android_kernel_xiaomi_sm8350/arch/i386/pci/mmconfig.c
Chuck Ebbert ead2bfeb7f [PATCH] PCI: fix issues with extended conf space when MMCONFIG disabled because of e820
On 15 Jun 2006 03:45:10 +0200, Andi Kleen wrote:

> Anyways I would say that if the BIOS can't get MCFG right then
> it's likely not been validated on that board and shouldn't be used.

According to Petr Vandrovec:

 ... "What is important (and checked) is address of MMCONFIG reported by MCFG
 table...  Unfortunately code does not bother with printing that address :-(

 "Another problem is that code has hardcoded that MMCONFIG area is 256MB large.
 Unfortunately for the code PCI specification allows any power of two between 2MB
 and 256MB if vendor knows that such amount of busses (from 2 to 128) will be
 sufficient for system.  With notebook it is quite possible that not full 8 bits
 are implemented for MMCONFIG bus number."

So here is a patch.  Unfortunately my system still fails the test because
it doesn't reserve any part of the MMCONFIG area, but this may fix others.

Booted on x86_64, only compiled on i386.  x86_64 still remaps the max area
(256MB) even though only 2MB is checked... but 2.6.16 had no check at all
so it is still better.

PCI: reduce size of x86 MMCONFIG reserved area check

1.  Print the address of the MMCONFIG area when the test for that area
    being reserved fails.

2.  Only check if the first 2MB is reserved, as that is the minimum.

Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21 12:00:01 -07:00

216 lines
5.2 KiB
C

/*
* Copyright (C) 2004 Matthew Wilcox <matthew@wil.cx>
* Copyright (C) 2004 Intel Corp.
*
* This code is released under the GNU General Public License version 2.
*/
/*
* mmconfig.c - Low-level direct PCI config space access via MMCONFIG
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <asm/e820.h>
#include "pci.h"
/* aperture is up to 256MB but BIOS may reserve less */
#define MMCONFIG_APER_MIN (2 * 1024*1024)
#define MMCONFIG_APER_MAX (256 * 1024*1024)
/* Assume systems with more busses have correct MCFG */
#define MAX_CHECK_BUS 16
#define mmcfg_virt_addr ((void __iomem *) fix_to_virt(FIX_PCIE_MCFG))
/* The base address of the last MMCONFIG device accessed */
static u32 mmcfg_last_accessed_device;
static DECLARE_BITMAP(fallback_slots, MAX_CHECK_BUS*32);
/*
* Functions for accessing PCI configuration space with MMCONFIG accesses
*/
static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
{
int cfg_num = -1;
struct acpi_table_mcfg_config *cfg;
if (seg == 0 && bus < MAX_CHECK_BUS &&
test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots))
return 0;
while (1) {
++cfg_num;
if (cfg_num >= pci_mmcfg_config_num) {
break;
}
cfg = &pci_mmcfg_config[cfg_num];
if (cfg->pci_segment_group_number != seg)
continue;
if ((cfg->start_bus_number <= bus) &&
(cfg->end_bus_number >= bus))
return cfg->base_address;
}
/* Handle more broken MCFG tables on Asus etc.
They only contain a single entry for bus 0-0. Assume
this applies to all busses. */
cfg = &pci_mmcfg_config[0];
if (pci_mmcfg_config_num == 1 &&
cfg->pci_segment_group_number == 0 &&
(cfg->start_bus_number | cfg->end_bus_number) == 0)
return cfg->base_address;
/* Fall back to type 0 */
return 0;
}
static inline void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
{
u32 dev_base = base | (bus << 20) | (devfn << 12);
if (dev_base != mmcfg_last_accessed_device) {
mmcfg_last_accessed_device = dev_base;
set_fixmap_nocache(FIX_PCIE_MCFG, dev_base);
}
}
static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
u32 base;
if ((bus > 255) || (devfn > 255) || (reg > 4095)) {
*value = -1;
return -EINVAL;
}
base = get_base_addr(seg, bus, devfn);
if (!base)
return pci_conf1_read(seg,bus,devfn,reg,len,value);
spin_lock_irqsave(&pci_config_lock, flags);
pci_exp_set_dev_base(base, bus, devfn);
switch (len) {
case 1:
*value = readb(mmcfg_virt_addr + reg);
break;
case 2:
*value = readw(mmcfg_virt_addr + reg);
break;
case 4:
*value = readl(mmcfg_virt_addr + reg);
break;
}
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
unsigned long flags;
u32 base;
if ((bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
base = get_base_addr(seg, bus, devfn);
if (!base)
return pci_conf1_write(seg,bus,devfn,reg,len,value);
spin_lock_irqsave(&pci_config_lock, flags);
pci_exp_set_dev_base(base, bus, devfn);
switch (len) {
case 1:
writeb(value, mmcfg_virt_addr + reg);
break;
case 2:
writew(value, mmcfg_virt_addr + reg);
break;
case 4:
writel(value, mmcfg_virt_addr + reg);
break;
}
spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
static struct pci_raw_ops pci_mmcfg = {
.read = pci_mmcfg_read,
.write = pci_mmcfg_write,
};
/* K8 systems have some devices (typically in the builtin northbridge)
that are only accessible using type1
Normally this can be expressed in the MCFG by not listing them
and assigning suitable _SEGs, but this isn't implemented in some BIOS.
Instead try to discover all devices on bus 0 that are unreachable using MM
and fallback for them. */
static __init void unreachable_devices(void)
{
int i, k;
unsigned long flags;
for (k = 0; k < MAX_CHECK_BUS; k++) {
for (i = 0; i < 32; i++) {
u32 val1;
u32 addr;
pci_conf1_read(0, k, PCI_DEVFN(i, 0), 0, 4, &val1);
if (val1 == 0xffffffff)
continue;
/* Locking probably not needed, but safer */
spin_lock_irqsave(&pci_config_lock, flags);
addr = get_base_addr(0, k, PCI_DEVFN(i, 0));
if (addr != 0)
pci_exp_set_dev_base(addr, k, PCI_DEVFN(i, 0));
if (addr == 0 ||
readl((u32 __iomem *)mmcfg_virt_addr) != val1) {
set_bit(i, fallback_slots);
printk(KERN_NOTICE
"PCI: No mmconfig possible on %x:%x\n", k, i);
}
spin_unlock_irqrestore(&pci_config_lock, flags);
}
}
}
void __init pci_mmcfg_init(void)
{
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
(pci_mmcfg_config[0].base_address == 0))
return;
if (!e820_all_mapped(pci_mmcfg_config[0].base_address,
pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
pci_mmcfg_config[0].base_address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
printk(KERN_INFO "PCI: Using MMCONFIG\n");
raw_pci_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
unreachable_devices();
}