b90ec1e344
This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (when parent clocks are localy declared in the controller) and use .parent_data otherwise. Remove clk input helper and all bypass clocks (declared in probe function) which are no longer used since we are able to use device-tree clock name directly. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
339 lines
8.1 KiB
C
339 lines
8.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Amlogic Meson-AXG Clock Controller Driver
|
|
*
|
|
* Copyright (c) 2016 Baylibre SAS.
|
|
* Author: Michael Turquette <mturquette@baylibre.com>
|
|
*
|
|
* Copyright (c) 2018 Amlogic, inc.
|
|
* Author: Qiufang Dai <qiufang.dai@amlogic.com>
|
|
*/
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset-controller.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include "meson-aoclk.h"
|
|
#include "axg-aoclk.h"
|
|
|
|
#include "clk-regmap.h"
|
|
#include "clk-dualdiv.h"
|
|
|
|
/*
|
|
* AO Configuration Clock registers offsets
|
|
* Register offsets from the data sheet must be multiplied by 4.
|
|
*/
|
|
#define AO_RTI_PWR_CNTL_REG1 0x0C
|
|
#define AO_RTI_PWR_CNTL_REG0 0x10
|
|
#define AO_RTI_GEN_CNTL_REG0 0x40
|
|
#define AO_OSCIN_CNTL 0x58
|
|
#define AO_CRT_CLK_CNTL1 0x68
|
|
#define AO_SAR_CLK 0x90
|
|
#define AO_RTC_ALT_CLK_CNTL0 0x94
|
|
#define AO_RTC_ALT_CLK_CNTL1 0x98
|
|
|
|
#define AXG_AO_GATE(_name, _bit) \
|
|
static struct clk_regmap axg_aoclk_##_name = { \
|
|
.data = &(struct clk_regmap_gate_data) { \
|
|
.offset = (AO_RTI_GEN_CNTL_REG0), \
|
|
.bit_idx = (_bit), \
|
|
}, \
|
|
.hw.init = &(struct clk_init_data) { \
|
|
.name = "axg_ao_" #_name, \
|
|
.ops = &clk_regmap_gate_ops, \
|
|
.parent_data = &(const struct clk_parent_data) { \
|
|
.fw_name = "mpeg-clk", \
|
|
}, \
|
|
.num_parents = 1, \
|
|
.flags = CLK_IGNORE_UNUSED, \
|
|
}, \
|
|
}
|
|
|
|
AXG_AO_GATE(remote, 0);
|
|
AXG_AO_GATE(i2c_master, 1);
|
|
AXG_AO_GATE(i2c_slave, 2);
|
|
AXG_AO_GATE(uart1, 3);
|
|
AXG_AO_GATE(uart2, 5);
|
|
AXG_AO_GATE(ir_blaster, 6);
|
|
AXG_AO_GATE(saradc, 7);
|
|
|
|
static struct clk_regmap axg_aoclk_cts_oscin = {
|
|
.data = &(struct clk_regmap_gate_data){
|
|
.offset = AO_RTI_PWR_CNTL_REG0,
|
|
.bit_idx = 14,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "cts_oscin",
|
|
.ops = &clk_regmap_gate_ro_ops,
|
|
.parent_data = &(const struct clk_parent_data) {
|
|
.fw_name = "xtal",
|
|
},
|
|
.num_parents = 1,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_32k_pre = {
|
|
.data = &(struct clk_regmap_gate_data){
|
|
.offset = AO_RTC_ALT_CLK_CNTL0,
|
|
.bit_idx = 31,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_32k_pre",
|
|
.ops = &clk_regmap_gate_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&axg_aoclk_cts_oscin.hw
|
|
},
|
|
.num_parents = 1,
|
|
},
|
|
};
|
|
|
|
static const struct meson_clk_dualdiv_param axg_32k_div_table[] = {
|
|
{
|
|
.dual = 1,
|
|
.n1 = 733,
|
|
.m1 = 8,
|
|
.n2 = 732,
|
|
.m2 = 11,
|
|
}, {}
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_32k_div = {
|
|
.data = &(struct meson_clk_dualdiv_data){
|
|
.n1 = {
|
|
.reg_off = AO_RTC_ALT_CLK_CNTL0,
|
|
.shift = 0,
|
|
.width = 12,
|
|
},
|
|
.n2 = {
|
|
.reg_off = AO_RTC_ALT_CLK_CNTL0,
|
|
.shift = 12,
|
|
.width = 12,
|
|
},
|
|
.m1 = {
|
|
.reg_off = AO_RTC_ALT_CLK_CNTL1,
|
|
.shift = 0,
|
|
.width = 12,
|
|
},
|
|
.m2 = {
|
|
.reg_off = AO_RTC_ALT_CLK_CNTL1,
|
|
.shift = 12,
|
|
.width = 12,
|
|
},
|
|
.dual = {
|
|
.reg_off = AO_RTC_ALT_CLK_CNTL0,
|
|
.shift = 28,
|
|
.width = 1,
|
|
},
|
|
.table = axg_32k_div_table,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_32k_div",
|
|
.ops = &meson_clk_dualdiv_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&axg_aoclk_32k_pre.hw
|
|
},
|
|
.num_parents = 1,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_32k_sel = {
|
|
.data = &(struct clk_regmap_mux_data) {
|
|
.offset = AO_RTC_ALT_CLK_CNTL1,
|
|
.mask = 0x1,
|
|
.shift = 24,
|
|
.flags = CLK_MUX_ROUND_CLOSEST,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_32k_sel",
|
|
.ops = &clk_regmap_mux_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&axg_aoclk_32k_div.hw,
|
|
&axg_aoclk_32k_pre.hw,
|
|
},
|
|
.num_parents = 2,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_32k = {
|
|
.data = &(struct clk_regmap_gate_data){
|
|
.offset = AO_RTC_ALT_CLK_CNTL0,
|
|
.bit_idx = 30,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_32k",
|
|
.ops = &clk_regmap_gate_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&axg_aoclk_32k_sel.hw
|
|
},
|
|
.num_parents = 1,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_cts_rtc_oscin = {
|
|
.data = &(struct clk_regmap_mux_data) {
|
|
.offset = AO_RTI_PWR_CNTL_REG0,
|
|
.mask = 0x1,
|
|
.shift = 10,
|
|
.flags = CLK_MUX_ROUND_CLOSEST,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_cts_rtc_oscin",
|
|
.ops = &clk_regmap_mux_ops,
|
|
.parent_data = (const struct clk_parent_data []) {
|
|
{ .hw = &axg_aoclk_32k.hw },
|
|
{ .fw_name = "ext_32k-0", },
|
|
},
|
|
.num_parents = 2,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_clk81 = {
|
|
.data = &(struct clk_regmap_mux_data) {
|
|
.offset = AO_RTI_PWR_CNTL_REG0,
|
|
.mask = 0x1,
|
|
.shift = 8,
|
|
.flags = CLK_MUX_ROUND_CLOSEST,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_clk81",
|
|
.ops = &clk_regmap_mux_ro_ops,
|
|
.parent_data = (const struct clk_parent_data []) {
|
|
{ .fw_name = "mpeg-clk", },
|
|
{ .hw = &axg_aoclk_cts_rtc_oscin.hw },
|
|
},
|
|
.num_parents = 2,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_saradc_mux = {
|
|
.data = &(struct clk_regmap_mux_data) {
|
|
.offset = AO_SAR_CLK,
|
|
.mask = 0x3,
|
|
.shift = 9,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_saradc_mux",
|
|
.ops = &clk_regmap_mux_ops,
|
|
.parent_data = (const struct clk_parent_data []) {
|
|
{ .fw_name = "xtal", },
|
|
{ .hw = &axg_aoclk_clk81.hw },
|
|
},
|
|
.num_parents = 2,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_saradc_div = {
|
|
.data = &(struct clk_regmap_div_data) {
|
|
.offset = AO_SAR_CLK,
|
|
.shift = 0,
|
|
.width = 8,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_saradc_div",
|
|
.ops = &clk_regmap_divider_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&axg_aoclk_saradc_mux.hw
|
|
},
|
|
.num_parents = 1,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
},
|
|
};
|
|
|
|
static struct clk_regmap axg_aoclk_saradc_gate = {
|
|
.data = &(struct clk_regmap_gate_data) {
|
|
.offset = AO_SAR_CLK,
|
|
.bit_idx = 8,
|
|
},
|
|
.hw.init = &(struct clk_init_data){
|
|
.name = "axg_ao_saradc_gate",
|
|
.ops = &clk_regmap_gate_ops,
|
|
.parent_hws = (const struct clk_hw *[]) {
|
|
&axg_aoclk_saradc_div.hw
|
|
},
|
|
.num_parents = 1,
|
|
.flags = CLK_SET_RATE_PARENT,
|
|
},
|
|
};
|
|
|
|
static const unsigned int axg_aoclk_reset[] = {
|
|
[RESET_AO_REMOTE] = 16,
|
|
[RESET_AO_I2C_MASTER] = 18,
|
|
[RESET_AO_I2C_SLAVE] = 19,
|
|
[RESET_AO_UART1] = 17,
|
|
[RESET_AO_UART2] = 22,
|
|
[RESET_AO_IR_BLASTER] = 23,
|
|
};
|
|
|
|
static struct clk_regmap *axg_aoclk_regmap[] = {
|
|
&axg_aoclk_remote,
|
|
&axg_aoclk_i2c_master,
|
|
&axg_aoclk_i2c_slave,
|
|
&axg_aoclk_uart1,
|
|
&axg_aoclk_uart2,
|
|
&axg_aoclk_ir_blaster,
|
|
&axg_aoclk_saradc,
|
|
&axg_aoclk_cts_oscin,
|
|
&axg_aoclk_32k_pre,
|
|
&axg_aoclk_32k_div,
|
|
&axg_aoclk_32k_sel,
|
|
&axg_aoclk_32k,
|
|
&axg_aoclk_cts_rtc_oscin,
|
|
&axg_aoclk_clk81,
|
|
&axg_aoclk_saradc_mux,
|
|
&axg_aoclk_saradc_div,
|
|
&axg_aoclk_saradc_gate,
|
|
};
|
|
|
|
static const struct clk_hw_onecell_data axg_aoclk_onecell_data = {
|
|
.hws = {
|
|
[CLKID_AO_REMOTE] = &axg_aoclk_remote.hw,
|
|
[CLKID_AO_I2C_MASTER] = &axg_aoclk_i2c_master.hw,
|
|
[CLKID_AO_I2C_SLAVE] = &axg_aoclk_i2c_slave.hw,
|
|
[CLKID_AO_UART1] = &axg_aoclk_uart1.hw,
|
|
[CLKID_AO_UART2] = &axg_aoclk_uart2.hw,
|
|
[CLKID_AO_IR_BLASTER] = &axg_aoclk_ir_blaster.hw,
|
|
[CLKID_AO_SAR_ADC] = &axg_aoclk_saradc.hw,
|
|
[CLKID_AO_CLK81] = &axg_aoclk_clk81.hw,
|
|
[CLKID_AO_SAR_ADC_SEL] = &axg_aoclk_saradc_mux.hw,
|
|
[CLKID_AO_SAR_ADC_DIV] = &axg_aoclk_saradc_div.hw,
|
|
[CLKID_AO_SAR_ADC_CLK] = &axg_aoclk_saradc_gate.hw,
|
|
[CLKID_AO_CTS_OSCIN] = &axg_aoclk_cts_oscin.hw,
|
|
[CLKID_AO_32K_PRE] = &axg_aoclk_32k_pre.hw,
|
|
[CLKID_AO_32K_DIV] = &axg_aoclk_32k_div.hw,
|
|
[CLKID_AO_32K_SEL] = &axg_aoclk_32k_sel.hw,
|
|
[CLKID_AO_32K] = &axg_aoclk_32k.hw,
|
|
[CLKID_AO_CTS_RTC_OSCIN] = &axg_aoclk_cts_rtc_oscin.hw,
|
|
},
|
|
.num = NR_CLKS,
|
|
};
|
|
|
|
static const struct meson_aoclk_data axg_aoclkc_data = {
|
|
.reset_reg = AO_RTI_GEN_CNTL_REG0,
|
|
.num_reset = ARRAY_SIZE(axg_aoclk_reset),
|
|
.reset = axg_aoclk_reset,
|
|
.num_clks = ARRAY_SIZE(axg_aoclk_regmap),
|
|
.clks = axg_aoclk_regmap,
|
|
.hw_data = &axg_aoclk_onecell_data,
|
|
};
|
|
|
|
static const struct of_device_id axg_aoclkc_match_table[] = {
|
|
{
|
|
.compatible = "amlogic,meson-axg-aoclkc",
|
|
.data = &axg_aoclkc_data,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver axg_aoclkc_driver = {
|
|
.probe = meson_aoclkc_probe,
|
|
.driver = {
|
|
.name = "axg-aoclkc",
|
|
.of_match_table = axg_aoclkc_match_table,
|
|
},
|
|
};
|
|
|
|
builtin_platform_driver(axg_aoclkc_driver);
|