android_kernel_xiaomi_sm8350/kernel/sched/pelt.c
Qais Yousef 8de6242cca sched/debug: Add new tracepoint to track PELT at se level
The new tracepoint allows tracking PELT signals at sched_entity level.
Which is supported in CFS tasks and taskgroups only.

Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-5-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24 19:23:42 +02:00

406 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Per Entity Load Tracking
*
* Copyright (C) 2007 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
*
* Interactivity improvements by Mike Galbraith
* (C) 2007 Mike Galbraith <efault@gmx.de>
*
* Various enhancements by Dmitry Adamushko.
* (C) 2007 Dmitry Adamushko <dmitry.adamushko@gmail.com>
*
* Group scheduling enhancements by Srivatsa Vaddagiri
* Copyright IBM Corporation, 2007
* Author: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
*
* Scaled math optimizations by Thomas Gleixner
* Copyright (C) 2007, Thomas Gleixner <tglx@linutronix.de>
*
* Adaptive scheduling granularity, math enhancements by Peter Zijlstra
* Copyright (C) 2007 Red Hat, Inc., Peter Zijlstra
*
* Move PELT related code from fair.c into this pelt.c file
* Author: Vincent Guittot <vincent.guittot@linaro.org>
*/
#include <linux/sched.h>
#include "sched.h"
#include "pelt.h"
#include <trace/events/sched.h>
/*
* Approximate:
* val * y^n, where y^32 ~= 0.5 (~1 scheduling period)
*/
static u64 decay_load(u64 val, u64 n)
{
unsigned int local_n;
if (unlikely(n > LOAD_AVG_PERIOD * 63))
return 0;
/* after bounds checking we can collapse to 32-bit */
local_n = n;
/*
* As y^PERIOD = 1/2, we can combine
* y^n = 1/2^(n/PERIOD) * y^(n%PERIOD)
* With a look-up table which covers y^n (n<PERIOD)
*
* To achieve constant time decay_load.
*/
if (unlikely(local_n >= LOAD_AVG_PERIOD)) {
val >>= local_n / LOAD_AVG_PERIOD;
local_n %= LOAD_AVG_PERIOD;
}
val = mul_u64_u32_shr(val, runnable_avg_yN_inv[local_n], 32);
return val;
}
static u32 __accumulate_pelt_segments(u64 periods, u32 d1, u32 d3)
{
u32 c1, c2, c3 = d3; /* y^0 == 1 */
/*
* c1 = d1 y^p
*/
c1 = decay_load((u64)d1, periods);
/*
* p-1
* c2 = 1024 \Sum y^n
* n=1
*
* inf inf
* = 1024 ( \Sum y^n - \Sum y^n - y^0 )
* n=0 n=p
*/
c2 = LOAD_AVG_MAX - decay_load(LOAD_AVG_MAX, periods) - 1024;
return c1 + c2 + c3;
}
#define cap_scale(v, s) ((v)*(s) >> SCHED_CAPACITY_SHIFT)
/*
* Accumulate the three separate parts of the sum; d1 the remainder
* of the last (incomplete) period, d2 the span of full periods and d3
* the remainder of the (incomplete) current period.
*
* d1 d2 d3
* ^ ^ ^
* | | |
* |<->|<----------------->|<--->|
* ... |---x---|------| ... |------|-----x (now)
*
* p-1
* u' = (u + d1) y^p + 1024 \Sum y^n + d3 y^0
* n=1
*
* = u y^p + (Step 1)
*
* p-1
* d1 y^p + 1024 \Sum y^n + d3 y^0 (Step 2)
* n=1
*/
static __always_inline u32
accumulate_sum(u64 delta, struct sched_avg *sa,
unsigned long load, unsigned long runnable, int running)
{
u32 contrib = (u32)delta; /* p == 0 -> delta < 1024 */
u64 periods;
delta += sa->period_contrib;
periods = delta / 1024; /* A period is 1024us (~1ms) */
/*
* Step 1: decay old *_sum if we crossed period boundaries.
*/
if (periods) {
sa->load_sum = decay_load(sa->load_sum, periods);
sa->runnable_load_sum =
decay_load(sa->runnable_load_sum, periods);
sa->util_sum = decay_load((u64)(sa->util_sum), periods);
/*
* Step 2
*/
delta %= 1024;
contrib = __accumulate_pelt_segments(periods,
1024 - sa->period_contrib, delta);
}
sa->period_contrib = delta;
if (load)
sa->load_sum += load * contrib;
if (runnable)
sa->runnable_load_sum += runnable * contrib;
if (running)
sa->util_sum += contrib << SCHED_CAPACITY_SHIFT;
return periods;
}
/*
* We can represent the historical contribution to runnable average as the
* coefficients of a geometric series. To do this we sub-divide our runnable
* history into segments of approximately 1ms (1024us); label the segment that
* occurred N-ms ago p_N, with p_0 corresponding to the current period, e.g.
*
* [<- 1024us ->|<- 1024us ->|<- 1024us ->| ...
* p0 p1 p2
* (now) (~1ms ago) (~2ms ago)
*
* Let u_i denote the fraction of p_i that the entity was runnable.
*
* We then designate the fractions u_i as our co-efficients, yielding the
* following representation of historical load:
* u_0 + u_1*y + u_2*y^2 + u_3*y^3 + ...
*
* We choose y based on the with of a reasonably scheduling period, fixing:
* y^32 = 0.5
*
* This means that the contribution to load ~32ms ago (u_32) will be weighted
* approximately half as much as the contribution to load within the last ms
* (u_0).
*
* When a period "rolls over" and we have new u_0`, multiplying the previous
* sum again by y is sufficient to update:
* load_avg = u_0` + y*(u_0 + u_1*y + u_2*y^2 + ... )
* = u_0 + u_1*y + u_2*y^2 + ... [re-labeling u_i --> u_{i+1}]
*/
static __always_inline int
___update_load_sum(u64 now, struct sched_avg *sa,
unsigned long load, unsigned long runnable, int running)
{
u64 delta;
delta = now - sa->last_update_time;
/*
* This should only happen when time goes backwards, which it
* unfortunately does during sched clock init when we swap over to TSC.
*/
if ((s64)delta < 0) {
sa->last_update_time = now;
return 0;
}
/*
* Use 1024ns as the unit of measurement since it's a reasonable
* approximation of 1us and fast to compute.
*/
delta >>= 10;
if (!delta)
return 0;
sa->last_update_time += delta << 10;
/*
* running is a subset of runnable (weight) so running can't be set if
* runnable is clear. But there are some corner cases where the current
* se has been already dequeued but cfs_rq->curr still points to it.
* This means that weight will be 0 but not running for a sched_entity
* but also for a cfs_rq if the latter becomes idle. As an example,
* this happens during idle_balance() which calls
* update_blocked_averages()
*/
if (!load)
runnable = running = 0;
/*
* Now we know we crossed measurement unit boundaries. The *_avg
* accrues by two steps:
*
* Step 1: accumulate *_sum since last_update_time. If we haven't
* crossed period boundaries, finish.
*/
if (!accumulate_sum(delta, sa, load, runnable, running))
return 0;
return 1;
}
static __always_inline void
___update_load_avg(struct sched_avg *sa, unsigned long load, unsigned long runnable)
{
u32 divider = LOAD_AVG_MAX - 1024 + sa->period_contrib;
/*
* Step 2: update *_avg.
*/
sa->load_avg = div_u64(load * sa->load_sum, divider);
sa->runnable_load_avg = div_u64(runnable * sa->runnable_load_sum, divider);
WRITE_ONCE(sa->util_avg, sa->util_sum / divider);
}
/*
* sched_entity:
*
* task:
* se_runnable() == se_weight()
*
* group: [ see update_cfs_group() ]
* se_weight() = tg->weight * grq->load_avg / tg->load_avg
* se_runnable() = se_weight(se) * grq->runnable_load_avg / grq->load_avg
*
* load_sum := runnable_sum
* load_avg = se_weight(se) * runnable_avg
*
* runnable_load_sum := runnable_sum
* runnable_load_avg = se_runnable(se) * runnable_avg
*
* XXX collapse load_sum and runnable_load_sum
*
* cfq_rq:
*
* load_sum = \Sum se_weight(se) * se->avg.load_sum
* load_avg = \Sum se->avg.load_avg
*
* runnable_load_sum = \Sum se_runnable(se) * se->avg.runnable_load_sum
* runnable_load_avg = \Sum se->avg.runable_load_avg
*/
int __update_load_avg_blocked_se(u64 now, struct sched_entity *se)
{
if (___update_load_sum(now, &se->avg, 0, 0, 0)) {
___update_load_avg(&se->avg, se_weight(se), se_runnable(se));
trace_pelt_se_tp(se);
return 1;
}
return 0;
}
int __update_load_avg_se(u64 now, struct cfs_rq *cfs_rq, struct sched_entity *se)
{
if (___update_load_sum(now, &se->avg, !!se->on_rq, !!se->on_rq,
cfs_rq->curr == se)) {
___update_load_avg(&se->avg, se_weight(se), se_runnable(se));
cfs_se_util_change(&se->avg);
trace_pelt_se_tp(se);
return 1;
}
return 0;
}
int __update_load_avg_cfs_rq(u64 now, struct cfs_rq *cfs_rq)
{
if (___update_load_sum(now, &cfs_rq->avg,
scale_load_down(cfs_rq->load.weight),
scale_load_down(cfs_rq->runnable_weight),
cfs_rq->curr != NULL)) {
___update_load_avg(&cfs_rq->avg, 1, 1);
trace_pelt_cfs_tp(cfs_rq);
return 1;
}
return 0;
}
/*
* rt_rq:
*
* util_sum = \Sum se->avg.util_sum but se->avg.util_sum is not tracked
* util_sum = cpu_scale * load_sum
* runnable_load_sum = load_sum
*
* load_avg and runnable_load_avg are not supported and meaningless.
*
*/
int update_rt_rq_load_avg(u64 now, struct rq *rq, int running)
{
if (___update_load_sum(now, &rq->avg_rt,
running,
running,
running)) {
___update_load_avg(&rq->avg_rt, 1, 1);
trace_pelt_rt_tp(rq);
return 1;
}
return 0;
}
/*
* dl_rq:
*
* util_sum = \Sum se->avg.util_sum but se->avg.util_sum is not tracked
* util_sum = cpu_scale * load_sum
* runnable_load_sum = load_sum
*
*/
int update_dl_rq_load_avg(u64 now, struct rq *rq, int running)
{
if (___update_load_sum(now, &rq->avg_dl,
running,
running,
running)) {
___update_load_avg(&rq->avg_dl, 1, 1);
trace_pelt_dl_tp(rq);
return 1;
}
return 0;
}
#ifdef CONFIG_HAVE_SCHED_AVG_IRQ
/*
* irq:
*
* util_sum = \Sum se->avg.util_sum but se->avg.util_sum is not tracked
* util_sum = cpu_scale * load_sum
* runnable_load_sum = load_sum
*
*/
int update_irq_load_avg(struct rq *rq, u64 running)
{
int ret = 0;
/*
* We can't use clock_pelt because irq time is not accounted in
* clock_task. Instead we directly scale the running time to
* reflect the real amount of computation
*/
running = cap_scale(running, arch_scale_freq_capacity(cpu_of(rq)));
running = cap_scale(running, arch_scale_cpu_capacity(cpu_of(rq)));
/*
* We know the time that has been used by interrupt since last update
* but we don't when. Let be pessimistic and assume that interrupt has
* happened just before the update. This is not so far from reality
* because interrupt will most probably wake up task and trig an update
* of rq clock during which the metric is updated.
* We start to decay with normal context time and then we add the
* interrupt context time.
* We can safely remove running from rq->clock because
* rq->clock += delta with delta >= running
*/
ret = ___update_load_sum(rq->clock - running, &rq->avg_irq,
0,
0,
0);
ret += ___update_load_sum(rq->clock, &rq->avg_irq,
1,
1,
1);
if (ret) {
___update_load_avg(&rq->avg_irq, 1, 1);
trace_pelt_irq_tp(rq);
}
return ret;
}
#endif