android_kernel_xiaomi_sm8350/arch/ppc/syslib/gen550_dbg.c

/*
 * A library of polled 16550 serial routines.  These are intended to
 * be used to support progress messages, xmon, kgdb, etc. on a
 * variety of platforms.
 *
 * Adapted from lots of code ripped from the arch/ppc/boot/ polled
 * 16550 support.
 *
 * Author: Matt Porter <mporter@mvista.com>
 *
 * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
 * the terms of the GNU General Public License version 2.  This program
 * is licensed "as is" without any warranty of any kind, whether express
 * or implied.
 */

#include <linux/types.h>
#include <linux/serial.h>
#include <linux/tty.h>		/* For linux/serial_core.h */
#include <linux/serial_core.h>
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <asm/machdep.h>
#include <asm/serial.h>
#include <asm/io.h>

#define SERIAL_BAUD	9600

/* SERIAL_PORT_DFNS is defined in <asm/serial.h> */
#ifndef SERIAL_PORT_DFNS
#define SERIAL_PORT_DFNS
#endif

static struct serial_state rs_table[RS_TABLE_SIZE] = {
	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
};

static void (*serial_outb)(unsigned long, unsigned char);
static unsigned long (*serial_inb)(unsigned long);

static int shift;

unsigned long direct_inb(unsigned long addr)
{
	return readb((void __iomem *)addr);
}

void direct_outb(unsigned long addr, unsigned char val)
{
	writeb(val, (void __iomem *)addr);
}

unsigned long io_inb(unsigned long port)
{
	return inb(port);
}

void io_outb(unsigned long port, unsigned char val)
{
	outb(val, port);
}

unsigned long serial_init(int chan, void *ignored)
{
	unsigned long com_port;
	unsigned char lcr, dlm;

	/* We need to find out which type io we're expecting.  If it's
	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
	switch (rs_table[chan].io_type) {
		case SERIAL_IO_PORT:
			com_port = rs_table[chan].port;
			serial_outb = io_outb;
			serial_inb = io_inb;
			break;
		case SERIAL_IO_MEM:
			com_port = (unsigned long)rs_table[chan].iomem_base;
			serial_outb = direct_outb;
			serial_inb = direct_inb;
			break;
		default:
			/* We can't deal with it. */
			return -1;
	}

	/* How far apart the registers are. */
	shift = rs_table[chan].iomem_reg_shift;

	/* save the LCR */
	lcr = serial_inb(com_port + (UART_LCR << shift));
	
	/* Access baud rate */
	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
	dlm = serial_inb(com_port + (UART_DLM << shift));

	/*
	 * Test if serial port is unconfigured
	 * We assume that no-one uses less than 110 baud or
	 * less than 7 bits per character these days.
	 *  -- paulus.
	 */
	if ((dlm <= 4) && (lcr & 2)) {
		/* port is configured, put the old LCR back */
		serial_outb(com_port + (UART_LCR << shift), lcr);
	}
	else {
		/* Input clock. */
		serial_outb(com_port + (UART_DLL << shift),
			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
		serial_outb(com_port + (UART_DLM << shift),
				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
		/* 8 data, 1 stop, no parity */
		serial_outb(com_port + (UART_LCR << shift), 0x03);
		/* RTS/DTR */
		serial_outb(com_port + (UART_MCR << shift), 0x03);

		/* Clear & enable FIFOs */
		serial_outb(com_port + (UART_FCR << shift), 0x07);
	}

	return (com_port);
}

void
serial_putc(unsigned long com_port, unsigned char c)
{
	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
		;
	serial_outb(com_port, c);
}

unsigned char
serial_getc(unsigned long com_port)
{
	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
		;
	return serial_inb(com_port);
}

int
serial_tstc(unsigned long com_port)
{
	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
}

void
serial_close(unsigned long com_port)
{
}

void
gen550_init(int i, struct uart_port *serial_req)
{
	rs_table[i].io_type = serial_req->iotype;
	rs_table[i].port = serial_req->iobase;
	rs_table[i].iomem_base = serial_req->membase;
	rs_table[i].iomem_reg_shift = serial_req->regshift;
	rs_table[i].baud_base = serial_req->uartclk ? serial_req->uartclk / 16 : BASE_BAUD;
}

#ifdef CONFIG_SERIAL_TEXT_DEBUG
void
gen550_progress(char *s, unsigned short hex)
{
	volatile unsigned int progress_debugport;
	volatile char c;

	progress_debugport = serial_init(0, NULL);

	serial_putc(progress_debugport, '\r');

	while ((c = *s++) != 0)
		serial_putc(progress_debugport, c);

	serial_putc(progress_debugport, '\n');
	serial_putc(progress_debugport, '\r');
}
#endif /* CONFIG_SERIAL_TEXT_DEBUG */