android_kernel_xiaomi_sm8350/arch/mips/kernel/vmlinux.lds.S
Fenghua Yu 5fb7dc37dc define new percpu interface for shared data
per cpu data section contains two types of data.  One set which is
exclusively accessed by the local cpu and the other set which is per cpu,
but also shared by remote cpus.  In the current kernel, these two sets are
not clearely separated out.  This can potentially cause the same data
cacheline shared between the two sets of data, which will result in
unnecessary bouncing of the cacheline between cpus.

One way to fix the problem is to cacheline align the remotely accessed per
cpu data, both at the beginning and at the end.  Because of the padding at
both ends, this will likely cause some memory wastage and also the
interface to achieve this is not clean.

This patch:

Moves the remotely accessed per cpu data (which is currently marked
as ____cacheline_aligned_in_smp) into a different section, where all the data
elements are cacheline aligned. And as such, this differentiates the local
only data and remotely accessed data cleanly.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:44 -07:00

166 lines
3.7 KiB
ArmAsm
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#include <asm/asm-offsets.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips
#define mips mips
OUTPUT_ARCH(mips)
ENTRY(kernel_entry)
jiffies = JIFFIES;
SECTIONS
{
#ifdef CONFIG_BOOT_ELF64
/* Read-only sections, merged into text segment: */
/* . = 0xc000000000000000; */
/* This is the value for an Origin kernel, taken from an IRIX kernel. */
/* . = 0xc00000000001c000; */
/* Set the vaddr for the text segment to a value
>= 0xa800 0000 0001 9000 if no symmon is going to configured
>= 0xa800 0000 0030 0000 otherwise */
/* . = 0xa800000000300000; */
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
. = LOADADDR;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*(.fixup)
*(.gnu.warning)
} =0
_etext = .; /* End of text section */
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
__start___dbe_table = .; /* Exception table for data bus errors */
__dbe_table : { *(__dbe_table) }
__stop___dbe_table = .;
RODATA
/* writeable */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
/*
* This ALIGN is needed as a workaround for a bug a gcc bug upto 4.1 which
* limits the maximum alignment to at most 32kB and results in the following
* warning:
*
* CC arch/mips/kernel/init_task.o
* arch/mips/kernel/init_task.c:30: warning: alignment of init_thread_union
* is greater than maximum object file alignment. Using 32768
*/
. = ALIGN(_PAGE_SIZE);
*(.data.init_task)
DATA_DATA
CONSTRUCTORS
}
_gp = . + 0x8000;
.lit8 : { *(.lit8) }
.lit4 : { *(.lit4) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata : { *(.sdata) }
. = ALIGN(_PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
. = ALIGN(_PAGE_SIZE);
__nosave_end = .;
. = ALIGN(32);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
_edata = .; /* End of data section */
/* will be freed after init */
. = ALIGN(_PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
*(.init.text)
_einittext = .;
}
.init.data : { *(.init.data) }
. = ALIGN(16);
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
__initcall_start = .;
.initcall.init : {
INITCALLS
}
__initcall_end = .;
__con_initcall_start = .;
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
/* .exit.text is discarded at runtime, not link time, to deal with
references from .rodata */
.exit.text : { *(.exit.text) }
.exit.data : { *(.exit.data) }
#if defined(CONFIG_BLK_DEV_INITRD)
. = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
#endif
PERCPU(_PAGE_SIZE)
. = ALIGN(_PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
__bss_start = .; /* BSS */
.sbss : {
*(.sbss)
*(.scommon)
}
.bss : {
*(.bss)
*(COMMON)
}
__bss_stop = .;
_end = . ;
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
/* ABI crap starts here */
*(.comment)
*(.MIPS.options)
*(.note)
*(.options)
*(.pdr)
*(.reginfo)
*(.mdebug*)
}
/* This is the MIPS specific mdebug section. */
.mdebug : { *(.mdebug) }
STABS_DEBUG
DWARF_DEBUG
/* These must appear regardless of . */
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
.note : { *(.note) }
}