8baf560b4c
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
977 lines
23 KiB
C
977 lines
23 KiB
C
/*
|
|
* File: arch/blackfin/mach-common/ints-priority-sc.c
|
|
* Based on:
|
|
* Author:
|
|
*
|
|
* Created: ?
|
|
* Description: Set up the interrupt priorities
|
|
*
|
|
* Modified:
|
|
* 1996 Roman Zippel
|
|
* 1999 D. Jeff Dionne <jeff@uclinux.org>
|
|
* 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
|
|
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
|
|
* 2003 Metrowerks/Motorola
|
|
* 2003 Bas Vermeulen <bas@buyways.nl>
|
|
* Copyright 2004-2007 Analog Devices Inc.
|
|
*
|
|
* Bugs: Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see the file COPYING, or write
|
|
* to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel_stat.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/irq.h>
|
|
#ifdef CONFIG_KGDB
|
|
#include <linux/kgdb.h>
|
|
#endif
|
|
#include <asm/traps.h>
|
|
#include <asm/blackfin.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/irq_handler.h>
|
|
|
|
#ifdef BF537_FAMILY
|
|
# define BF537_GENERIC_ERROR_INT_DEMUX
|
|
#else
|
|
# undef BF537_GENERIC_ERROR_INT_DEMUX
|
|
#endif
|
|
|
|
/*
|
|
* NOTES:
|
|
* - we have separated the physical Hardware interrupt from the
|
|
* levels that the LINUX kernel sees (see the description in irq.h)
|
|
* -
|
|
*/
|
|
|
|
/* Initialize this to an actual value to force it into the .data
|
|
* section so that we know it is properly initialized at entry into
|
|
* the kernel but before bss is initialized to zero (which is where
|
|
* it would live otherwise). The 0x1f magic represents the IRQs we
|
|
* cannot actually mask out in hardware.
|
|
*/
|
|
unsigned long irq_flags = 0x1f;
|
|
|
|
/* The number of spurious interrupts */
|
|
atomic_t num_spurious;
|
|
|
|
struct ivgx {
|
|
/* irq number for request_irq, available in mach-bf533/irq.h */
|
|
unsigned int irqno;
|
|
/* corresponding bit in the SIC_ISR register */
|
|
unsigned int isrflag;
|
|
} ivg_table[NR_PERI_INTS];
|
|
|
|
struct ivg_slice {
|
|
/* position of first irq in ivg_table for given ivg */
|
|
struct ivgx *ifirst;
|
|
struct ivgx *istop;
|
|
} ivg7_13[IVG13 - IVG7 + 1];
|
|
|
|
static void search_IAR(void);
|
|
|
|
/*
|
|
* Search SIC_IAR and fill tables with the irqvalues
|
|
* and their positions in the SIC_ISR register.
|
|
*/
|
|
static void __init search_IAR(void)
|
|
{
|
|
unsigned ivg, irq_pos = 0;
|
|
for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
|
|
int irqn;
|
|
|
|
ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
|
|
|
|
for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
|
|
int iar_shift = (irqn & 7) * 4;
|
|
if (ivg ==
|
|
(0xf &
|
|
#ifndef CONFIG_BF52x
|
|
bfin_read32((unsigned long *)SIC_IAR0 +
|
|
(irqn >> 3)) >> iar_shift)) {
|
|
#else
|
|
bfin_read32((unsigned long *)SIC_IAR0 +
|
|
((irqn%32) >> 3) + ((irqn / 32) * 16)) >> iar_shift)) {
|
|
#endif
|
|
ivg_table[irq_pos].irqno = IVG7 + irqn;
|
|
ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
|
|
ivg7_13[ivg].istop++;
|
|
irq_pos++;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This is for BF533 internal IRQs
|
|
*/
|
|
|
|
static void ack_noop(unsigned int irq)
|
|
{
|
|
/* Dummy function. */
|
|
}
|
|
|
|
static void bfin_core_mask_irq(unsigned int irq)
|
|
{
|
|
irq_flags &= ~(1 << irq);
|
|
if (!irqs_disabled())
|
|
local_irq_enable();
|
|
}
|
|
|
|
static void bfin_core_unmask_irq(unsigned int irq)
|
|
{
|
|
irq_flags |= 1 << irq;
|
|
/*
|
|
* If interrupts are enabled, IMASK must contain the same value
|
|
* as irq_flags. Make sure that invariant holds. If interrupts
|
|
* are currently disabled we need not do anything; one of the
|
|
* callers will take care of setting IMASK to the proper value
|
|
* when reenabling interrupts.
|
|
* local_irq_enable just does "STI irq_flags", so it's exactly
|
|
* what we need.
|
|
*/
|
|
if (!irqs_disabled())
|
|
local_irq_enable();
|
|
return;
|
|
}
|
|
|
|
static void bfin_internal_mask_irq(unsigned int irq)
|
|
{
|
|
#ifdef CONFIG_BF53x
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
|
|
~(1 << (irq - (IRQ_CORETMR + 1))));
|
|
#else
|
|
unsigned mask_bank, mask_bit;
|
|
mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
|
|
mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
|
|
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
|
|
~(1 << mask_bit));
|
|
#endif
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_internal_unmask_irq(unsigned int irq)
|
|
{
|
|
#ifdef CONFIG_BF53x
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
|
|
(1 << (irq - (IRQ_CORETMR + 1))));
|
|
#else
|
|
unsigned mask_bank, mask_bit;
|
|
mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
|
|
mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
|
|
bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
|
|
(1 << mask_bit));
|
|
#endif
|
|
SSYNC();
|
|
}
|
|
|
|
static struct irq_chip bfin_core_irqchip = {
|
|
.ack = ack_noop,
|
|
.mask = bfin_core_mask_irq,
|
|
.unmask = bfin_core_unmask_irq,
|
|
};
|
|
|
|
static struct irq_chip bfin_internal_irqchip = {
|
|
.ack = ack_noop,
|
|
.mask = bfin_internal_mask_irq,
|
|
.unmask = bfin_internal_unmask_irq,
|
|
};
|
|
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
static int error_int_mask;
|
|
|
|
static void bfin_generic_error_ack_irq(unsigned int irq)
|
|
{
|
|
|
|
}
|
|
|
|
static void bfin_generic_error_mask_irq(unsigned int irq)
|
|
{
|
|
error_int_mask &= ~(1L << (irq - IRQ_PPI_ERROR));
|
|
|
|
if (!error_int_mask) {
|
|
local_irq_disable();
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
|
|
~(1 <<
|
|
(IRQ_GENERIC_ERROR -
|
|
(IRQ_CORETMR + 1))));
|
|
SSYNC();
|
|
local_irq_enable();
|
|
}
|
|
}
|
|
|
|
static void bfin_generic_error_unmask_irq(unsigned int irq)
|
|
{
|
|
local_irq_disable();
|
|
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() | 1 <<
|
|
(IRQ_GENERIC_ERROR - (IRQ_CORETMR + 1)));
|
|
SSYNC();
|
|
local_irq_enable();
|
|
|
|
error_int_mask |= 1L << (irq - IRQ_PPI_ERROR);
|
|
}
|
|
|
|
static struct irq_chip bfin_generic_error_irqchip = {
|
|
.ack = bfin_generic_error_ack_irq,
|
|
.mask = bfin_generic_error_mask_irq,
|
|
.unmask = bfin_generic_error_unmask_irq,
|
|
};
|
|
|
|
static void bfin_demux_error_irq(unsigned int int_err_irq,
|
|
struct irq_desc *intb_desc)
|
|
{
|
|
int irq = 0;
|
|
|
|
SSYNC();
|
|
|
|
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
|
|
if (bfin_read_EMAC_SYSTAT() & EMAC_ERR_MASK)
|
|
irq = IRQ_MAC_ERROR;
|
|
else
|
|
#endif
|
|
if (bfin_read_SPORT0_STAT() & SPORT_ERR_MASK)
|
|
irq = IRQ_SPORT0_ERROR;
|
|
else if (bfin_read_SPORT1_STAT() & SPORT_ERR_MASK)
|
|
irq = IRQ_SPORT1_ERROR;
|
|
else if (bfin_read_PPI_STATUS() & PPI_ERR_MASK)
|
|
irq = IRQ_PPI_ERROR;
|
|
else if (bfin_read_CAN_GIF() & CAN_ERR_MASK)
|
|
irq = IRQ_CAN_ERROR;
|
|
else if (bfin_read_SPI_STAT() & SPI_ERR_MASK)
|
|
irq = IRQ_SPI_ERROR;
|
|
else if ((bfin_read_UART0_IIR() & UART_ERR_MASK_STAT1) &&
|
|
(bfin_read_UART0_IIR() & UART_ERR_MASK_STAT0))
|
|
irq = IRQ_UART0_ERROR;
|
|
else if ((bfin_read_UART1_IIR() & UART_ERR_MASK_STAT1) &&
|
|
(bfin_read_UART1_IIR() & UART_ERR_MASK_STAT0))
|
|
irq = IRQ_UART1_ERROR;
|
|
|
|
if (irq) {
|
|
if (error_int_mask & (1L << (irq - IRQ_PPI_ERROR))) {
|
|
struct irq_desc *desc = irq_desc + irq;
|
|
desc->handle_irq(irq, desc);
|
|
} else {
|
|
|
|
switch (irq) {
|
|
case IRQ_PPI_ERROR:
|
|
bfin_write_PPI_STATUS(PPI_ERR_MASK);
|
|
break;
|
|
#if (defined(CONFIG_BF537) || defined(CONFIG_BF536))
|
|
case IRQ_MAC_ERROR:
|
|
bfin_write_EMAC_SYSTAT(EMAC_ERR_MASK);
|
|
break;
|
|
#endif
|
|
case IRQ_SPORT0_ERROR:
|
|
bfin_write_SPORT0_STAT(SPORT_ERR_MASK);
|
|
break;
|
|
|
|
case IRQ_SPORT1_ERROR:
|
|
bfin_write_SPORT1_STAT(SPORT_ERR_MASK);
|
|
break;
|
|
|
|
case IRQ_CAN_ERROR:
|
|
bfin_write_CAN_GIS(CAN_ERR_MASK);
|
|
break;
|
|
|
|
case IRQ_SPI_ERROR:
|
|
bfin_write_SPI_STAT(SPI_ERR_MASK);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pr_debug("IRQ %d:"
|
|
" MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
|
|
irq);
|
|
}
|
|
} else
|
|
printk(KERN_ERR
|
|
"%s : %s : LINE %d :\nIRQ ?: PERIPHERAL ERROR"
|
|
" INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
|
|
__FUNCTION__, __FILE__, __LINE__);
|
|
|
|
}
|
|
#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
|
|
|
|
#if !defined(CONFIG_BF54x)
|
|
|
|
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
|
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
|
|
|
|
|
static void bfin_gpio_ack_irq(unsigned int irq)
|
|
{
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
|
|
set_gpio_data(gpionr, 0);
|
|
SSYNC();
|
|
}
|
|
}
|
|
|
|
static void bfin_gpio_mask_ack_irq(unsigned int irq)
|
|
{
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
|
|
set_gpio_data(gpionr, 0);
|
|
SSYNC();
|
|
}
|
|
|
|
set_gpio_maska(gpionr, 0);
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_gpio_mask_irq(unsigned int irq)
|
|
{
|
|
set_gpio_maska(irq - IRQ_PF0, 0);
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_gpio_unmask_irq(unsigned int irq)
|
|
{
|
|
set_gpio_maska(irq - IRQ_PF0, 1);
|
|
SSYNC();
|
|
}
|
|
|
|
static unsigned int bfin_gpio_irq_startup(unsigned int irq)
|
|
{
|
|
unsigned int ret;
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
char buf[8];
|
|
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
snprintf(buf, sizeof buf, "IRQ %d", irq);
|
|
ret = gpio_request(gpionr, buf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
bfin_gpio_unmask_irq(irq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void bfin_gpio_irq_shutdown(unsigned int irq)
|
|
{
|
|
bfin_gpio_mask_irq(irq);
|
|
gpio_free(irq - IRQ_PF0);
|
|
gpio_enabled[gpio_bank(irq - IRQ_PF0)] &= ~gpio_bit(irq - IRQ_PF0);
|
|
}
|
|
|
|
static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
|
|
{
|
|
|
|
unsigned int ret;
|
|
char buf[8];
|
|
u16 gpionr = irq - IRQ_PF0;
|
|
|
|
if (type == IRQ_TYPE_PROBE) {
|
|
/* only probe unenabled GPIO interrupt lines */
|
|
if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
|
|
return 0;
|
|
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
|
|
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
snprintf(buf, sizeof buf, "IRQ %d", irq);
|
|
ret = gpio_request(gpionr, buf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
} else {
|
|
gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
return 0;
|
|
}
|
|
|
|
set_gpio_dir(gpionr, 0);
|
|
set_gpio_inen(gpionr, 1);
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
gpio_edge_triggered[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
set_gpio_edge(gpionr, 1);
|
|
} else {
|
|
set_gpio_edge(gpionr, 0);
|
|
gpio_edge_triggered[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
}
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
set_gpio_both(gpionr, 1);
|
|
else
|
|
set_gpio_both(gpionr, 0);
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
|
|
set_gpio_polar(gpionr, 1); /* low or falling edge denoted by one */
|
|
else
|
|
set_gpio_polar(gpionr, 0); /* high or rising edge denoted by zero */
|
|
|
|
SSYNC();
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
set_irq_handler(irq, handle_edge_irq);
|
|
else
|
|
set_irq_handler(irq, handle_level_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip bfin_gpio_irqchip = {
|
|
.ack = bfin_gpio_ack_irq,
|
|
.mask = bfin_gpio_mask_irq,
|
|
.mask_ack = bfin_gpio_mask_ack_irq,
|
|
.unmask = bfin_gpio_unmask_irq,
|
|
.set_type = bfin_gpio_irq_type,
|
|
.startup = bfin_gpio_irq_startup,
|
|
.shutdown = bfin_gpio_irq_shutdown
|
|
};
|
|
|
|
static void bfin_demux_gpio_irq(unsigned int intb_irq,
|
|
struct irq_desc *intb_desc)
|
|
{
|
|
u16 i;
|
|
struct irq_desc *desc;
|
|
|
|
for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
|
|
int irq = IRQ_PF0 + i;
|
|
int flag_d = get_gpiop_data(i);
|
|
int mask =
|
|
flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
|
|
|
|
while (mask) {
|
|
if (mask & 1) {
|
|
desc = irq_desc + irq;
|
|
desc->handle_irq(irq, desc);
|
|
}
|
|
irq++;
|
|
mask >>= 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
#else /* CONFIG_BF54x */
|
|
|
|
#define NR_PINT_SYS_IRQS 4
|
|
#define NR_PINT_BITS 32
|
|
#define NR_PINTS 160
|
|
#define IRQ_NOT_AVAIL 0xFF
|
|
|
|
#define PINT_2_BANK(x) ((x) >> 5)
|
|
#define PINT_2_BIT(x) ((x) & 0x1F)
|
|
#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
|
|
|
|
static unsigned char irq2pint_lut[NR_PINTS];
|
|
static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
|
|
|
|
static unsigned int gpio_both_edge_triggered[NR_PINT_SYS_IRQS];
|
|
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
|
|
|
|
|
|
struct pin_int_t {
|
|
unsigned int mask_set;
|
|
unsigned int mask_clear;
|
|
unsigned int request;
|
|
unsigned int assign;
|
|
unsigned int edge_set;
|
|
unsigned int edge_clear;
|
|
unsigned int invert_set;
|
|
unsigned int invert_clear;
|
|
unsigned int pinstate;
|
|
unsigned int latch;
|
|
};
|
|
|
|
static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
|
|
(struct pin_int_t *)PINT0_MASK_SET,
|
|
(struct pin_int_t *)PINT1_MASK_SET,
|
|
(struct pin_int_t *)PINT2_MASK_SET,
|
|
(struct pin_int_t *)PINT3_MASK_SET,
|
|
};
|
|
|
|
unsigned short get_irq_base(u8 bank, u8 bmap)
|
|
{
|
|
|
|
u16 irq_base;
|
|
|
|
if (bank < 2) { /*PA-PB */
|
|
irq_base = IRQ_PA0 + bmap * 16;
|
|
} else { /*PC-PJ */
|
|
irq_base = IRQ_PC0 + bmap * 16;
|
|
}
|
|
|
|
return irq_base;
|
|
|
|
}
|
|
|
|
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
|
|
void init_pint_lut(void)
|
|
{
|
|
u16 bank, bit, irq_base, bit_pos;
|
|
u32 pint_assign;
|
|
u8 bmap;
|
|
|
|
memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
|
|
|
|
for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
|
|
|
|
pint_assign = pint[bank]->assign;
|
|
|
|
for (bit = 0; bit < NR_PINT_BITS; bit++) {
|
|
|
|
bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
|
|
|
|
irq_base = get_irq_base(bank, bmap);
|
|
|
|
irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
|
|
bit_pos = bit + bank * NR_PINT_BITS;
|
|
|
|
pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
|
|
irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
static void bfin_gpio_ack_irq(unsigned int irq)
|
|
{
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u8 bank = PINT_2_BANK(pint_val);
|
|
|
|
if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
|
|
if (pint[bank]->invert_set & pintbit)
|
|
pint[bank]->invert_clear = pintbit;
|
|
else
|
|
pint[bank]->invert_set = pintbit;
|
|
}
|
|
pint[bank]->request = pintbit;
|
|
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_gpio_mask_ack_irq(unsigned int irq)
|
|
{
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u8 bank = PINT_2_BANK(pint_val);
|
|
|
|
if (unlikely(gpio_both_edge_triggered[bank] & pintbit)) {
|
|
if (pint[bank]->invert_set & pintbit)
|
|
pint[bank]->invert_clear = pintbit;
|
|
else
|
|
pint[bank]->invert_set = pintbit;
|
|
}
|
|
|
|
pint[bank]->request = pintbit;
|
|
pint[bank]->mask_clear = pintbit;
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_gpio_mask_irq(unsigned int irq)
|
|
{
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
|
|
pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_gpio_unmask_irq(unsigned int irq)
|
|
{
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u8 bank = PINT_2_BANK(pint_val);
|
|
|
|
pint[bank]->request = pintbit;
|
|
pint[bank]->mask_set = pintbit;
|
|
SSYNC();
|
|
}
|
|
|
|
static unsigned int bfin_gpio_irq_startup(unsigned int irq)
|
|
{
|
|
unsigned int ret;
|
|
char buf[8];
|
|
u16 gpionr = irq_to_gpio(irq);
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
|
|
if (pint_val == IRQ_NOT_AVAIL) {
|
|
printk(KERN_ERR
|
|
"GPIO IRQ %d :Not in PINT Assign table "
|
|
"Reconfigure Interrupt to Port Assignemt\n", irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
snprintf(buf, sizeof buf, "IRQ %d", irq);
|
|
ret = gpio_request(gpionr, buf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
bfin_gpio_unmask_irq(irq);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void bfin_gpio_irq_shutdown(unsigned int irq)
|
|
{
|
|
u16 gpionr = irq_to_gpio(irq);
|
|
|
|
bfin_gpio_mask_irq(irq);
|
|
gpio_free(gpionr);
|
|
gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
}
|
|
|
|
static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
|
|
{
|
|
|
|
unsigned int ret;
|
|
char buf[8];
|
|
u16 gpionr = irq_to_gpio(irq);
|
|
u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
|
|
u32 pintbit = PINT_BIT(pint_val);
|
|
u8 bank = PINT_2_BANK(pint_val);
|
|
|
|
if (pint_val == IRQ_NOT_AVAIL)
|
|
return -ENODEV;
|
|
|
|
if (type == IRQ_TYPE_PROBE) {
|
|
/* only probe unenabled GPIO interrupt lines */
|
|
if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
|
|
return 0;
|
|
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
|
|
IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
|
|
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
|
|
snprintf(buf, sizeof buf, "IRQ %d", irq);
|
|
ret = gpio_request(gpionr, buf);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
|
|
} else {
|
|
gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
|
|
return 0;
|
|
}
|
|
|
|
gpio_direction_input(gpionr);
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
|
|
pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
|
|
else
|
|
pint[bank]->invert_clear = pintbit; /* high or rising edge denoted by zero */
|
|
|
|
if ((type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
|
|
== (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
|
|
gpio_both_edge_triggered[bank] |= pintbit;
|
|
|
|
if (gpio_get_value(gpionr))
|
|
pint[bank]->invert_set = pintbit;
|
|
else
|
|
pint[bank]->invert_clear = pintbit;
|
|
} else {
|
|
gpio_both_edge_triggered[bank] &= ~pintbit;
|
|
}
|
|
|
|
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
|
|
pint[bank]->edge_set = pintbit;
|
|
set_irq_handler(irq, handle_edge_irq);
|
|
} else {
|
|
pint[bank]->edge_clear = pintbit;
|
|
set_irq_handler(irq, handle_level_irq);
|
|
}
|
|
|
|
SSYNC();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip bfin_gpio_irqchip = {
|
|
.ack = bfin_gpio_ack_irq,
|
|
.mask = bfin_gpio_mask_irq,
|
|
.mask_ack = bfin_gpio_mask_ack_irq,
|
|
.unmask = bfin_gpio_unmask_irq,
|
|
.set_type = bfin_gpio_irq_type,
|
|
.startup = bfin_gpio_irq_startup,
|
|
.shutdown = bfin_gpio_irq_shutdown
|
|
};
|
|
|
|
static void bfin_demux_gpio_irq(unsigned int intb_irq,
|
|
struct irq_desc *intb_desc)
|
|
{
|
|
u8 bank, pint_val;
|
|
u32 request, irq;
|
|
struct irq_desc *desc;
|
|
|
|
switch (intb_irq) {
|
|
case IRQ_PINT0:
|
|
bank = 0;
|
|
break;
|
|
case IRQ_PINT2:
|
|
bank = 2;
|
|
break;
|
|
case IRQ_PINT3:
|
|
bank = 3;
|
|
break;
|
|
case IRQ_PINT1:
|
|
bank = 1;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
pint_val = bank * NR_PINT_BITS;
|
|
|
|
request = pint[bank]->request;
|
|
|
|
while (request) {
|
|
if (request & 1) {
|
|
irq = pint2irq_lut[pint_val] + SYS_IRQS;
|
|
desc = irq_desc + irq;
|
|
desc->handle_irq(irq, desc);
|
|
}
|
|
pint_val++;
|
|
request >>= 1;
|
|
}
|
|
|
|
}
|
|
#endif
|
|
|
|
void __init init_exception_vectors(void)
|
|
{
|
|
SSYNC();
|
|
|
|
/* cannot program in software:
|
|
* evt0 - emulation (jtag)
|
|
* evt1 - reset
|
|
*/
|
|
bfin_write_EVT2(evt_nmi);
|
|
bfin_write_EVT3(trap);
|
|
bfin_write_EVT5(evt_ivhw);
|
|
bfin_write_EVT6(evt_timer);
|
|
bfin_write_EVT7(evt_evt7);
|
|
bfin_write_EVT8(evt_evt8);
|
|
bfin_write_EVT9(evt_evt9);
|
|
bfin_write_EVT10(evt_evt10);
|
|
bfin_write_EVT11(evt_evt11);
|
|
bfin_write_EVT12(evt_evt12);
|
|
bfin_write_EVT13(evt_evt13);
|
|
bfin_write_EVT14(evt14_softirq);
|
|
bfin_write_EVT15(evt_system_call);
|
|
CSYNC();
|
|
}
|
|
|
|
/*
|
|
* This function should be called during kernel startup to initialize
|
|
* the BFin IRQ handling routines.
|
|
*/
|
|
int __init init_arch_irq(void)
|
|
{
|
|
int irq;
|
|
unsigned long ilat = 0;
|
|
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
|
|
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
|
|
bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
|
|
bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
|
|
bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
|
|
bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
|
|
# ifdef CONFIG_BF54x
|
|
bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
|
|
bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
|
|
# endif
|
|
#else
|
|
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
|
|
bfin_write_SIC_IWR(IWR_ENABLE_ALL);
|
|
#endif
|
|
SSYNC();
|
|
|
|
local_irq_disable();
|
|
|
|
#ifdef CONFIG_BF54x
|
|
# ifdef CONFIG_PINTx_REASSIGN
|
|
pint[0]->assign = CONFIG_PINT0_ASSIGN;
|
|
pint[1]->assign = CONFIG_PINT1_ASSIGN;
|
|
pint[2]->assign = CONFIG_PINT2_ASSIGN;
|
|
pint[3]->assign = CONFIG_PINT3_ASSIGN;
|
|
# endif
|
|
/* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
|
|
init_pint_lut();
|
|
#endif
|
|
|
|
for (irq = 0; irq <= SYS_IRQS; irq++) {
|
|
if (irq <= IRQ_CORETMR)
|
|
set_irq_chip(irq, &bfin_core_irqchip);
|
|
else
|
|
set_irq_chip(irq, &bfin_internal_irqchip);
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
if (irq != IRQ_GENERIC_ERROR) {
|
|
#endif
|
|
|
|
switch (irq) {
|
|
#if defined(CONFIG_BF53x)
|
|
case IRQ_PROG_INTA:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
|
|
case IRQ_MAC_RX:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
# endif
|
|
#elif defined(CONFIG_BF54x)
|
|
case IRQ_PINT0:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
case IRQ_PINT1:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
case IRQ_PINT2:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
case IRQ_PINT3:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
#elif defined(CONFIG_BF52x)
|
|
case IRQ_PORTF_INTA:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
case IRQ_PORTG_INTA:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
case IRQ_PORTH_INTA:
|
|
set_irq_chained_handler(irq,
|
|
bfin_demux_gpio_irq);
|
|
break;
|
|
#endif
|
|
default:
|
|
set_irq_handler(irq, handle_simple_irq);
|
|
break;
|
|
}
|
|
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
} else {
|
|
set_irq_handler(irq, bfin_demux_error_irq);
|
|
}
|
|
#endif
|
|
}
|
|
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
|
|
for (irq = IRQ_PPI_ERROR; irq <= IRQ_UART1_ERROR; irq++) {
|
|
set_irq_chip(irq, &bfin_generic_error_irqchip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_BF54x
|
|
for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
|
|
#else
|
|
for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
|
|
#endif
|
|
set_irq_chip(irq, &bfin_gpio_irqchip);
|
|
/* if configured as edge, then will be changed to do_edge_IRQ */
|
|
set_irq_handler(irq, handle_level_irq);
|
|
}
|
|
|
|
bfin_write_IMASK(0);
|
|
CSYNC();
|
|
ilat = bfin_read_ILAT();
|
|
CSYNC();
|
|
bfin_write_ILAT(ilat);
|
|
CSYNC();
|
|
|
|
printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
|
|
/* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
|
|
* local_irq_enable()
|
|
*/
|
|
program_IAR();
|
|
/* Therefore it's better to setup IARs before interrupts enabled */
|
|
search_IAR();
|
|
|
|
/* Enable interrupts IVG7-15 */
|
|
irq_flags = irq_flags | IMASK_IVG15 |
|
|
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
|
|
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DO_IRQ_L1
|
|
__attribute__((l1_text))
|
|
#endif
|
|
void do_irq(int vec, struct pt_regs *fp)
|
|
{
|
|
if (vec == EVT_IVTMR_P) {
|
|
vec = IRQ_CORETMR;
|
|
} else {
|
|
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
|
|
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
|
|
#if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)
|
|
unsigned long sic_status[3];
|
|
|
|
SSYNC();
|
|
sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0();
|
|
sic_status[1] = bfin_read_SIC_ISR1() & bfin_read_SIC_IMASK1();
|
|
#ifdef CONFIG_BF54x
|
|
sic_status[2] = bfin_read_SIC_ISR2() & bfin_read_SIC_IMASK2();
|
|
#endif
|
|
for (;; ivg++) {
|
|
if (ivg >= ivg_stop) {
|
|
atomic_inc(&num_spurious);
|
|
return;
|
|
}
|
|
if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
|
|
break;
|
|
}
|
|
#else
|
|
unsigned long sic_status;
|
|
SSYNC();
|
|
sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
|
|
|
|
for (;; ivg++) {
|
|
if (ivg >= ivg_stop) {
|
|
atomic_inc(&num_spurious);
|
|
return;
|
|
} else if (sic_status & ivg->isrflag)
|
|
break;
|
|
}
|
|
#endif
|
|
vec = ivg->irqno;
|
|
}
|
|
asm_do_IRQ(vec, fp);
|
|
|
|
#ifdef CONFIG_KGDB
|
|
kgdb_process_breakpoint();
|
|
#endif
|
|
}
|