android_kernel_xiaomi_sm8350/drivers/xen/manage.c
Stephen Rothwell 55ca089e25 linux-next: pci tree build failure
Today's linux-next build (x86_64 allmodconfig) failed like this:

 drivers/xen/manage.c: In function 'xen_suspend':
 drivers/xen/manage.c:66: error: too few arguments to function 'device_power_up'
 drivers/xen/manage.c: In function 'do_suspend':
 drivers/xen/manage.c:117: error: too few arguments to function 'device_resume'

Caused by commit 1eede070a5 ("Introduce new
top level suspend and hibernation callbacks") interacting with new
usages ...

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-18 09:51:02 +02:00

255 lines
5.3 KiB
C

/*
* Handle extern requests for shutdown, reboot and sysrq
*/
#include <linux/kernel.h>
#include <linux/err.h>
#include <linux/reboot.h>
#include <linux/sysrq.h>
#include <linux/stop_machine.h>
#include <linux/freezer.h>
#include <xen/xenbus.h>
#include <xen/grant_table.h>
#include <xen/events.h>
#include <xen/hvc-console.h>
#include <xen/xen-ops.h>
#include <asm/xen/hypercall.h>
#include <asm/xen/page.h>
enum shutdown_state {
SHUTDOWN_INVALID = -1,
SHUTDOWN_POWEROFF = 0,
SHUTDOWN_SUSPEND = 2,
/* Code 3 is SHUTDOWN_CRASH, which we don't use because the domain can only
report a crash, not be instructed to crash!
HALT is the same as POWEROFF, as far as we're concerned. The tools use
the distinction when we return the reason code to them. */
SHUTDOWN_HALT = 4,
};
/* Ignore multiple shutdown requests. */
static enum shutdown_state shutting_down = SHUTDOWN_INVALID;
#ifdef CONFIG_PM_SLEEP
static int xen_suspend(void *data)
{
int *cancelled = data;
int err;
BUG_ON(!irqs_disabled());
load_cr3(swapper_pg_dir);
err = device_power_down(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen_suspend: device_power_down failed: %d\n",
err);
return err;
}
xen_mm_pin_all();
gnttab_suspend();
xen_pre_suspend();
/*
* This hypercall returns 1 if suspend was cancelled
* or the domain was merely checkpointed, and 0 if it
* is resuming in a new domain.
*/
*cancelled = HYPERVISOR_suspend(virt_to_mfn(xen_start_info));
xen_post_suspend(*cancelled);
gnttab_resume();
xen_mm_unpin_all();
device_power_up(PMSG_RESUME);
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
return 0;
}
static void do_suspend(void)
{
int err;
int cancelled = 1;
shutting_down = SHUTDOWN_SUSPEND;
#ifdef CONFIG_PREEMPT
/* If the kernel is preemptible, we need to freeze all the processes
to prevent them from being in the middle of a pagetable update
during suspend. */
err = freeze_processes();
if (err) {
printk(KERN_ERR "xen suspend: freeze failed %d\n", err);
return;
}
#endif
err = device_suspend(PMSG_SUSPEND);
if (err) {
printk(KERN_ERR "xen suspend: device_suspend %d\n", err);
goto out;
}
printk("suspending xenbus...\n");
/* XXX use normal device tree? */
xenbus_suspend();
err = stop_machine_run(xen_suspend, &cancelled, 0);
if (err) {
printk(KERN_ERR "failed to start xen_suspend: %d\n", err);
goto out;
}
if (!cancelled) {
xen_arch_resume();
xenbus_resume();
} else
xenbus_suspend_cancel();
device_resume(PMSG_RESUME);
/* Make sure timer events get retriggered on all CPUs */
clock_was_set();
out:
#ifdef CONFIG_PREEMPT
thaw_processes();
#endif
shutting_down = SHUTDOWN_INVALID;
}
#endif /* CONFIG_PM_SLEEP */
static void shutdown_handler(struct xenbus_watch *watch,
const char **vec, unsigned int len)
{
char *str;
struct xenbus_transaction xbt;
int err;
if (shutting_down != SHUTDOWN_INVALID)
return;
again:
err = xenbus_transaction_start(&xbt);
if (err)
return;
str = (char *)xenbus_read(xbt, "control", "shutdown", NULL);
/* Ignore read errors and empty reads. */
if (XENBUS_IS_ERR_READ(str)) {
xenbus_transaction_end(xbt, 1);
return;
}
xenbus_write(xbt, "control", "shutdown", "");
err = xenbus_transaction_end(xbt, 0);
if (err == -EAGAIN) {
kfree(str);
goto again;
}
if (strcmp(str, "poweroff") == 0 ||
strcmp(str, "halt") == 0) {
shutting_down = SHUTDOWN_POWEROFF;
orderly_poweroff(false);
} else if (strcmp(str, "reboot") == 0) {
shutting_down = SHUTDOWN_POWEROFF; /* ? */
ctrl_alt_del();
#ifdef CONFIG_PM_SLEEP
} else if (strcmp(str, "suspend") == 0) {
do_suspend();
#endif
} else {
printk(KERN_INFO "Ignoring shutdown request: %s\n", str);
shutting_down = SHUTDOWN_INVALID;
}
kfree(str);
}
static void sysrq_handler(struct xenbus_watch *watch, const char **vec,
unsigned int len)
{
char sysrq_key = '\0';
struct xenbus_transaction xbt;
int err;
again:
err = xenbus_transaction_start(&xbt);
if (err)
return;
if (!xenbus_scanf(xbt, "control", "sysrq", "%c", &sysrq_key)) {
printk(KERN_ERR "Unable to read sysrq code in "
"control/sysrq\n");
xenbus_transaction_end(xbt, 1);
return;
}
if (sysrq_key != '\0')
xenbus_printf(xbt, "control", "sysrq", "%c", '\0');
err = xenbus_transaction_end(xbt, 0);
if (err == -EAGAIN)
goto again;
if (sysrq_key != '\0')
handle_sysrq(sysrq_key, NULL);
}
static struct xenbus_watch shutdown_watch = {
.node = "control/shutdown",
.callback = shutdown_handler
};
static struct xenbus_watch sysrq_watch = {
.node = "control/sysrq",
.callback = sysrq_handler
};
static int setup_shutdown_watcher(void)
{
int err;
err = register_xenbus_watch(&shutdown_watch);
if (err) {
printk(KERN_ERR "Failed to set shutdown watcher\n");
return err;
}
err = register_xenbus_watch(&sysrq_watch);
if (err) {
printk(KERN_ERR "Failed to set sysrq watcher\n");
return err;
}
return 0;
}
static int shutdown_event(struct notifier_block *notifier,
unsigned long event,
void *data)
{
setup_shutdown_watcher();
return NOTIFY_DONE;
}
static int __init setup_shutdown_event(void)
{
static struct notifier_block xenstore_notifier = {
.notifier_call = shutdown_event
};
register_xenstore_notifier(&xenstore_notifier);
return 0;
}
subsys_initcall(setup_shutdown_event);