0542925b25
Convert to new probing mechanism and add hotplug support by enabling PORT_IRQ_PHYRDY_CHG, marking ehi for hotplug and scheduling EH on PORT_IRQ_PHYRDY_CHG or PORT_IRQ_DEV_XCHG. Sil3124/32 family of controllers don't have any mechanism to wait for the first D2H FIS after hotplug, so ATA_FLAG_SKIP_D2H_BSY is used. Signed-off-by: Tejun Heo <htejun@gmail.com>
1182 lines
32 KiB
C
1182 lines
32 KiB
C
/*
|
|
* sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers
|
|
*
|
|
* Copyright 2005 Tejun Heo
|
|
*
|
|
* Based on preview driver from Silicon Image.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include <asm/io.h>
|
|
|
|
#define DRV_NAME "sata_sil24"
|
|
#define DRV_VERSION "0.24"
|
|
|
|
/*
|
|
* Port request block (PRB) 32 bytes
|
|
*/
|
|
struct sil24_prb {
|
|
u16 ctrl;
|
|
u16 prot;
|
|
u32 rx_cnt;
|
|
u8 fis[6 * 4];
|
|
};
|
|
|
|
/*
|
|
* Scatter gather entry (SGE) 16 bytes
|
|
*/
|
|
struct sil24_sge {
|
|
u64 addr;
|
|
u32 cnt;
|
|
u32 flags;
|
|
};
|
|
|
|
/*
|
|
* Port multiplier
|
|
*/
|
|
struct sil24_port_multiplier {
|
|
u32 diag;
|
|
u32 sactive;
|
|
};
|
|
|
|
enum {
|
|
/*
|
|
* Global controller registers (128 bytes @ BAR0)
|
|
*/
|
|
/* 32 bit regs */
|
|
HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */
|
|
HOST_CTRL = 0x40,
|
|
HOST_IRQ_STAT = 0x44,
|
|
HOST_PHY_CFG = 0x48,
|
|
HOST_BIST_CTRL = 0x50,
|
|
HOST_BIST_PTRN = 0x54,
|
|
HOST_BIST_STAT = 0x58,
|
|
HOST_MEM_BIST_STAT = 0x5c,
|
|
HOST_FLASH_CMD = 0x70,
|
|
/* 8 bit regs */
|
|
HOST_FLASH_DATA = 0x74,
|
|
HOST_TRANSITION_DETECT = 0x75,
|
|
HOST_GPIO_CTRL = 0x76,
|
|
HOST_I2C_ADDR = 0x78, /* 32 bit */
|
|
HOST_I2C_DATA = 0x7c,
|
|
HOST_I2C_XFER_CNT = 0x7e,
|
|
HOST_I2C_CTRL = 0x7f,
|
|
|
|
/* HOST_SLOT_STAT bits */
|
|
HOST_SSTAT_ATTN = (1 << 31),
|
|
|
|
/* HOST_CTRL bits */
|
|
HOST_CTRL_M66EN = (1 << 16), /* M66EN PCI bus signal */
|
|
HOST_CTRL_TRDY = (1 << 17), /* latched PCI TRDY */
|
|
HOST_CTRL_STOP = (1 << 18), /* latched PCI STOP */
|
|
HOST_CTRL_DEVSEL = (1 << 19), /* latched PCI DEVSEL */
|
|
HOST_CTRL_REQ64 = (1 << 20), /* latched PCI REQ64 */
|
|
|
|
/*
|
|
* Port registers
|
|
* (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2)
|
|
*/
|
|
PORT_REGS_SIZE = 0x2000,
|
|
|
|
PORT_LRAM = 0x0000, /* 31 LRAM slots and PM regs */
|
|
PORT_LRAM_SLOT_SZ = 0x0080, /* 32 bytes PRB + 2 SGE, ACT... */
|
|
|
|
PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */
|
|
/* 32 bit regs */
|
|
PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */
|
|
PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */
|
|
PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */
|
|
PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */
|
|
PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */
|
|
PORT_ACTIVATE_UPPER_ADDR= 0x101c,
|
|
PORT_EXEC_FIFO = 0x1020, /* command execution fifo */
|
|
PORT_CMD_ERR = 0x1024, /* command error number */
|
|
PORT_FIS_CFG = 0x1028,
|
|
PORT_FIFO_THRES = 0x102c,
|
|
/* 16 bit regs */
|
|
PORT_DECODE_ERR_CNT = 0x1040,
|
|
PORT_DECODE_ERR_THRESH = 0x1042,
|
|
PORT_CRC_ERR_CNT = 0x1044,
|
|
PORT_CRC_ERR_THRESH = 0x1046,
|
|
PORT_HSHK_ERR_CNT = 0x1048,
|
|
PORT_HSHK_ERR_THRESH = 0x104a,
|
|
/* 32 bit regs */
|
|
PORT_PHY_CFG = 0x1050,
|
|
PORT_SLOT_STAT = 0x1800,
|
|
PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */
|
|
PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */
|
|
PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */
|
|
PORT_SCONTROL = 0x1f00,
|
|
PORT_SSTATUS = 0x1f04,
|
|
PORT_SERROR = 0x1f08,
|
|
PORT_SACTIVE = 0x1f0c,
|
|
|
|
/* PORT_CTRL_STAT bits */
|
|
PORT_CS_PORT_RST = (1 << 0), /* port reset */
|
|
PORT_CS_DEV_RST = (1 << 1), /* device reset */
|
|
PORT_CS_INIT = (1 << 2), /* port initialize */
|
|
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
|
|
PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
|
|
PORT_CS_RESUME = (1 << 6), /* port resume */
|
|
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
|
|
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
|
|
PORT_CS_RDY = (1 << 31), /* port ready to accept commands */
|
|
|
|
/* PORT_IRQ_STAT/ENABLE_SET/CLR */
|
|
/* bits[11:0] are masked */
|
|
PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */
|
|
PORT_IRQ_ERROR = (1 << 1), /* command execution error */
|
|
PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */
|
|
PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */
|
|
PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */
|
|
PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */
|
|
PORT_IRQ_UNK_FIS = (1 << 6), /* unknown FIS received */
|
|
PORT_IRQ_DEV_XCHG = (1 << 7), /* device exchanged */
|
|
PORT_IRQ_8B10B = (1 << 8), /* 8b/10b decode error threshold */
|
|
PORT_IRQ_CRC = (1 << 9), /* CRC error threshold */
|
|
PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
|
|
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
|
|
|
|
DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
|
|
PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
|
|
PORT_IRQ_UNK_FIS,
|
|
|
|
/* bits[27:16] are unmasked (raw) */
|
|
PORT_IRQ_RAW_SHIFT = 16,
|
|
PORT_IRQ_MASKED_MASK = 0x7ff,
|
|
PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT),
|
|
|
|
/* ENABLE_SET/CLR specific, intr steering - 2 bit field */
|
|
PORT_IRQ_STEER_SHIFT = 30,
|
|
PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT),
|
|
|
|
/* PORT_CMD_ERR constants */
|
|
PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */
|
|
PORT_CERR_SDB = 2, /* Error bit in SDB FIS */
|
|
PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */
|
|
PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */
|
|
PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */
|
|
PORT_CERR_DIRECTION = 6, /* Data direction mismatch */
|
|
PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */
|
|
PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */
|
|
PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */
|
|
PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */
|
|
PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */
|
|
PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */
|
|
PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */
|
|
PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */
|
|
PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */
|
|
PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */
|
|
PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */
|
|
PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */
|
|
PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */
|
|
PORT_CERR_XFR_MSTABRT = 34, /* PSD ecode 10 - master abort */
|
|
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
|
|
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
|
|
|
|
/* bits of PRB control field */
|
|
PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
|
|
PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
|
|
PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
|
|
PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
|
|
PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
|
|
|
|
/* PRB protocol field */
|
|
PRB_PROT_PACKET = (1 << 0),
|
|
PRB_PROT_TCQ = (1 << 1),
|
|
PRB_PROT_NCQ = (1 << 2),
|
|
PRB_PROT_READ = (1 << 3),
|
|
PRB_PROT_WRITE = (1 << 4),
|
|
PRB_PROT_TRANSPARENT = (1 << 5),
|
|
|
|
/*
|
|
* Other constants
|
|
*/
|
|
SGE_TRM = (1 << 31), /* Last SGE in chain */
|
|
SGE_LNK = (1 << 30), /* linked list
|
|
Points to SGT, not SGE */
|
|
SGE_DRD = (1 << 29), /* discard data read (/dev/null)
|
|
data address ignored */
|
|
|
|
SIL24_MAX_CMDS = 31,
|
|
|
|
/* board id */
|
|
BID_SIL3124 = 0,
|
|
BID_SIL3132 = 1,
|
|
BID_SIL3131 = 2,
|
|
|
|
/* host flags */
|
|
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
|
|
ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
|
|
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
|
|
|
|
IRQ_STAT_4PORTS = 0xf,
|
|
};
|
|
|
|
struct sil24_ata_block {
|
|
struct sil24_prb prb;
|
|
struct sil24_sge sge[LIBATA_MAX_PRD];
|
|
};
|
|
|
|
struct sil24_atapi_block {
|
|
struct sil24_prb prb;
|
|
u8 cdb[16];
|
|
struct sil24_sge sge[LIBATA_MAX_PRD - 1];
|
|
};
|
|
|
|
union sil24_cmd_block {
|
|
struct sil24_ata_block ata;
|
|
struct sil24_atapi_block atapi;
|
|
};
|
|
|
|
static struct sil24_cerr_info {
|
|
unsigned int err_mask, action;
|
|
const char *desc;
|
|
} sil24_cerr_db[] = {
|
|
[0] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
|
|
"device error" },
|
|
[PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
|
|
"device error via D2H FIS" },
|
|
[PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
|
|
"device error via SDB FIS" },
|
|
[PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
|
|
"error in data FIS" },
|
|
[PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
|
|
"failed to transmit command FIS" },
|
|
[PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"protocol mismatch" },
|
|
[PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"data directon mismatch" },
|
|
[PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"ran out of SGEs while writing" },
|
|
[PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"ran out of SGEs while reading" },
|
|
[PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"invalid data directon for ATAPI CDB" },
|
|
[PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
|
|
"SGT no on qword boundary" },
|
|
[PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI target abort while fetching SGT" },
|
|
[PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI master abort while fetching SGT" },
|
|
[PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI parity error while fetching SGT" },
|
|
[PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
|
|
"PRB not on qword boundary" },
|
|
[PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI target abort while fetching PRB" },
|
|
[PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI master abort while fetching PRB" },
|
|
[PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI parity error while fetching PRB" },
|
|
[PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"undefined error while transferring data" },
|
|
[PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI target abort while transferring data" },
|
|
[PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI master abort while transferring data" },
|
|
[PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
|
|
"PCI parity error while transferring data" },
|
|
[PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
|
|
"FIS received while sending service FIS" },
|
|
};
|
|
|
|
/*
|
|
* ap->private_data
|
|
*
|
|
* The preview driver always returned 0 for status. We emulate it
|
|
* here from the previous interrupt.
|
|
*/
|
|
struct sil24_port_priv {
|
|
union sil24_cmd_block *cmd_block; /* 32 cmd blocks */
|
|
dma_addr_t cmd_block_dma; /* DMA base addr for them */
|
|
struct ata_taskfile tf; /* Cached taskfile registers */
|
|
};
|
|
|
|
/* ap->host_set->private_data */
|
|
struct sil24_host_priv {
|
|
void __iomem *host_base; /* global controller control (128 bytes @BAR0) */
|
|
void __iomem *port_base; /* port registers (4 * 8192 bytes @BAR2) */
|
|
};
|
|
|
|
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev);
|
|
static u8 sil24_check_status(struct ata_port *ap);
|
|
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
|
|
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
|
|
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void sil24_qc_prep(struct ata_queued_cmd *qc);
|
|
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
|
|
static void sil24_irq_clear(struct ata_port *ap);
|
|
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
|
|
static void sil24_freeze(struct ata_port *ap);
|
|
static void sil24_thaw(struct ata_port *ap);
|
|
static void sil24_error_handler(struct ata_port *ap);
|
|
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static int sil24_port_start(struct ata_port *ap);
|
|
static void sil24_port_stop(struct ata_port *ap);
|
|
static void sil24_host_stop(struct ata_host_set *host_set);
|
|
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
|
|
static const struct pci_device_id sil24_pci_tbl[] = {
|
|
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
|
|
{ 0x8086, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
|
|
{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
|
|
{ 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
|
|
{ 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver sil24_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sil24_pci_tbl,
|
|
.probe = sil24_init_one,
|
|
.remove = ata_pci_remove_one, /* safe? */
|
|
};
|
|
|
|
static struct scsi_host_template sil24_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.change_queue_depth = ata_scsi_change_queue_depth,
|
|
.can_queue = SIL24_MAX_CMDS,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static const struct ata_port_operations sil24_ops = {
|
|
.port_disable = ata_port_disable,
|
|
|
|
.dev_config = sil24_dev_config,
|
|
|
|
.check_status = sil24_check_status,
|
|
.check_altstatus = sil24_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = sil24_tf_read,
|
|
|
|
.qc_prep = sil24_qc_prep,
|
|
.qc_issue = sil24_qc_issue,
|
|
|
|
.irq_handler = sil24_interrupt,
|
|
.irq_clear = sil24_irq_clear,
|
|
|
|
.scr_read = sil24_scr_read,
|
|
.scr_write = sil24_scr_write,
|
|
|
|
.freeze = sil24_freeze,
|
|
.thaw = sil24_thaw,
|
|
.error_handler = sil24_error_handler,
|
|
.post_internal_cmd = sil24_post_internal_cmd,
|
|
|
|
.port_start = sil24_port_start,
|
|
.port_stop = sil24_port_stop,
|
|
.host_stop = sil24_host_stop,
|
|
};
|
|
|
|
/*
|
|
* Use bits 30-31 of host_flags to encode available port numbers.
|
|
* Current maxium is 4.
|
|
*/
|
|
#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30)
|
|
#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1)
|
|
|
|
static struct ata_port_info sil24_port_info[] = {
|
|
/* sil_3124 */
|
|
{
|
|
.sht = &sil24_sht,
|
|
.host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
|
|
SIL24_FLAG_PCIX_IRQ_WOC,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
/* sil_3132 */
|
|
{
|
|
.sht = &sil24_sht,
|
|
.host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
/* sil_3131/sil_3531 */
|
|
{
|
|
.sht = &sil24_sht,
|
|
.host_flags = SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma0-2 */
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
.port_ops = &sil24_ops,
|
|
},
|
|
};
|
|
|
|
static int sil24_tag(int tag)
|
|
{
|
|
if (unlikely(ata_tag_internal(tag)))
|
|
return 0;
|
|
return tag;
|
|
}
|
|
|
|
static void sil24_dev_config(struct ata_port *ap, struct ata_device *dev)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
|
|
if (dev->cdb_len == 16)
|
|
writel(PORT_CS_CDB16, port + PORT_CTRL_STAT);
|
|
else
|
|
writel(PORT_CS_CDB16, port + PORT_CTRL_CLR);
|
|
}
|
|
|
|
static inline void sil24_update_tf(struct ata_port *ap)
|
|
{
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
struct sil24_prb __iomem *prb = port;
|
|
u8 fis[6 * 4];
|
|
|
|
memcpy_fromio(fis, prb->fis, 6 * 4);
|
|
ata_tf_from_fis(fis, &pp->tf);
|
|
}
|
|
|
|
static u8 sil24_check_status(struct ata_port *ap)
|
|
{
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
return pp->tf.command;
|
|
}
|
|
|
|
static int sil24_scr_map[] = {
|
|
[SCR_CONTROL] = 0,
|
|
[SCR_STATUS] = 1,
|
|
[SCR_ERROR] = 2,
|
|
[SCR_ACTIVE] = 3,
|
|
};
|
|
|
|
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg)
|
|
{
|
|
void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
|
|
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
|
|
void __iomem *addr;
|
|
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
|
|
return readl(scr_addr + sil24_scr_map[sc_reg] * 4);
|
|
}
|
|
return 0xffffffffU;
|
|
}
|
|
|
|
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
|
|
{
|
|
void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
|
|
if (sc_reg < ARRAY_SIZE(sil24_scr_map)) {
|
|
void __iomem *addr;
|
|
addr = scr_addr + sil24_scr_map[sc_reg] * 4;
|
|
writel(val, scr_addr + sil24_scr_map[sc_reg] * 4);
|
|
}
|
|
}
|
|
|
|
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
*tf = pp->tf;
|
|
}
|
|
|
|
static int sil24_init_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
|
|
ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_INIT, PORT_CS_INIT, 10, 100);
|
|
tmp = ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_RDY, 0, 10, 100);
|
|
|
|
if ((tmp & (PORT_CS_INIT | PORT_CS_RDY)) != PORT_CS_RDY)
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static int sil24_softreset(struct ata_port *ap, unsigned int *class)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
|
|
dma_addr_t paddr = pp->cmd_block_dma;
|
|
u32 mask, irq_stat;
|
|
const char *reason;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (ata_port_offline(ap)) {
|
|
DPRINTK("PHY reports no device\n");
|
|
*class = ATA_DEV_NONE;
|
|
goto out;
|
|
}
|
|
|
|
/* put the port into known state */
|
|
if (sil24_init_port(ap)) {
|
|
reason ="port not ready";
|
|
goto err;
|
|
}
|
|
|
|
/* do SRST */
|
|
prb->ctrl = cpu_to_le16(PRB_CTRL_SRST);
|
|
prb->fis[1] = 0; /* no PM yet */
|
|
|
|
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
|
|
writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
|
|
|
|
mask = (PORT_IRQ_COMPLETE | PORT_IRQ_ERROR) << PORT_IRQ_RAW_SHIFT;
|
|
irq_stat = ata_wait_register(port + PORT_IRQ_STAT, mask, 0x0,
|
|
100, ATA_TMOUT_BOOT / HZ * 1000);
|
|
|
|
writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
|
|
irq_stat >>= PORT_IRQ_RAW_SHIFT;
|
|
|
|
if (!(irq_stat & PORT_IRQ_COMPLETE)) {
|
|
if (irq_stat & PORT_IRQ_ERROR)
|
|
reason = "SRST command error";
|
|
else
|
|
reason = "timeout";
|
|
goto err;
|
|
}
|
|
|
|
sil24_update_tf(ap);
|
|
*class = ata_dev_classify(&pp->tf);
|
|
|
|
if (*class == ATA_DEV_UNKNOWN)
|
|
*class = ATA_DEV_NONE;
|
|
|
|
out:
|
|
DPRINTK("EXIT, class=%u\n", *class);
|
|
return 0;
|
|
|
|
err:
|
|
ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
|
|
return -EIO;
|
|
}
|
|
|
|
static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
const char *reason;
|
|
int tout_msec, rc;
|
|
u32 tmp;
|
|
|
|
/* sil24 does the right thing(tm) without any protection */
|
|
sata_set_spd(ap);
|
|
|
|
tout_msec = 100;
|
|
if (ata_port_online(ap))
|
|
tout_msec = 5000;
|
|
|
|
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
|
|
tmp = ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
|
|
|
|
/* SStatus oscillates between zero and valid status after
|
|
* DEV_RST, debounce it.
|
|
*/
|
|
rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst);
|
|
if (rc) {
|
|
reason = "PHY debouncing failed";
|
|
goto err;
|
|
}
|
|
|
|
if (tmp & PORT_CS_DEV_RST) {
|
|
if (ata_port_offline(ap))
|
|
return 0;
|
|
reason = "link not ready";
|
|
goto err;
|
|
}
|
|
|
|
/* Sil24 doesn't store signature FIS after hardreset, so we
|
|
* can't wait for BSY to clear. Some devices take a long time
|
|
* to get ready and those devices will choke if we don't wait
|
|
* for BSY clearance here. Tell libata to perform follow-up
|
|
* softreset.
|
|
*/
|
|
return -EAGAIN;
|
|
|
|
err:
|
|
ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason);
|
|
return -EIO;
|
|
}
|
|
|
|
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
|
|
struct sil24_sge *sge)
|
|
{
|
|
struct scatterlist *sg;
|
|
unsigned int idx = 0;
|
|
|
|
ata_for_each_sg(sg, qc) {
|
|
sge->addr = cpu_to_le64(sg_dma_address(sg));
|
|
sge->cnt = cpu_to_le32(sg_dma_len(sg));
|
|
if (ata_sg_is_last(sg, qc))
|
|
sge->flags = cpu_to_le32(SGE_TRM);
|
|
else
|
|
sge->flags = 0;
|
|
|
|
sge++;
|
|
idx++;
|
|
}
|
|
}
|
|
|
|
static void sil24_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
union sil24_cmd_block *cb;
|
|
struct sil24_prb *prb;
|
|
struct sil24_sge *sge;
|
|
u16 ctrl = 0;
|
|
|
|
cb = &pp->cmd_block[sil24_tag(qc->tag)];
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_PIO:
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NCQ:
|
|
case ATA_PROT_NODATA:
|
|
prb = &cb->ata.prb;
|
|
sge = cb->ata.sge;
|
|
break;
|
|
|
|
case ATA_PROT_ATAPI:
|
|
case ATA_PROT_ATAPI_DMA:
|
|
case ATA_PROT_ATAPI_NODATA:
|
|
prb = &cb->atapi.prb;
|
|
sge = cb->atapi.sge;
|
|
memset(cb->atapi.cdb, 0, 32);
|
|
memcpy(cb->atapi.cdb, qc->cdb, qc->dev->cdb_len);
|
|
|
|
if (qc->tf.protocol != ATA_PROT_ATAPI_NODATA) {
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
ctrl = PRB_CTRL_PACKET_WRITE;
|
|
else
|
|
ctrl = PRB_CTRL_PACKET_READ;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
prb = NULL; /* shut up, gcc */
|
|
sge = NULL;
|
|
BUG();
|
|
}
|
|
|
|
prb->ctrl = cpu_to_le16(ctrl);
|
|
ata_tf_to_fis(&qc->tf, prb->fis, 0);
|
|
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
sil24_fill_sg(qc, sge);
|
|
}
|
|
|
|
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
unsigned int tag = sil24_tag(qc->tag);
|
|
dma_addr_t paddr;
|
|
void __iomem *activate;
|
|
|
|
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
|
|
activate = port + PORT_CMD_ACTIVATE + tag * 8;
|
|
|
|
writel((u32)paddr, activate);
|
|
writel((u64)paddr >> 32, activate + 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sil24_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* unused */
|
|
}
|
|
|
|
static void sil24_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
|
|
/* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
|
|
* PORT_IRQ_ENABLE instead.
|
|
*/
|
|
writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
|
|
}
|
|
|
|
static void sil24_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
/* clear IRQ */
|
|
tmp = readl(port + PORT_IRQ_STAT);
|
|
writel(tmp, port + PORT_IRQ_STAT);
|
|
|
|
/* turn IRQ back on */
|
|
writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
|
|
}
|
|
|
|
static void sil24_error_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
int freeze = 0;
|
|
u32 irq_stat;
|
|
|
|
/* on error, we need to clear IRQ explicitly */
|
|
irq_stat = readl(port + PORT_IRQ_STAT);
|
|
writel(irq_stat, port + PORT_IRQ_STAT);
|
|
|
|
/* first, analyze and record host port events */
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
|
|
|
|
if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, ", %s",
|
|
irq_stat & PORT_IRQ_PHYRDY_CHG ?
|
|
"PHY RDY changed" : "device exchanged");
|
|
freeze = 1;
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_UNK_FIS) {
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(ehi , ", unknown FIS");
|
|
freeze = 1;
|
|
}
|
|
|
|
/* deal with command error */
|
|
if (irq_stat & PORT_IRQ_ERROR) {
|
|
struct sil24_cerr_info *ci = NULL;
|
|
unsigned int err_mask = 0, action = 0;
|
|
struct ata_queued_cmd *qc;
|
|
u32 cerr;
|
|
|
|
/* analyze CMD_ERR */
|
|
cerr = readl(port + PORT_CMD_ERR);
|
|
if (cerr < ARRAY_SIZE(sil24_cerr_db))
|
|
ci = &sil24_cerr_db[cerr];
|
|
|
|
if (ci && ci->desc) {
|
|
err_mask |= ci->err_mask;
|
|
action |= ci->action;
|
|
ata_ehi_push_desc(ehi, ", %s", ci->desc);
|
|
} else {
|
|
err_mask |= AC_ERR_OTHER;
|
|
action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(ehi, ", unknown command error %d",
|
|
cerr);
|
|
}
|
|
|
|
/* record error info */
|
|
qc = ata_qc_from_tag(ap, ap->active_tag);
|
|
if (qc) {
|
|
sil24_update_tf(ap);
|
|
qc->err_mask |= err_mask;
|
|
} else
|
|
ehi->err_mask |= err_mask;
|
|
|
|
ehi->action |= action;
|
|
}
|
|
|
|
/* freeze or abort */
|
|
if (freeze)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void sil24_finish_qc(struct ata_queued_cmd *qc)
|
|
{
|
|
if (qc->flags & ATA_QCFLAG_RESULT_TF)
|
|
sil24_update_tf(qc->ap);
|
|
}
|
|
|
|
static inline void sil24_host_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
|
|
u32 slot_stat, qc_active;
|
|
int rc;
|
|
|
|
slot_stat = readl(port + PORT_SLOT_STAT);
|
|
|
|
if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
|
|
sil24_error_intr(ap);
|
|
return;
|
|
}
|
|
|
|
if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
|
|
writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
|
|
|
|
qc_active = slot_stat & ~HOST_SSTAT_ATTN;
|
|
rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc);
|
|
if (rc > 0)
|
|
return;
|
|
if (rc < 0) {
|
|
struct ata_eh_info *ehi = &ap->eh_info;
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_port_freeze(ap);
|
|
return;
|
|
}
|
|
|
|
if (ata_ratelimit())
|
|
ata_port_printk(ap, KERN_INFO, "spurious interrupt "
|
|
"(slot_stat 0x%x active_tag %d sactive 0x%x)\n",
|
|
slot_stat, ap->active_tag, ap->sactive);
|
|
}
|
|
|
|
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
|
|
{
|
|
struct ata_host_set *host_set = dev_instance;
|
|
struct sil24_host_priv *hpriv = host_set->private_data;
|
|
unsigned handled = 0;
|
|
u32 status;
|
|
int i;
|
|
|
|
status = readl(hpriv->host_base + HOST_IRQ_STAT);
|
|
|
|
if (status == 0xffffffff) {
|
|
printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, "
|
|
"PCI fault or device removal?\n");
|
|
goto out;
|
|
}
|
|
|
|
if (!(status & IRQ_STAT_4PORTS))
|
|
goto out;
|
|
|
|
spin_lock(&host_set->lock);
|
|
|
|
for (i = 0; i < host_set->n_ports; i++)
|
|
if (status & (1 << i)) {
|
|
struct ata_port *ap = host_set->ports[i];
|
|
if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
|
|
sil24_host_intr(host_set->ports[i]);
|
|
handled++;
|
|
} else
|
|
printk(KERN_ERR DRV_NAME
|
|
": interrupt from disabled port %d\n", i);
|
|
}
|
|
|
|
spin_unlock(&host_set->lock);
|
|
out:
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void sil24_error_handler(struct ata_port *ap)
|
|
{
|
|
struct ata_eh_context *ehc = &ap->eh_context;
|
|
|
|
if (sil24_init_port(ap)) {
|
|
ata_eh_freeze_port(ap);
|
|
ehc->i.action |= ATA_EH_HARDRESET;
|
|
}
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, sil24_softreset, sil24_hardreset,
|
|
ata_std_postreset);
|
|
}
|
|
|
|
static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
qc->err_mask |= AC_ERR_OTHER;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->err_mask)
|
|
sil24_init_port(ap);
|
|
}
|
|
|
|
static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev)
|
|
{
|
|
const size_t cb_size = sizeof(*pp->cmd_block) * SIL24_MAX_CMDS;
|
|
|
|
dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma);
|
|
}
|
|
|
|
static int sil24_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct sil24_port_priv *pp;
|
|
union sil24_cmd_block *cb;
|
|
size_t cb_size = sizeof(*cb) * SIL24_MAX_CMDS;
|
|
dma_addr_t cb_dma;
|
|
int rc = -ENOMEM;
|
|
|
|
pp = kzalloc(sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
goto err_out;
|
|
|
|
pp->tf.command = ATA_DRDY;
|
|
|
|
cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL);
|
|
if (!cb)
|
|
goto err_out_pp;
|
|
memset(cb, 0, cb_size);
|
|
|
|
rc = ata_pad_alloc(ap, dev);
|
|
if (rc)
|
|
goto err_out_pad;
|
|
|
|
pp->cmd_block = cb;
|
|
pp->cmd_block_dma = cb_dma;
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
|
|
err_out_pad:
|
|
sil24_cblk_free(pp, dev);
|
|
err_out_pp:
|
|
kfree(pp);
|
|
err_out:
|
|
return rc;
|
|
}
|
|
|
|
static void sil24_port_stop(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host_set->dev;
|
|
struct sil24_port_priv *pp = ap->private_data;
|
|
|
|
sil24_cblk_free(pp, dev);
|
|
ata_pad_free(ap, dev);
|
|
kfree(pp);
|
|
}
|
|
|
|
static void sil24_host_stop(struct ata_host_set *host_set)
|
|
{
|
|
struct sil24_host_priv *hpriv = host_set->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(host_set->dev);
|
|
|
|
pci_iounmap(pdev, hpriv->host_base);
|
|
pci_iounmap(pdev, hpriv->port_base);
|
|
kfree(hpriv);
|
|
}
|
|
|
|
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version = 0;
|
|
unsigned int board_id = (unsigned int)ent->driver_data;
|
|
struct ata_port_info *pinfo = &sil24_port_info[board_id];
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
struct sil24_host_priv *hpriv = NULL;
|
|
void __iomem *host_base = NULL;
|
|
void __iomem *port_base = NULL;
|
|
int i, rc;
|
|
u32 tmp;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc)
|
|
goto out_disable;
|
|
|
|
rc = -ENOMEM;
|
|
/* map mmio registers */
|
|
host_base = pci_iomap(pdev, 0, 0);
|
|
if (!host_base)
|
|
goto out_free;
|
|
port_base = pci_iomap(pdev, 2, 0);
|
|
if (!port_base)
|
|
goto out_free;
|
|
|
|
/* allocate & init probe_ent and hpriv */
|
|
probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
|
|
if (!probe_ent)
|
|
goto out_free;
|
|
|
|
hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
goto out_free;
|
|
|
|
probe_ent->dev = pci_dev_to_dev(pdev);
|
|
INIT_LIST_HEAD(&probe_ent->node);
|
|
|
|
probe_ent->sht = pinfo->sht;
|
|
probe_ent->host_flags = pinfo->host_flags;
|
|
probe_ent->pio_mask = pinfo->pio_mask;
|
|
probe_ent->mwdma_mask = pinfo->mwdma_mask;
|
|
probe_ent->udma_mask = pinfo->udma_mask;
|
|
probe_ent->port_ops = pinfo->port_ops;
|
|
probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags);
|
|
|
|
probe_ent->irq = pdev->irq;
|
|
probe_ent->irq_flags = SA_SHIRQ;
|
|
probe_ent->mmio_base = port_base;
|
|
probe_ent->private_data = hpriv;
|
|
|
|
hpriv->host_base = host_base;
|
|
hpriv->port_base = port_base;
|
|
|
|
/*
|
|
* Configure the device
|
|
*/
|
|
if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"64-bit DMA enable failed\n");
|
|
goto out_free;
|
|
}
|
|
}
|
|
} else {
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
goto out_free;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
goto out_free;
|
|
}
|
|
}
|
|
|
|
/* GPIO off */
|
|
writel(0, host_base + HOST_FLASH_CMD);
|
|
|
|
/* Apply workaround for completion IRQ loss on PCI-X errata */
|
|
if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC) {
|
|
tmp = readl(host_base + HOST_CTRL);
|
|
if (tmp & (HOST_CTRL_TRDY | HOST_CTRL_STOP | HOST_CTRL_DEVSEL))
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"Applying completion IRQ loss on PCI-X "
|
|
"errata fix\n");
|
|
else
|
|
probe_ent->host_flags &= ~SIL24_FLAG_PCIX_IRQ_WOC;
|
|
}
|
|
|
|
/* clear global reset & mask interrupts during initialization */
|
|
writel(0, host_base + HOST_CTRL);
|
|
|
|
for (i = 0; i < probe_ent->n_ports; i++) {
|
|
void __iomem *port = port_base + i * PORT_REGS_SIZE;
|
|
unsigned long portu = (unsigned long)port;
|
|
|
|
probe_ent->port[i].cmd_addr = portu;
|
|
probe_ent->port[i].scr_addr = portu + PORT_SCONTROL;
|
|
|
|
ata_std_ports(&probe_ent->port[i]);
|
|
|
|
/* Initial PHY setting */
|
|
writel(0x20c, port + PORT_PHY_CFG);
|
|
|
|
/* Clear port RST */
|
|
tmp = readl(port + PORT_CTRL_STAT);
|
|
if (tmp & PORT_CS_PORT_RST) {
|
|
writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR);
|
|
tmp = ata_wait_register(port + PORT_CTRL_STAT,
|
|
PORT_CS_PORT_RST,
|
|
PORT_CS_PORT_RST, 10, 100);
|
|
if (tmp & PORT_CS_PORT_RST)
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"failed to clear port RST\n");
|
|
}
|
|
|
|
/* Configure IRQ WoC */
|
|
if (probe_ent->host_flags & SIL24_FLAG_PCIX_IRQ_WOC)
|
|
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_STAT);
|
|
else
|
|
writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
|
|
|
|
/* Zero error counters. */
|
|
writel(0x8000, port + PORT_DECODE_ERR_THRESH);
|
|
writel(0x8000, port + PORT_CRC_ERR_THRESH);
|
|
writel(0x8000, port + PORT_HSHK_ERR_THRESH);
|
|
writel(0x0000, port + PORT_DECODE_ERR_CNT);
|
|
writel(0x0000, port + PORT_CRC_ERR_CNT);
|
|
writel(0x0000, port + PORT_HSHK_ERR_CNT);
|
|
|
|
/* Always use 64bit activation */
|
|
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
|
|
|
|
/* Clear port multiplier enable and resume bits */
|
|
writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
|
|
}
|
|
|
|
/* Turn on interrupts */
|
|
writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* FIXME: check ata_device_add return value */
|
|
ata_device_add(probe_ent);
|
|
|
|
kfree(probe_ent);
|
|
return 0;
|
|
|
|
out_free:
|
|
if (host_base)
|
|
pci_iounmap(pdev, host_base);
|
|
if (port_base)
|
|
pci_iounmap(pdev, port_base);
|
|
kfree(probe_ent);
|
|
kfree(hpriv);
|
|
pci_release_regions(pdev);
|
|
out_disable:
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
}
|
|
|
|
static int __init sil24_init(void)
|
|
{
|
|
return pci_module_init(&sil24_pci_driver);
|
|
}
|
|
|
|
static void __exit sil24_exit(void)
|
|
{
|
|
pci_unregister_driver(&sil24_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Tejun Heo");
|
|
MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
|
|
|
|
module_init(sil24_init);
|
|
module_exit(sil24_exit);
|