android_kernel_xiaomi_sm8350/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
Russell King a09e64fbc0 [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
This just leaves include/asm-arm/plat-* to deal with.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-07 09:55:48 +01:00

426 lines
10 KiB
C

/* arch/arm/mach-lh7a40x/arch-lpd7a40x.c
*
* Copyright (C) 2004 Logic Product Development
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include "common.h"
#define CPLD_INT_NETHERNET (1<<0)
#define CPLD_INTMASK_ETHERNET (1<<2)
#if defined (CONFIG_MACH_LPD7A400)
# define CPLD_INT_NTOUCH (1<<1)
# define CPLD_INTMASK_TOUCH (1<<3)
# define CPLD_INT_PEN (1<<4)
# define CPLD_INTMASK_PEN (1<<4)
# define CPLD_INT_PIRQ (1<<4)
#endif
#define CPLD_INTMASK_CPLD (1<<7)
#define CPLD_INT_CPLD (1<<6)
#define CPLD_CONTROL_SWINT (1<<7) /* Disable all CPLD IRQs */
#define CPLD_CONTROL_OCMSK (1<<6) /* Mask USB1 connect IRQ */
#define CPLD_CONTROL_PDRV (1<<5) /* PCC_nDRV high */
#define CPLD_CONTROL_USB1C (1<<4) /* USB1 connect IRQ active */
#define CPLD_CONTROL_USB1P (1<<3) /* USB1 power disable */
#define CPLD_CONTROL_AWKP (1<<2) /* Auto-wakeup disabled */
#define CPLD_CONTROL_LCD_ENABLE (1<<1) /* LCD Vee enable */
#define CPLD_CONTROL_WRLAN_NENABLE (1<<0) /* SMC91x power disable */
static struct resource smc91x_resources[] = {
[0] = {
.start = CPLD00_PHYS,
.end = CPLD00_PHYS + CPLD00_SIZE - 1, /* Only needs 16B */
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LPD7A40X_ETH_INT,
.end = IRQ_LPD7A40X_ETH_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct resource lh7a40x_usbclient_resources[] = {
[0] = {
.start = USB_PHYS,
.end = (USB_PHYS + PAGE_SIZE),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USB,
.end = IRQ_USB,
.flags = IORESOURCE_IRQ,
},
};
static u64 lh7a40x_usbclient_dma_mask = 0xffffffffUL;
static struct platform_device lh7a40x_usbclient_device = {
// .name = "lh7a40x_udc",
.name = "lh7-udc",
.id = 0,
.dev = {
.dma_mask = &lh7a40x_usbclient_dma_mask,
.coherent_dma_mask = 0xffffffffUL,
},
.num_resources = ARRAY_SIZE (lh7a40x_usbclient_resources),
.resource = lh7a40x_usbclient_resources,
};
#if defined (CONFIG_ARCH_LH7A404)
static struct resource lh7a404_usbhost_resources [] = {
[0] = {
.start = USBH_PHYS,
.end = (USBH_PHYS + 0xFF),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USHINTR,
.end = IRQ_USHINTR,
.flags = IORESOURCE_IRQ,
},
};
static u64 lh7a404_usbhost_dma_mask = 0xffffffffUL;
static struct platform_device lh7a404_usbhost_device = {
.name = "lh7a404-ohci",
.id = 0,
.dev = {
.dma_mask = &lh7a404_usbhost_dma_mask,
.coherent_dma_mask = 0xffffffffUL,
},
.num_resources = ARRAY_SIZE (lh7a404_usbhost_resources),
.resource = lh7a404_usbhost_resources,
};
#endif
static struct platform_device* lpd7a40x_devs[] __initdata = {
&smc91x_device,
&lh7a40x_usbclient_device,
#if defined (CONFIG_ARCH_LH7A404)
&lh7a404_usbhost_device,
#endif
};
extern void lpd7a400_map_io (void);
static void __init lpd7a40x_init (void)
{
#if defined (CONFIG_MACH_LPD7A400)
CPLD_CONTROL |= 0
| CPLD_CONTROL_SWINT /* Disable software interrupt */
| CPLD_CONTROL_OCMSK; /* Mask USB1 connection IRQ */
CPLD_CONTROL &= ~(0
| CPLD_CONTROL_LCD_ENABLE /* Disable LCD */
| CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */
);
#endif
#if defined (CONFIG_MACH_LPD7A404)
CPLD_CONTROL &= ~(0
| CPLD_CONTROL_WRLAN_NENABLE /* Enable SMC91x */
);
#endif
platform_add_devices (lpd7a40x_devs, ARRAY_SIZE (lpd7a40x_devs));
#if defined (CONFIG_FB_ARMCLCD)
lh7a40x_clcd_init ();
#endif
}
static void lh7a40x_ack_cpld_irq (u32 irq)
{
/* CPLD doesn't have ack capability, but some devices may */
#if defined (CPLD_INTMASK_TOUCH)
/* The touch control *must* mask the interrupt because the
* interrupt bit is read by the driver to determine if the pen
* is still down. */
if (irq == IRQ_TOUCH)
CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
#endif
}
static void lh7a40x_mask_cpld_irq (u32 irq)
{
switch (irq) {
case IRQ_LPD7A40X_ETH_INT:
CPLD_INTERRUPTS |= CPLD_INTMASK_ETHERNET;
break;
#if defined (IRQ_TOUCH)
case IRQ_TOUCH:
CPLD_INTERRUPTS |= CPLD_INTMASK_TOUCH;
break;
#endif
}
}
static void lh7a40x_unmask_cpld_irq (u32 irq)
{
switch (irq) {
case IRQ_LPD7A40X_ETH_INT:
CPLD_INTERRUPTS &= ~CPLD_INTMASK_ETHERNET;
break;
#if defined (IRQ_TOUCH)
case IRQ_TOUCH:
CPLD_INTERRUPTS &= ~CPLD_INTMASK_TOUCH;
break;
#endif
}
}
static struct irq_chip lpd7a40x_cpld_chip = {
.name = "CPLD",
.ack = lh7a40x_ack_cpld_irq,
.mask = lh7a40x_mask_cpld_irq,
.unmask = lh7a40x_unmask_cpld_irq,
};
static void lpd7a40x_cpld_handler (unsigned int irq, struct irq_desc *desc)
{
unsigned int mask = CPLD_INTERRUPTS;
desc->chip->ack (irq);
if ((mask & (1<<0)) == 0) /* WLAN */
IRQ_DISPATCH (IRQ_LPD7A40X_ETH_INT);
#if defined (IRQ_TOUCH)
if ((mask & (1<<1)) == 0) /* Touch */
IRQ_DISPATCH (IRQ_TOUCH);
#endif
desc->chip->unmask (irq); /* Level-triggered need this */
}
void __init lh7a40x_init_board_irq (void)
{
int irq;
/* Rev A (v2.8): PF0, PF1, PF2, and PF3 are available IRQs.
PF7 supports the CPLD.
Rev B (v3.4): PF0, PF1, and PF2 are available IRQs.
PF3 supports the CPLD.
(Some) LPD7A404 prerelease boards report a version
number of 0x16, but we force an override since the
hardware is of the newer variety.
*/
unsigned char cpld_version = CPLD_REVISION;
int pinCPLD = (cpld_version == 0x28) ? 7 : 3;
#if defined CONFIG_MACH_LPD7A404
cpld_version = 0x34; /* Coerce LPD7A404 to RevB */
#endif
/* First, configure user controlled GPIOF interrupts */
GPIO_PFDD &= ~0x0f; /* PF0-3 are inputs */
GPIO_INTTYPE1 &= ~0x0f; /* PF0-3 are level triggered */
GPIO_INTTYPE2 &= ~0x0f; /* PF0-3 are active low */
barrier ();
GPIO_GPIOFINTEN |= 0x0f; /* Enable PF0, PF1, PF2, and PF3 IRQs */
/* Then, configure CPLD interrupt */
/* Disable all CPLD interrupts */
#if defined (CONFIG_MACH_LPD7A400)
CPLD_INTERRUPTS = CPLD_INTMASK_TOUCH | CPLD_INTMASK_PEN
| CPLD_INTMASK_ETHERNET;
/* *** FIXME: don't know why we need 7 and 4. 7 is way wrong
and 4 is uncefined. */
// (1<<7)|(1<<4)|(1<<3)|(1<<2);
#endif
#if defined (CONFIG_MACH_LPD7A404)
CPLD_INTERRUPTS = CPLD_INTMASK_ETHERNET;
/* *** FIXME: don't know why we need 6 and 5, neither is defined. */
// (1<<6)|(1<<5)|(1<<3);
#endif
GPIO_PFDD &= ~(1 << pinCPLD); /* Make input */
GPIO_INTTYPE1 &= ~(1 << pinCPLD); /* Level triggered */
GPIO_INTTYPE2 &= ~(1 << pinCPLD); /* Active low */
barrier ();
GPIO_GPIOFINTEN |= (1 << pinCPLD); /* Enable */
/* Cascade CPLD interrupts */
for (irq = IRQ_BOARD_START;
irq < IRQ_BOARD_START + NR_IRQ_BOARD; ++irq) {
set_irq_chip (irq, &lpd7a40x_cpld_chip);
set_irq_handler (irq, handle_level_irq);
set_irq_flags (irq, IRQF_VALID);
}
set_irq_chained_handler ((cpld_version == 0x28)
? IRQ_CPLD_V28
: IRQ_CPLD_V34,
lpd7a40x_cpld_handler);
}
static struct map_desc lpd7a40x_io_desc[] __initdata = {
{
.virtual = IO_VIRT,
.pfn = __phys_to_pfn(IO_PHYS),
.length = IO_SIZE,
.type = MT_DEVICE
},
{ /* Mapping added to work around chip select problems */
.virtual = IOBARRIER_VIRT,
.pfn = __phys_to_pfn(IOBARRIER_PHYS),
.length = IOBARRIER_SIZE,
.type = MT_DEVICE
},
{
.virtual = CF_VIRT,
.pfn = __phys_to_pfn(CF_PHYS),
.length = CF_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD02_VIRT,
.pfn = __phys_to_pfn(CPLD02_PHYS),
.length = CPLD02_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD06_VIRT,
.pfn = __phys_to_pfn(CPLD06_PHYS),
.length = CPLD06_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD08_VIRT,
.pfn = __phys_to_pfn(CPLD08_PHYS),
.length = CPLD08_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD08_VIRT,
.pfn = __phys_to_pfn(CPLD08_PHYS),
.length = CPLD08_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD0A_VIRT,
.pfn = __phys_to_pfn(CPLD0A_PHYS),
.length = CPLD0A_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD0C_VIRT,
.pfn = __phys_to_pfn(CPLD0C_PHYS),
.length = CPLD0C_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD0E_VIRT,
.pfn = __phys_to_pfn(CPLD0E_PHYS),
.length = CPLD0E_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD10_VIRT,
.pfn = __phys_to_pfn(CPLD10_PHYS),
.length = CPLD10_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD12_VIRT,
.pfn = __phys_to_pfn(CPLD12_PHYS),
.length = CPLD12_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD14_VIRT,
.pfn = __phys_to_pfn(CPLD14_PHYS),
.length = CPLD14_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD16_VIRT,
.pfn = __phys_to_pfn(CPLD16_PHYS),
.length = CPLD16_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD18_VIRT,
.pfn = __phys_to_pfn(CPLD18_PHYS),
.length = CPLD18_SIZE,
.type = MT_DEVICE
},
{
.virtual = CPLD1A_VIRT,
.pfn = __phys_to_pfn(CPLD1A_PHYS),
.length = CPLD1A_SIZE,
.type = MT_DEVICE
},
};
void __init
lpd7a40x_map_io(void)
{
iotable_init (lpd7a40x_io_desc, ARRAY_SIZE (lpd7a40x_io_desc));
}
#ifdef CONFIG_MACH_LPD7A400
MACHINE_START (LPD7A400, "Logic Product Development LPD7A400-10")
/* Maintainer: Marc Singer */
.phys_io = 0x80000000,
.io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc,
.boot_params = 0xc0000100,
.map_io = lpd7a40x_map_io,
.init_irq = lh7a400_init_irq,
.timer = &lh7a40x_timer,
.init_machine = lpd7a40x_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_LPD7A404
MACHINE_START (LPD7A404, "Logic Product Development LPD7A404-10")
/* Maintainer: Marc Singer */
.phys_io = 0x80000000,
.io_pg_offst = ((io_p2v (0x80000000))>>18) & 0xfffc,
.boot_params = 0xc0000100,
.map_io = lpd7a40x_map_io,
.init_irq = lh7a404_init_irq,
.timer = &lh7a40x_timer,
.init_machine = lpd7a40x_init,
MACHINE_END
#endif