android_kernel_xiaomi_sm8350/arch/sh/kernel/pm.c
Andriy Skulysh 3aa770e797 sh: APM/PM support.
This adds some simple PM stubs and the basic APM interfaces,
primarily for use by hp6xx, where the existing userland
expects it.

Signed-off-by: Andriy Skulysh <askulysh@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 16:20:22 +09:00

89 lines
1.8 KiB
C

/*
* Generic Power Management Routine
*
* Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License.
*/
#include <linux/suspend.h>
#include <linux/delay.h>
#include <linux/gfp.h>
#include <asm/freq.h>
#include <asm/io.h>
#include <asm/watchdog.h>
#include <asm/pm.h>
#define INTR_OFFSET 0x600
#define STBCR 0xffffff82
#define STBCR2 0xffffff88
#define STBCR_STBY 0x80
#define STBCR_MSTP2 0x04
#define MCR 0xffffff68
#define RTCNT 0xffffff70
#define MCR_RMODE 2
#define MCR_RFSH 4
void pm_enter(void)
{
u8 stbcr, csr;
u16 frqcr, mcr;
u32 vbr_new, vbr_old;
set_bl_bit();
/* set wdt */
csr = sh_wdt_read_csr();
csr &= ~WTCSR_TME;
csr |= WTCSR_CKS_4096;
sh_wdt_write_csr(csr);
csr = sh_wdt_read_csr();
sh_wdt_write_cnt(0);
/* disable PLL1 */
frqcr = ctrl_inw(FRQCR);
frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY);
ctrl_outw(frqcr, FRQCR);
/* enable standby */
stbcr = ctrl_inb(STBCR);
ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR);
/* set self-refresh */
mcr = ctrl_inw(MCR);
ctrl_outw(mcr & ~MCR_RFSH, MCR);
/* set interrupt handler */
asm volatile("stc vbr, %0" : "=r" (vbr_old));
vbr_new = get_zeroed_page(GFP_ATOMIC);
udelay(50);
memcpy((void*)(vbr_new + INTR_OFFSET),
&wakeup_start, &wakeup_end - &wakeup_start);
asm volatile("ldc %0, vbr" : : "r" (vbr_new));
ctrl_outw(0, RTCNT);
ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR);
cpu_sleep();
asm volatile("ldc %0, vbr" : : "r" (vbr_old));
free_page(vbr_new);
/* enable PLL1 */
frqcr = ctrl_inw(FRQCR);
frqcr |= FRQCR_PSTBY;
ctrl_outw(frqcr, FRQCR);
udelay(50);
frqcr |= FRQCR_PLLEN;
ctrl_outw(frqcr, FRQCR);
ctrl_outb(stbcr, STBCR);
clear_bl_bit();
}