android_kernel_xiaomi_sm8350/drivers/usb
Dan Williams 019ccc7320 USB: qcaux: driver for auxiliary serial ports on Qualcomm devices
qcaux: add driver for QCDM-capable ports on various devices

Many Qualcomm-based devices provide a CDC-ACM port which accepts
normal AT commands and PPP connections.  But they only provide one
which makes status or signal strength requests impossible while
PPP is active.  They also provide secondary USB interfaces that
talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be
used for status and strength.  Make those QCDM ports accessible.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-02 14:55:19 -08:00
..
atm USB: atm: Use FIELD_SIZEOF, trivial cleanup. 2010-03-02 14:54:22 -08:00
c67x00 USB: c67x00: use resource_size(). 2010-03-02 14:54:01 -08:00
class USB: tty: kill request_room for USB ACM class 2010-03-02 14:55:09 -08:00
core USB: don't read past config->interface[] if usb_control_msg() fails in usb_reset_configuration() 2010-03-02 14:55:10 -08:00
early USB: ehci-dbgp: split PID register updates for IN and OUT pipes 2010-03-02 14:54:58 -08:00
gadget USB: atmel uaba: Adding invert vbus_pin 2010-03-02 14:54:57 -08:00
host USB: fix I2C API usage in ohci-pnx4008. 2010-03-02 14:55:15 -08:00
image USB: BKL removal: mdc800 2010-03-02 14:54:27 -08:00
misc USB: sisusbvga: no unnecessary GFP_ATOMIC 2010-03-02 14:55:14 -08:00
mon USB: usbmon: mask seconds properly in text API 2010-03-02 14:55:14 -08:00
musb USB: musb: test always evaluates to false 2010-03-02 14:54:54 -08:00
otg usb: otg: twl4030: move to request_threaded_irq 2010-03-02 14:53:40 -08:00
serial USB: qcaux: driver for auxiliary serial ports on Qualcomm devices 2010-03-02 14:55:19 -08:00
storage USB: storage: onetouch: unnecessary GFP_ATOMIC 2010-03-02 14:55:13 -08:00
wusbcore USB class: make USB device id constant 2010-03-02 14:54:15 -08:00
Kconfig USB: OHCI: DA8xx/OMAP-L1x glue layer 2010-03-02 14:55:06 -08:00
Makefile USB: MXC: Add i.MX21 specific USB host controller driver. 2010-03-02 14:52:55 -08:00
README
usb-skeleton.c USB: BKL removal: usb-skeleton 2010-03-02 14:54:26 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.