0b83f1400f
Patch from Jon Ringle Updated 2898/1 per comments: - Removed fixup - Moved code in mach-mp1000/ to mach-clps711x/ - Cleaned up code in mp1000-seprom.c. Eliminated code that displayed the contents of the eeprom Please comment. Signed-off-by: Jon Ringle Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
727 lines
16 KiB
ArmAsm
727 lines
16 KiB
ArmAsm
/*
|
|
* linux/arch/arm/boot/compressed/head.S
|
|
*
|
|
* Copyright (C) 1996-2002 Russell King
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/config.h>
|
|
#include <linux/linkage.h>
|
|
|
|
/*
|
|
* Debugging stuff
|
|
*
|
|
* Note that these macros must not contain any code which is not
|
|
* 100% relocatable. Any attempt to do so will result in a crash.
|
|
* Please select one of the following when turning on debugging.
|
|
*/
|
|
#ifdef DEBUG
|
|
|
|
#include <asm/arch/debug-macro.S>
|
|
|
|
#if defined(CONFIG_DEBUG_ICEDCC)
|
|
.macro loadsp, rb
|
|
.endm
|
|
.macro writeb, ch, rb
|
|
mcr p14, 0, \ch, c0, c1, 0
|
|
.endm
|
|
#else
|
|
.macro writeb, ch, rb
|
|
senduart \ch, \rb
|
|
.endm
|
|
|
|
#if defined(CONFIG_FOOTBRIDGE) || \
|
|
defined(CONFIG_ARCH_RPC) || \
|
|
defined(CONFIG_ARCH_INTEGRATOR) || \
|
|
defined(CONFIG_ARCH_PXA) || \
|
|
defined(CONFIG_ARCH_IXP4XX) || \
|
|
defined(CONFIG_ARCH_IXP2000) || \
|
|
defined(CONFIG_ARCH_LH7A40X) || \
|
|
defined(CONFIG_ARCH_OMAP) || \
|
|
defined(CONFIG_MACH_MP1000)
|
|
.macro loadsp, rb
|
|
addruart \rb
|
|
.endm
|
|
#elif defined(CONFIG_ARCH_SA1100)
|
|
.macro loadsp, rb
|
|
mov \rb, #0x80000000 @ physical base address
|
|
# if defined(CONFIG_DEBUG_LL_SER3)
|
|
add \rb, \rb, #0x00050000 @ Ser3
|
|
# else
|
|
add \rb, \rb, #0x00010000 @ Ser1
|
|
# endif
|
|
.endm
|
|
#elif defined(CONFIG_ARCH_IOP331)
|
|
.macro loadsp, rb
|
|
mov \rb, #0xff000000
|
|
orr \rb, \rb, #0x00ff0000
|
|
orr \rb, \rb, #0x0000f700 @ location of the UART
|
|
.endm
|
|
#elif defined(CONFIG_ARCH_S3C2410)
|
|
.macro loadsp, rb
|
|
mov \rb, #0x50000000
|
|
add \rb, \rb, #0x4000 * CONFIG_S3C2410_LOWLEVEL_UART_PORT
|
|
.endm
|
|
#else
|
|
#error no serial architecture defined
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
.macro kputc,val
|
|
mov r0, \val
|
|
bl putc
|
|
.endm
|
|
|
|
.macro kphex,val,len
|
|
mov r0, \val
|
|
mov r1, #\len
|
|
bl phex
|
|
.endm
|
|
|
|
.macro debug_reloc_start
|
|
#ifdef DEBUG
|
|
kputc #'\n'
|
|
kphex r6, 8 /* processor id */
|
|
kputc #':'
|
|
kphex r7, 8 /* architecture id */
|
|
kputc #':'
|
|
mrc p15, 0, r0, c1, c0
|
|
kphex r0, 8 /* control reg */
|
|
kputc #'\n'
|
|
kphex r5, 8 /* decompressed kernel start */
|
|
kputc #'-'
|
|
kphex r8, 8 /* decompressed kernel end */
|
|
kputc #'>'
|
|
kphex r4, 8 /* kernel execution address */
|
|
kputc #'\n'
|
|
#endif
|
|
.endm
|
|
|
|
.macro debug_reloc_end
|
|
#ifdef DEBUG
|
|
kphex r5, 8 /* end of kernel */
|
|
kputc #'\n'
|
|
mov r0, r4
|
|
bl memdump /* dump 256 bytes at start of kernel */
|
|
#endif
|
|
.endm
|
|
|
|
.section ".start", #alloc, #execinstr
|
|
/*
|
|
* sort out different calling conventions
|
|
*/
|
|
.align
|
|
start:
|
|
.type start,#function
|
|
.rept 8
|
|
mov r0, r0
|
|
.endr
|
|
|
|
b 1f
|
|
.word 0x016f2818 @ Magic numbers to help the loader
|
|
.word start @ absolute load/run zImage address
|
|
.word _edata @ zImage end address
|
|
1: mov r7, r1 @ save architecture ID
|
|
mov r8, #0 @ save r0
|
|
|
|
#ifndef __ARM_ARCH_2__
|
|
/*
|
|
* Booting from Angel - need to enter SVC mode and disable
|
|
* FIQs/IRQs (numeric definitions from angel arm.h source).
|
|
* We only do this if we were in user mode on entry.
|
|
*/
|
|
mrs r2, cpsr @ get current mode
|
|
tst r2, #3 @ not user?
|
|
bne not_angel
|
|
mov r0, #0x17 @ angel_SWIreason_EnterSVC
|
|
swi 0x123456 @ angel_SWI_ARM
|
|
not_angel:
|
|
mrs r2, cpsr @ turn off interrupts to
|
|
orr r2, r2, #0xc0 @ prevent angel from running
|
|
msr cpsr_c, r2
|
|
#else
|
|
teqp pc, #0x0c000003 @ turn off interrupts
|
|
#endif
|
|
|
|
/*
|
|
* Note that some cache flushing and other stuff may
|
|
* be needed here - is there an Angel SWI call for this?
|
|
*/
|
|
|
|
/*
|
|
* some architecture specific code can be inserted
|
|
* by the linker here, but it should preserve r7 and r8.
|
|
*/
|
|
|
|
.text
|
|
adr r0, LC0
|
|
ldmia r0, {r1, r2, r3, r4, r5, r6, ip, sp}
|
|
subs r0, r0, r1 @ calculate the delta offset
|
|
|
|
@ if delta is zero, we are
|
|
beq not_relocated @ running at the address we
|
|
@ were linked at.
|
|
|
|
/*
|
|
* We're running at a different address. We need to fix
|
|
* up various pointers:
|
|
* r5 - zImage base address
|
|
* r6 - GOT start
|
|
* ip - GOT end
|
|
*/
|
|
add r5, r5, r0
|
|
add r6, r6, r0
|
|
add ip, ip, r0
|
|
|
|
#ifndef CONFIG_ZBOOT_ROM
|
|
/*
|
|
* If we're running fully PIC === CONFIG_ZBOOT_ROM = n,
|
|
* we need to fix up pointers into the BSS region.
|
|
* r2 - BSS start
|
|
* r3 - BSS end
|
|
* sp - stack pointer
|
|
*/
|
|
add r2, r2, r0
|
|
add r3, r3, r0
|
|
add sp, sp, r0
|
|
|
|
/*
|
|
* Relocate all entries in the GOT table.
|
|
*/
|
|
1: ldr r1, [r6, #0] @ relocate entries in the GOT
|
|
add r1, r1, r0 @ table. This fixes up the
|
|
str r1, [r6], #4 @ C references.
|
|
cmp r6, ip
|
|
blo 1b
|
|
#else
|
|
|
|
/*
|
|
* Relocate entries in the GOT table. We only relocate
|
|
* the entries that are outside the (relocated) BSS region.
|
|
*/
|
|
1: ldr r1, [r6, #0] @ relocate entries in the GOT
|
|
cmp r1, r2 @ entry < bss_start ||
|
|
cmphs r3, r1 @ _end < entry
|
|
addlo r1, r1, r0 @ table. This fixes up the
|
|
str r1, [r6], #4 @ C references.
|
|
cmp r6, ip
|
|
blo 1b
|
|
#endif
|
|
|
|
not_relocated: mov r0, #0
|
|
1: str r0, [r2], #4 @ clear bss
|
|
str r0, [r2], #4
|
|
str r0, [r2], #4
|
|
str r0, [r2], #4
|
|
cmp r2, r3
|
|
blo 1b
|
|
|
|
/*
|
|
* The C runtime environment should now be setup
|
|
* sufficiently. Turn the cache on, set up some
|
|
* pointers, and start decompressing.
|
|
*/
|
|
bl cache_on
|
|
|
|
mov r1, sp @ malloc space above stack
|
|
add r2, sp, #0x10000 @ 64k max
|
|
|
|
/*
|
|
* Check to see if we will overwrite ourselves.
|
|
* r4 = final kernel address
|
|
* r5 = start of this image
|
|
* r2 = end of malloc space (and therefore this image)
|
|
* We basically want:
|
|
* r4 >= r2 -> OK
|
|
* r4 + image length <= r5 -> OK
|
|
*/
|
|
cmp r4, r2
|
|
bhs wont_overwrite
|
|
add r0, r4, #4096*1024 @ 4MB largest kernel size
|
|
cmp r0, r5
|
|
bls wont_overwrite
|
|
|
|
mov r5, r2 @ decompress after malloc space
|
|
mov r0, r5
|
|
mov r3, r7
|
|
bl decompress_kernel
|
|
|
|
add r0, r0, #127
|
|
bic r0, r0, #127 @ align the kernel length
|
|
/*
|
|
* r0 = decompressed kernel length
|
|
* r1-r3 = unused
|
|
* r4 = kernel execution address
|
|
* r5 = decompressed kernel start
|
|
* r6 = processor ID
|
|
* r7 = architecture ID
|
|
* r8-r14 = unused
|
|
*/
|
|
add r1, r5, r0 @ end of decompressed kernel
|
|
adr r2, reloc_start
|
|
ldr r3, LC1
|
|
add r3, r2, r3
|
|
1: ldmia r2!, {r8 - r13} @ copy relocation code
|
|
stmia r1!, {r8 - r13}
|
|
ldmia r2!, {r8 - r13}
|
|
stmia r1!, {r8 - r13}
|
|
cmp r2, r3
|
|
blo 1b
|
|
|
|
bl cache_clean_flush
|
|
add pc, r5, r0 @ call relocation code
|
|
|
|
/*
|
|
* We're not in danger of overwriting ourselves. Do this the simple way.
|
|
*
|
|
* r4 = kernel execution address
|
|
* r7 = architecture ID
|
|
*/
|
|
wont_overwrite: mov r0, r4
|
|
mov r3, r7
|
|
bl decompress_kernel
|
|
b call_kernel
|
|
|
|
.type LC0, #object
|
|
LC0: .word LC0 @ r1
|
|
.word __bss_start @ r2
|
|
.word _end @ r3
|
|
.word zreladdr @ r4
|
|
.word _start @ r5
|
|
.word _got_start @ r6
|
|
.word _got_end @ ip
|
|
.word user_stack+4096 @ sp
|
|
LC1: .word reloc_end - reloc_start
|
|
.size LC0, . - LC0
|
|
|
|
#ifdef CONFIG_ARCH_RPC
|
|
.globl params
|
|
params: ldr r0, =params_phys
|
|
mov pc, lr
|
|
.ltorg
|
|
.align
|
|
#endif
|
|
|
|
/*
|
|
* Turn on the cache. We need to setup some page tables so that we
|
|
* can have both the I and D caches on.
|
|
*
|
|
* We place the page tables 16k down from the kernel execution address,
|
|
* and we hope that nothing else is using it. If we're using it, we
|
|
* will go pop!
|
|
*
|
|
* On entry,
|
|
* r4 = kernel execution address
|
|
* r6 = processor ID
|
|
* r7 = architecture number
|
|
* r8 = run-time address of "start"
|
|
* On exit,
|
|
* r1, r2, r3, r8, r9, r12 corrupted
|
|
* This routine must preserve:
|
|
* r4, r5, r6, r7
|
|
*/
|
|
.align 5
|
|
cache_on: mov r3, #8 @ cache_on function
|
|
b call_cache_fn
|
|
|
|
__setup_mmu: sub r3, r4, #16384 @ Page directory size
|
|
bic r3, r3, #0xff @ Align the pointer
|
|
bic r3, r3, #0x3f00
|
|
/*
|
|
* Initialise the page tables, turning on the cacheable and bufferable
|
|
* bits for the RAM area only.
|
|
*/
|
|
mov r0, r3
|
|
mov r8, r0, lsr #18
|
|
mov r8, r8, lsl #18 @ start of RAM
|
|
add r9, r8, #0x10000000 @ a reasonable RAM size
|
|
mov r1, #0x12
|
|
orr r1, r1, #3 << 10
|
|
add r2, r3, #16384
|
|
1: cmp r1, r8 @ if virt > start of RAM
|
|
orrhs r1, r1, #0x0c @ set cacheable, bufferable
|
|
cmp r1, r9 @ if virt > end of RAM
|
|
bichs r1, r1, #0x0c @ clear cacheable, bufferable
|
|
str r1, [r0], #4 @ 1:1 mapping
|
|
add r1, r1, #1048576
|
|
teq r0, r2
|
|
bne 1b
|
|
/*
|
|
* If ever we are running from Flash, then we surely want the cache
|
|
* to be enabled also for our execution instance... We map 2MB of it
|
|
* so there is no map overlap problem for up to 1 MB compressed kernel.
|
|
* If the execution is in RAM then we would only be duplicating the above.
|
|
*/
|
|
mov r1, #0x1e
|
|
orr r1, r1, #3 << 10
|
|
mov r2, pc, lsr #20
|
|
orr r1, r1, r2, lsl #20
|
|
add r0, r3, r2, lsl #2
|
|
str r1, [r0], #4
|
|
add r1, r1, #1048576
|
|
str r1, [r0]
|
|
mov pc, lr
|
|
|
|
__armv4_cache_on:
|
|
mov r12, lr
|
|
bl __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
mrc p15, 0, r0, c1, c0, 0 @ read control reg
|
|
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
|
|
orr r0, r0, #0x0030
|
|
bl __common_cache_on
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
|
|
mov pc, r12
|
|
|
|
__arm6_cache_on:
|
|
mov r12, lr
|
|
bl __setup_mmu
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
|
|
mov r0, #0x30
|
|
bl __common_cache_on
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
|
|
mov pc, r12
|
|
|
|
__common_cache_on:
|
|
#ifndef DEBUG
|
|
orr r0, r0, #0x000d @ Write buffer, mmu
|
|
#endif
|
|
mov r1, #-1
|
|
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
|
|
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
|
|
mcr p15, 0, r0, c1, c0, 0 @ load control register
|
|
mov pc, lr
|
|
|
|
/*
|
|
* All code following this line is relocatable. It is relocated by
|
|
* the above code to the end of the decompressed kernel image and
|
|
* executed there. During this time, we have no stacks.
|
|
*
|
|
* r0 = decompressed kernel length
|
|
* r1-r3 = unused
|
|
* r4 = kernel execution address
|
|
* r5 = decompressed kernel start
|
|
* r6 = processor ID
|
|
* r7 = architecture ID
|
|
* r8-r14 = unused
|
|
*/
|
|
.align 5
|
|
reloc_start: add r8, r5, r0
|
|
debug_reloc_start
|
|
mov r1, r4
|
|
1:
|
|
.rept 4
|
|
ldmia r5!, {r0, r2, r3, r9 - r13} @ relocate kernel
|
|
stmia r1!, {r0, r2, r3, r9 - r13}
|
|
.endr
|
|
|
|
cmp r5, r8
|
|
blo 1b
|
|
debug_reloc_end
|
|
|
|
call_kernel: bl cache_clean_flush
|
|
bl cache_off
|
|
mov r0, #0
|
|
mov r1, r7 @ restore architecture number
|
|
mov pc, r4 @ call kernel
|
|
|
|
/*
|
|
* Here follow the relocatable cache support functions for the
|
|
* various processors. This is a generic hook for locating an
|
|
* entry and jumping to an instruction at the specified offset
|
|
* from the start of the block. Please note this is all position
|
|
* independent code.
|
|
*
|
|
* r1 = corrupted
|
|
* r2 = corrupted
|
|
* r3 = block offset
|
|
* r6 = corrupted
|
|
* r12 = corrupted
|
|
*/
|
|
|
|
call_cache_fn: adr r12, proc_types
|
|
mrc p15, 0, r6, c0, c0 @ get processor ID
|
|
1: ldr r1, [r12, #0] @ get value
|
|
ldr r2, [r12, #4] @ get mask
|
|
eor r1, r1, r6 @ (real ^ match)
|
|
tst r1, r2 @ & mask
|
|
addeq pc, r12, r3 @ call cache function
|
|
add r12, r12, #4*5
|
|
b 1b
|
|
|
|
/*
|
|
* Table for cache operations. This is basically:
|
|
* - CPU ID match
|
|
* - CPU ID mask
|
|
* - 'cache on' method instruction
|
|
* - 'cache off' method instruction
|
|
* - 'cache flush' method instruction
|
|
*
|
|
* We match an entry using: ((real_id ^ match) & mask) == 0
|
|
*
|
|
* Writethrough caches generally only need 'on' and 'off'
|
|
* methods. Writeback caches _must_ have the flush method
|
|
* defined.
|
|
*/
|
|
.type proc_types,#object
|
|
proc_types:
|
|
.word 0x41560600 @ ARM6/610
|
|
.word 0xffffffe0
|
|
b __arm6_cache_off @ works, but slow
|
|
b __arm6_cache_off
|
|
mov pc, lr
|
|
@ b __arm6_cache_on @ untested
|
|
@ b __arm6_cache_off
|
|
@ b __armv3_cache_flush
|
|
|
|
.word 0x00000000 @ old ARM ID
|
|
.word 0x0000f000
|
|
mov pc, lr
|
|
mov pc, lr
|
|
mov pc, lr
|
|
|
|
.word 0x41007000 @ ARM7/710
|
|
.word 0xfff8fe00
|
|
b __arm7_cache_off
|
|
b __arm7_cache_off
|
|
mov pc, lr
|
|
|
|
.word 0x41807200 @ ARM720T (writethrough)
|
|
.word 0xffffff00
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
mov pc, lr
|
|
|
|
.word 0x00007000 @ ARM7 IDs
|
|
.word 0x0000f000
|
|
mov pc, lr
|
|
mov pc, lr
|
|
mov pc, lr
|
|
|
|
@ Everything from here on will be the new ID system.
|
|
|
|
.word 0x4401a100 @ sa110 / sa1100
|
|
.word 0xffffffe0
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
b __armv4_cache_flush
|
|
|
|
.word 0x6901b110 @ sa1110
|
|
.word 0xfffffff0
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
b __armv4_cache_flush
|
|
|
|
@ These match on the architecture ID
|
|
|
|
.word 0x00020000 @ ARMv4T
|
|
.word 0x000f0000
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
b __armv4_cache_flush
|
|
|
|
.word 0x00050000 @ ARMv5TE
|
|
.word 0x000f0000
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
b __armv4_cache_flush
|
|
|
|
.word 0x00060000 @ ARMv5TEJ
|
|
.word 0x000f0000
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
b __armv4_cache_flush
|
|
|
|
.word 0x00070000 @ ARMv6
|
|
.word 0x000f0000
|
|
b __armv4_cache_on
|
|
b __armv4_cache_off
|
|
b __armv6_cache_flush
|
|
|
|
.word 0 @ unrecognised type
|
|
.word 0
|
|
mov pc, lr
|
|
mov pc, lr
|
|
mov pc, lr
|
|
|
|
.size proc_types, . - proc_types
|
|
|
|
/*
|
|
* Turn off the Cache and MMU. ARMv3 does not support
|
|
* reading the control register, but ARMv4 does.
|
|
*
|
|
* On entry, r6 = processor ID
|
|
* On exit, r0, r1, r2, r3, r12 corrupted
|
|
* This routine must preserve: r4, r6, r7
|
|
*/
|
|
.align 5
|
|
cache_off: mov r3, #12 @ cache_off function
|
|
b call_cache_fn
|
|
|
|
__armv4_cache_off:
|
|
mrc p15, 0, r0, c1, c0
|
|
bic r0, r0, #0x000d
|
|
mcr p15, 0, r0, c1, c0 @ turn MMU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c7 @ invalidate whole cache v4
|
|
mcr p15, 0, r0, c8, c7 @ invalidate whole TLB v4
|
|
mov pc, lr
|
|
|
|
__arm6_cache_off:
|
|
mov r0, #0x00000030 @ ARM6 control reg.
|
|
b __armv3_cache_off
|
|
|
|
__arm7_cache_off:
|
|
mov r0, #0x00000070 @ ARM7 control reg.
|
|
b __armv3_cache_off
|
|
|
|
__armv3_cache_off:
|
|
mcr p15, 0, r0, c1, c0, 0 @ turn MMU and cache off
|
|
mov r0, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mcr p15, 0, r0, c5, c0, 0 @ invalidate whole TLB v3
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Clean and flush the cache to maintain consistency.
|
|
*
|
|
* On entry,
|
|
* r6 = processor ID
|
|
* On exit,
|
|
* r1, r2, r3, r11, r12 corrupted
|
|
* This routine must preserve:
|
|
* r0, r4, r5, r6, r7
|
|
*/
|
|
.align 5
|
|
cache_clean_flush:
|
|
mov r3, #16
|
|
b call_cache_fn
|
|
|
|
__armv6_cache_flush:
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
|
|
mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
|
|
mcr p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv4_cache_flush:
|
|
mov r2, #64*1024 @ default: 32K dcache size (*2)
|
|
mov r11, #32 @ default: 32 byte line size
|
|
mrc p15, 0, r3, c0, c0, 1 @ read cache type
|
|
teq r3, r6 @ cache ID register present?
|
|
beq no_cache_id
|
|
mov r1, r3, lsr #18
|
|
and r1, r1, #7
|
|
mov r2, #1024
|
|
mov r2, r2, lsl r1 @ base dcache size *2
|
|
tst r3, #1 << 14 @ test M bit
|
|
addne r2, r2, r2, lsr #1 @ +1/2 size if M == 1
|
|
mov r3, r3, lsr #12
|
|
and r3, r3, #3
|
|
mov r11, #8
|
|
mov r11, r11, lsl r3 @ cache line size in bytes
|
|
no_cache_id:
|
|
bic r1, pc, #63 @ align to longest cache line
|
|
add r2, r1, r2
|
|
1: ldr r3, [r1], r11 @ s/w flush D cache
|
|
teq r1, r2
|
|
bne 1b
|
|
|
|
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
|
|
mcr p15, 0, r1, c7, c6, 0 @ flush D cache
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain WB
|
|
mov pc, lr
|
|
|
|
__armv3_cache_flush:
|
|
mov r1, #0
|
|
mcr p15, 0, r0, c7, c0, 0 @ invalidate whole cache v3
|
|
mov pc, lr
|
|
|
|
/*
|
|
* Various debugging routines for printing hex characters and
|
|
* memory, which again must be relocatable.
|
|
*/
|
|
#ifdef DEBUG
|
|
.type phexbuf,#object
|
|
phexbuf: .space 12
|
|
.size phexbuf, . - phexbuf
|
|
|
|
phex: adr r3, phexbuf
|
|
mov r2, #0
|
|
strb r2, [r3, r1]
|
|
1: subs r1, r1, #1
|
|
movmi r0, r3
|
|
bmi puts
|
|
and r2, r0, #15
|
|
mov r0, r0, lsr #4
|
|
cmp r2, #10
|
|
addge r2, r2, #7
|
|
add r2, r2, #'0'
|
|
strb r2, [r3, r1]
|
|
b 1b
|
|
|
|
puts: loadsp r3
|
|
1: ldrb r2, [r0], #1
|
|
teq r2, #0
|
|
moveq pc, lr
|
|
2: writeb r2, r3
|
|
mov r1, #0x00020000
|
|
3: subs r1, r1, #1
|
|
bne 3b
|
|
teq r2, #'\n'
|
|
moveq r2, #'\r'
|
|
beq 2b
|
|
teq r0, #0
|
|
bne 1b
|
|
mov pc, lr
|
|
putc:
|
|
mov r2, r0
|
|
mov r0, #0
|
|
loadsp r3
|
|
b 2b
|
|
|
|
memdump: mov r12, r0
|
|
mov r10, lr
|
|
mov r11, #0
|
|
2: mov r0, r11, lsl #2
|
|
add r0, r0, r12
|
|
mov r1, #8
|
|
bl phex
|
|
mov r0, #':'
|
|
bl putc
|
|
1: mov r0, #' '
|
|
bl putc
|
|
ldr r0, [r12, r11, lsl #2]
|
|
mov r1, #8
|
|
bl phex
|
|
and r0, r11, #7
|
|
teq r0, #3
|
|
moveq r0, #' '
|
|
bleq putc
|
|
and r0, r11, #7
|
|
add r11, r11, #1
|
|
teq r0, #7
|
|
bne 1b
|
|
mov r0, #'\n'
|
|
bl putc
|
|
cmp r11, #64
|
|
blt 2b
|
|
mov pc, r10
|
|
#endif
|
|
|
|
reloc_end:
|
|
|
|
.align
|
|
.section ".stack", "w"
|
|
user_stack: .space 4096
|