lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
0b56fd8c7a
android_kernel_xiaomi_sm8350/include/asm-arm/arch-pxa/pxa25x-udc.h
Russell King 284d115ec9 [ARM] pxa: separate PXA25x and PXA27x UDC register definitions 
The PXA25x and PXA27x USB device controller register definitions are
different.  Currently, they live side by side in pxa-regs.h, but only
one set is available depending on the setting of PXA25x or PXA27x.

This means that if we build to support both PXA25x and PXA27x, the
PXA27x definitions are unavailable, even to PXA27x specific code.

Remove these definitions from pxa-regs.h, and place them in separate
files.  Include these files where appropriate.

Note: according to the dependencies in drivers/usb/gadget/Kconfig,
we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the
platform devices from pxa27x.c and pxa3xx.c.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19 16:25:58 +01:00

164 lines
8.1 KiB
C
Raw Blame History

#ifndef _ASM_ARCH_PXA25X_UDC_H
#define _ASM_ARCH_PXA25X_UDC_H
#ifdef _ASM_ARCH_PXA27X_UDC_H
#error You can't include both PXA25x and PXA27x UDC support
#endif
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
#define UDCCR __REG(0x40600000) /* UDC Control Register */
#define UDCCR_UDE (1 << 0) /* UDC enable */
#define UDCCR_UDA (1 << 1) /* UDC active */
#define UDCCR_RSM (1 << 2) /* Device resume */
#define UDCCR_RESIR (1 << 3) /* Resume interrupt request */
#define UDCCR_SUSIR (1 << 4) /* Suspend interrupt request */
#define UDCCR_SRM (1 << 5) /* Suspend/resume interrupt mask */
#define UDCCR_RSTIR (1 << 6) /* Reset interrupt request */
#define UDCCR_REM (1 << 7) /* Reset interrupt mask */
#define UDCCS0 __REG(0x40600010) /* UDC Endpoint 0 Control/Status Register */
#define UDCCS0_OPR (1 << 0) /* OUT packet ready */
#define UDCCS0_IPR (1 << 1) /* IN packet ready */
#define UDCCS0_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS0_DRWF (1 << 3) /* Device remote wakeup feature */
#define UDCCS0_SST (1 << 4) /* Sent stall */
#define UDCCS0_FST (1 << 5) /* Force stall */
#define UDCCS0_RNE (1 << 6) /* Receive FIFO no empty */
#define UDCCS0_SA (1 << 7) /* Setup active */
/* Bulk IN - Endpoint 1,6,11 */
#define UDCCS1 __REG(0x40600014) /* UDC Endpoint 1 (IN) Control/Status Register */
#define UDCCS6 __REG(0x40600028) /* UDC Endpoint 6 (IN) Control/Status Register */
#define UDCCS11 __REG(0x4060003C) /* UDC Endpoint 11 (IN) Control/Status Register */
#define UDCCS_BI_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_BI_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_BI_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_BI_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_BI_SST (1 << 4) /* Sent stall */
#define UDCCS_BI_FST (1 << 5) /* Force stall */
#define UDCCS_BI_TSP (1 << 7) /* Transmit short packet */
/* Bulk OUT - Endpoint 2,7,12 */
#define UDCCS2 __REG(0x40600018) /* UDC Endpoint 2 (OUT) Control/Status Register */
#define UDCCS7 __REG(0x4060002C) /* UDC Endpoint 7 (OUT) Control/Status Register */
#define UDCCS12 __REG(0x40600040) /* UDC Endpoint 12 (OUT) Control/Status Register */
#define UDCCS_BO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_BO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_BO_DME (1 << 3) /* DMA enable */
#define UDCCS_BO_SST (1 << 4) /* Sent stall */
#define UDCCS_BO_FST (1 << 5) /* Force stall */
#define UDCCS_BO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_BO_RSP (1 << 7) /* Receive short packet */
/* Isochronous IN - Endpoint 3,8,13 */
#define UDCCS3 __REG(0x4060001C) /* UDC Endpoint 3 (IN) Control/Status Register */
#define UDCCS8 __REG(0x40600030) /* UDC Endpoint 8 (IN) Control/Status Register */
#define UDCCS13 __REG(0x40600044) /* UDC Endpoint 13 (IN) Control/Status Register */
#define UDCCS_II_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_II_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_II_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_II_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_II_TSP (1 << 7) /* Transmit short packet */
/* Isochronous OUT - Endpoint 4,9,14 */
#define UDCCS4 __REG(0x40600020) /* UDC Endpoint 4 (OUT) Control/Status Register */
#define UDCCS9 __REG(0x40600034) /* UDC Endpoint 9 (OUT) Control/Status Register */
#define UDCCS14 __REG(0x40600048) /* UDC Endpoint 14 (OUT) Control/Status Register */
#define UDCCS_IO_RFS (1 << 0) /* Receive FIFO service */
#define UDCCS_IO_RPC (1 << 1) /* Receive packet complete */
#define UDCCS_IO_ROF (1 << 2) /* Receive overflow */
#define UDCCS_IO_DME (1 << 3) /* DMA enable */
#define UDCCS_IO_RNE (1 << 6) /* Receive FIFO not empty */
#define UDCCS_IO_RSP (1 << 7) /* Receive short packet */
/* Interrupt IN - Endpoint 5,10,15 */
#define UDCCS5 __REG(0x40600024) /* UDC Endpoint 5 (Interrupt) Control/Status Register */
#define UDCCS10 __REG(0x40600038) /* UDC Endpoint 10 (Interrupt) Control/Status Register */
#define UDCCS15 __REG(0x4060004C) /* UDC Endpoint 15 (Interrupt) Control/Status Register */
#define UDCCS_INT_TFS (1 << 0) /* Transmit FIFO service */
#define UDCCS_INT_TPC (1 << 1) /* Transmit packet complete */
#define UDCCS_INT_FTF (1 << 2) /* Flush Tx FIFO */
#define UDCCS_INT_TUR (1 << 3) /* Transmit FIFO underrun */
#define UDCCS_INT_SST (1 << 4) /* Sent stall */
#define UDCCS_INT_FST (1 << 5) /* Force stall */
#define UDCCS_INT_TSP (1 << 7) /* Transmit short packet */
#define UFNRH __REG(0x40600060) /* UDC Frame Number Register High */
#define UFNRL __REG(0x40600064) /* UDC Frame Number Register Low */
#define UBCR2 __REG(0x40600068) /* UDC Byte Count Reg 2 */
#define UBCR4 __REG(0x4060006c) /* UDC Byte Count Reg 4 */
#define UBCR7 __REG(0x40600070) /* UDC Byte Count Reg 7 */
#define UBCR9 __REG(0x40600074) /* UDC Byte Count Reg 9 */
#define UBCR12 __REG(0x40600078) /* UDC Byte Count Reg 12 */
#define UBCR14 __REG(0x4060007c) /* UDC Byte Count Reg 14 */
#define UDDR0 __REG(0x40600080) /* UDC Endpoint 0 Data Register */
#define UDDR1 __REG(0x40600100) /* UDC Endpoint 1 Data Register */
#define UDDR2 __REG(0x40600180) /* UDC Endpoint 2 Data Register */
#define UDDR3 __REG(0x40600200) /* UDC Endpoint 3 Data Register */
#define UDDR4 __REG(0x40600400) /* UDC Endpoint 4 Data Register */
#define UDDR5 __REG(0x406000A0) /* UDC Endpoint 5 Data Register */
#define UDDR6 __REG(0x40600600) /* UDC Endpoint 6 Data Register */
#define UDDR7 __REG(0x40600680) /* UDC Endpoint 7 Data Register */
#define UDDR8 __REG(0x40600700) /* UDC Endpoint 8 Data Register */
#define UDDR9 __REG(0x40600900) /* UDC Endpoint 9 Data Register */
#define UDDR10 __REG(0x406000C0) /* UDC Endpoint 10 Data Register */
#define UDDR11 __REG(0x40600B00) /* UDC Endpoint 11 Data Register */
#define UDDR12 __REG(0x40600B80) /* UDC Endpoint 12 Data Register */
#define UDDR13 __REG(0x40600C00) /* UDC Endpoint 13 Data Register */
#define UDDR14 __REG(0x40600E00) /* UDC Endpoint 14 Data Register */
#define UDDR15 __REG(0x406000E0) /* UDC Endpoint 15 Data Register */
#define UICR0 __REG(0x40600050) /* UDC Interrupt Control Register 0 */
#define UICR0_IM0 (1 << 0) /* Interrupt mask ep 0 */
#define UICR0_IM1 (1 << 1) /* Interrupt mask ep 1 */
#define UICR0_IM2 (1 << 2) /* Interrupt mask ep 2 */
#define UICR0_IM3 (1 << 3) /* Interrupt mask ep 3 */
#define UICR0_IM4 (1 << 4) /* Interrupt mask ep 4 */
#define UICR0_IM5 (1 << 5) /* Interrupt mask ep 5 */
#define UICR0_IM6 (1 << 6) /* Interrupt mask ep 6 */
#define UICR0_IM7 (1 << 7) /* Interrupt mask ep 7 */
#define UICR1 __REG(0x40600054) /* UDC Interrupt Control Register 1 */
#define UICR1_IM8 (1 << 0) /* Interrupt mask ep 8 */
#define UICR1_IM9 (1 << 1) /* Interrupt mask ep 9 */
#define UICR1_IM10 (1 << 2) /* Interrupt mask ep 10 */
#define UICR1_IM11 (1 << 3) /* Interrupt mask ep 11 */
#define UICR1_IM12 (1 << 4) /* Interrupt mask ep 12 */
#define UICR1_IM13 (1 << 5) /* Interrupt mask ep 13 */
#define UICR1_IM14 (1 << 6) /* Interrupt mask ep 14 */
#define UICR1_IM15 (1 << 7) /* Interrupt mask ep 15 */
#define USIR0 __REG(0x40600058) /* UDC Status Interrupt Register 0 */
#define USIR0_IR0 (1 << 0) /* Interrupt request ep 0 */
#define USIR0_IR1 (1 << 1) /* Interrupt request ep 1 */
#define USIR0_IR2 (1 << 2) /* Interrupt request ep 2 */
#define USIR0_IR3 (1 << 3) /* Interrupt request ep 3 */
#define USIR0_IR4 (1 << 4) /* Interrupt request ep 4 */
#define USIR0_IR5 (1 << 5) /* Interrupt request ep 5 */
#define USIR0_IR6 (1 << 6) /* Interrupt request ep 6 */
#define USIR0_IR7 (1 << 7) /* Interrupt request ep 7 */
#define USIR1 __REG(0x4060005C) /* UDC Status Interrupt Register 1 */
#define USIR1_IR8 (1 << 0) /* Interrupt request ep 8 */
#define USIR1_IR9 (1 << 1) /* Interrupt request ep 9 */
#define USIR1_IR10 (1 << 2) /* Interrupt request ep 10 */
#define USIR1_IR11 (1 << 3) /* Interrupt request ep 11 */
#define USIR1_IR12 (1 << 4) /* Interrupt request ep 12 */
#define USIR1_IR13 (1 << 5) /* Interrupt request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrupt request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrupt request ep 15 */
#endif
Reference in New Issue View Git Blame Copy Permalink