android_kernel_xiaomi_sm8350/drivers/net/pcmcia/com20020_cs.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

510 lines
13 KiB
C

/*
* Linux ARCnet driver - COM20020 PCMCIA support
*
* Written 1994-1999 by Avery Pennarun,
* based on an ISA version by David Woodhouse.
* Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
* which was derived from pcnet_cs.c by David Hinds.
* Some additional portions derived from skeleton.c by Donald Becker.
*
* Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
* for sponsoring the further development of this driver.
*
* **********************
*
* The original copyright of skeleton.c was as follows:
*
* skeleton.c Written 1993 by Donald Becker.
* Copyright 1993 United States Government as represented by the
* Director, National Security Agency. This software may only be used
* and distributed according to the terms of the GNU General Public License as
* modified by SRC, incorporated herein by reference.
*
* **********************
* Changes:
* Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
* - reorganize kmallocs in com20020_attach, checking all for failure
* and releasing the previous allocations if one fails
* **********************
*
* For more details, see drivers/net/arcnet.c
*
* **********************
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/arcdevice.h>
#include <linux/com20020.h>
#include <pcmcia/version.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <asm/io.h>
#include <asm/system.h>
#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
#ifdef PCMCIA_DEBUG
static int pc_debug = PCMCIA_DEBUG;
module_param(pc_debug, int, 0);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static void regdump(struct net_device *dev)
{
int ioaddr = dev->base_addr;
int count;
printk("com20020 register dump:\n");
for (count = ioaddr; count < ioaddr + 16; count++)
{
if (!(count % 16))
printk("\n%04X: ", count);
printk("%02X ", inb(count));
}
printk("\n");
printk("buffer0 dump:\n");
/* set up the address register */
count = 0;
outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
outb(count & 0xff, _ADDR_LO);
for (count = 0; count < 256+32; count++)
{
if (!(count % 16))
printk("\n%04X: ", count);
/* copy the data */
printk("%02X ", inb(_MEMDATA));
}
printk("\n");
}
#else
#define DEBUG(n, args...) do { } while (0)
static inline void regdump(struct net_device *dev) { }
#endif
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
static int node;
static int timeout = 3;
static int backplane;
static int clockp;
static int clockm;
module_param(node, int, 0);
module_param(timeout, int, 0);
module_param(backplane, int, 0);
module_param(clockp, int, 0);
module_param(clockm, int, 0);
MODULE_LICENSE("GPL");
/*====================================================================*/
static void com20020_config(dev_link_t *link);
static void com20020_release(dev_link_t *link);
static int com20020_event(event_t event, int priority,
event_callback_args_t *args);
static dev_info_t dev_info = "com20020_cs";
static dev_link_t *com20020_attach(void);
static void com20020_detach(dev_link_t *);
static dev_link_t *dev_list;
/*====================================================================*/
typedef struct com20020_dev_t {
struct net_device *dev;
dev_node_t node;
} com20020_dev_t;
/*======================================================================
com20020_attach() creates an "instance" of the driver, allocating
local data structures for one device. The device is registered
with Card Services.
======================================================================*/
static dev_link_t *com20020_attach(void)
{
client_reg_t client_reg;
dev_link_t *link;
com20020_dev_t *info;
struct net_device *dev;
int ret;
struct arcnet_local *lp;
DEBUG(0, "com20020_attach()\n");
/* Create new network device */
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link)
return NULL;
info = kmalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
if (!info)
goto fail_alloc_info;
dev = alloc_arcdev("");
if (!dev)
goto fail_alloc_dev;
memset(info, 0, sizeof(struct com20020_dev_t));
memset(link, 0, sizeof(struct dev_link_t));
lp = dev->priv;
lp->timeout = timeout;
lp->backplane = backplane;
lp->clockp = clockp;
lp->clockm = clockm & 3;
lp->hw.owner = THIS_MODULE;
/* fill in our module parameters as defaults */
dev->dev_addr[0] = node;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.NumPorts1 = 16;
link->io.IOAddrLines = 16;
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
link->conf.Present = PRESENT_OPTION;
link->irq.Instance = info->dev = dev;
link->priv = info;
/* Register with Card Services */
link->next = dev_list;
dev_list = link;
client_reg.dev_info = &dev_info;
client_reg.EventMask =
CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
client_reg.event_handler = &com20020_event;
client_reg.Version = 0x0210;
client_reg.event_callback_args.client_data = link;
ret = pcmcia_register_client(&link->handle, &client_reg);
if (ret != 0) {
cs_error(link->handle, RegisterClient, ret);
com20020_detach(link);
return NULL;
}
return link;
fail_alloc_dev:
kfree(info);
fail_alloc_info:
kfree(link);
return NULL;
} /* com20020_attach */
/*======================================================================
This deletes a driver "instance". The device is de-registered
with Card Services. If it has been released, all local data
structures are freed. Otherwise, the structures will be freed
when the device is released.
======================================================================*/
static void com20020_detach(dev_link_t *link)
{
struct com20020_dev_t *info = link->priv;
dev_link_t **linkp;
struct net_device *dev;
DEBUG(1,"detach...\n");
DEBUG(0, "com20020_detach(0x%p)\n", link);
/* Locate device structure */
for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
if (*linkp == link) break;
if (*linkp == NULL)
return;
dev = info->dev;
if (link->dev) {
DEBUG(1,"unregister...\n");
unregister_netdev(dev);
/*
* this is necessary because we register our IRQ separately
* from card services.
*/
if (dev->irq)
free_irq(dev->irq, dev);
}
if (link->state & DEV_CONFIG)
com20020_release(link);
if (link->handle)
pcmcia_deregister_client(link->handle);
/* Unlink device structure, free bits */
DEBUG(1,"unlinking...\n");
*linkp = link->next;
if (link->priv)
{
dev = info->dev;
if (dev)
{
DEBUG(1,"kfree...\n");
free_netdev(dev);
}
DEBUG(1,"kfree2...\n");
kfree(info);
}
DEBUG(1,"kfree3...\n");
kfree(link);
} /* com20020_detach */
/*======================================================================
com20020_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
device available to the system.
======================================================================*/
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static void com20020_config(dev_link_t *link)
{
struct arcnet_local *lp;
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
com20020_dev_t *info;
struct net_device *dev;
int i, last_ret, last_fn;
u_char buf[64];
int ioaddr;
handle = link->handle;
info = link->priv;
dev = info->dev;
DEBUG(1,"config...\n");
DEBUG(0, "com20020_config(0x%p)\n", link);
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_CONFIG;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
link->conf.ConfigBase = parse.config.base;
/* Configure card */
link->state |= DEV_CONFIG;
DEBUG(1,"arcnet: baseport1 is %Xh\n", link->io.BasePort1);
i = !CS_SUCCESS;
if (!link->io.BasePort1)
{
for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
{
link->io.BasePort1 = ioaddr;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
break;
}
}
else
i = pcmcia_request_io(link->handle, &link->io);
if (i != CS_SUCCESS)
{
DEBUG(1,"arcnet: requestIO failed totally!\n");
goto failed;
}
ioaddr = dev->base_addr = link->io.BasePort1;
DEBUG(1,"arcnet: got ioaddr %Xh\n", ioaddr);
DEBUG(1,"arcnet: request IRQ %d (%Xh/%Xh)\n",
link->irq.AssignedIRQ,
link->irq.IRQInfo1, link->irq.IRQInfo2);
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS)
{
DEBUG(1,"arcnet: requestIRQ failed totally!\n");
goto failed;
}
dev->irq = link->irq.AssignedIRQ;
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
if (com20020_check(dev))
{
regdump(dev);
goto failed;
}
lp = dev->priv;
lp->card_name = "PCMCIA COM20020";
lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
SET_NETDEV_DEV(dev, &handle_to_dev(handle));
i = com20020_found(dev, 0); /* calls register_netdev */
if (i != 0) {
DEBUG(1,KERN_NOTICE "com20020_cs: com20020_found() failed\n");
link->dev = NULL;
goto failed;
}
strcpy(info->node.dev_name, dev->name);
DEBUG(1,KERN_INFO "%s: port %#3lx, irq %d\n",
dev->name, dev->base_addr, dev->irq);
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
failed:
DEBUG(1,"com20020_config failed...\n");
com20020_release(link);
} /* com20020_config */
/*======================================================================
After a card is removed, com20020_release() will unregister the net
device, and release the PCMCIA configuration. If the device is
still open, this will be postponed until it is closed.
======================================================================*/
static void com20020_release(dev_link_t *link)
{
DEBUG(1,"release...\n");
DEBUG(0, "com20020_release(0x%p)\n", link);
pcmcia_release_configuration(link->handle);
pcmcia_release_io(link->handle, &link->io);
pcmcia_release_irq(link->handle, &link->irq);
link->state &= ~(DEV_CONFIG | DEV_RELEASE_PENDING);
}
/*======================================================================
The card status event handler. Mostly, this schedules other
stuff to run after an event is received. A CARD_REMOVAL event
also sets some flags to discourage the net drivers from trying
to talk to the card any more.
======================================================================*/
static int com20020_event(event_t event, int priority,
event_callback_args_t *args)
{
dev_link_t *link = args->client_data;
com20020_dev_t *info = link->priv;
struct net_device *dev = info->dev;
DEBUG(1, "com20020_event(0x%06x)\n", event);
switch (event) {
case CS_EVENT_CARD_REMOVAL:
link->state &= ~DEV_PRESENT;
if (link->state & DEV_CONFIG)
netif_device_detach(dev);
break;
case CS_EVENT_CARD_INSERTION:
link->state |= DEV_PRESENT;
com20020_config(link);
break;
case CS_EVENT_PM_SUSPEND:
link->state |= DEV_SUSPEND;
/* Fall through... */
case CS_EVENT_RESET_PHYSICAL:
if (link->state & DEV_CONFIG) {
if (link->open) {
netif_device_detach(dev);
}
pcmcia_release_configuration(link->handle);
}
break;
case CS_EVENT_PM_RESUME:
link->state &= ~DEV_SUSPEND;
/* Fall through... */
case CS_EVENT_CARD_RESET:
if (link->state & DEV_CONFIG) {
pcmcia_request_configuration(link->handle, &link->conf);
if (link->open) {
int ioaddr = dev->base_addr;
struct arcnet_local *lp = dev->priv;
ARCRESET;
}
}
break;
}
return 0;
} /* com20020_event */
static struct pcmcia_driver com20020_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "com20020_cs",
},
.attach = com20020_attach,
.detach = com20020_detach,
};
static int __init init_com20020_cs(void)
{
return pcmcia_register_driver(&com20020_cs_driver);
}
static void __exit exit_com20020_cs(void)
{
pcmcia_unregister_driver(&com20020_cs_driver);
BUG_ON(dev_list != NULL);
}
module_init(init_com20020_cs);
module_exit(exit_com20020_cs);