lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
14
android_kernel_xiaomi_sm8350/drivers/scsi/mpt3sas/mpt3sas_config.c
Suganath Prabu S 2426f20903 scsi: mpt3sas: Enable interrupt coalescing on high iops 
Enable interrupt coalescing only on high iops queues.

In ioc config page 1, offset 0x14 (ProductSpecific field) is used to
determine interrupt coalescing enabled/disabled on per reply descriptor
post queue group(8) basis.  If 31st bit is zero, then interrupt coalescing
is enabled for all reply descriptor post queues. If 31st bit is set to one,
then user can enable/disable interrupt coalescing on per reply descriptor
post queue group(8) basis. So to enable interrupt coalescing only on first
reply descriptor post queue group (i.e. on high iops queues), set bit 0 and
31.

This configuration should reset during driver unload or shutdown to the
default settings. For this, the driver takes copy of default ioc page 1 and
copies back the default or unmodified ioc page1 during unload and
shutdown. This means that on next driver load (e.g. if older version driver
is loaded by user), current modified changes on ioc page1 won't take
effect.

Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18 19:46:26 -04:00

1847 lines
58 KiB
C
Raw Permalink Blame History

/*
* This module provides common API for accessing firmware configuration pages
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c
* Copyright (C) 2012-2014 LSI Corporation
* Copyright (C) 2013-2014 Avago Technologies
* (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/blkdev.h>
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include "mpt3sas_base.h"
/* local definitions */
/* Timeout for config page request (in seconds) */
#define MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT 15
/* Common sgl flags for READING a config page. */
#define MPT3_CONFIG_COMMON_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
| MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT)
/* Common sgl flags for WRITING a config page. */
#define MPT3_CONFIG_COMMON_WRITE_SGLFLAGS ((MPI2_SGE_FLAGS_SIMPLE_ELEMENT | \
MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER \
| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC) \
<< MPI2_SGE_FLAGS_SHIFT)
/**
* struct config_request - obtain dma memory via routine
* @sz: size
* @page: virt pointer
* @page_dma: phys pointer
*
*/
struct config_request {
u16 sz;
void *page;
dma_addr_t page_dma;
};
/**
* _config_display_some_debug - debug routine
* @ioc: per adapter object
* @smid: system request message index
* @calling_function_name: string pass from calling function
* @mpi_reply: reply message frame
* Context: none.
*
* Function for displaying debug info helpful when debugging issues
* in this module.
*/
static void
_config_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
{
Mpi2ConfigRequest_t *mpi_request;
char *desc = NULL;
if (!(ioc->logging_level & MPT_DEBUG_CONFIG))
return;
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
switch (mpi_request->Header.PageType & MPI2_CONFIG_PAGETYPE_MASK) {
case MPI2_CONFIG_PAGETYPE_IO_UNIT:
desc = "io_unit";
break;
case MPI2_CONFIG_PAGETYPE_IOC:
desc = "ioc";
break;
case MPI2_CONFIG_PAGETYPE_BIOS:
desc = "bios";
break;
case MPI2_CONFIG_PAGETYPE_RAID_VOLUME:
desc = "raid_volume";
break;
case MPI2_CONFIG_PAGETYPE_MANUFACTURING:
desc = "manufacturing";
break;
case MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK:
desc = "physdisk";
break;
case MPI2_CONFIG_PAGETYPE_EXTENDED:
switch (mpi_request->ExtPageType) {
case MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT:
desc = "sas_io_unit";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER:
desc = "sas_expander";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE:
desc = "sas_device";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_PHY:
desc = "sas_phy";
break;
case MPI2_CONFIG_EXTPAGETYPE_LOG:
desc = "log";
break;
case MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE:
desc = "enclosure";
break;
case MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG:
desc = "raid_config";
break;
case MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING:
desc = "driver_mapping";
break;
case MPI2_CONFIG_EXTPAGETYPE_SAS_PORT:
desc = "sas_port";
break;
case MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING:
desc = "ext_manufacturing";
break;
case MPI2_CONFIG_EXTPAGETYPE_PCIE_IO_UNIT:
desc = "pcie_io_unit";
break;
case MPI2_CONFIG_EXTPAGETYPE_PCIE_SWITCH:
desc = "pcie_switch";
break;
case MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE:
desc = "pcie_device";
break;
case MPI2_CONFIG_EXTPAGETYPE_PCIE_LINK:
desc = "pcie_link";
break;
}
break;
}
if (!desc)
return;
ioc_info(ioc, "%s: %s(%d), action(%d), form(0x%08x), smid(%d)\n",
calling_function_name, desc,
mpi_request->Header.PageNumber, mpi_request->Action,
le32_to_cpu(mpi_request->PageAddress), smid);
if (!mpi_reply)
return;
if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
}
/**
* _config_alloc_config_dma_memory - obtain physical memory
* @ioc: per adapter object
* @mem: struct config_request
*
* A wrapper for obtaining dma-able memory for config page request.
*
* Return: 0 for success, non-zero for failure.
*/
static int
_config_alloc_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
struct config_request *mem)
{
int r = 0;
if (mem->sz > ioc->config_page_sz) {
mem->page = dma_alloc_coherent(&ioc->pdev->dev, mem->sz,
&mem->page_dma, GFP_KERNEL);
if (!mem->page) {
ioc_err(ioc, "%s: dma_alloc_coherent failed asking for (%d) bytes!!\n",
__func__, mem->sz);
r = -ENOMEM;
}
} else { /* use tmp buffer if less than 512 bytes */
mem->page = ioc->config_page;
mem->page_dma = ioc->config_page_dma;
}
ioc->config_vaddr = mem->page;
return r;
}
/**
* _config_free_config_dma_memory - wrapper to free the memory
* @ioc: per adapter object
* @mem: struct config_request
*
* A wrapper to free dma-able memory when using _config_alloc_config_dma_memory.
*
* Return: 0 for success, non-zero for failure.
*/
static void
_config_free_config_dma_memory(struct MPT3SAS_ADAPTER *ioc,
struct config_request *mem)
{
if (mem->sz > ioc->config_page_sz)
dma_free_coherent(&ioc->pdev->dev, mem->sz, mem->page,
mem->page_dma);
}
/**
* mpt3sas_config_done - config page completion routine
* @ioc: per adapter object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using _config_request.
*
* Return: 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt3sas_config_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
if (ioc->config_cmds.status == MPT3_CMD_NOT_USED)
return 1;
if (ioc->config_cmds.smid != smid)
return 1;
ioc->config_cmds.status |= MPT3_CMD_COMPLETE;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
ioc->config_cmds.status |= MPT3_CMD_REPLY_VALID;
memcpy(ioc->config_cmds.reply, mpi_reply,
mpi_reply->MsgLength*4);
}
ioc->config_cmds.status &= ~MPT3_CMD_PENDING;
_config_display_some_debug(ioc, smid, "config_done", mpi_reply);
ioc->config_cmds.smid = USHRT_MAX;
complete(&ioc->config_cmds.done);
return 1;
}
/**
* _config_request - main routine for sending config page requests
* @ioc: per adapter object
* @mpi_request: request message frame
* @mpi_reply: reply mf payload returned from firmware
* @timeout: timeout in seconds
* @config_page: contents of the config page
* @config_page_sz: size of config page
* Context: sleep
*
* A generic API for config page requests to firmware.
*
* The ioc->config_cmds.status flag should be MPT3_CMD_NOT_USED before calling
* this API.
*
* The callback index is set inside `ioc->config_cb_idx.
*
* Return: 0 for success, non-zero for failure.
*/
static int
_config_request(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigRequest_t
*mpi_request, Mpi2ConfigReply_t *mpi_reply, int timeout,
void *config_page, u16 config_page_sz)
{
u16 smid;
Mpi2ConfigRequest_t *config_request;
int r;
u8 retry_count, issue_host_reset = 0;
struct config_request mem;
u32 ioc_status = UINT_MAX;
mutex_lock(&ioc->config_cmds.mutex);
if (ioc->config_cmds.status != MPT3_CMD_NOT_USED) {
ioc_err(ioc, "%s: config_cmd in use\n", __func__);
mutex_unlock(&ioc->config_cmds.mutex);
return -EAGAIN;
}
retry_count = 0;
memset(&mem, 0, sizeof(struct config_request));
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
if (config_page) {
mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
mpi_request->Header.PageType = mpi_reply->Header.PageType;
mpi_request->Header.PageLength = mpi_reply->Header.PageLength;
mpi_request->ExtPageLength = mpi_reply->ExtPageLength;
mpi_request->ExtPageType = mpi_reply->ExtPageType;
if (mpi_request->Header.PageLength)
mem.sz = mpi_request->Header.PageLength * 4;
else
mem.sz = le16_to_cpu(mpi_reply->ExtPageLength) * 4;
r = _config_alloc_config_dma_memory(ioc, &mem);
if (r != 0)
goto out;
if (mpi_request->Action ==
MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT ||
mpi_request->Action ==
MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM) {
ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
MPT3_CONFIG_COMMON_WRITE_SGLFLAGS | mem.sz,
mem.page_dma);
memcpy(mem.page, config_page, min_t(u16, mem.sz,
config_page_sz));
} else {
memset(config_page, 0, config_page_sz);
ioc->base_add_sg_single(&mpi_request->PageBufferSGE,
MPT3_CONFIG_COMMON_SGLFLAGS | mem.sz, mem.page_dma);
memset(mem.page, 0, min_t(u16, mem.sz, config_page_sz));
}
}
retry_config:
if (retry_count) {
if (retry_count > 2) { /* attempt only 2 retries */
r = -EFAULT;
goto free_mem;
}
ioc_info(ioc, "%s: attempting retry (%d)\n",
__func__, retry_count);
}
r = mpt3sas_wait_for_ioc(ioc, MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT);
if (r)
goto free_mem;
smid = mpt3sas_base_get_smid(ioc, ioc->config_cb_idx);
if (!smid) {
ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
ioc->config_cmds.status = MPT3_CMD_NOT_USED;
r = -EAGAIN;
goto free_mem;
}
r = 0;
memset(mpi_reply, 0, sizeof(Mpi2ConfigReply_t));
ioc->config_cmds.status = MPT3_CMD_PENDING;
config_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->config_cmds.smid = smid;
memcpy(config_request, mpi_request, sizeof(Mpi2ConfigRequest_t));
_config_display_some_debug(ioc, smid, "config_request", NULL);
init_completion(&ioc->config_cmds.done);
ioc->put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->config_cmds.done, timeout*HZ);
if (!(ioc->config_cmds.status & MPT3_CMD_COMPLETE)) {
mpt3sas_base_check_cmd_timeout(ioc,
ioc->config_cmds.status, mpi_request,
sizeof(Mpi2ConfigRequest_t)/4);
retry_count++;
if (ioc->config_cmds.smid == smid)
mpt3sas_base_free_smid(ioc, smid);
if ((ioc->shost_recovery) || (ioc->config_cmds.status &
MPT3_CMD_RESET) || ioc->pci_error_recovery)
goto retry_config;
issue_host_reset = 1;
r = -EFAULT;
goto free_mem;
}
if (ioc->config_cmds.status & MPT3_CMD_REPLY_VALID) {
memcpy(mpi_reply, ioc->config_cmds.reply,
sizeof(Mpi2ConfigReply_t));
/* Reply Frame Sanity Checks to workaround FW issues */
if ((mpi_request->Header.PageType & 0xF) !=
(mpi_reply->Header.PageType & 0xF)) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n",
ioc->name, __func__,
mpi_request->Header.PageType & 0xF,
mpi_reply->Header.PageType & 0xF);
}
if (((mpi_request->Header.PageType & 0xF) ==
MPI2_CONFIG_PAGETYPE_EXTENDED) &&
mpi_request->ExtPageType != mpi_reply->ExtPageType) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
panic("%s: %s: Firmware BUG: mpi_reply mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n",
ioc->name, __func__,
mpi_request->ExtPageType,
mpi_reply->ExtPageType);
}
ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
& MPI2_IOCSTATUS_MASK;
}
if (retry_count)
ioc_info(ioc, "%s: retry (%d) completed!!\n",
__func__, retry_count);
if ((ioc_status == MPI2_IOCSTATUS_SUCCESS) &&
config_page && mpi_request->Action ==
MPI2_CONFIG_ACTION_PAGE_READ_CURRENT) {
u8 *p = (u8 *)mem.page;
/* Config Page Sanity Checks to workaround FW issues */
if (p) {
if ((mpi_request->Header.PageType & 0xF) !=
(p[3] & 0xF)) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
_debug_dump_config(p, min_t(u16, mem.sz,
config_page_sz)/4);
panic("%s: %s: Firmware BUG: config page mismatch: Requested PageType(0x%02x) Reply PageType(0x%02x)\n",
ioc->name, __func__,
mpi_request->Header.PageType & 0xF,
p[3] & 0xF);
}
if (((mpi_request->Header.PageType & 0xF) ==
MPI2_CONFIG_PAGETYPE_EXTENDED) &&
(mpi_request->ExtPageType != p[6])) {
_debug_dump_mf(mpi_request, ioc->request_sz/4);
_debug_dump_reply(mpi_reply, ioc->request_sz/4);
_debug_dump_config(p, min_t(u16, mem.sz,
config_page_sz)/4);
panic("%s: %s: Firmware BUG: config page mismatch: Requested ExtPageType(0x%02x) Reply ExtPageType(0x%02x)\n",
ioc->name, __func__,
mpi_request->ExtPageType, p[6]);
}
}
memcpy(config_page, mem.page, min_t(u16, mem.sz,
config_page_sz));
}
free_mem:
if (config_page)
_config_free_config_dma_memory(ioc, &mem);
out:
ioc->config_cmds.status = MPT3_CMD_NOT_USED;
mutex_unlock(&ioc->config_cmds.mutex);
if (issue_host_reset)
mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg0 - obtain manufacturing page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg7 - obtain manufacturing page 7
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg7(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage7_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 7;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING7_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sz);
out:
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg10 - obtain manufacturing page 10
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg10(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply,
struct Mpi2ManufacturingPage10_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 10;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_manufacturing_pg11 - obtain manufacturing page 11
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply,
struct Mpi2ManufacturingPage11_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 11;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_set_manufacturing_pg11 - set manufacturing page 11
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_manufacturing_pg11(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply,
struct Mpi2ManufacturingPage11_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_MANUFACTURING;
mpi_request.Header.PageNumber = 11;
mpi_request.Header.PageVersion = MPI2_MANUFACTURING0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_bios_pg2 - obtain bios page 2
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_bios_pg2(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2BiosPage2_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
mpi_request.Header.PageNumber = 2;
mpi_request.Header.PageVersion = MPI2_BIOSPAGE2_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_bios_pg3 - obtain bios page 3
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_bios_pg3(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2BiosPage3_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_BIOS;
mpi_request.Header.PageNumber = 3;
mpi_request.Header.PageVersion = MPI2_BIOSPAGE3_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg0 - obtain iounit page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage0_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg1 - obtain iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_set_iounit_pg1 - set iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage1_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg3 - obtain iounit page 3
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg3(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 3;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE3_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_iounit_pg8 - obtain iounit page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_iounit_pg8(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IO_UNIT;
mpi_request.Header.PageNumber = 8;
mpi_request.Header.PageVersion = MPI2_IOUNITPAGE8_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_ioc_pg8 - obtain ioc page 8
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_ioc_pg8(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage8_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
mpi_request.Header.PageNumber = 8;
mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_ioc_pg1 - obtain ioc page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_ioc_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_set_ioc_pg1 - modify ioc page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_ioc_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2IOCPage1_t *config_page)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_IOC;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_IOCPAGE8_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_sas_device_pg0 - obtain sas device page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_device_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage0_t *config_page,
u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
mpi_request.Header.PageVersion = MPI2_SASDEVICE0_PAGEVERSION;
mpi_request.Header.PageNumber = 0;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_sas_device_pg1 - obtain sas device page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_device_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasDevicePage1_t *config_page,
u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE;
mpi_request.Header.PageVersion = MPI2_SASDEVICE1_PAGEVERSION;
mpi_request.Header.PageNumber = 1;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_pcie_device_pg0 - obtain pcie device page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_pcie_device_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage0_t *config_page,
u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
mpi_request.Header.PageVersion = MPI26_PCIEDEVICE0_PAGEVERSION;
mpi_request.Header.PageNumber = 0;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_pcie_device_pg2 - obtain pcie device page 2
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: device handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_pcie_device_pg2(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi26PCIeDevicePage2_t *config_page,
u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_PCIE_DEVICE;
mpi_request.Header.PageVersion = MPI26_PCIEDEVICE2_PAGEVERSION;
mpi_request.Header.PageNumber = 2;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_number_hba_phys - obtain number of phys on the host
* @ioc: per adapter object
* @num_phys: pointer returned with the number of phys
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_number_hba_phys(struct MPT3SAS_ADAPTER *ioc, u8 *num_phys)
{
Mpi2ConfigRequest_t mpi_request;
int r;
u16 ioc_status;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t config_page;
*num_phys = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
sizeof(Mpi2SasIOUnitPage0_t));
if (!r) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
*num_phys = config_page.NumPhys;
}
out:
return r;
}
/**
* mpt3sas_config_get_sas_iounit_pg0 - obtain sas iounit page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Calling function should call config_get_number_hba_phys prior to
* this function, so enough memory is allocated for config_page.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_iounit_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage0_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_sas_iounit_pg1 - obtain sas iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Calling function should call config_get_number_hba_phys prior to
* this function, so enough memory is allocated for config_page.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_set_sas_iounit_pg1 - send sas iounit page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Calling function should call config_get_number_hba_phys prior to
* this function, so enough memory is allocated for config_page.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_set_sas_iounit_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page,
u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASIOUNITPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT;
_config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_expander_pg0 - obtain expander page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: expander handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_expander_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASEXPANDER0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_expander_pg1 - obtain expander page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @phy_number: phy number
* @handle: expander handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_expander_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number,
u16 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASEXPANDER1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM |
(phy_number << MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT) | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_enclosure_pg0 - obtain enclosure page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: expander handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_enclosure_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASENCLOSURE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_phy_pg0 - obtain phy page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @phy_number: phy number
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_phy_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_SASPHY0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_phy_pg1 - obtain phy page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @phy_number: phy number
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_phy_pg1(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_SAS_PHY;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_SASPHY1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER | phy_number);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_raid_volume_pg1 - obtain raid volume page 1
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: volume handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_raid_volume_pg1(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form,
u32 handle)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
mpi_request.Header.PageNumber = 1;
mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE1_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_number_pds - obtain number of phys disk assigned to volume
* @ioc: per adapter object
* @handle: volume handle
* @num_pds: returns pds count
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_number_pds(struct MPT3SAS_ADAPTER *ioc, u16 handle,
u8 *num_pds)
{
Mpi2ConfigRequest_t mpi_request;
Mpi2RaidVolPage0_t config_page;
Mpi2ConfigReply_t mpi_reply;
int r;
u16 ioc_status;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
*num_pds = 0;
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress =
cpu_to_le32(MPI2_RAID_VOLUME_PGAD_FORM_HANDLE | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, &config_page,
sizeof(Mpi2RaidVolPage0_t));
if (!r) {
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS)
*num_pds = config_page.NumPhysDisks;
}
out:
return r;
}
/**
* mpt3sas_config_get_raid_volume_pg0 - obtain raid volume page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_HANDLE or HANDLE
* @handle: volume handle
* @sz: size of buffer passed in config_page
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_raid_volume_pg0(struct MPT3SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form,
u32 handle, u16 sz)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_VOLUME;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_RAIDVOLPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | handle);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page, sz);
out:
return r;
}
/**
* mpt3sas_config_get_phys_disk_pg0 - obtain phys disk page 0
* @ioc: per adapter object
* @mpi_reply: reply mf payload returned from firmware
* @config_page: contents of the config page
* @form: GET_NEXT_PHYSDISKNUM, PHYSDISKNUM, DEVHANDLE
* @form_specific: specific to the form
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_phys_disk_pg0(struct MPT3SAS_ADAPTER *ioc, Mpi2ConfigReply_t
*mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
u32 form_specific)
{
Mpi2ConfigRequest_t mpi_request;
int r;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK;
mpi_request.Header.PageNumber = 0;
mpi_request.Header.PageVersion = MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.PageAddress = cpu_to_le32(form | form_specific);
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
r = _config_request(ioc, &mpi_request, mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
sizeof(*config_page));
out:
return r;
}
/**
* mpt3sas_config_get_volume_handle - returns volume handle for give hidden
* raid components
* @ioc: per adapter object
* @pd_handle: phys disk handle
* @volume_handle: volume handle
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_volume_handle(struct MPT3SAS_ADAPTER *ioc, u16 pd_handle,
u16 *volume_handle)
{
Mpi2RaidConfigurationPage0_t *config_page = NULL;
Mpi2ConfigRequest_t mpi_request;
Mpi2ConfigReply_t mpi_reply;
int r, i, config_page_sz;
u16 ioc_status;
int config_num;
u16 element_type;
u16 phys_disk_dev_handle;
*volume_handle = 0;
memset(&mpi_request, 0, sizeof(Mpi2ConfigRequest_t));
mpi_request.Function = MPI2_FUNCTION_CONFIG;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_HEADER;
mpi_request.Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
mpi_request.ExtPageType = MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG;
mpi_request.Header.PageVersion = MPI2_RAIDCONFIG0_PAGEVERSION;
mpi_request.Header.PageNumber = 0;
ioc->build_zero_len_sge_mpi(ioc, &mpi_request.PageBufferSGE);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, NULL, 0);
if (r)
goto out;
mpi_request.Action = MPI2_CONFIG_ACTION_PAGE_READ_CURRENT;
config_page_sz = (le16_to_cpu(mpi_reply.ExtPageLength) * 4);
config_page = kmalloc(config_page_sz, GFP_KERNEL);
if (!config_page) {
r = -1;
goto out;
}
config_num = 0xff;
while (1) {
mpi_request.PageAddress = cpu_to_le32(config_num +
MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM);
r = _config_request(ioc, &mpi_request, &mpi_reply,
MPT3_CONFIG_PAGE_DEFAULT_TIMEOUT, config_page,
config_page_sz);
if (r)
goto out;
r = -1;
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
MPI2_IOCSTATUS_MASK;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
goto out;
for (i = 0; i < config_page->NumElements; i++) {
element_type = le16_to_cpu(config_page->
ConfigElement[i].ElementFlags) &
MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE;
if (element_type ==
MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT ||
element_type ==
MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT) {
phys_disk_dev_handle =
le16_to_cpu(config_page->ConfigElement[i].
PhysDiskDevHandle);
if (phys_disk_dev_handle == pd_handle) {
*volume_handle =
le16_to_cpu(config_page->
ConfigElement[i].VolDevHandle);
r = 0;
goto out;
}
} else if (element_type ==
MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT) {
*volume_handle = 0;
r = 0;
goto out;
}
}
config_num = config_page->ConfigNum;
}
out:
kfree(config_page);
return r;
}
/**
* mpt3sas_config_get_volume_wwid - returns wwid given the volume handle
* @ioc: per adapter object
* @volume_handle: volume handle
* @wwid: volume wwid
* Context: sleep.
*
* Return: 0 for success, non-zero for failure.
*/
int
mpt3sas_config_get_volume_wwid(struct MPT3SAS_ADAPTER *ioc, u16 volume_handle,
u64 *wwid)
{
Mpi2ConfigReply_t mpi_reply;
Mpi2RaidVolPage1_t raid_vol_pg1;
*wwid = 0;
if (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
&raid_vol_pg1, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE,
volume_handle))) {
*wwid = le64_to_cpu(raid_vol_pg1.WWID);
return 0;
} else
return -1;
}
Reference in New Issue View Git Blame Copy Permalink