316240f66a
This patch is for supporting Epson s1d13xxx framebuffer device for m32r. # Sorry, a little bigger. The Epson s1d13806 is already supported by 2.6.12 kernel, and its driver is placed as drivers/video/s1d13xxxfb.c. For the m32r, a header file include/asm-m32r/s1d13806.h was prepared for several m32r target platforms. It was originally generated by an Epson tool S1D13806CFG.EXE, and modified manually for the m32r platforms. Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
209 lines
5.7 KiB
C
209 lines
5.7 KiB
C
/*
|
|
* linux/arch/m32r/kernel/setup_mappi2.c
|
|
*
|
|
* Setup routines for Renesas MAPPI-II(M3A-ZA36) Board
|
|
*
|
|
* Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
|
|
* Hitoshi Yamamoto, Mamoru Sakugawa
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/m32r.h>
|
|
#include <asm/io.h>
|
|
|
|
#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
|
|
|
|
#ifndef CONFIG_SMP
|
|
typedef struct {
|
|
unsigned long icucr; /* ICU Control Register */
|
|
} icu_data_t;
|
|
#endif /* CONFIG_SMP */
|
|
|
|
icu_data_t icu_data[NR_IRQS];
|
|
|
|
static void disable_mappi2_irq(unsigned int irq)
|
|
{
|
|
unsigned long port, data;
|
|
|
|
if ((irq == 0) ||(irq >= NR_IRQS)) {
|
|
printk("bad irq 0x%08x\n", irq);
|
|
return;
|
|
}
|
|
port = irq2port(irq);
|
|
data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
|
|
outl(data, port);
|
|
}
|
|
|
|
static void enable_mappi2_irq(unsigned int irq)
|
|
{
|
|
unsigned long port, data;
|
|
|
|
if ((irq == 0) ||(irq >= NR_IRQS)) {
|
|
printk("bad irq 0x%08x\n", irq);
|
|
return;
|
|
}
|
|
port = irq2port(irq);
|
|
data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
|
|
outl(data, port);
|
|
}
|
|
|
|
static void mask_and_ack_mappi2(unsigned int irq)
|
|
{
|
|
disable_mappi2_irq(irq);
|
|
}
|
|
|
|
static void end_mappi2_irq(unsigned int irq)
|
|
{
|
|
enable_mappi2_irq(irq);
|
|
}
|
|
|
|
static unsigned int startup_mappi2_irq(unsigned int irq)
|
|
{
|
|
enable_mappi2_irq(irq);
|
|
return (0);
|
|
}
|
|
|
|
static void shutdown_mappi2_irq(unsigned int irq)
|
|
{
|
|
unsigned long port;
|
|
|
|
port = irq2port(irq);
|
|
outl(M32R_ICUCR_ILEVEL7, port);
|
|
}
|
|
|
|
static struct hw_interrupt_type mappi2_irq_type =
|
|
{
|
|
.typename = "MAPPI2-IRQ",
|
|
.startup = startup_mappi2_irq,
|
|
.shutdown = shutdown_mappi2_irq,
|
|
.enable = enable_mappi2_irq,
|
|
.disable = disable_mappi2_irq,
|
|
.ack = mask_and_ack_mappi2,
|
|
.end = end_mappi2_irq
|
|
};
|
|
|
|
void __init init_IRQ(void)
|
|
{
|
|
#if defined(CONFIG_SMC91X)
|
|
/* INT0 : LAN controller (SMC91111) */
|
|
irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_INT0].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_INT0].action = 0;
|
|
irq_desc[M32R_IRQ_INT0].depth = 1;
|
|
icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
|
|
disable_mappi2_irq(M32R_IRQ_INT0);
|
|
#endif /* CONFIG_SMC91X */
|
|
|
|
/* MFT2 : system timer */
|
|
irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_MFT2].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_MFT2].action = 0;
|
|
irq_desc[M32R_IRQ_MFT2].depth = 1;
|
|
icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
|
|
disable_mappi2_irq(M32R_IRQ_MFT2);
|
|
|
|
#ifdef CONFIG_SERIAL_M32R_SIO
|
|
/* SIO0_R : uart receive data */
|
|
irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_SIO0_R].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_SIO0_R].action = 0;
|
|
irq_desc[M32R_IRQ_SIO0_R].depth = 1;
|
|
icu_data[M32R_IRQ_SIO0_R].icucr = 0;
|
|
disable_mappi2_irq(M32R_IRQ_SIO0_R);
|
|
|
|
/* SIO0_S : uart send data */
|
|
irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_SIO0_S].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_SIO0_S].action = 0;
|
|
irq_desc[M32R_IRQ_SIO0_S].depth = 1;
|
|
icu_data[M32R_IRQ_SIO0_S].icucr = 0;
|
|
disable_mappi2_irq(M32R_IRQ_SIO0_S);
|
|
/* SIO1_R : uart receive data */
|
|
irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_SIO1_R].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_SIO1_R].action = 0;
|
|
irq_desc[M32R_IRQ_SIO1_R].depth = 1;
|
|
icu_data[M32R_IRQ_SIO1_R].icucr = 0;
|
|
disable_mappi2_irq(M32R_IRQ_SIO1_R);
|
|
|
|
/* SIO1_S : uart send data */
|
|
irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_SIO1_S].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_SIO1_S].action = 0;
|
|
irq_desc[M32R_IRQ_SIO1_S].depth = 1;
|
|
icu_data[M32R_IRQ_SIO1_S].icucr = 0;
|
|
disable_mappi2_irq(M32R_IRQ_SIO1_S);
|
|
#endif /* CONFIG_M32R_USE_DBG_CONSOLE */
|
|
|
|
#if defined(CONFIG_USB)
|
|
/* INT1 : USB Host controller interrupt */
|
|
irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED;
|
|
irq_desc[M32R_IRQ_INT1].handler = &mappi2_irq_type;
|
|
irq_desc[M32R_IRQ_INT1].action = 0;
|
|
irq_desc[M32R_IRQ_INT1].depth = 1;
|
|
icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01;
|
|
disable_mappi2_irq(M32R_IRQ_INT1);
|
|
#endif /* CONFIG_USB */
|
|
|
|
/* ICUCR40: CFC IREQ */
|
|
irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED;
|
|
irq_desc[PLD_IRQ_CFIREQ].handler = &mappi2_irq_type;
|
|
irq_desc[PLD_IRQ_CFIREQ].action = 0;
|
|
irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */
|
|
icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
|
|
disable_mappi2_irq(PLD_IRQ_CFIREQ);
|
|
|
|
#if defined(CONFIG_M32R_CFC)
|
|
/* ICUCR41: CFC Insert */
|
|
irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED;
|
|
irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi2_irq_type;
|
|
irq_desc[PLD_IRQ_CFC_INSERT].action = 0;
|
|
irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */
|
|
icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00;
|
|
disable_mappi2_irq(PLD_IRQ_CFC_INSERT);
|
|
|
|
/* ICUCR42: CFC Eject */
|
|
irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED;
|
|
irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi2_irq_type;
|
|
irq_desc[PLD_IRQ_CFC_EJECT].action = 0;
|
|
irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */
|
|
icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
|
|
disable_mappi2_irq(PLD_IRQ_CFC_EJECT);
|
|
#endif /* CONFIG_MAPPI2_CFC */
|
|
}
|
|
|
|
#define LAN_IOSTART 0x300
|
|
#define LAN_IOEND 0x320
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = (LAN_IOSTART),
|
|
.end = (LAN_IOEND),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = M32R_IRQ_INT0,
|
|
.end = M32R_IRQ_INT0,
|
|
.flags = IORESOURCE_IRQ,
|
|
}
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static int __init platform_init(void)
|
|
{
|
|
platform_device_register(&smc91x_device);
|
|
return 0;
|
|
}
|
|
arch_initcall(platform_init);
|