105c31df6f
We currently have a few variants of fsl-booke processors (e500v1, e500v2, e500mc, and e200). They all have minor differences that we had previously been handling via ifdefs. To move towards having this support the following changes have been made: * PID1, PID2 only exist on e500v1 & e500v2 and should not be accessed on e500mc or e200. We use MMUCFG[NPIDS] to determine which case we are since we only touch PID1/2 in extremely early init code. * Not all IVORs exist on all the processors so introduce cpu_setup functions for each variant to setup the proper IVORs that are either unique or exist but have some variations between the processors Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
134 lines
4.0 KiB
Makefile
134 lines
4.0 KiB
Makefile
#
|
|
# Makefile for the linux kernel.
|
|
#
|
|
|
|
CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"'
|
|
|
|
ifeq ($(CONFIG_PPC64),y)
|
|
CFLAGS_prom_init.o += -mno-minimal-toc
|
|
endif
|
|
ifeq ($(CONFIG_PPC32),y)
|
|
CFLAGS_prom_init.o += -fPIC
|
|
CFLAGS_btext.o += -fPIC
|
|
endif
|
|
|
|
ifdef CONFIG_FUNCTION_TRACER
|
|
# Do not trace early boot code
|
|
CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
|
|
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
|
|
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
|
|
CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
|
|
|
|
ifdef CONFIG_DYNAMIC_FTRACE
|
|
# dynamic ftrace setup.
|
|
CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
|
|
endif
|
|
|
|
endif
|
|
|
|
obj-y := cputable.o ptrace.o syscalls.o \
|
|
irq.o align.o signal_32.o pmc.o vdso.o \
|
|
init_task.o process.o systbl.o idle.o \
|
|
signal.o sysfs.o cacheinfo.o
|
|
obj-y += vdso32/
|
|
obj-$(CONFIG_PPC64) += setup_64.o sys_ppc32.o \
|
|
signal_64.o ptrace32.o \
|
|
paca.o cpu_setup_ppc970.o \
|
|
cpu_setup_pa6t.o \
|
|
firmware.o nvram_64.o
|
|
obj64-$(CONFIG_RELOCATABLE) += reloc_64.o
|
|
obj-$(CONFIG_PPC64) += vdso64/
|
|
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
|
|
obj-$(CONFIG_PPC_970_NAP) += idle_power4.o
|
|
obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o
|
|
obj-$(CONFIG_PPC_CLOCK) += clock.o
|
|
procfs-$(CONFIG_PPC64) := proc_ppc64.o
|
|
obj-$(CONFIG_PROC_FS) += $(procfs-y)
|
|
rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o
|
|
obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y)
|
|
obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o
|
|
obj-$(CONFIG_RTAS_PROC) += rtas-proc.o
|
|
obj-$(CONFIG_LPARCFG) += lparcfg.o
|
|
obj-$(CONFIG_IBMVIO) += vio.o
|
|
obj-$(CONFIG_IBMEBUS) += ibmebus.o
|
|
obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o
|
|
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
|
|
obj-$(CONFIG_E500) += idle_e500.o
|
|
obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
|
|
obj-$(CONFIG_TAU) += tau_6xx.o
|
|
obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \
|
|
swsusp_$(CONFIG_WORD_SIZE).o
|
|
obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o
|
|
obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o
|
|
obj-$(CONFIG_44x) += cpu_setup_44x.o
|
|
obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o
|
|
|
|
extra-$(CONFIG_PPC_STD_MMU) := head_32.o
|
|
extra-$(CONFIG_PPC64) := head_64.o
|
|
extra-$(CONFIG_40x) := head_40x.o
|
|
extra-$(CONFIG_44x) := head_44x.o
|
|
extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o
|
|
extra-$(CONFIG_8xx) := head_8xx.o
|
|
extra-y += vmlinux.lds
|
|
|
|
obj-y += time.o prom.o traps.o setup-common.o \
|
|
udbg.o misc.o io.o dma.o \
|
|
misc_$(CONFIG_WORD_SIZE).o
|
|
obj-$(CONFIG_PPC32) += entry_32.o setup_32.o
|
|
obj-$(CONFIG_PPC64) += dma-iommu.o iommu.o
|
|
obj-$(CONFIG_KGDB) += kgdb.o
|
|
obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o
|
|
obj-$(CONFIG_MODULES) += ppc_ksyms.o
|
|
obj-$(CONFIG_BOOTX_TEXT) += btext.o
|
|
obj-$(CONFIG_SMP) += smp.o
|
|
obj-$(CONFIG_KPROBES) += kprobes.o
|
|
obj-$(CONFIG_PPC_UDBG_16550) += legacy_serial.o udbg_16550.o
|
|
obj-$(CONFIG_STACKTRACE) += stacktrace.o
|
|
|
|
pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o
|
|
obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \
|
|
pci-common.o
|
|
obj-$(CONFIG_PCI_MSI) += msi.o
|
|
obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \
|
|
machine_kexec_$(CONFIG_WORD_SIZE).o
|
|
obj-$(CONFIG_AUDIT) += audit.o
|
|
obj64-$(CONFIG_AUDIT) += compat_audit.o
|
|
|
|
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
|
|
|
|
obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o
|
|
|
|
ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
|
|
obj-y += iomap.o
|
|
endif
|
|
|
|
obj-$(CONFIG_PPC64) += $(obj64-y)
|
|
|
|
ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
|
|
obj-y += ppc_save_regs.o
|
|
endif
|
|
|
|
extra-$(CONFIG_PPC_FPU) += fpu.o
|
|
extra-$(CONFIG_PPC64) += entry_64.o
|
|
|
|
extra-y += systbl_chk.i
|
|
$(obj)/systbl.o: systbl_chk
|
|
|
|
quiet_cmd_systbl_chk = CALL $<
|
|
cmd_systbl_chk = $(CONFIG_SHELL) $< $(obj)/systbl_chk.i
|
|
|
|
PHONY += systbl_chk
|
|
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
|
|
$(call cmd,systbl_chk)
|
|
|
|
$(obj)/built-in.o: prom_init_check
|
|
|
|
quiet_cmd_prom_init_check = CALL $<
|
|
cmd_prom_init_check = $(CONFIG_SHELL) $< "$(NM)" "$(obj)/prom_init.o"
|
|
|
|
PHONY += prom_init_check
|
|
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
|
|
$(call cmd,prom_init_check)
|
|
|
|
clean-files := vmlinux.lds
|