android_kernel_xiaomi_sm8350/drivers/net/wireless/ath9k/rc.h
Sujith 86b89eed9a ath9k: Revamp wireless mode usage
Use a single enum for managing modes, store supported modes by
the HW in a bitmask.
Register legacy rates with mac80211 only at init.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-07 09:49:44 -04:00

317 lines
11 KiB
C

/*
* Copyright (c) 2004 Sam Leffler, Errno Consulting
* Copyright (c) 2004 Video54 Technologies, Inc.
* Copyright (c) 2008 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef RC_H
#define RC_H
#include "ath9k.h"
/*
* Interface definitions for transmit rate control modules for the
* Atheros driver.
*
* A rate control module is responsible for choosing the transmit rate
* for each data frame. Management+control frames are always sent at
* a fixed rate.
*
* Only one module may be present at a time; the driver references
* rate control interfaces by symbol name. If multiple modules are
* to be supported we'll need to switch to a registration-based scheme
* as is currently done, for example, for authentication modules.
*
* An instance of the rate control module is attached to each device
* at attach time and detached when the device is destroyed. The module
* may associate data with each device and each node (station). Both
* sets of storage are opaque except for the size of the per-node storage
* which must be provided when the module is attached.
*
* The rate control module is notified for each state transition and
* station association/reassociation. Otherwise it is queried for a
* rate for each outgoing frame and provided status from each transmitted
* frame. Any ancillary processing is the responsibility of the module
* (e.g. if periodic processing is required then the module should setup
* it's own timer).
*
* In addition to the transmit rate for each frame the module must also
* indicate the number of attempts to make at the specified rate. If this
* number is != ATH_TXMAXTRY then an additional callback is made to setup
* additional transmit state. The rate control code is assumed to write
* this additional data directly to the transmit descriptor.
*/
struct ath_softc;
#define TRUE 1
#define FALSE 0
#define ATH_RATE_MAX 30
#define MCS_SET_SIZE 128
enum ieee80211_fixed_rate_mode {
IEEE80211_FIXED_RATE_NONE = 0,
IEEE80211_FIXED_RATE_MCS = 1 /* HT rates */
};
/*
* Use the hal os glue code to get ms time
*/
#define IEEE80211_RATE_IDX_ENTRY(val, idx) (((val&(0xff<<(idx*8)))>>(idx*8)))
#define SHORT_PRE 1
#define LONG_PRE 0
#define WLAN_PHY_HT_20_SS WLAN_RC_PHY_HT_20_SS
#define WLAN_PHY_HT_20_DS WLAN_RC_PHY_HT_20_DS
#define WLAN_PHY_HT_20_DS_HGI WLAN_RC_PHY_HT_20_DS_HGI
#define WLAN_PHY_HT_40_SS WLAN_RC_PHY_HT_40_SS
#define WLAN_PHY_HT_40_SS_HGI WLAN_RC_PHY_HT_40_SS_HGI
#define WLAN_PHY_HT_40_DS WLAN_RC_PHY_HT_40_DS
#define WLAN_PHY_HT_40_DS_HGI WLAN_RC_PHY_HT_40_DS_HGI
#define WLAN_PHY_OFDM PHY_OFDM
#define WLAN_PHY_CCK PHY_CCK
#define TRUE_20 0x2
#define TRUE_40 0x4
#define TRUE_2040 (TRUE_20|TRUE_40)
#define TRUE_ALL (TRUE_2040|TRUE)
enum {
WLAN_RC_PHY_HT_20_SS = 4,
WLAN_RC_PHY_HT_20_DS,
WLAN_RC_PHY_HT_40_SS,
WLAN_RC_PHY_HT_40_DS,
WLAN_RC_PHY_HT_20_SS_HGI,
WLAN_RC_PHY_HT_20_DS_HGI,
WLAN_RC_PHY_HT_40_SS_HGI,
WLAN_RC_PHY_HT_40_DS_HGI,
WLAN_RC_PHY_MAX
};
#define WLAN_RC_PHY_DS(_phy) ((_phy == WLAN_RC_PHY_HT_20_DS) \
|| (_phy == WLAN_RC_PHY_HT_40_DS) \
|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
#define WLAN_RC_PHY_40(_phy) ((_phy == WLAN_RC_PHY_HT_40_SS) \
|| (_phy == WLAN_RC_PHY_HT_40_DS) \
|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
#define WLAN_RC_PHY_SGI(_phy) ((_phy == WLAN_RC_PHY_HT_20_SS_HGI) \
|| (_phy == WLAN_RC_PHY_HT_20_DS_HGI) \
|| (_phy == WLAN_RC_PHY_HT_40_SS_HGI) \
|| (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
#define WLAN_RC_PHY_HT(_phy) (_phy >= WLAN_RC_PHY_HT_20_SS)
/* Returns the capflag mode */
#define WLAN_RC_CAP_MODE(capflag) (((capflag & WLAN_RC_HT_FLAG) ? \
(capflag & WLAN_RC_40_FLAG) ? TRUE_40 : TRUE_20 : TRUE))
/* Return TRUE if flag supports HT20 && client supports HT20 or
* return TRUE if flag supports HT40 && client supports HT40.
* This is used becos some rates overlap between HT20/HT40.
*/
#define WLAN_RC_PHY_HT_VALID(flag, capflag) (((flag & TRUE_20) && !(capflag \
& WLAN_RC_40_FLAG)) || ((flag & TRUE_40) && \
(capflag & WLAN_RC_40_FLAG)))
#define WLAN_RC_DS_FLAG (0x01)
#define WLAN_RC_40_FLAG (0x02)
#define WLAN_RC_SGI_FLAG (0x04)
#define WLAN_RC_HT_FLAG (0x08)
/* Index into the rate table */
#define INIT_RATE_MAX_20 23
#define INIT_RATE_MAX_40 40
#define RATE_TABLE_SIZE 64
/* XXX: Convert to kdoc */
struct ath_rate_table {
int rate_cnt;
struct {
int valid; /* Valid for use in rate control */
int valid_single_stream;/* Valid for use in rate control
for single stream operation */
u8 phy; /* CCK/OFDM/TURBO/XR */
u32 ratekbps; /* Rate in Kbits per second */
u32 user_ratekbps; /* User rate in KBits per second */
u8 ratecode; /* rate that goes into
hw descriptors */
u8 short_preamble; /* Mask for enabling short preamble
in rate code for CCK */
u8 dot11rate; /* Value that goes into supported
rates info element of MLME */
u8 ctrl_rate; /* Index of next lower basic rate,
used for duration computation */
int8_t rssi_ack_validmin; /* Rate control related */
int8_t rssi_ack_deltamin; /* Rate control related */
u8 base_index; /* base rate index */
u8 cw40index; /* 40cap rate index */
u8 sgi_index; /* shortgi rate index */
u8 ht_index; /* shortgi rate index */
u32 max_4ms_framelen; /* Maximum frame length(bytes)
for 4ms tx duration */
} info[RATE_TABLE_SIZE];
u32 probe_interval; /* interval for ratectrl to
probe for other rates */
u32 rssi_reduce_interval; /* interval for ratectrl
to reduce RSSI */
u8 initial_ratemax; /* the initial ratemax value used
in ath_rc_sib_update() */
};
#define ATH_RC_PROBE_ALLOWED 0x00000001
#define ATH_RC_MINRATE_LASTRATE 0x00000002
#define ATH_RC_SHORT_PREAMBLE 0x00000004
struct ath_rc_series {
u8 rix;
u8 tries;
u8 flags;
u32 max_4ms_framelen;
};
/* rcs_flags definition */
#define ATH_RC_DS_FLAG 0x01
#define ATH_RC_CW40_FLAG 0x02 /* CW 40 */
#define ATH_RC_SGI_FLAG 0x04 /* Short Guard Interval */
#define ATH_RC_HT_FLAG 0x08 /* HT */
#define ATH_RC_RTSCTS_FLAG 0x10 /* RTS-CTS */
/*
* State structures for new rate adaptation code
*/
#define MAX_TX_RATE_TBL 64
#define MAX_TX_RATE_PHY 48
struct ath_tx_ratectrl_state {
int8_t rssi_thres; /* required rssi for this rate (dB) */
u8 per; /* recent estimate of packet error rate (%) */
};
struct ath_tx_ratectrl {
struct ath_tx_ratectrl_state state[MAX_TX_RATE_TBL]; /* state */
int8_t rssi_last; /* last ack rssi */
int8_t rssi_last_lookup; /* last ack rssi used for lookup */
int8_t rssi_last_prev; /* previous last ack rssi */
int8_t rssi_last_prev2; /* 2nd previous last ack rssi */
int32_t rssi_sum_cnt; /* count of rssi_sum for averaging */
int32_t rssi_sum_rate; /* rate that we are averaging */
int32_t rssi_sum; /* running sum of rssi for averaging */
u32 valid_txrate_mask; /* mask of valid rates */
u8 rate_table_size; /* rate table size */
u8 rate_max; /* max rate that has recently worked */
u8 probe_rate; /* rate we are probing at */
u32 rssi_time; /* msec timestamp for last ack rssi */
u32 rssi_down_time; /* msec timestamp for last down step */
u32 probe_time; /* msec timestamp for last probe */
u8 hw_maxretry_pktcnt; /* num packets since we got
HW max retry error */
u8 max_valid_rate; /* maximum number of valid rate */
u8 valid_rate_index[MAX_TX_RATE_TBL]; /* valid rate index */
u32 per_down_time; /* msec timstamp for last
PER down step */
/* 11n state */
u8 valid_phy_ratecnt[WLAN_RC_PHY_MAX]; /* valid rate count */
u8 valid_phy_rateidx[WLAN_RC_PHY_MAX][MAX_TX_RATE_TBL];
u8 rc_phy_mode;
u8 rate_max_phy; /* Phy index for the max rate */
u32 rate_max_lastused; /* msec timstamp of when we
last used rateMaxPhy */
u32 probe_interval; /* interval for ratectrl to probe
for other rates */
};
struct ath_rateset {
u8 rs_nrates;
u8 rs_rates[ATH_RATE_MAX];
};
/* per-device state */
struct ath_rate_softc {
/* phy tables that contain rate control data */
const void *hw_rate_table[ATH9K_MODE_MAX];
int fixedrix; /* -1 or index of fixed rate */
};
/* per-node state */
struct ath_rate_node {
struct ath_tx_ratectrl tx_ratectrl; /* rate control state proper */
u32 prev_data_rix; /* rate idx of last data frame */
/* map of rate ix -> negotiated rate set ix */
u8 rixmap[MAX_TX_RATE_TBL];
/* map of ht rate ix -> negotiated rate set ix */
u8 ht_rixmap[MAX_TX_RATE_TBL];
u8 ht_cap; /* ht capabilities */
u8 ant_tx; /* current transmit antenna */
u8 single_stream; /* When TRUE, only single
stream Tx possible */
struct ath_rateset neg_rates; /* Negotiated rates */
struct ath_rateset neg_ht_rates; /* Negotiated HT rates */
struct ath_rate_softc *asc; /* back pointer to atheros softc */
struct ath_vap *avp; /* back pointer to vap */
};
/* Driver data of ieee80211_tx_info */
struct ath_tx_info_priv {
struct ath_rc_series rcs[4];
struct ath_tx_status tx;
int n_frames;
int n_bad_frames;
u8 min_rate;
};
/*
* Attach/detach a rate control module.
*/
struct ath_rate_softc *ath_rate_attach(struct ath_hal *ah);
void ath_rate_detach(struct ath_rate_softc *asc);
/*
* Update/reset rate control state for 802.11 state transitions.
* Important mostly as the analog to ath_rate_newassoc when operating
* in station mode.
*/
void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv);
void ath_rate_newstate(struct ath_softc *sc, struct ath_vap *avp);
/*
* Return the tx rate series.
*/
void ath_rate_findrate(struct ath_softc *sc, struct ath_rate_node *ath_rc_priv,
int num_tries, int num_rates,
unsigned int rcflag, struct ath_rc_series[],
int *is_probe, int isretry);
/*
* Return rate index for given Dot11 Rate.
*/
u8 ath_rate_findrateix(struct ath_softc *sc,
u8 dot11_rate);
/* Routines to register/unregister rate control algorithm */
int ath_rate_control_register(void);
void ath_rate_control_unregister(void);
#endif /* RC_H */