5f97f7f940
This adds support for the Atmel AVR32 architecture as well as the AT32AP7000 CPU and the AT32STK1000 development board. AVR32 is a new high-performance 32-bit RISC microprocessor core, designed for cost-sensitive embedded applications, with particular emphasis on low power consumption and high code density. The AVR32 architecture is not binary compatible with earlier 8-bit AVR architectures. The AVR32 architecture, including the instruction set, is described by the AVR32 Architecture Manual, available from http://www.atmel.com/dyn/resources/prod_documents/doc32000.pdf The Atmel AT32AP7000 is the first CPU implementing the AVR32 architecture. It features a 7-stage pipeline, 16KB instruction and data caches and a full Memory Management Unit. It also comes with a large set of integrated peripherals, many of which are shared with the AT91 ARM-based controllers from Atmel. Full data sheet is available from http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf while the CPU core implementation including caches and MMU is documented by the AVR32 AP Technical Reference, available from http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf Information about the AT32STK1000 development board can be found at http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3918 including a BSP CD image with an earlier version of this patch, development tools (binaries and source/patches) and a root filesystem image suitable for booting from SD card. Alternatively, there's a preliminary "getting started" guide available at http://avr32linux.org/twiki/bin/view/Main/GettingStarted which provides links to the sources and patches you will need in order to set up a cross-compiling environment for avr32-linux. This patch, as well as the other patches included with the BSP and the toolchain patches, is actively supported by Atmel Corporation. [dmccr@us.ibm.com: Fix more pxx_page macro locations] [bunk@stusta.de: fix `make defconfig'] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Dave McCracken <dmccr@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
481 lines
12 KiB
C
481 lines
12 KiB
C
/*
|
|
* Copyright (C) 2004-2006 Atmel Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/swap.h>
|
|
#include <linux/init.h>
|
|
#include <linux/initrd.h>
|
|
#include <linux/mmzone.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/pagemap.h>
|
|
#include <linux/pfn.h>
|
|
#include <linux/nodemask.h>
|
|
|
|
#include <asm/page.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/tlb.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/sections.h>
|
|
|
|
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
|
|
|
|
pgd_t swapper_pg_dir[PTRS_PER_PGD];
|
|
|
|
struct page *empty_zero_page;
|
|
|
|
/*
|
|
* Cache of MMU context last used.
|
|
*/
|
|
unsigned long mmu_context_cache = NO_CONTEXT;
|
|
|
|
#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
|
|
#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
|
|
|
|
void show_mem(void)
|
|
{
|
|
int total = 0, reserved = 0, cached = 0;
|
|
int slab = 0, free = 0, shared = 0;
|
|
pg_data_t *pgdat;
|
|
|
|
printk("Mem-info:\n");
|
|
show_free_areas();
|
|
|
|
for_each_online_pgdat(pgdat) {
|
|
struct page *page, *end;
|
|
|
|
page = pgdat->node_mem_map;
|
|
end = page + pgdat->node_spanned_pages;
|
|
|
|
do {
|
|
total++;
|
|
if (PageReserved(page))
|
|
reserved++;
|
|
else if (PageSwapCache(page))
|
|
cached++;
|
|
else if (PageSlab(page))
|
|
slab++;
|
|
else if (!page_count(page))
|
|
free++;
|
|
else
|
|
shared += page_count(page) - 1;
|
|
page++;
|
|
} while (page < end);
|
|
}
|
|
|
|
printk ("%d pages of RAM\n", total);
|
|
printk ("%d free pages\n", free);
|
|
printk ("%d reserved pages\n", reserved);
|
|
printk ("%d slab pages\n", slab);
|
|
printk ("%d pages shared\n", shared);
|
|
printk ("%d pages swap cached\n", cached);
|
|
}
|
|
|
|
static void __init print_memory_map(const char *what,
|
|
struct tag_mem_range *mem)
|
|
{
|
|
printk ("%s:\n", what);
|
|
for (; mem; mem = mem->next) {
|
|
printk (" %08lx - %08lx\n",
|
|
(unsigned long)mem->addr,
|
|
(unsigned long)(mem->addr + mem->size));
|
|
}
|
|
}
|
|
|
|
#define MAX_LOWMEM HIGHMEM_START
|
|
#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
|
|
|
|
/*
|
|
* Sort a list of memory regions in-place by ascending address.
|
|
*
|
|
* We're using bubble sort because we only have singly linked lists
|
|
* with few elements.
|
|
*/
|
|
static void __init sort_mem_list(struct tag_mem_range **pmem)
|
|
{
|
|
int done;
|
|
struct tag_mem_range **a, **b;
|
|
|
|
if (!*pmem)
|
|
return;
|
|
|
|
do {
|
|
done = 1;
|
|
a = pmem, b = &(*pmem)->next;
|
|
while (*b) {
|
|
if ((*a)->addr > (*b)->addr) {
|
|
struct tag_mem_range *tmp;
|
|
tmp = (*b)->next;
|
|
(*b)->next = *a;
|
|
*a = *b;
|
|
*b = tmp;
|
|
done = 0;
|
|
}
|
|
a = &(*a)->next;
|
|
b = &(*a)->next;
|
|
}
|
|
} while (!done);
|
|
}
|
|
|
|
/*
|
|
* Find a free memory region large enough for storing the
|
|
* bootmem bitmap.
|
|
*/
|
|
static unsigned long __init
|
|
find_bootmap_pfn(const struct tag_mem_range *mem)
|
|
{
|
|
unsigned long bootmap_pages, bootmap_len;
|
|
unsigned long node_pages = PFN_UP(mem->size);
|
|
unsigned long bootmap_addr = mem->addr;
|
|
struct tag_mem_range *reserved = mem_reserved;
|
|
struct tag_mem_range *ramdisk = mem_ramdisk;
|
|
unsigned long kern_start = virt_to_phys(_stext);
|
|
unsigned long kern_end = virt_to_phys(_end);
|
|
|
|
bootmap_pages = bootmem_bootmap_pages(node_pages);
|
|
bootmap_len = bootmap_pages << PAGE_SHIFT;
|
|
|
|
/*
|
|
* Find a large enough region without reserved pages for
|
|
* storing the bootmem bitmap. We can take advantage of the
|
|
* fact that all lists have been sorted.
|
|
*
|
|
* We have to check explicitly reserved regions as well as the
|
|
* kernel image and any RAMDISK images...
|
|
*
|
|
* Oh, and we have to make sure we don't overwrite the taglist
|
|
* since we're going to use it until the bootmem allocator is
|
|
* fully up and running.
|
|
*/
|
|
while (1) {
|
|
if ((bootmap_addr < kern_end) &&
|
|
((bootmap_addr + bootmap_len) > kern_start))
|
|
bootmap_addr = kern_end;
|
|
|
|
while (reserved &&
|
|
(bootmap_addr >= (reserved->addr + reserved->size)))
|
|
reserved = reserved->next;
|
|
|
|
if (reserved &&
|
|
((bootmap_addr + bootmap_len) >= reserved->addr)) {
|
|
bootmap_addr = reserved->addr + reserved->size;
|
|
continue;
|
|
}
|
|
|
|
while (ramdisk &&
|
|
(bootmap_addr >= (ramdisk->addr + ramdisk->size)))
|
|
ramdisk = ramdisk->next;
|
|
|
|
if (!ramdisk ||
|
|
((bootmap_addr + bootmap_len) < ramdisk->addr))
|
|
break;
|
|
|
|
bootmap_addr = ramdisk->addr + ramdisk->size;
|
|
}
|
|
|
|
if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size))
|
|
return ~0UL;
|
|
|
|
return PFN_UP(bootmap_addr);
|
|
}
|
|
|
|
void __init setup_bootmem(void)
|
|
{
|
|
unsigned bootmap_size;
|
|
unsigned long first_pfn, bootmap_pfn, pages;
|
|
unsigned long max_pfn, max_low_pfn;
|
|
unsigned long kern_start = virt_to_phys(_stext);
|
|
unsigned long kern_end = virt_to_phys(_end);
|
|
unsigned node = 0;
|
|
struct tag_mem_range *bank, *res;
|
|
|
|
sort_mem_list(&mem_phys);
|
|
sort_mem_list(&mem_reserved);
|
|
|
|
print_memory_map("Physical memory", mem_phys);
|
|
print_memory_map("Reserved memory", mem_reserved);
|
|
|
|
nodes_clear(node_online_map);
|
|
|
|
if (mem_ramdisk) {
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
initrd_start = __va(mem_ramdisk->addr);
|
|
initrd_end = initrd_start + mem_ramdisk->size;
|
|
|
|
print_memory_map("RAMDISK images", mem_ramdisk);
|
|
if (mem_ramdisk->next)
|
|
printk(KERN_WARNING
|
|
"Warning: Only the first RAMDISK image "
|
|
"will be used\n");
|
|
sort_mem_list(&mem_ramdisk);
|
|
#else
|
|
printk(KERN_WARNING "RAM disk image present, but "
|
|
"no initrd support in kernel!\n");
|
|
#endif
|
|
}
|
|
|
|
if (mem_phys->next)
|
|
printk(KERN_WARNING "Only using first memory bank\n");
|
|
|
|
for (bank = mem_phys; bank; bank = NULL) {
|
|
first_pfn = PFN_UP(bank->addr);
|
|
max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size);
|
|
bootmap_pfn = find_bootmap_pfn(bank);
|
|
if (bootmap_pfn > max_pfn)
|
|
panic("No space for bootmem bitmap!\n");
|
|
|
|
if (max_low_pfn > MAX_LOWMEM_PFN) {
|
|
max_low_pfn = MAX_LOWMEM_PFN;
|
|
#ifndef CONFIG_HIGHMEM
|
|
/*
|
|
* Lowmem is memory that can be addressed
|
|
* directly through P1/P2
|
|
*/
|
|
printk(KERN_WARNING
|
|
"Node %u: Only %ld MiB of memory will be used.\n",
|
|
node, MAX_LOWMEM >> 20);
|
|
printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
|
|
#else
|
|
#error HIGHMEM is not supported by AVR32 yet
|
|
#endif
|
|
}
|
|
|
|
/* Initialize the boot-time allocator with low memory only. */
|
|
bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
|
|
first_pfn, max_low_pfn);
|
|
|
|
printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n",
|
|
node, NODE_DATA(node)->bdata,
|
|
NODE_DATA(node)->bdata->node_bootmem_map);
|
|
|
|
/*
|
|
* Register fully available RAM pages with the bootmem
|
|
* allocator.
|
|
*/
|
|
pages = max_low_pfn - first_pfn;
|
|
free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
|
|
PFN_PHYS(pages));
|
|
|
|
/*
|
|
* Reserve space for the kernel image (if present in
|
|
* this node)...
|
|
*/
|
|
if ((kern_start >= PFN_PHYS(first_pfn)) &&
|
|
(kern_start < PFN_PHYS(max_pfn))) {
|
|
printk("Node %u: Kernel image %08lx - %08lx\n",
|
|
node, kern_start, kern_end);
|
|
reserve_bootmem_node(NODE_DATA(node), kern_start,
|
|
kern_end - kern_start);
|
|
}
|
|
|
|
/* ...the bootmem bitmap... */
|
|
reserve_bootmem_node(NODE_DATA(node),
|
|
PFN_PHYS(bootmap_pfn),
|
|
bootmap_size);
|
|
|
|
/* ...any RAMDISK images... */
|
|
for (res = mem_ramdisk; res; res = res->next) {
|
|
if (res->addr > PFN_PHYS(max_pfn))
|
|
break;
|
|
|
|
if (res->addr >= PFN_PHYS(first_pfn)) {
|
|
printk("Node %u: RAMDISK %08lx - %08lx\n",
|
|
node,
|
|
(unsigned long)res->addr,
|
|
(unsigned long)(res->addr + res->size));
|
|
reserve_bootmem_node(NODE_DATA(node),
|
|
res->addr, res->size);
|
|
}
|
|
}
|
|
|
|
/* ...and any other reserved regions. */
|
|
for (res = mem_reserved; res; res = res->next) {
|
|
if (res->addr > PFN_PHYS(max_pfn))
|
|
break;
|
|
|
|
if (res->addr >= PFN_PHYS(first_pfn)) {
|
|
printk("Node %u: Reserved %08lx - %08lx\n",
|
|
node,
|
|
(unsigned long)res->addr,
|
|
(unsigned long)(res->addr + res->size));
|
|
reserve_bootmem_node(NODE_DATA(node),
|
|
res->addr, res->size);
|
|
}
|
|
}
|
|
|
|
node_set_online(node);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* paging_init() sets up the page tables
|
|
*
|
|
* This routine also unmaps the page at virtual kernel address 0, so
|
|
* that we can trap those pesky NULL-reference errors in the kernel.
|
|
*/
|
|
void __init paging_init(void)
|
|
{
|
|
extern unsigned long _evba;
|
|
void *zero_page;
|
|
int nid;
|
|
|
|
/*
|
|
* Make sure we can handle exceptions before enabling
|
|
* paging. Not that we should ever _get_ any exceptions this
|
|
* early, but you never know...
|
|
*/
|
|
printk("Exception vectors start at %p\n", &_evba);
|
|
sysreg_write(EVBA, (unsigned long)&_evba);
|
|
|
|
/*
|
|
* Since we are ready to handle exceptions now, we should let
|
|
* the CPU generate them...
|
|
*/
|
|
__asm__ __volatile__ ("csrf %0" : : "i"(SR_EM_BIT));
|
|
|
|
/*
|
|
* Allocate the zero page. The allocator will panic if it
|
|
* can't satisfy the request, so no need to check.
|
|
*/
|
|
zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
|
|
PAGE_SIZE);
|
|
|
|
{
|
|
pgd_t *pg_dir;
|
|
int i;
|
|
|
|
pg_dir = swapper_pg_dir;
|
|
sysreg_write(PTBR, (unsigned long)pg_dir);
|
|
|
|
for (i = 0; i < PTRS_PER_PGD; i++)
|
|
pgd_val(pg_dir[i]) = 0;
|
|
|
|
enable_mmu();
|
|
printk ("CPU: Paging enabled\n");
|
|
}
|
|
|
|
for_each_online_node(nid) {
|
|
pg_data_t *pgdat = NODE_DATA(nid);
|
|
unsigned long zones_size[MAX_NR_ZONES];
|
|
unsigned long low, start_pfn;
|
|
|
|
start_pfn = pgdat->bdata->node_boot_start;
|
|
start_pfn >>= PAGE_SHIFT;
|
|
low = pgdat->bdata->node_low_pfn;
|
|
|
|
memset(zones_size, 0, sizeof(zones_size));
|
|
zones_size[ZONE_NORMAL] = low - start_pfn;
|
|
|
|
printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
|
|
nid, start_pfn, low);
|
|
|
|
free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL);
|
|
|
|
printk("Node %u: mem_map starts at %p\n",
|
|
pgdat->node_id, pgdat->node_mem_map);
|
|
}
|
|
|
|
mem_map = NODE_DATA(0)->node_mem_map;
|
|
|
|
memset(zero_page, 0, PAGE_SIZE);
|
|
empty_zero_page = virt_to_page(zero_page);
|
|
flush_dcache_page(empty_zero_page);
|
|
}
|
|
|
|
void __init mem_init(void)
|
|
{
|
|
int codesize, reservedpages, datasize, initsize;
|
|
int nid, i;
|
|
|
|
reservedpages = 0;
|
|
high_memory = NULL;
|
|
|
|
/* this will put all low memory onto the freelists */
|
|
for_each_online_node(nid) {
|
|
pg_data_t *pgdat = NODE_DATA(nid);
|
|
unsigned long node_pages = 0;
|
|
void *node_high_memory;
|
|
|
|
num_physpages += pgdat->node_present_pages;
|
|
|
|
if (pgdat->node_spanned_pages != 0)
|
|
node_pages = free_all_bootmem_node(pgdat);
|
|
|
|
totalram_pages += node_pages;
|
|
|
|
for (i = 0; i < node_pages; i++)
|
|
if (PageReserved(pgdat->node_mem_map + i))
|
|
reservedpages++;
|
|
|
|
node_high_memory = (void *)((pgdat->node_start_pfn
|
|
+ pgdat->node_spanned_pages)
|
|
<< PAGE_SHIFT);
|
|
if (node_high_memory > high_memory)
|
|
high_memory = node_high_memory;
|
|
}
|
|
|
|
max_mapnr = MAP_NR(high_memory);
|
|
|
|
codesize = (unsigned long)_etext - (unsigned long)_text;
|
|
datasize = (unsigned long)_edata - (unsigned long)_data;
|
|
initsize = (unsigned long)__init_end - (unsigned long)__init_begin;
|
|
|
|
printk ("Memory: %luk/%luk available (%dk kernel code, "
|
|
"%dk reserved, %dk data, %dk init)\n",
|
|
(unsigned long)nr_free_pages() << (PAGE_SHIFT - 10),
|
|
totalram_pages << (PAGE_SHIFT - 10),
|
|
codesize >> 10,
|
|
reservedpages << (PAGE_SHIFT - 10),
|
|
datasize >> 10,
|
|
initsize >> 10);
|
|
}
|
|
|
|
static inline void free_area(unsigned long addr, unsigned long end, char *s)
|
|
{
|
|
unsigned int size = (end - addr) >> 10;
|
|
|
|
for (; addr < end; addr += PAGE_SIZE) {
|
|
struct page *page = virt_to_page(addr);
|
|
ClearPageReserved(page);
|
|
init_page_count(page);
|
|
free_page(addr);
|
|
totalram_pages++;
|
|
}
|
|
|
|
if (size && s)
|
|
printk(KERN_INFO "Freeing %s memory: %dK (%lx - %lx)\n",
|
|
s, size, end - (size << 10), end);
|
|
}
|
|
|
|
void free_initmem(void)
|
|
{
|
|
free_area((unsigned long)__init_begin, (unsigned long)__init_end,
|
|
"init");
|
|
}
|
|
|
|
#ifdef CONFIG_BLK_DEV_INITRD
|
|
|
|
static int keep_initrd;
|
|
|
|
void free_initrd_mem(unsigned long start, unsigned long end)
|
|
{
|
|
if (!keep_initrd)
|
|
free_area(start, end, "initrd");
|
|
}
|
|
|
|
static int __init keepinitrd_setup(char *__unused)
|
|
{
|
|
keep_initrd = 1;
|
|
return 1;
|
|
}
|
|
|
|
__setup("keepinitrd", keepinitrd_setup);
|
|
#endif
|