,r7,32
|
|
or r3,r7,r9
|
|
blr
|
|
|
|
|
|
#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
|
|
_GLOBAL(rmci_on)
|
|
sync
|
|
isync
|
|
li r3,0x100
|
|
rldicl r3,r3,32,0
|
|
mfspr r5,SPRN_HID4
|
|
or r5,r5,r3
|
|
sync
|
|
mtspr SPRN_HID4,r5
|
|
isync
|
|
slbia
|
|
isync
|
|
sync
|
|
blr
|
|
|
|
_GLOBAL(rmci_off)
|
|
sync
|
|
isync
|
|
li r3,0x100
|
|
rldicl r3,r3,32,0
|
|
mfspr r5,SPRN_HID4
|
|
andc r5,r5,r3
|
|
sync
|
|
mtspr SPRN_HID4,r5
|
|
isync
|
|
slbia
|
|
isync
|
|
sync
|
|
blr
|
|
#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
|
|
|
|
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
|
|
|
|
/*
|
|
* Do an IO access in real mode
|
|
*/
|
|
_GLOBAL(real_readb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
mfspr r6,SPRN_HID4
|
|
rldicl r5,r6,32,0
|
|
ori r5,r5,0x100
|
|
rldicl r5,r5,32,0
|
|
sync
|
|
mtspr SPRN_HID4,r5
|
|
isync
|
|
slbia
|
|
isync
|
|
lbz r3,0(r3)
|
|
sync
|
|
mtspr SPRN_HID4,r6
|
|
isync
|
|
slbia
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
/*
|
|
* Do an IO access in real mode
|
|
*/
|
|
_GLOBAL(real_writeb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
mfspr r6,SPRN_HID4
|
|
rldicl r5,r6,32,0
|
|
ori r5,r5,0x100
|
|
rldicl r5,r5,32,0
|
|
sync
|
|
mtspr SPRN_HID4,r5
|
|
isync
|
|
slbia
|
|
isync
|
|
stb r3,0(r4)
|
|
sync
|
|
mtspr SPRN_HID4,r6
|
|
isync
|
|
slbia
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
|
|
|
|
#ifdef CONFIG_PPC_PASEMI
|
|
|
|
_GLOBAL(real_205_readb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
LBZCIX(R3,R0,R3)
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
_GLOBAL(real_205_writeb)
|
|
mfmsr r7
|
|
ori r0,r7,MSR_DR
|
|
xori r0,r0,MSR_DR
|
|
sync
|
|
mtmsrd r0
|
|
sync
|
|
isync
|
|
STBCIX(R3,R0,R4)
|
|
isync
|
|
mtmsrd r7
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
#endif /* CONFIG_PPC_PASEMI */
|
|
|
|
|
|
#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE)
|
|
/*
|
|
* SCOM access functions for 970 (FX only for now)
|
|
*
|
|
* unsigned long scom970_read(unsigned int address);
|
|
* void scom970_write(unsigned int address, unsigned long value);
|
|
*
|
|
* The address passed in is the 24 bits register address. This code
|
|
* is 970 specific and will not check the status bits, so you should
|
|
* know what you are doing.
|
|
*/
|
|
_GLOBAL(scom970_read)
|
|
/* interrupts off */
|
|
mfmsr r4
|
|
ori r0,r4,MSR_EE
|
|
xori r0,r0,MSR_EE
|
|
mtmsrd r0,1
|
|
|
|
/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
|
|
* (including parity). On current CPUs they must be 0'd,
|
|
* and finally or in RW bit
|
|
*/
|
|
rlwinm r3,r3,8,0,15
|
|
ori r3,r3,0x8000
|
|
|
|
/* do the actual scom read */
|
|
sync
|
|
mtspr SPRN_SCOMC,r3
|
|
isync
|
|
mfspr r3,SPRN_SCOMD
|
|
isync
|
|
mfspr r0,SPRN_SCOMC
|
|
isync
|
|
|
|
/* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
|
|
* that's the best we can do). Not implemented yet as we don't use
|
|
* the scom on any of the bogus CPUs yet, but may have to be done
|
|
* ultimately
|
|
*/
|
|
|
|
/* restore interrupts */
|
|
mtmsrd r4,1
|
|
blr
|
|
|
|
|
|
_GLOBAL(scom970_write)
|
|
/* interrupts off */
|
|
mfmsr r5
|
|
ori r0,r5,MSR_EE
|
|
xori r0,r0,MSR_EE
|
|
mtmsrd r0,1
|
|
|
|
/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
|
|
* (including parity). On current CPUs they must be 0'd.
|
|
*/
|
|
|
|
rlwinm r3,r3,8,0,15
|
|
|
|
sync
|
|
mtspr SPRN_SCOMD,r4 /* write data */
|
|
isync
|
|
mtspr SPRN_SCOMC,r3 /* write command */
|
|
isync
|
|
mfspr 3,SPRN_SCOMC
|
|
isync
|
|
|
|
/* restore interrupts */
|
|
mtmsrd r5,1
|
|
blr
|
|
#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
|
|
|
|
/* kexec_wait(phys_cpu)
|
|
*
|
|
* wait for the flag to change, indicating this kernel is going away but
|
|
* the slave code for the next one is at addresses 0 to 100.
|
|
*
|
|
* This is used by all slaves, even those that did not find a matching
|
|
* paca in the secondary startup code.
|
|
*
|
|
* Physical (hardware) cpu id should be in r3.
|
|
*/
|
|
_GLOBAL(kexec_wait)
|
|
bl 1f
|
|
1: mflr r5
|
|
addi r5,r5,kexec_flag-1b
|
|
|
|
99: HMT_LOW
|
|
#ifdef CONFIG_KEXEC_CORE /* use no memory without kexec */
|
|
lwz r4,0(r5)
|
|
cmpwi 0,r4,0
|
|
beq 99b
|
|
#ifdef CONFIG_PPC_BOOK3S_64
|
|
li r10,0x60
|
|
mfmsr r11
|
|
clrrdi r11,r11,1 /* Clear MSR_LE */
|
|
mtsrr0 r10
|
|
mtsrr1 r11
|
|
rfid
|
|
#else
|
|
/* Create TLB entry in book3e_secondary_core_init */
|
|
li r4,0
|
|
ba 0x60
|
|
#endif
|
|
#endif
|
|
|
|
/* this can be in text because we won't change it until we are
|
|
* running in real anyways
|
|
*/
|
|
kexec_flag:
|
|
.long 0
|
|
|
|
|
|
#ifdef CONFIG_KEXEC_CORE
|
|
#ifdef CONFIG_PPC_BOOK3E
|
|
/*
|
|
* BOOK3E has no real MMU mode, so we have to setup the initial TLB
|
|
* for a core to identity map v:0 to p:0. This current implementation
|
|
* assumes that 1G is enough for kexec.
|
|
*/
|
|
kexec_create_tlb:
|
|
/*
|
|
* Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
|
|
* IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
|
|
*/
|
|
PPC_TLBILX_ALL(0,R0)
|
|
sync
|
|
isync
|
|
|
|
mfspr r10,SPRN_TLB1CFG
|
|
andi. r10,r10,TLBnCFG_N_ENTRY /* Extract # entries */
|
|
subi r10,r10,1 /* Last entry: no conflict with kernel text */
|
|
lis r9,MAS0_TLBSEL(1)@h
|
|
rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */
|
|
|
|
/* Set up a temp identity mapping v:0 to p:0 and return to it. */
|
|
#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
|
|
#define M_IF_NEEDED MAS2_M
|
|
#else
|
|
#define M_IF_NEEDED 0
|
|
#endif
|
|
mtspr SPRN_MAS0,r9
|
|
|
|
lis r9,(MAS1_VALID|MAS1_IPROT)@h
|
|
ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
|
|
mtspr SPRN_MAS1,r9
|
|
|
|
LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED)
|
|
mtspr SPRN_MAS2,r9
|
|
|
|
LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
|
|
mtspr SPRN_MAS3,r9
|
|
li r9,0
|
|
mtspr SPRN_MAS7,r9
|
|
|
|
tlbwe
|
|
isync
|
|
blr
|
|
#endif
|
|
|
|
/* kexec_smp_wait(void)
|
|
*
|
|
* call with interrupts off
|
|
* note: this is a terminal routine, it does not save lr
|
|
*
|
|
* get phys id from paca
|
|
* switch to real mode
|
|
* mark the paca as no longer used
|
|
* join other cpus in kexec_wait(phys_id)
|
|
*/
|
|
_GLOBAL(kexec_smp_wait)
|
|
lhz r3,PACAHWCPUID(r13)
|
|
bl real_mode
|
|
|
|
li r4,KEXEC_STATE_REAL_MODE
|
|
stb r4,PACAKEXECSTATE(r13)
|
|
SYNC
|
|
|
|
b kexec_wait
|
|
|
|
/*
|
|
* switch to real mode (turn mmu off)
|
|
* we use the early kernel trick that the hardware ignores bits
|
|
* 0 and 1 (big endian) of the effective address in real mode
|
|
*
|
|
* don't overwrite r3 here, it is live for kexec_wait above.
|
|
*/
|
|
real_mode: /* assume normal blr return */
|
|
#ifdef CONFIG_PPC_BOOK3E
|
|
/* Create an identity mapping. */
|
|
b kexec_create_tlb
|
|
#else
|
|
1: li r9,MSR_RI
|
|
li r10,MSR_DR|MSR_IR
|
|
mflr r11 /* return address to SRR0 */
|
|
mfmsr r12
|
|
andc r9,r12,r9
|
|
andc r10,r12,r10
|
|
|
|
mtmsrd r9,1
|
|
mtspr SPRN_SRR1,r10
|
|
mtspr SPRN_SRR0,r11
|
|
rfid
|
|
#endif
|
|
|
|
/*
|
|
* kexec_sequence(newstack, start, image, control, clear_all(),
|
|
copy_with_mmu_off)
|
|
*
|
|
* does the grungy work with stack switching and real mode switches
|
|
* also does simple calls to other code
|
|
*/
|
|
|
|
_GLOBAL(kexec_sequence)
|
|
mflr r0
|
|
std r0,16(r1)
|
|
|
|
/* switch stacks to newstack -- &kexec_stack.stack */
|
|
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
|
|
mr r1,r3
|
|
|
|
li r0,0
|
|
std r0,16(r1)
|
|
|
|
BEGIN_FTR_SECTION
|
|
/*
|
|
* This is the best time to turn AMR/IAMR off.
|
|
* key 0 is used in radix for supervisor<->user
|
|
* protection, but on hash key 0 is reserved
|
|
* ideally we want to enter with a clean state.
|
|
* NOTE, we rely on r0 being 0 from above.
|
|
*/
|
|
mtspr SPRN_IAMR,r0
|
|
BEGIN_FTR_SECTION_NESTED(42)
|
|
mtspr SPRN_AMOR,r0
|
|
END_FTR_SECTION_NESTED_IFSET(CPU_FTR_HVMODE, 42)
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
|
|
|
|
/* save regs for local vars on new stack.
|
|
* yes, we won't go back, but ...
|
|
*/
|
|
std r31,-8(r1)
|
|
std r30,-16(r1)
|
|
std r29,-24(r1)
|
|
std r28,-32(r1)
|
|
std r27,-40(r1)
|
|
std r26,-48(r1)
|
|
std r25,-56(r1)
|
|
|
|
stdu r1,-STACK_FRAME_OVERHEAD-64(r1)
|
|
|
|
/* save args into preserved regs */
|
|
mr r31,r3 /* newstack (both) */
|
|
mr r30,r4 /* start (real) */
|
|
mr r29,r5 /* image (virt) */
|
|
mr r28,r6 /* control, unused */
|
|
mr r27,r7 /* clear_all() fn desc */
|
|
mr r26,r8 /* copy_with_mmu_off */
|
|
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
|
|
|
|
/* disable interrupts, we are overwriting kernel data next */
|
|
#ifdef CONFIG_PPC_BOOK3E
|
|
wrteei 0
|
|
#else
|
|
mfmsr r3
|
|
rlwinm r3,r3,0,17,15
|
|
mtmsrd r3,1
|
|
#endif
|
|
|
|
/* We need to turn the MMU off unless we are in hash mode
|
|
* under a hypervisor
|
|
*/
|
|
cmpdi r26,0
|
|
beq 1f
|
|
bl real_mode
|
|
1:
|
|
/* copy dest pages, flush whole dest image */
|
|
mr r3,r29
|
|
bl kexec_copy_flush /* (image) */
|
|
|
|
/* turn off mmu now if not done earlier */
|
|
cmpdi r26,0
|
|
bne 1f
|
|
bl real_mode
|
|
|
|
/* copy 0x100 bytes starting at start to 0 */
|
|
1: li r3,0
|
|
mr r4,r30 /* start, aka phys mem offset */
|
|
li r5,0x100
|
|
li r6,0
|
|
bl copy_and_flush /* (dest, src, copy limit, start offset) */
|
|
1: /* assume normal blr return */
|
|
|
|
/* release other cpus to the new kernel secondary start at 0x60 */
|
|
mflr r5
|
|
li r6,1
|
|
stw r6,kexec_flag-1b(5)
|
|
|
|
cmpdi r27,0
|
|
beq 1f
|
|
|
|
/* clear out hardware hash page table and tlb */
|
|
#ifdef PPC64_ELF_ABI_v1
|
|
ld r12,0(r27) /* deref function descriptor */
|
|
#else
|
|
mr r12,r27
|
|
#endif
|
|
mtctr r12
|
|
bctrl /* mmu_hash_ops.hpte_clear_all(void); */
|
|
|
|
/*
|
|
* kexec image calling is:
|
|
* the first 0x100 bytes of the entry point are copied to 0
|
|
*
|
|
* all slaves branch to slave = 0x60 (absolute)
|
|
* slave(phys_cpu_id);
|
|
*
|
|
* master goes to start = entry point
|
|
* start(phys_cpu_id, start, 0);
|
|
*
|
|
*
|
|
* a wrapper is needed to call existing kernels, here is an approximate
|
|
* description of one method:
|
|
*
|
|
* v2: (2.6.10)
|
|
* start will be near the boot_block (maybe 0x100 bytes before it?)
|
|
* it will have a 0x60, which will b to boot_block, where it will wait
|
|
* and 0 will store phys into struct boot-block and load r3 from there,
|
|
* copy kernel 0-0x100 and tell slaves to back down to 0x60 again
|
|
*
|
|
* v1: (2.6.9)
|
|
* boot block will have all cpus scanning device tree to see if they
|
|
* are the boot cpu ?????
|
|
* other device tree differences (prop sizes, va vs pa, etc)...
|
|
*/
|
|
1: mr r3,r25 # my phys cpu
|
|
mr r4,r30 # start, aka phys mem offset
|
|
mtlr 4
|
|
li r5,0
|
|
blr /* image->start(physid, image->start, 0); */
|
|
#endif /* CONFIG_KEXEC_CORE */
|