889c2b7ec4
Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
188 lines
5.0 KiB
C
188 lines
5.0 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2018 BayLibre, SAS.
|
|
* Author: Jerome Brunet <jbrunet@baylibre.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include "clk-regmap.h"
|
|
|
|
static int clk_regmap_gate_endisable(struct clk_hw *hw, int enable)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_gate_data *gate = clk_get_regmap_gate_data(clk);
|
|
int set = gate->flags & CLK_GATE_SET_TO_DISABLE ? 1 : 0;
|
|
|
|
set ^= enable;
|
|
|
|
return regmap_update_bits(clk->map, gate->offset, BIT(gate->bit_idx),
|
|
set ? BIT(gate->bit_idx) : 0);
|
|
}
|
|
|
|
static int clk_regmap_gate_enable(struct clk_hw *hw)
|
|
{
|
|
return clk_regmap_gate_endisable(hw, 1);
|
|
}
|
|
|
|
static void clk_regmap_gate_disable(struct clk_hw *hw)
|
|
{
|
|
clk_regmap_gate_endisable(hw, 0);
|
|
}
|
|
|
|
static int clk_regmap_gate_is_enabled(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_gate_data *gate = clk_get_regmap_gate_data(clk);
|
|
unsigned int val;
|
|
|
|
regmap_read(clk->map, gate->offset, &val);
|
|
if (gate->flags & CLK_GATE_SET_TO_DISABLE)
|
|
val ^= BIT(gate->bit_idx);
|
|
|
|
val &= BIT(gate->bit_idx);
|
|
|
|
return val ? 1 : 0;
|
|
}
|
|
|
|
const struct clk_ops clk_regmap_gate_ops = {
|
|
.enable = clk_regmap_gate_enable,
|
|
.disable = clk_regmap_gate_disable,
|
|
.is_enabled = clk_regmap_gate_is_enabled,
|
|
};
|
|
EXPORT_SYMBOL_GPL(clk_regmap_gate_ops);
|
|
|
|
const struct clk_ops clk_regmap_gate_ro_ops = {
|
|
.is_enabled = clk_regmap_gate_is_enabled,
|
|
};
|
|
EXPORT_SYMBOL_GPL(clk_regmap_gate_ro_ops);
|
|
|
|
static unsigned long clk_regmap_div_recalc_rate(struct clk_hw *hw,
|
|
unsigned long prate)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(clk->map, div->offset, &val);
|
|
if (ret)
|
|
/* Gives a hint that something is wrong */
|
|
return 0;
|
|
|
|
val >>= div->shift;
|
|
val &= clk_div_mask(div->width);
|
|
return divider_recalc_rate(hw, prate, val, div->table, div->flags,
|
|
div->width);
|
|
}
|
|
|
|
static long clk_regmap_div_round_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
/* if read only, just return current value */
|
|
if (div->flags & CLK_DIVIDER_READ_ONLY) {
|
|
ret = regmap_read(clk->map, div->offset, &val);
|
|
if (ret)
|
|
/* Gives a hint that something is wrong */
|
|
return 0;
|
|
|
|
val >>= div->shift;
|
|
val &= clk_div_mask(div->width);
|
|
|
|
return divider_ro_round_rate(hw, rate, prate, div->table,
|
|
div->width, div->flags, val);
|
|
}
|
|
|
|
return divider_round_rate(hw, rate, prate, div->table, div->width,
|
|
div->flags);
|
|
}
|
|
|
|
static int clk_regmap_div_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_div_data *div = clk_get_regmap_div_data(clk);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = divider_get_val(rate, parent_rate, div->table, div->width,
|
|
div->flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = (unsigned int)ret << div->shift;
|
|
return regmap_update_bits(clk->map, div->offset,
|
|
clk_div_mask(div->width) << div->shift, val);
|
|
};
|
|
|
|
/* Would prefer clk_regmap_div_ro_ops but clashes with qcom */
|
|
|
|
const struct clk_ops clk_regmap_divider_ops = {
|
|
.recalc_rate = clk_regmap_div_recalc_rate,
|
|
.round_rate = clk_regmap_div_round_rate,
|
|
.set_rate = clk_regmap_div_set_rate,
|
|
};
|
|
EXPORT_SYMBOL_GPL(clk_regmap_divider_ops);
|
|
|
|
const struct clk_ops clk_regmap_divider_ro_ops = {
|
|
.recalc_rate = clk_regmap_div_recalc_rate,
|
|
.round_rate = clk_regmap_div_round_rate,
|
|
};
|
|
EXPORT_SYMBOL_GPL(clk_regmap_divider_ro_ops);
|
|
|
|
static u8 clk_regmap_mux_get_parent(struct clk_hw *hw)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(clk->map, mux->offset, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val >>= mux->shift;
|
|
val &= mux->mask;
|
|
return clk_mux_val_to_index(hw, mux->table, mux->flags, val);
|
|
}
|
|
|
|
static int clk_regmap_mux_set_parent(struct clk_hw *hw, u8 index)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk);
|
|
unsigned int val = clk_mux_index_to_val(mux->table, mux->flags, index);
|
|
|
|
return regmap_update_bits(clk->map, mux->offset,
|
|
mux->mask << mux->shift,
|
|
val << mux->shift);
|
|
}
|
|
|
|
static int clk_regmap_mux_determine_rate(struct clk_hw *hw,
|
|
struct clk_rate_request *req)
|
|
{
|
|
struct clk_regmap *clk = to_clk_regmap(hw);
|
|
struct clk_regmap_mux_data *mux = clk_get_regmap_mux_data(clk);
|
|
|
|
return clk_mux_determine_rate_flags(hw, req, mux->flags);
|
|
}
|
|
|
|
const struct clk_ops clk_regmap_mux_ops = {
|
|
.get_parent = clk_regmap_mux_get_parent,
|
|
.set_parent = clk_regmap_mux_set_parent,
|
|
.determine_rate = clk_regmap_mux_determine_rate,
|
|
};
|
|
EXPORT_SYMBOL_GPL(clk_regmap_mux_ops);
|
|
|
|
const struct clk_ops clk_regmap_mux_ro_ops = {
|
|
.get_parent = clk_regmap_mux_get_parent,
|
|
};
|
|
EXPORT_SYMBOL_GPL(clk_regmap_mux_ro_ops);
|
|
|
|
MODULE_DESCRIPTION("Amlogic regmap backed clock driver");
|
|
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
|
|
MODULE_LICENSE("GPL v2");
|